COMMERCIAL & TECHNICAL QUOTATION

CLIENT: -

SELEER: YANGZHOU KERUNDE MACHINERY CO., LTD.

PROJECT: 10TPH POULTRY FEED LINE

NO.: KRD241213SL09A

DATE: 13 DEC. 2024

VALID TIME: TWO MONTHS

No.198 Ji'An Road, HanJiang Industrial Park ,Yangzhou city, Jiangsu ,China P. Box 225127
Tel.:+86 514 80820111, Fax.:+86 514 87770730, www.kerunde.com
Mr. Peny, Mob.:+86 158 6138 5919, Emial: [email protected]
 SUMMARY SHEET
NO DESCRIPTION CURRENCY PRICE

PART 1. TOTAL AMOUNT FOR MACHINE USD 476,621

PART 2. TOTAL AMOUNT FOR PROJECT MATERIAL USD 45,747

PART 3. TOTAL AMOUNT FOR ELECTRICAL CONTROL SYSTEM USD 120,220

TOTAL EX-WORKS PRICE USD 642,588

PART 5. TOTAL AMOUNT FOR SUPERVISION INSTALLATION USD 45,000

PART 6. TOTAL AMOUNT FOR PACKING & INLAND FREIGHT USD 17,600

TOTAL AMOUNT FOR FOB SHANGHAI PORT USD 705,188

Note
1 This is full computer control for whole line ,including control for liquid adding,batching
and bagging system.

2 Refer to the flow chart, finish storage, raw material storage are not included.

3 The quotation does not include any civil works.

4 The seller reserve the right of machine model and specification modification
according to finial design after confirm with buyer.

General Page(2/27)
 PART 1.Machine List
POWER EXWORK PRICE (USD)
NO. DESCRIPTION Q'TY
KW UNIT TOTAL
R101-110 Raw Material Handling System
R101 Intake hopper & grids 2 1279 2558
R102 Dust Collector 2 3441 6882
R103 Centrifugal Fan 2 6.00 511 1022
R104 Chain Conveyor 2 6.00 3419 6838
R105 Bucket Elevator 2 6.00 9900 19800
R106 Precleaner 2 1.10 2095 4190
R107 Dust Collector 2 2.20 2779 5558
R108 Magnet Sleeve 2 1500 3000
R109 Pneumatic Two Way valve 1 507 507
R110 Rotary Distributor 1 0.55 2647 2647
SUB-TOTAL AMOUNT KW 21.85 USD 53002

G201-G216 Grinding System

G201 Pre-Grinding Bin 2 3308 6616
G202 High Level Indicator 2 441 882
G203 Low Level Indicator 4 441 1764
G204 Pneumatic Gate 2 617 1234
G205 Surge Hopper 1 330 330
G206 Impeller Feeder 1 1.50 3220 3220
G207 Hammermill 1 110.00 30000 30000
G208 Dust Collector 1 5029 5029
G209 Dust Collector Fan 1 15.00 2359 2359
G210 Silencer 1 1764 1764
G211 Sediment Hopper 1 992 992
G212 Screw Conveyor 1 3.00 2922 2922
G213 Bucket Elevator 1 4.00 10142 10142
G214 Rotary Distributor 1 0.55 2647 2647
SUB-TOTAL AMOUNT KW 134.05 USD 69901

B301-B331 Batching&Mixing System

B301 Batching Bin 10 2647 26470
B302 High Level Indicator 10 441 4410
B303 Low Level Indicator 10 441 4410
B304 Screw Conveyor 6 18.00 1764 10584
B305 Screw Conveyor 4 12.00 1533 6132
B306 Pneumatic Hammer 4 551 2204
B307 Micro ingredient adding system 1 0.75 2995 2995
B308 Batching Scale Hopper 1 2382 2382
B309 Pneumatic Gate 1 1720 1720
B310 Pneumatic Butterfly Valve 1 617 617
B319 Double Shaft Paddle Mixer 1 22.00 23382 23382
B320 Sediment Hopper 1 661 661
B321 Low Level Indicator 1 441 441
B322 Chain Conveyor 1 3.00 3893 3893
B323 Bucket Elevator 1 4.00 10230 10230
B324 Magnet Sleeve 1 1500 1500
B325 Pneumatic Two Way valve 1 507 507
SUB-TOTAL AMOUNT KW 59.75 USD 102538

P401-P440 Pelleting System

P401 Pre-Pelleting Bin 1 3308 3308
P402 High Level Indicator 1 441 441
P403 Low Level Indicator 1 441 441

Machine List Page(3/27)

 P404 Pneumatic Gate 1 617 617
P405 Surge Hopper 1 330 330
P406 Screw Feeder of Pellet Mill 1 1.50 3794 3794
P407 Conditioner for Pellet Mill 2 15.00 9882 19764
P407.1 Hygiene Conditioner 1 7.50 37058 37058
P408 Pellet Mill 1 150.00 71911 71911
P409 Site Control Pannel 1 1941 1941
P410 Feeding Airlock 1 0.75 3044 3044
P411 Counter flow Cooler 1 3.70 21617 21617
P412 Cyclone Discharger 1 2602 2602
P413 Centrifugal Fan 1 15.00 2426 2426
P414 Air Lock 1 1.10 904 904
P415 Crumbler 1 11.00 13632 13632
P416 Bucket Elevator 1 4.00 10230 10230
P417 ROTA-SHAKER GRADER 1 3.00 12220 12220
P418 Pneumatic Two Way valve 1 507 507
SUB-TOTAL AMOUNT KW 212.55 USD 206787

