XCT70_BR汽车起重机 / Truck Crane

技术规格书
Technical specifications

70t* 46.5m 62.5m

2022年01月 第1版
1st edition, Jan. 2022
 目录
Contents

目录
Contents
尺寸参数
3
Dimensions
技术规格
4-7
Technical specifications
重量/作业速度
8
Weight / Working speeds
平衡重
9
Counterweight
臂架组合方案
10-11
Boom / Jib combinations
主臂
12-15
Boom
副臂
16-17
Jib
符号标识
18
Description of symbols
主要技术参数表
19-20
Table of main technical parameters
注意事项
21
Notes

2 XCMG——XCT70_BR
尺寸参数
Dimensions

A B C H R1 R2 R3

385/95R25 12° 13° 3830 280 9800 11900 12300

XCMG——XCT70_BR 3
技术规格
Technical specifications
轮胎 8个轮胎，1个备胎，前后桥都装单胎
` 底盘 轮胎规格：385/95R25
车架 徐工设计、制造，全覆盖式走台板，防扭转箱 制动 行车制动：双回路气压制动，作用于所有车轮，
型结构，高强度钢材制造。 标配ABS防抱死系统
驻车制动：弹簧贮能制动，作用于2-4轴车轮。
支腿 4支腿；纵向H形布置，操作杆控制液压动作；
辅助制动：发动机排气制动。
可由底盘任一侧同时或单独控制各支腿的动作，
转向 机械式转向机构，带有液压助力，带后轴转向
设有水平仪；带第五支腿；且垂直支腿带有液
系统。
压双向锁
驾驶室 新型复合结构驾驶室，全封闭、装备豪华舒适。
支脚盘尺寸：450×450mm
性能上：优越的密封性和防腐蚀、防震设计；
最大起重量时支腿反力：585kN
配置大视野的前挡风安全玻璃、后视镜，电控
发动机 WP12.375N，直列六缸水冷电控柴油发动机， 洗涤器，电子门窗升降器，带有除霜风挡的室
潍柴，额定功率276kW/1900rpm，最大扭矩 内空气加热器，收放音机、丝网地垫等。副驾
1800Nm/1000-1400rpm，国三排放标准。 双座椅，可展开为简易卧铺。
燃油箱容积：350L。 2公斤灭火器；标配冷暖空调。
变速箱 陕齿机械式变速箱，带缓速器，10个前进档， 电气系统 直流24伏特，串联12伏特的电池组2个。
2个倒档，带同步器。 发电机 ，28伏特-80安培。
车桥 高强度车桥，1、2桥转向，3、4桥转向驱动。
悬挂 前悬架：纵置钢板弹簧式平衡悬架，筒式减震
器
后悬架：采用双纵臂平衡悬架，上推力杆采用
V型推力杆

XCMG——XCT70_BR 4
技术规格
Technical specifications

安全装置 液压平衡阀；液压溢流阀；液压双向锁；力
上车 矩限制器；三圈保护器；起升高度限位器；
风速仪；三色报警灯；回转警示灯。
结构 徐工设计、制造，高强度钢材制造。
组合配重 2.6t
总重10.5t，有2.6t、5.3t、
液压系统 液压泵：底盘发动机驱动四联泵，定量泵用于 2.7t
起升、变幅、伸缩。 7.8t、10.5t 四种组合方式。
5.2t
控制阀：先导液压油控制的负荷敏感式比例多
起重钩 55t钩
路换向阀，带有抗冲击阀、防气蚀阀。
油路：风冷式液压油冷却器，有效降低系统油 5t钩
温。
操纵方式 液控先导操纵系统，由左右2个操纵手柄控制，
由液压泵和比例阀进行液压先导式控制起重机
的全部动作。

主 起 升 机 液压控制调速，装有双折线绳槽卷筒，由液压
马达通过行星齿轮减速器驱动，内置常闭式制
构
动器并带有平衡阀；

副 起 升 机 液压控制调速，装有双折线绳槽卷筒，由液压
构 马达通过行星齿轮减速器驱动，内置常闭式制
动器并带有平衡阀； 臂架系统
回转机构 四点接触球式回转支承，由液压马达驱动行星
主臂
齿轮回转机构减速器驱动，可连续回转360°； 5节，“U”形截面的筒形焊接结构。双缸
具有动力控制或自由回转的功能，可无级调速； 绳排伸缩机构
回转杆设有鸣响开关。 主臂长度：12m～46.5m。
变幅机构 单支双作用前置液压变幅油缸，带有平衡阀。 臂端单滑轮 单滑轮, 安装在主臂顶端用于单股钢丝绳起

