DS-3T1310P-SI/HS

Smart Managed 8-Port 10/100 Mbps PoE Switch

Smart managed switches are developed by Hikvision, featuring easy management and maintenance. You can easily deploy,
monitor, and expand your surveillance system anytime and anywhere with our software platforms. You can view the network
topology, monitor the health of the network, and receive device alarms in real time, which greatly reduces the cost of
network operation and maintenance.

 Visualized topology management.

 Network health monitor.
 Layer 2 features: PoE watchdog, STP/RSTP, VLAN, SNMP, QoS, ERPS, etc.
 IP40 rating with intrusion and moisture protection.
 -30 °C to 65 °C wide temperature range in harsh environment.

Specification
Model DS-3T1310P-SI/HS
Ports 8 × 10/100 Mbps PoE port,1 × 1 Gbps RJ45 port,1 × 1 Gbps fiber optical port
Port Type RJ45 port,full duplex,MDIMDI-X adaptive
Standard IEEE 802.3,IEEE 802.3ab,IEEE 802.3u,IEEE 802.3z,IEEE 802.3x
Forwarding Mode Store-and-forward switching
Network
Working Mode Standard mode (default)
Parameters
MAC Address Table 16 K
Switching Capacity 5.6 Gbps
Packet Forwarding Rate 4.16 Mpps
Internal Cache 4 Mbits
PoE Standard IEEE 802.3af,IEEE 802.3at
End-span: 1/2(-), 3/6(+)
PoE Power Pin Mid-span: 4/5(+), 7/8(-)
PoE Power
8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
Supply
PoE Port PoE: Ports 1 to 8
Max. Port Power 30 W
PoE Power Budget 110 W
Support remote upgrade, default parameter restoration, logs viewing, basic network
Device Maintenance
parameter configuration, import and export configuration, and time synchronization.
Port Configuration Support port rate configuration, flow control, and ports enabling.
Long Range Ports 1 to 8: up to 300 m
PoE watchdog: Ports 1 to 8 auto detect and restart the cameras that do not respond.
PoE Configuration
PoE enabling: supported
Port Mirroring Supported
Software Port Isolation Ports in an isolation group cannot communicate with each other.
Function QoS WRR and SP scheduling and port priority
VLAN 4094 VLANs
STP STP and RSTP
SNMPv1 and SNMPv2c supported for obtaining node information of the system and
SNMP
interfaces
LLDP LLDP supported for port configuration, global configuration, and neighbour discovery
DHCP Supported
ERPS Supported
Shell Metal material
Net Weight 0.6 kg (1.3 lb)
Gross Weight 1.2 kg (2.6 lb)
Dimensions (W × H × D) 197.00 mm × 114.20 mm × 42.20 mm (7.70'' × 4.40'' × 1.60'')
General Operating Temperature -30 °C to 65 °C (-22 °F to 149 °F)
Storage Temperature -40 °C to 85 °C (-40 °F to 185 °F)
Operating Humidity 5% to 95% (no condensation)
Relative Humidity 5% to 95% (no condensation)
Power Supply Power adapter: 48 V DC (working temperature: 0 °C to 45 °C); Grounding terminal:
 48-57 V DC (working temperature: -30 °C to 65 °C)
Max. Power
120 W
Consumption
Power Consumption in
<5W
Idle
FCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019,
EMC EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC
(ICES-003: Issue 6); RCM (AS/NZS CISPR 32: 2015)
Approval UL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014
Safety (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2:
2013, EN 62368-1: 2014+A11: 2017)
Chemistry CE-RoHS (2011/65/EU); WEEE (2012/19/EU); Reach (Regulation (EC) No.1907/2006)


Available Model
DS-3T1310P-SI/HS


Typical Application

Physical Interface
Front Panel

Side Panel

No. Indicator/Port Description

 Solid on: The port is connected.
LINK/ACT
1  Flashing: The port is transmitting data.
Indicator
 Unlit: The port is disconnected or connection is abnormal.
 Solid on: The switch supplies power to a powered device (PD) normally.
2 PoE Indicator
 Unlit: The switch is disconnected from a PD or power supply is abnormal.
 Solid on: The switch is powered on normally.
3 PWR Indicator
 Unlit: No power supply is connected or power supply is abnormal.
 Solid on: The gigabit SFP fiber optical port is connected.
4 G2 Port Indicator  Flashing: The gigabit SFP fiber optical port is transmitting data.
 Unlit: The gigabit SFP fiber optical port is disconnected or connection is abnormal.
 Solid on/Flashing: The output power of the switch is about to reach the upper limit. The power supply
PoE-MAX
5 may be abnormal if more devices are connected.
Indicator
 Unlit: The switch supplies power to a PD normally.
100 Mbps PoE
6 Used for connection to a PD via a network cable.
RJ45 Port
7 Gigabit RJ45 Port Used for connection to another device via a network cable.
Gigabit SFP Fiber
8 Used for connection to another device via an optical fiber when plugged into with an optical module.
Optical Port
9 Reset Button Used for restoring all the configurations of the switch to the default settings.
10 Power Supply Use the attached power cord to connect the switch to a socket.
Grounding
11 Used for connecting to the grounding cable to protect the switch from lightning.
Terminal

Dimension


Accessory
 Optional

HK-SFP-1.25G-20-1310 DRL-48V75W1AZ HK-SFP-1.25G-20-1310-DF DRL-48V240W1EN HK-SFP-1.25G-20-1550

HK-SFP-1.25G-1310-DF-MM