FP501-FP510 Packing System

FP501 Pre-Packing Bin 2 3308 6616
FP502 High Level Indicator 2 441 882
FP503 Low Level Indicator 2 441 882
FP504 Pneumatic Gate 2 617 1234
FP506 Surge Hopper 1 330 330
FP507 Pellet Feed Bagging Machine 1 1.20 12794 12794
FP508 Sewing Machine and Belt Conveyor 1 1.50 3705 3705
FP509 Dust Collector With Air Lock 1 3.30 4517 4517
FP510 Centrifugal Fan 1 4.00 639 639
SUB-TOTAL AMOUNT KW 10.00 USD 31599

A001-A006 Auxiliary System

A001 Liquid Adding Machine 1 6.60 12794 12794
A002 Steam Piping & Valving System For Pelletizer 1 BY BUYER
A003 Complete Air Compressor 1 BY BUYER
A004 Boiler and accessories 1 BY BUYER
A005 Hoist 1 BY BUYER
SUB-TOTAL AMOUNT Kw 6.60 USD 12794

TOTAL AMOUNT FOR MACHINERY KW 444.80 USD 476621

Machine List Page(4/27)

 Machine List Details
POWER EXWORK PRICE (USD)
NO. DESCRIPTION Q'TY
KW UNIT TOTAL
R101-R124 Raw Material Handling System
R101 Intake hopper & grids 2 1279 2558
Model: LD-TGSS16
Consisting of:
1) Tipping Grids;
2) Vent for Dust Collector Installation;
3) Pressure Relief Hopper
4) Flange Connection with Drag Conveyor;
Technical parameters:
1) Inlet Dimension(mm): 1460x2000
2) Outlet Dimension(mm): 1600x200
3) Depth(mm): 1000
4) Plate thickness(mm): 4

R102 Dust Collector 2 3441 6882

Model: LNGM18
Consist of:
1) Air jet device
2) Interface of filtering sleeve device
3) Hinge of compacted figured pattern plate
4) Figured pattern plate
5) Filtering sleeve
6) Top cover of box
7) Impulse control instrument
8) Treating device of air source
9) Inlet of air pocket
10) Air pocket
11) Solenoid valve
Technical parameters ：
1) Air volume(m3/h ): 2160-4320
2) Filtering area(m2): 18
3) Number of sleeve: 24
4) Dusting Efficiency : ≥99.5%
5) Size of filtering bag(mm): Φ140×2000
6) Filtering bag material: terylene needle felt
7) Number of solenvod valves: 6

R103 Centrifugal Fan 2 6.00 511 1,022.00

Model:4-72-3.6A
Technical parameters
• Surface treatment Painted
• Main material Carbon steel
• Air Volume(m3/h): 2930-5408
• Air Pressure(Pa): 1090-1650
Technical parameters
1) Power(Kw): 3.00

R104 Chain Conveyor 2 6.00 3419 6838

Model: TGSS16
Consist of:
1) The part of head and tail
2) Middle and transition section
3) Inlet and anti-blocked gate
4) Conveying chain with UHMW scraper

Machine Details Page(5/27)

 5) Driving device
Technical parameters
1) Anti-corrosion surface treatment: Painted
2) Casing cover thickness(mm): 3.0
3) Casing sidewall thickness(mm): 4.0
4) Casing Bottom thickness(mm): 4.0
5) Width of trough(mm): 160
6) Chain pitch(mm): 68
7) Scraper interval(mm): 400
8) Speed of drag scraper(m/s): 0.48
9) Length(m): 10.0
10) Capacity(Max,m3/h): 55
Base on ≤0.75 t/m3 material
11) Power(kw): 3.0

R105 Bucket Elevator 2 6.00 9900 19800

Model :TDTG36/23
Consist of:
1) Elevator Head Part with Dust Explosion Pressure Relief Vent
2) Middle Spouts with inspection hatch
3) Elevator Foot Parts with Belt Tension Adjustment Structure
4) PVC Belt
5) Plastic bucket
6) Drive system
Technical parameters:
1) Anti-corrosion surface treatment Painted
2) Belt pulleys(mm) Φ360
3) Spouting thickness(mm) 2
4) Head and feet thickness(mm) 4
5) Linear speed(m/s) 1.8
6) Bucket volume(L) 3.5
7) Height(m): 30
3
8) Capacity(Max,m /h): 60
Base on ≤0.75 t/m3 material
11) Power(kw): 3