操纵室 新型钢制操纵室，装有无视野死角的前景窗， 重作业，起重性能与主臂相同，但最大起

安全玻璃，车窗装有遮阳板，座椅靠背可倾斜 重量不超过5t
定位，操纵杆安装在座椅两侧的扶手台上；带 固定副臂 2节桁架式焊接结构，具有0°、15°、30°三
推拉踏板；前窗顶窗装有雨刮器；标配冷暖空
种固定副臂安装角
调。
固定副臂长度：9.5m/16m

XCMG——XCT70_BR 5
 技术规格
Technical specifications
Tires 8 tires and 1 spare tire, all axles are equipped with
` Chassis single tire
Frame Tire specifications: 385/95R25
Designed and manufactured by XCMG, it is
made of high strength steel with fully covered Braking Service brake: double-circuit air pressure brake
walking surface and anti-torsion box-typed acting on all wheels. ABS system is standard.
structure. Parking brake: spring-loaded brake, acting on
Outriggers Four outriggers arranged in H-shape are wheels of axles 2 and 4;
hydraulically controlled by control levers. There Auxiliary brake: engine exhaust brake.
is an outrigger control station located at each Steering Mechanically steering mechanism with a
side of the chassis, and there is a level gauge on hydraulic booster; with rear axle steering system
each control station. The outrigger movements
Driver's New enclosed cab, luxury and comfort. It is
can be simultaneously or separately controlled designed to be leak-proof, anti-corrosive and
cab
on either side of the chassis. The 5th jack is shock-proof. It is equipped with a windshield
equipped. There is a double-way hydraulic valve offering outstanding visibility, rear-view mirrors,
fitted in each jack cylinder. electric-controlled washer, electric window lifters,
Outrigger float dimensions: 450×450 mm air heater with defrosting function, radio, floor
Reaction force of outrigger at max. lifting load: mat, etc.
585KN A double-seat designed for the co-driver can be
unfolded into a berth for rest.
Engine WP12.375N, in-line, 6-cylinder, water cooled, Air conditioner and fire extinguisher of 2 kg are
electric-controlled diesel engine, made by standard.
WEICHAI. Electric 24 V DC, two sets of 12 V battery in series. 28V-
Rated power: 276 kW/1900 rpm system
Max. torque: 1800 Nm/1000-1400 rpm 80A.
Compliant with China III emission standard.
Fuel tank capacity: 350 L
Transmission Mechanical transmission, made by Shaanxi Fast

Gear Co., Ltd., 10-forward speed and 2-reverse

speed, with retarder and synchronizer.
Axles High strength axles. 1st and 2nd axles are for
steering, and 3rd and 4th axles are for driving
and steering.
Suspensions Front suspension: longitudinal leaf spring
balanced suspension, with tube shock absorber.
Rear suspension: double trailing arm balanced
suspension, V-type upper thrust lever

