Scribd
Upload
32 views2 pages

BaroVUE10 Spec

The BaroVUE™10 is a digital barometer designed for environmental and meteorological applications, offering high accuracy and stability with a pressure range of 500 to 1100 hPa. It features zero downtime recalibration, easy sensor card replacement, and compatibility with SDI-12 devices, making it user-friendly and cost-effective. The device operates in a wide temperature range and provides reliable digital outputs, ensuring minimal measurement uncertainty.

Uploaded by

natalianaranjo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
32 views2 pages

BaroVUE10 Spec

The BaroVUE™10 is a digital barometer designed for environmental and meteorological applications, offering high accuracy and stability with a pressure range of 500 to 1100 hPa. It features zero downtime recalibration, easy sensor card replacement, and compatibility with SDI-12 devices, making it user-friendly and cost-effective. The device operates in a wide temperature range and provides reliable digital outputs, ensuring minimal measurement uncertainty.

Uploaded by

natalianaranjo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PRODUCT

BaroVUE10
Digital Barometer

Perfect for
Environmental
and
Meteorological
Applications
User friendly, cost effective, and
best-in-class accuracy and
stability

Overview
The BaroVUE™10 is a highly accurate barometer that can The sensor card for the BaroVUE™10 is pre-calibrated.
measure pressures over a range of 500 to 1100 hPa and can Replacement sensor cards are also pre-calibrated, requiring
be used in a range of applications that includes meteorology only one trip to the field station and no downtime.
and hydrology. This sensor includes our zero downtime The design of the BaroVUE™10 allows you to remove and
recalibration. Other sensors on the market need to be taken replace your sensor card quickly and easily without either
offline and sent back to the manufacturer to be recalibrated, having to disassemble the equipment in the enclosure or
often for weeks at a time, causing a loss in valuable data and having to send the equipment back to the manufacturer.
time, as well as an additional expense.

Benefits and Features


Highly reliable measurements (multiple cells) Zero downtime/recalibration
Direct-to-digital measurements Easy firmware updates
Very low noise Cost effective
Integrated identification and diagnostics SDI-12 device

Technical Description
The BaroVUE™10 is a low-power, digital barometer (-40 to and makes the BaroVUE™10 compatible with all Campbell
+60°C) that provides best-in-class accuracy and stability Scientific SDI-12 devices. Moreover, this barometric pressure
(±0.1 hPa/yr) over the entire pressure and temperature sensor can be installed and integrated into many new and
range. It can run continuously and does not require power existing weather stations. The transducers used in the
cycling unlike other products in this category. The digital BaroVUE™10 are direct-to-digital sensors, and no
output is both SDI-12 and RS-232, which reduces noise and reconversion takes place inside the barometer.
measurement uncertainty compared with analog sensors,

Specifications
-NOTE- These specifications assume the used.
recommended desiccation is Pressure Range 500 to 1100 hPa

For comprehensive details, visit: www.campbellsci.eu/barovue10


Temperature Range -40° to +60°C Weight 226.8 g (0.5 lb)
Supply Voltage 9 to 28 Vdc Accuracy
Elevation ~609.6 m (2,000 ft) below sea Calibration Uncertainty ±0.15 hPa
level (as in a mine) to 4,572 m
(15,000 ft) above sea level Uncertainty ±0.3 hPa (at 20°C)
Current Consumption 200 µΑ (sleep mode) Total Uncertainty ±0.5 hPa (at -40° to +60°C)
< 5 mA (active) Long-Term Stability ±0.1 hPa/yr
Digital Output SDI-12, RS-232 serial Power Supply Rejection Negligible
Pressure Fitting Barbed fitting for 0.318 cm Measurement Noise 0.05 hPa (RMS)
(0.125 in.)
Resolution 0.1 hPa
Dimensions 2.2 x 9.0 x 10.2 cm (0.87 x 3.54 x
4.02 in.)

For comprehensive details, visit: www.campbellsci.eu/barovue10

© 2021 Campbell Scientific, Ltd. | 06/28/2021

You might also like