R106 Precleaner 2 1.10 2095 4190

Model: TCQY63A
Features:
Rotary drum type sieve machine for cleaning
grain from big impurities like paper, straw, etc.
Consist of:
1) Precleaner body
2) Precleaner drum sleave
3) Motor and driving system
4) Material inlet and outlet system
Technical parameters:
1) Spindle speed(r/min): 20
2) Sleeve size(mm): Φ630×800
3) Power(kw): 0.55

R107 Dust Collector 2 2.20 2779 5558

Model: TBLMb4A
Consist of:
1) Air jet device
2) Interface of filtering sleeve device
3) Hinge of compacted figured pattern plate
4) Figured pattern plate
5) Filtering sleeve

Machine Details Page(6/27)

 6) Top cover of box
7) Treating device of air source
8) Inlet of air pocket
9) Air pocket
10) Solenoid valve
11) Fan
Technical parameters ：
1) Air volume( m3/h): 720-1440
2) Filtering area(m2): 4
3) Number of sleeve: 4
4) Dusting Efficiency : ≥99.5% ;
5) Size of filtering bag(mm): Φ380×1000
6) Power of fan (kw): 1.1

R108 Magnet Sleeve 2 1500 3000

Model: TCXT20
Consist of:
1) Made of stainless steel shell
2) Permanent magnet core
Technical parameters:
1) Inner diameter(mm): 200
2) Iron removal efficiency: ≥99%
3) Magnet-field intensity: ≥0.2T

R109 Pneumatic Two Way valve 1 507 507

Model: TBDQy20x20/30°
Consist of:
1) Housing
2) Pneumatic cylinder
3) Sealing plate
4) Rotating shaft
5) Tipping plates
6) Cylinder connector
7) Rotating arm
8) Bearings with pedestal
Technical parameters:
1) Feeding area(m2) 0.04
2) Working pressure（bar） 0.6-12

R110 Rotary Distributor 1 0.55 2647 2647

Model: TFPX6-200
Consist of:
1)6-way steel box constructure
2) Limit switch for position signalling
3) Driving system
Technical parameters:
1) Anti-corrosion surface treatment: Painted
2) Number of outlet: 6
3) Outlet spout diameter(mm): 200
4) Rotating speed(r/min): 5
5) Power(kw): 0.55

G201-G216 Grinding System

G201 Pre-Grinding Bin 2 3308 6616
Bulk Volume: 30m3 with 2x15m3
Storage 22.5 tons, 0.75 t/m3
Assembling on job site by bolts and nuts
Consist of
1) Square storage bin

Machine Details Page(7/27)

 2) Discharging conic hopper
3) Support frame
4) Manhole and air relief bag
Technical parameters
1) Main material Carbon steel
2) Surface treatment Painted
3) Body thickness(mm): 3.0
4) Hopper thickness(mm): 4.0

G202 High Level Indicator 2 441 882

Rotary Paddle Type

G203 Low Level Indicator 4 441 1764

Rotary Paddle Type

G204 Pneumatic Gate 2 617 1234

Model: TZMQ30×40
Consist of:
1)1 housing
2)1 cylinder
3)1 sealing plate
4)1 lashboard
5)1 end plate
6)1 rolling wheel
7)1 rolling-wheel shaft
8)1 cover plate
Technical parameters
1) Feeding area(m2) 0.12
2) Working pressure（bar） 0.6-12
3) Theoretical thrust（N） 1178
4) Theoretical tension（N） 990
5) Passage(mm): 300×400

G205 Surge Hopper 1 330 330

Bulk Volume: 1 m3
Consist of
1) Hopper
2) Inspection door and sight glass
3) Inlet and air relief hat
Technical parameters
1) Main material Carbon steel
2) Surface treatment Painted
3) Thickness(mm) 3.0

G206 Impeller Feeder 1 1.50 3220 3220

Model:TWLY25×30
Features
1) The feeding speed can be adjusted
2) Include the plat magnet and automatic self-cleaning device;
3) The frequency of the motor is changeable so as to control the feeding quan
Consist of
1) Feeding impeller
2) Casing
3) Magnet plate
4) Transition flange
5) Danfos frequency converter
Technical parameters
1) Anti-corrosion surface treatment Painted

Machine Details Page(8/27)

 2) Diameter of feeding impeller(mm) 200
3) Width of Feeding chamber(mm) 800
4) Power(kw) 1.5

G207 Hammermill 1 110.00 30000 30000

Model: SFSP132x36
Features
1) High capacity
Patented axial air inlet and U-shaped step grinding structure and
tuning technology for destroying circulating material layer;widened
grinding surface(1.5 times of normal),capacity 25% higher.
2) Stable performance
Optimal hammer arrangment and dynamically balanced high-precision rotor
wear-proof hammers,reversible rotation,long service life.
3) Friendly operation
Patented one-step screen hold-down device and fully-open
sliding door,ease of labor and maintenance;adjustable screen- hammer gap
CE standard design for human&machine safety.
Consist of
1) Hammer mill base
2) Dynamic balance tested rotor
3) Two pieces screen, tungsten carbide strengthened hammers
4) Screen pressing and fastening devices
5) Sliding access door
6) SKF bearings
7) Drive device
Technical parameters
1) Anti-corrosion surface treatment Painted
2) Diameter of grinding rotor(mm): 1320
3) Rotating speed(rpm): 2970
4) Hammer tip linear Speed(m/s): 102
5) Hammers Number( pcs): 64
6) Pin shaft(pcs): 4
7) Screen Hole Size( mm): Ø3.0
8) Capacity(Max, t/h): 15
Based on corn grinding, 0.75 t/m 3 ,moisture ≤ 13%, Ø3.0 mm
9) Power( kw): 110