XCMG——XCT70_BR 6
 技术规格
Technical specifications

Operator’s New steel cab with a full-view windshield,

Superstructure safety glass, sun shield and adjustable
Cab operator’s seat. Windshield wiper and roof
Frame Designed and manufactured by XCMG, made of window wiper are fitted. Crane control
high strength steel. levers are integrated into armrests. A pull-
out step is designed for easy and safe
Hydraulic Hydraulic pump: quadruple pump driven by access to the cab. Heater and air
system chassis engine, fixed-displacement pump used for conditioner are equipped as standard.
lifting, luffing and telescoping operations. Safety devices Hydraulic balance valve, hydraulic relief
Control valve: load-sensitive proportional multi- valve, double-way hydraulic valve, LMI,
way change valve controlled by pilot hydraulic oil, lowering limiter, anti-two block,
anemometer, tri colored light bar, slewing
which is integrated with impact-resistant valve
warning lamp.
and cavitation-proof valve.
Oil circuit: there is an air cooled hydraulic oil Combined 2.6 t
Total weight is 10.5 t.
cooler equipped to effectively reduces the oil counterweight Four combinations: 2.6 t, 5.3 t 2.7 t
temperature. 7.8 t and 10.5 t.
5.2 t
Control Pilot hydraulic control is used for controlling the
superstructure. All crane movements are Hook blocks 55 t hook block
system
controlled by the hydraulic pump and proportional 5 t hook block
valve through two control.
Main Hydraulic control is used for speed regulation.
winch The system is driven by a hydraulic motor through
system a planetary gear reducer, with a normally closed
brake, a balanced valve and a Lebus-type grooved
Boom and jib system
drum equipped.
Boom 5-section boom with U-shaped cross-section,
Auxiliary Hydraulic control is used for speed regulation.
welded structure. Double-cylinder plus ropes
winch The system is driven by a hydraulic motor through telescoping system.
system a planetary gear reducer, with a normally closed Boom length: 12 m～46.5 m.
brake, a balanced valve and a Lebus-type grooved Single top Fitted at boom head, used for single line lifting
drum equipped. operation.
Its lifting performance is the same as that of boom,
Slewing Four-point contact-ball slewing ring is driven by
but the maximum lifting load can not exceed 5 t.
the planetary gear reducer of slewing mechanism,
system Fixed jib
which is driven by a hydraulic motor, and may Two lattice jib sections, welded structure;
continuously slew 360°. Power control and free Three offset angles: 0°, 15° and 30°.
slewing function as well as stepless speed Fixed jib length: 9.5 m/16 m.
regulation are available. Horn switch is equipped
on the slewing control lever.
Luffing A front support double-acting hydraulic cylinder
system is equipped for luffing operation, with a balance
valve fitted.

XCMG——XCT70_BR 7
车型与选装件
Version and optional equipment

车型 选择
功能描述/Function description
Version Selection
标准型 五节主臂46.5m，固定副臂16m
Standard 5-section boom of 46.5 m , fixed jib of 16 m
注释：该产品仅标准型一种车型。
Note: only standard version is available for this model.

可选装件 选择
Optional equipment Selection
吊钩 35吨钩
Hook block 35 t hook block
倒车影像
Rear view camera
支腿压力检测
Outrigger pressure detecting device
数据记录仪
Data recorder
卷扬监视器
Winch monitoring device

XCMG——XCT70_BR 8
重量
Weight

车桥 总重量
1 2 3 4
Axle Total weight

t 10.5 10.5 11.8 11.8 44.6

t 11.9 11.9 14.35 14.35 52.5

1)上车不带活动平衡重，；
Superstructure: without counterweight slabs
2)短途转场状态，最高车速20km/h，带55t钩、副臂、副卷，臂端单滑轮，10.5t平衡重；
轮胎规格：385/95R25；
Short-distance jobsite transfer: max. travel speed is 20 km/h, with 55 t hook block, jib, auxiliary winch, single top，
counterweight of 10.5 t.
Tire specification: 385/95R25

吊钩尺寸
吊钩 倍率 吊钩重量 备注
Dimensions
Hook block Parts of line Weight (kg) Remarks
(mm)
55 t 12 550 504×562×1480 单钩 Single hook
35 t 8 360 430×504×1362 单钩 Single hook
5t 1 100 300×300×535 单钩 Single hook

XCMG——XCT70_BR 9
作业速度
Working speeds

385/95R25 2.5～90 45%

作业机构
作业速度 最大单绳拉力 钢丝绳直径/长度
Operating
Working speed Max. single line pull Rope diameter/ length
mechanism
1
m/min，单绳，第四层
0-130 51kN 18 mm/208 m
m/min, single line, 4th layer
m/min，单绳，第四层
2 0-130 51 kN 18 mm/140 m
m/min, single line, 4th layer

0-1.6 r/min

从-1°抬起至80°约45s
Approx. 45s for boom luffing from -1° to 80°
从12m伸出至46.5m约107s
Approx. 107s for boom extending from 12 m to 46.5 m

XCMG——XCT70_BR 10
平衡重
Counterweight

平衡重
A B C
Counterweight
尺寸（长×宽×高） m
2790×1587×210 2790×1587×195 2790×1587×348
Dimensions (L×W×H) m
重量 t
2.6 2.7 5.2
Weight t