G208 Dust Collector 1 5029 5029

Model: LNGM36
Consist of:
1) Air jet device
2) Interface of filtering sleeve device
3) Hinge of compacted figured pattern plate
4) Figured pattern plate
5) Filtering sleeve
6) Top cover of box
7) Impulse control instrument
8) Treating device of air source
9) Inlet of air pocket
10) Air pocket
11) Solenoid valve
Technical parameters ：
1) Air volume(m3/h ): 4320-8640
2) Filtering area(m2): 36
3) Number of sleeve: 48
4) Dusting Efficiency : ≥99.5%
5) Size of filtering bag(mm): Φ140×2000
6) Filtering bag material: terylene needle felt

Machine Details Page(9/27)

 7) Number of solenvod valves: 6

G209 Dust Collector Fan 1 15.00 2359 2359

Model:6-23-7C
Technical parameters ：
1) Power(kw): 15
2) Air Pressure(mmH2O): 603
3) Air Volume(m3/h): 6030

G210 Silencer 1 1764 1764

Model:φ400

G211 Sediment Hopper 1 992 992

Volume: 3 m3
Assembling on site by bolts and nuts
Consist of
1) Inspection window
2) Maintenance door
3) Security grid for dust collector
4) Cover and reinforcement

G212 Screw Conveyor 1 3.00 2922 2922

Model: TLSSF20
Consist of:
1) Driving system
2) Rotor and screw
3) Conveyor head and body
4) Material inlet and outlet door
Technical parameters ：
1) Length(m): 6
2) Diameter of vane(mm): 200
3) Power(kw) 3

G213 Bucket Elevator 1 4.00 10142 10142

Model :TDTG36/28
Consist of:
1) Elevator Head Part with Dust Explosion Pressure Relief Vent
2) Middle Spouts with inspection hatch
3) Elevator Foot Parts with Belt Tension Adjustment Structure
4) PVC Belt
5) Plastic bucket
6) Drive system
Technical parameters:
1) Anti-corrosion surface treatment Painted
2) Belt pulleys(mm) Φ360
3) Spouting thickness(mm) 2
4) Head and feet thickness(mm) 4
5) Linear speed(m/s) 1.8
6) Bucket volume(L) 3.5
7) Height(m): 30
3
8) Capacity(Max,m /h): 60
Base on ≤0.75 t/m3 material
11) Power(kw): 4

G214 Rotary Distributor 1 0.55 2647 2647

Model: TFPX6-200
Consist of:
1)6-way steel box constructure

Machine Details Page(10/27)

 2) Limit switch for position signalling
3) Driving system
Technical parameters:
1) Anti-corrosion surface treatment: Painted
2) Number of outlet: 6
3) Outlet spout diameter(mm): 200
4) Rotating speed(r/min): 5
5) Power(kw): 0.55

B301-B331 Batching&Mixing System

B301 Batching Bin 10 2647 26470
Bulk Volume: 120m3 with 10x12m3
Storage 90 tons, 0.75 t/m3
Assembling on job site by bolts and nuts
Consist of
1) Square storage bin
2) Discharging conic hopper
3) Support frame
4) Manhole and air relief bag
Technical parameters
1) Main material Carbon steel
2) Surface treatment Painted
3) Body thickness(mm): 3.0
4) Hopper thickness(mm): 4.0

B302 High Level Indicator 10 441 4410

Rotary Paddle Type

B303 Low Level Indicator 10 441 4410

Rotary Paddle Type

B304 Screw Conveyor 6 18.00 1764 10584

Model: TWLL20
Consist of
1) Head and Tail
2) U Bottom Trough
3) Main shaft with varying pitch screw
4) Roof cover with inspection door
5) Drive system
Technical parameters
1) Anti-corrosion surface treatment Painted
2) Main material Carbon steel
3) Diameter of vane( mm): 200
4) Rotate speed(r/min): 83
5) Conveyor body thickness( mm): 3
6) Length (m): 3
7) Capacity(Max,m3/h): 20
Based on material density, 0.6t/m 3
8) Power(kw): 3

B305 Screw Conveyor 4 12.00 1533 6132

Model: TWLL16
Consist of
1) Head and Tail
2) U Bottom Trough
3) Main shaft with varying pitch screw
4) Roof cover with inspection door
5) Drive system
Technical parameters

Machine Details Page(11/27)

 1) Anti-corrosion surface treatment Painted
2) Main material Carbon steel
3) Diameter of vane( mm): 160
4) Rotate speed(r/min): 83
5) Conveyor body thickness( mm): 3
6) Length (m): 3
7) Capacity(Max,m3/h): 10
Based on material density, 0.6t/m 3
8) Power(kw): 3

B306 Pneumatic Hammer 4 551 2204

Model: AH-60
Using compressed air to vibrate down the material in hopper

B307 Micro ingredient adding system 1 0.75 2995 2995

Consist of:
1) Slide in Steel frame structure
2) Limit switch for position signalling
3) 3mm thick plates made manual dumping hopper and grids
4) Dust filter: TBLMb4
5) Pneumatic slide gate:TZMQ30X40
6) Electric Weigher By buyer

B308 Batching Scale Hopper 1 2382 2382

Model: PLDY1000
Consist of
1) Weighing Hopper and Support Structure
2) Flexible connection to hopper
3) Balance tube
4) Scale Gate SCMQ60×60
Technical parameters
1) Anti-corrosion surface treatment Painted
2) Main material Carbon steel
3) Capacity(kg/batch) 1000

B309 Pneumatic Gate 1 1720 1720

Model: SCMQ60×60
Consist of:
1)1 housing
2)1 cylinder
3)1 sealing plate
4)1 lashboard
5)1 end plate
6)1 rolling wheel
7)1 rolling-wheel shaft
8)1 cover plate
Technical parameters
1) Feeding area(m2) 0.36
2) Working pressure（bar） 0.6-12
3) Theoretical thrust（N） 1178
4) Theoretical tension（N） 990
5) Passage(mm): 600×600

B310 Pneumatic Butterfly Valve 1 617 617

Model:DN500
Open/Close indicators

B319 Double Shaft Paddle Mixer 1 22.00 23382 23382

Machine Details Page(12/27)

 Model:SLHS2
Features
1) Panted rotor, low mixing period and high efficiency
Double shaft with two layers specially distributed branches
Each branch has one big paddle in the end and one small paddle in the m
2) Lower mixing period, high CV, less residual
Mixing time from 45s to 60s
CV range 5%, min.CV 2.3%
Full open discharging door, less residual
Packing sealing combined axial sealing, avoid leakage
3) Easily and fast maintain, low labor cost
Large inspection door
Structured design
Consist of
1) Mixer Body with one inspection door
2) Double shaft with paddles
3) Discharging door and air component
4) Air balance tube and relief hat
5) Drive system
6) Air jet cleaning components
7) Liquid adding device
Technical parameters
1) Shell material Carbon steel
2) Volume(m3) 2.0
3) Capacity( kg/batch) 1000
4) Mixing time(S) 45-60
5) Coefficient of Variation (CV) 2%-3%
6) Liquid adding rate 3%

B320 Sediment Hopper 1 661 661

Bulk volume: 2 m3
Consist of
1) Reinforcement and cover
2) Inspection window and door
3) Mixer support frame
4) Assembling on job site by bolts and nuts

B321 Low Level Indicator 1 441 441

Rotary Paddle Type

B322 Chain Conveyor 1 3.00 3893 3893

Model: TGSS20
Consist of:
1) The part of head and tail
2) Middle and transition section
3) Inlet and anti-blocked gate
4) Conveying chain with UHMW scraper
5) Driving device
Technical parameters
1) Anti-corrosion surface treatment: Painted
2) Casing cover thickness(mm): 3.0
3) Casing sidewall thickness(mm): 4.0
4) Casing Bottom thickness(mm): 4.0
5) Width of trough(mm): 200
6) Chain pitch(mm): 68
7) Scraper interval(mm): 400
8) Speed of drag scraper(m/s): 0.48
9) Length(m): 9.0
10) Capacity(Max,m3/h): 55

Machine Details Page(13/27)

 Base on ≤0.75 t/m3 material
11) Power(kw): 3.0

B323 Bucket Elevator 1 4.00 10230 10230

Model :TDTG40/28
Consist of:
1) Elevator Head Part with Dust Explosion Pressure Relief Vent
2) Middle Spouts with inspection hatch
3) Elevator Foot Parts with Belt Tension Adjustment Structure
4) PVC Belt
5) Plastic bucket
6) Drive system
Technical parameters:
1) Anti-corrosion surface treatment Painted
2) Belt pulleys(mm) Φ400
3) Spouting thickness(mm) 2
4) Head and feet thickness(mm) 4
5) Linear speed(m/s) 1.8
6) Bucket volume(L) 3.5
7) Height(m): 35
3
8) Capacity(Max,m /h): 60
Base on ≤0.75 t/m3 material
11) Power(kw): 4

B324 Magnet Sleeve 1 1500 1500

Model: TCXT20
Consist of:
1) Made of stainless steel shell
2) Permanent magnet core
Technical parameters:
1) Inner diameter(mm): 200
2) Iron removal efficiency: ≥99%
3) Magnet-field intensity: ≥0.2T

B325 Pneumatic Two Way valve 1 507 507

Model: TBDQy20x20/30°
Consist of:
1) Housing
2) Pneumatic cylinder
3) Sealing plate
4) Rotating shaft
5) Tipping plates
6) Cylinder connector
7) Rotating arm
8) Bearings with pedestal
Technical parameters:
1) Feeding area(m2) 0.04
2) Working pressure（bar） 0.6-12