工况模式
10.5 t 7.8t 5.3 t 2.6 t
Working mode
组合形式
A+B+C A+C A+B A
Combinations

XCMG——XCT70_BR 11
臂架组合方案
Boom / Jib combinations

主臂 副臂
Telescopic boom Jib

T：46.5m
T：12~46.5m
J：9.5/16 m

XCMG——XCT70_BR 12
起升高度曲线图 主臂
Boom
Lifting heights

55m

50

45

40

T 46.5m
35

T 42.2m
T 40m
30
T 37.9m

T 35.7m

T 33.6m
25
T 31.4m

T 29.3m

T 27.1m
T 24.9m
20

T 22.8m
T 20.6m
15
T 18.5m

T 16.3m

10
T 12m

0 5 10 15 20 25 30 35 40 45m

XCMG——XCT70_BR 13
起重性能表 T 12~46.5m
Lifting capacities
12-46.5m 6.4m×7.9m 10.5t

T
12m 16.3m 20.6m 27.1m 33.6m 40m 46.5m 18.5m 24.9m 31.4m 37.9m 22.8m 29.3m 35.7m 42.2m
3 70 3
3.5 55 44 3.5
4 48 43 30.2 4
4.5 45 41 34.6 30.2 26.9 29.5 4.5
5 43.2 39 32.5 29.5 30.2 25.8 29.5 24.5 5
6 37 33.5 29.3 27.3 29.6 24 16.8 29.5 24.2 6
30.5 30 26.9 24.6 22.1 28.7 22.3 15.6 12.5 27 23.9 16.7
7 7
8 26 25.5 25 22.6 20.4 16.1 26.9 20.8 14.6 11.8 25.1 22.3 15.8 8
9 22 22 21.6 21 18.9 15.1 10.6 24.1 19.4 13.7 11.2 23.6 20.9 14.9 11.4 9
10 19.3 18.8 18.4 17.3 14.2 10.5 21.1 18.3 12.8 10.5 20.5 19.3 14.1 11 10
12 13.6 13.4 14.4 15 12.5 10.1 15.3 15.9 11.5 9.4 14.8 15.4 12.6 10.1 12
14 9.8 10.8 11.4 11.2 9.1 11.7 12.3 10.3 8.4 11.2 11.8 11.2 9.2 14
16 7.4 8.3 8.9 9.3 8.2 9.7 9.3 7.7 8.7 9.3 9.6 8.3 16
18 6.6 7.1 7.5 7.7 7.9 8.2 7.1 6.9 7.5 7.8 7.8 18
20 5.2 5.7 6.1 6.4 6.5 6.8 6.5 5.5 6.1 6.4 6.7 20
22 4.2 4.7 5 5.3 5.7 5.9 5 5.4 5.6 22
24 3.8 4.2 4.4 4.9 5.1 4.2 4.5 4.7 24
26 3.2 3.5 3.7 4.2 4.4 3.5 3.8 4 26
28 2.6 2.9 3.1 3.8 3.2 3.4 28
30 2.4 2.6 3.3 2.7 2.9 30
32 2 2.2 2.8 2.3 2.5 32
34 1.6 1.9 2.1 34
36 1.5 1.8 36
38 1.2 38

XCMG——XCT70_BR 14
起重性能表 T 12~46.5m
Lifting capacities
12-46.5m 6.4m×7.9m 2.6 t

T
12m 16.3m 20.6m 27.1m 33.6m 40m 46.5m 18.5m 24.9m 31.4m 37.9m 22.8m 29.3m 35.7m 42.2m
3 70 3
3.5 55 44 3.5
4 48 43 30.2 4
4.5 45 41 34.6 30.2 26.9 29.5 4.5
5 43.2 39 32.5 29.5 30.2 25.8 29.5 24.5 5
6 37 33.5 29.3 27.3 29.6 24 16.8 29.5 24.2 6
27.9 27.4 26.9 24.6 22.1 28.7 22.3 15.6 12.5 27 23.9 16.7
7 7
8 20.8 20.4 20.1 21.3 20.4 16.1 22.4 20.8 14.6 11.8 21.8 22.3 15.8 8
9 16.3 15.9 15.6 16.8 17.4 15.1 10.6 17.7 18.4 13.7 11.2 17.2 17.8 14.9 11.4 9
10 12.6 12.3 13.4 14.1 14.2 10.5 14.4 15 12.8 10.5 13.8 14.5 14.1 11 10
12 8.4 8.1 9.1 9.7 10.1 10.1 10 10.6 10.9 9.4 9.5 10.1 10.5 10.1 12
14 5.6 6.6 7.1 7.5 7.7 7.4 7.9 8.2 8.4 6.9 7.5 7.8 8.1 14
16 3.9 4.8 5.4 5.7 6 6.1 6.4 6.6 5.2 5.7 6 6.2 16
18 3.6 4.1 4.4 4.7 4.8 5.1 5.3 3.9 4.4 4.7 5 18
20 2.7 3.2 3.5 3.7 3.9 4.1 4.3 3 3.5 3.8 4 20
22 1.9 2.4 2.7 3 3.4 3.6 2.7 3 3.2 22
24 1.8 2.1 2.4 2.8 2.9 2.1 2.4 2.6 24
26 1.4 1.7 1.9 2.3 2.5 1.6 1.9 2.1 26
28 1.3 1.5 2 1.5 1.7 28
30 1.1 1.7 1.4 30
倍率 倍率
12 10 8 6 5 4 3 7 6 4 3 7 5 4 3
n n

XCMG——XCT70_BR 15
起升高度曲线图 副臂
Jib
Lifting heights

0° 65m

60
15°

30°
0° 55

15°
50

30°
45

40

35

30

25

20

15

10

0
0 5 10 15 20 25 30 35 40m

XCMG——XCT70_BR 16
起重性能表 T 46.5m
Lifting capacities

46.5m 9.5m/16m 6.4m×7.9m 10.5t

T
9.5m 16m
0° 15° 30° 0° 15° 30°
80 5000 3500 3000 3000 2500 1800 80
78 5000 3500 3000 3000 2400 1700 78
75 4800 3400 2800 2900 2200 1500 75
72 4500 3200 2600 2800 2000 1400 72
70 4200 3000 2500 2600 1800 1300 70
65 3600 2800 2300 2500 1600 1200 65
60 2700 2500 2100 2100 1500 1200 60
55 1900 1800 1700 1400 1300 1100 55
50 1300 1200 1200 900 800 800 50

46.5m 9.5m/16m 6.4m×7.9m 2.6 t

T
9.5m 16m
0° 15° 30° 0° 15° 30°
80 5000 3500 3000 3000 2500 1800 80
78 5000 3500 3000 3000 2400 1700 78
75 4800 3400 2800 2900 2200 1500 75
72 4100 3200 2600 2800 2000 1400 72
70 3400 3000 2500 2600 1800 1300 70
65 2100 1900 1800 1600 1400 1200 65

XCMG——XCT70_BR 17
符号标识
Description of symbols

常规标识
General symbols

上车 底盘
Superstructure Chassis

起重能力 车桥
Lifting capacity Axle

吊臂长度 行驶速度
Boom length Travel speed

工作幅度 爬坡能力
Working radius Grade ability

吊臂仰角 轮胎
Boom angle Tires

主臂起升高度 支腿
Lifting height with boom Outriggers

固定副臂长度 吊钩
Fixed jib length Hook block

副臂安装角 平衡重
Jib offset angle Counterweight

副臂起升高度 卷扬
Lifting height with jib Winch

不使用第五支腿侧后方作业
360°全回转
Boom over side or over rear of the
360° rotation
crane without 5th jack
使用第五支腿360°全回转
带载行驶
360° operation of the boom with 5th
Travel with load jack down

XCMG——XCT70_BR 18
 主要技术参数
Table of main technical parameters

类别 项目 单位 参数
Category Item Unit Parameter
外形尺寸（长×宽×高）
mm 14750×2800×3830
Dimensions (length×width×height)
轴距
mm 1500+4665+1500
Wheel base
尺寸参数 轮距（前/后）
mm 2400/2336
Dimensions Track（Front/ Rear ）
前悬/后悬 2466/2450
mm
Front/ Rear overhang 2479/2450
前伸/后伸 2169/0
mm
Front/ Rear extension 2156/0
最大允许总质量
kg 44600
Total vehicle mass in travel configuration
重量参数 一轴 1st axle kg 10500
Weight 轴荷 二轴 2nd axle kg 10500
Axle load 三轴 3rd axle kg 11800
四轴 4th axle kg 11800
发动机型号 Engine model —— WP12.375N
额定功率/转速
kW/(r/min) 276/1900
Engine rated power/rpm
动力参数
Power 最大净功率/转速
kW/(r/min) 274/1900
Max. net power/rpm
最大输出扭矩/转速
N.m/(r/min) 1800/1000-1400
Max. output torque/rpm
最高车速
km/h 80
Max. travel speed
最低稳定车速
km/h 2.5~3
Min. stable travel speed
最小转弯直径
m 20
Min. turning diameter
臂头最小转弯直径
m ≤27
Min. turning diameter at boom tip
最小离地间隙
mm 280
行驶参数 Min. ground clearance
Travel 接近角
° 12
Approach angle
离去角
° 13
Departure angle
制动距离（制动初速度为30km/h）
m 10
Braking distance (at 30 km/h )
最大爬坡能力
% 48
Max. grade ability
百公里油耗
L 45
Fuel consumption per 100 km
加速行驶机外噪声
dB(A) ≤88
噪音 Exterior noise level when accelerating
Noise 驾驶员耳旁噪声
dB(A) ≤90
Noise level at seated position