P401-P421 Pelleting System

P401 Pre-Pelleting Bin 1 3308 3308
Bulk Volume: 15m3 with 1x15m3
Storage 12 tons, 0.75 t/m3
Assembling on job site by bolts and nuts
Consist of
1) Square storage bin
2) Discharging conic hopper
3) Support frame

Machine Details Page(14/27)

 4) Manhole and air relief bag
Technical parameters
1) Main material Carbon steel
2) Surface treatment Painted
3) Body thickness(mm): 3.0
4) Hopper thickness(mm): 4.0

P402 High Level Indicator 1 441 441

Rotary Paddle Type

P403 Low Level Indicator 1 441 441

Rotary Paddle Type

P404 Pneumatic Gate 1 617 617

Model: TZMQ30×40
Consist of:
1)1 housing
2)1 cylinder
3)1 sealing plate
4)1 lashboard
5)1 end plate
6)1 rolling wheel
7)1 rolling-wheel shaft
8)1 cover plate
Technical parameters
1) Feeding area(m2) 0.12
2) Working pressure（bar） 0.6-12
3) Theoretical thrust（N） 1178
4) Theoretical tension（N） 990
5) Passage(mm): 300×400

P405 Surge Hopper 1 330 330

Bulk Volume: 1 m3
Consist of
1) Hopper
2) Inspection door and sight glass
3) Inlet and air relief hat
Technical parameters
1) Main material Carbon steel
2) Surface treatment Painted
3) Thickness(mm) 3.0

P406 Screw Feeder of Pellet Mill 1 1.5 3794 3794

Model: KDWL550B
Consist of
1) Chain driving system
2) Screw shaft and flight
3) Body of screw feeder
4) Danfoss Frequency inverter
5) Inspection window for feeder
Technical parameters
1) Material(Contact parts ) Stainless steel
2) Length(mm): 1092
3) Power(kw): 1.5

P407 Conditioner for Pellet Mill 2 15 9882 19764

Model:KDTZ550
Features

Machine Details Page(15/27)

 1) Mainly applicate for preprocessing product before pelletizing process
2) Ensure sufficient moisture is absorbed by the product
3) Improve product forming performance and quality
Consist of
1) 2 layers Conditioner shell with inspection doors
2) Shaft(s) with paddles
3) Steam adding inlets
4) Driving system
5) Temperature sensor(s)
Technical parameters
1) Material(Contact parts ) Stainless steel
2) Conditioning time (S) 30-45
3) Dimension(mm) Ø462×2690
4) Steam requirement
Steam Pressure in boiler(Mpa) 0.8-1.0
Steam distributing tank(Mpa) 0.6-0.8
Conditioner steam-inlet(Mpa) 0.1-0.4
Steam consumption(t/h) 0.5
6) Power(kw) 7.5

P407.1 Hygiene Conditioner 1 7.50 37058 37058

Model:KDBZ80
Features
1) Mainly applicate for preprocessing product before pelletizing process
2) Ensure sufficient moisture is absorbed by the product
3) Improve product forming performance and quality
Consist of
1) Conditioner shell with inspection doors
2) Shaft(s) with paddles
3) Steam adding inlets
4) Driving system
5) Temperature sensor(s)
Technical parameters
1) Material(Contact parts ) 304 stainless steel
2) Conditioning time (S) 120.0
3) Dimension(mm) Ø800×3000
4) Steam requirement
Steam Pressure in boiler(Mpa) 0.8-1.0
Steam distributing tank(Mpa) 0.6-0.8
Conditioner steam-inlet(Mpa) 0.1-0.4
Steam consumption(t/h) 0.5
6) Power(Kw)-Guomao brand motor 7.5

P408 Pellet Mill 1 150 71911 71911

Model: KDZL550
Pellet mill utilizing a vertical, rotating pelleting die
Features
1)Widely used for processing powdery and flexible material to pellet of anima
apply to manufacturing poultry feed,cattle feed,fish feed etc.
2) Long machine and die lifecycle
All plates are fabricated by accurate laser cutter
High standard manufacturing and vacuum quench processing for ring die
3) Efficiently , stably, safely working
High strength and quality V belt(s)
Double motor mounted driving
4) High product quality
Two rollers eccentric press for well distribution
Adjustable cutter ( radial only) controls product length
Stainless steel pelleting chamber, ensures hygiene and avoids rust

Machine Details Page(16/27)

 Internal scrapers with tungsten carbide strength
5) Easy maintenance
Conical surface installation of the ring die
Die fast change hoisting device
6) High security protection
One magnet plate remove metal impurities in materials
Machine is protected by shear pin.
Pneumatic Bypass chute
Consist of
1) Machine base
2) Stainless steel pelleting chamber
3) Roller system (two rollers structure)
4) Rotor system
5) One alloy steel ring die(3.0mm)
6) Two sets of cutter
7) Shear pin overload protection device
8) Die fitting and manual hoisting device
9) Grease jetting device
10) Double motor with V belt driving system
11) Bypass chute
Technical parameters
1) Ring die Alloy steel
Die with circumferential clamping Device
Die linear speed (m/s) 7.00
Hole diameter(mm) Ø4
Effective working width(mm) 550
Die working temperature ≦95℃
2) Cutter Alloy steel
3) Working air pressure 0.4-0.6Mpa
4) Drive mode V belt direct drive
5) Capacity( t/h) 10
Based on general poultry feed formula, Ø4.0 mm

P409 Site Control Pannel 1 1941 1941

P410 Feeding Airlock 1 0.75 3044 3044

Model: SGFY36
Consist of
1) Air lock shell
2) Stainless steel Rotor with blade
3) Drive device
Technical parameters
1) Diameter(mm) 360
2) Power(kw) 0.75

P411 Counter flow Cooler 1 3.7 21617 21617

Model: SKLN20×20
Features
Used for cooling material to achieve ambient temperature +(3-5℃)
Consist of
1) Main machine base
2) Pellet distributor
Stainless steel for distribution mechanism
3) Vertical octagon cooling casing
Stainless steel for hood
4) Discharging grid and hopper
Technical parameters
1) Cooling time(mins) 10～15
2) Temperature after cooling 3-5℃

Machine Details Page(17/27)

 3) Moisture reducing ≥3%
4) Cooling air volume( m3 /h) 27000
5) Capacity( t/h) 10
6) Power(kw) 3.7

P412 Cyclone Discharger 1 2602 2602

Model:MSKL-1200
Technical parameters
1) Diameter(mm) Ø1200
2) Material Carbon steel

P413 Centrifugal Fan 1 15 2426 2426

Model: 4-72-7C
Technical parameters
1) Anti-corrosion surface treatment Painted
2) Main materials Carbon steel
3) Air Volume(m3/h) 13600～23300
4) Air Pressure(mmH2O) 176～244
5) Power(kw) 15

P414 Air Lock 1 1.1 904 904

Model: GFDWZY-12
Technical parameters
1) Anti-corrosion surface treatment Painted
2) Main materials Carbon steel
3) Air Volume(L) 12
4) Diameter(mm) Ø190
5) Power(kw) 1.1

P415 Crumbler 1 11 13632 13632

Model: KDSL24×110
Features
1) Adopted the two-roller structure, added a feeding roller, the crumbler works
under continuous and symmetrical state
2) Utilizing unique principle of speed discrepancy of different tooth type to crumble
the pellet diameter 2mm
Consist of
1) Drive device
2) Fast roller
3) Slow roller
4) Pneumatically controlled bypass valve
Technical parameters
1) Anti-corrosion surface treatment Painted
2) Main materials Carbon steel
3) Target to be crumbled( rpm) Φ2.0
4) Capacity(t/h) 10
5) Power(kw) 11

P416 Bucket Elevator 1 4.00 10230 10230

Model :TDTG40/28
Consist of:
1) Elevator Head Part with Dust Explosion Pressure Relief Vent
2) Middle Spouts with inspection hatch
3) Elevator Foot Parts with Belt Tension Adjustment Structure
4) PVC Belt
5) Plastic bucket
6) Drive system
Technical parameters:
1) Anti-corrosion surface treatment Painted

Machine Details Page(18/27)

 2) Belt pulleys(mm) Φ400
3) Spouting thickness(mm) 2
4) Head and feet thickness(mm) 4
5) Linear speed(m/s) 1.8
6) Bucket volume(L) 3.5
7) Height(m): 35
8) Capacity(Max,m3/h): 60
Base on ≤0.75 t/m3 material
11) Power(kw): 4

P417 ROTA-SHAKER GRADER 1 3 12220 12220

Model: SFJH130×2C
Features
Used for separating three kinds of pellet, small size, target size, over size.
Consist of
1) Frame for screen-decks
2) Screen decks with rubber balls inside to smash the lumps
3) Screen-deck support flexible plates
4) Screen deck casing with inspection holes
5) Drive system
Technical parameters
1) Screen material Steel wire knitted
2) Screen layer number 2
3) Upper screen hole size(mesh) 4
4) Lower screen hole size(mesh) 12
Default configuration, based on general formula
5) Screen inclination degree 5.5°
6) Rotating Radius(mm) 30
7) Rotating Speed(rpm) 260
8) Capacity(t/h) 10
9) Power(kw) 3

P418 Pneumatic Two Way valve 1 507 507

Model: TBDQy20x20/30°
Consist of:
1) Housing
2) Pneumatic cylinder
3) Sealing plate
4) Rotating shaft
5) Tipping plates
6) Cylinder connector
7) Rotating arm
8) Bearings with pedestal
Technical parameters:
1) Feeding area(m2) 0.04
2) Working pressure（bar） 0.6-12

FP501-FP510 Packing System

FP501 Pre-Packing Bin 2 3308 6616
Bulk Volume: 30m3 with 2x15m3
Storage 22.5 tons, 0.75 t/m3
Assembling on job site by bolts and nuts
Consist of
1) Square storage bin
2) Discharging conic hopper
3) Support frame
4) Manhole and air relief bag
Technical parameters

Machine Details Page(19/27)