19 XCMG——XCT70_BR
主要技术参数
Table of main technical parameters

类别 项目 单位 参数
Category Item Unit Parameter
最大额定总起重量 Max. total rated lifting capacity t 70

最小额定工作幅度 Min. rated working radius m 3

转台尾部回转半经（平衡重处）
mm 4110
Turning radius at turntable tail (counterweight)
基本臂
kN.m 2176
Base boom
最大起重力矩 最长主臂
kN.m 1358
Max. load moment Fully-extended boom
最长主臂+副臂
kN.m 875
Fully-extended boom + Jib

支腿跨距 纵向 Longitudinal m 6.4

主要性能参数 Outrigger span 横向 Lateral m 7.9
Main
performance 基本臂
m 12.7
Base boom
起升高度 最长主臂
m 47
Lifting height Fully-extended boom
最长主臂+副臂
m 62.5
Fully-extended boom + Jib
基本臂
m 12
Base boom
起重臂长度 最长主臂
m 46.5
Boom length Fully-extended boom
最长主臂+副臂
m 62.5
Fully-extended boom + Jib
副臂安装角 Jib offset angle ° 0、15、30

起重臂起臂时间 Time for raising the boom s ≤45

起重臂全伸时间 Time for fully extending the boom s ≤107

最大回转速度 Max. slewing speed r/min ≥1.6

水平支腿 收 Retracting s ≤25

工作速度参数 支腿收放时间 Outrigger beam 放 Extending s ≤30

Working speed Time for extending and
retracting outriggers 垂直支腿 收 Retracting s ≤50
Outrigger jack 放 Extending s ≤50
起升速度（单绳，
主起升机构 Main winch m/min ≥130
第四层，空载）
Hoisting speed (single line, 4th
layer, no load) 副起升机构 Auxiliary winch m/min ≥130

噪声 机外辐射 Exterior noise level dB（A） ≤109

Noise 司机位置处 Noise level at seated position dB（A） ≤85

XCMG——XCT70_BR 20
注意事项
Notes

1. 表中额定总起重量值，是在平整的坚固地面上本起重 1. The total rated load given in the rated load charts are the
maximum lifting capacity when the crane is set up on
机能够保证的最大总起重量，包括吊钩和吊具的重量，
firm and level ground. The total rated load includes the
所以为了估算重物重量，必须减去上述的装置重量。 weight of the hook block and slings. The weight of
above-mentioned devices should be deducted from the
rated lifting load.
2. 表中的工作幅度为起吊重物离地时起重物到起重机回
2. The working radius shown in the rated load charts is the
转轴线的水平距离，是包括起重臂变形量在内的实际
radius when the load is lifted off the ground, and it is the
值，因而起吊前应考虑起重臂变形量。 actual value including loaded boom deflection. Take
boom deflection into consideration before beginning a
lifting operation.
3. 只允许在5级(瞬时风速14.1m/s，风压125N/m2)风
以下进行作业。 3. A lifting operation is permissible only when the wind
force is below grade 5 (instantaneous wind speed is 14.1
m/s, wind pressure is 125 N/m2).
4. 吊重前操作者必须对物体的重量和工作范围了解后选
4. Before beginning lifting operation, the operator should
择合适的作业工况，严禁超出表中的数值。幅度及臂 know the weight of the load to be lifted and its working
长在相邻两个数值之间时，应依据两个数值中较小值 range, and then select proper working conditions. Never
operate the crane beyond the limit shown in the chart.
确定起重作业。 Use the lower value from the chart when the boom length
or working radius is between the range of values.
5. 应按主臂仰角范围作业，即使是空载，也不应使主臂 5. Do not extend the boom into areas of the load chart
仰角处于范围外，谨防整机倾翻。 where the crane does not have capacity beyond the angles
shown in the range diagrams, or tipping may occur.

6. 表中的主臂长度应要按照每节臂的伸缩要求进行伸出。 6. The boom should be extended according to the

telescoping code shown by digits, which means the
percentage of boom sections extended.

XCMG——XCT70_BR 21