 1) Main material Carbon steel
2) Surface treatment Painted
3) Body thickness(mm): 3.0
4) Hopper thickness(mm): 4.0

FP502 High Level Indicator 2 441 882

Rotary Paddle Type

FP503 Low Level Indicator 2 441 882

Rotary Paddle Type

FP504 Pneumatic Gate 2 617 1234

Model: TZMQ30×40
Consist of:
1)1 housing
2)1 cylinder
3)1 sealing plate
4)1 lashboard
5)1 end plate
6)1 rolling wheel
7)1 rolling-wheel shaft
8)1 cover plate
Technical parameters
1) Feeding area(m2) 0.12
2) Working pressure（bar） 0.6-12
3) Theoretical thrust（N） 1178
4) Theoretical tension（N） 990
5) Passage(mm): 300×400

FP506 Surge Hopper 1 330 330

Bulk Volume: 1 m3
Consist of
1) Hopper
2) Inspection door and sight glass
3) Inlet and air relief hat
Technical parameters
1) Main material Carbon steel
2) Surface treatment Painted
3) Thickness(mm) 3.0

FP507 Pellet Feed Bagging Machine 1 1.20 12794 12794

Model: LCS-50-BZ
Consist of
1) Conveying Belt
2) Variable speed gearmotor
3) Pneumatic bag clamp
4) Weighing sensor
5) PLC
6) Weighing display
Technical parameters
1) Rated weight( kg/bag) 25~50
2) Bagging speed(bags/hr) 240-360
3) Power(kw) 1.2

FP508 Sewing Machine and Belt Conveyor 1 1.5 3705 3705

Consist of
1) Sewing machine
2) Sewing machine support and height adjustor

Machine Details Page(20/27)

 3) Belt conveyor
Technical parameters
1) Belt width(mm) 400
2) Belt length(mm) 2800
3) Power(kw) 1.5

FP509 Dust Collector With Air Lock 1 3.30 4517 4517

Model: TBLMy15
Consist of:
1) Air jet device
2) Interface of filtering sleeve device
3) Hinge of compacted figured pattern plate
4) Figured pattern plate
5) Filtering bags-Anti Static
6) Safety guard for solenoid valve
7) Electrical connecting box
8) Pulse controller
9) Treating device of air source
10) Inlet of air pocket
11) Rectangular Casing with inspection door, door switch
12) Solenoid valve
13) Dust collect hopper
Technical parameters:
1) Number of filtering bags 20
2) Filtering area(m2) 25
3) Size of filtering bag(mm): 140x1600
4) Filtering cloth material Filtering bags-Anti Static
5) Cleaning way Automatical air pulse
6) Air volume(m3/h): 2250

FP510 Centrifugal Fan 1 4.00 639 639

Model: 4-68-4A
Technical parameters
1) Anti-corrosion surface treatment Painted
2) Main materials Carbon steel
3) Air Volume(m3/h) 2250
4) Air Pressure(mmH2O) 155
5) Power(kw) 4

A001-A006 Auxiliary System

A001 Liquid Adding Machine 1 6.60 12794 12794
Model: SYTZ60
Features
1) Controlled by computerized system, error in adding operation ≤ 1%
2) The liquid level and temperature can be regulated automatically
3) A supplementary pressure booster can be incorporated to prevent the oil
nozzles from dropping oil, eliminating material agglomeration
4) Used for intermittent adding all kinds of liquid nutritional ingredients
Consist of
1) One Daily Oil storage tank
2) Strainers and Drainer
3) Oil injection piping
4) Oil infusion piping
5) PLC flux controller
6) Level indicator
7) Valves and meters
8) Piping System
From oil adding system machine to mixer&coating machine
Technical parameters:

Machine Details Page(21/27)

 1) Anti-corrosion surface treatment Painted
2) Main material Carbon steel
3) Oil adding accurancy 0.01
4) Carbon steel tank(m3) 1.0
5) Drive:
• Oil infusion screw pump(from oil tank to SYTZ) : 4.4 KW
• Oil injection screw pump(from SYTZ to mixer) : 2.2 KW

A002 Steam Piping & Valving System For Pelletizer 1 BY BUYER

The buyer need to connect the main steam pipe to the steam header in the tower.

A003 Complete Air Compressor 1 BY BUYER

A004 Boiler and accessories 1 BY BUYER

A005 Hoist 1 BY BUYER

Machine Details Page(22/27)

 PART 2.Installation Material
POWER EXWORK PRICE (USD)
NO. DESCRIPTION Q'TY
KW UNIT TOTAL

Air Aspiration Networks for Dust Collecting System,Air transportation

1 12390
System, Cooling Aspiration System;

Non-standard Parts:Gravity Spouts,Connection Parts,Frame,Platform

2 11910
and other parts for Equipment

Auxiliary Materials: Standard Parts, Sealing Material, Welding

3 10485
Materials etc.

Pneumatic Elements and Auxillary Materials for Compressed Air

4 10962
Network etc.;

TOTAL AMOUNT FOR INSTALLATION MATERIAL USD 45747

Project Material Page(23/27)

 PART 3.Electrical Control System
POWER EXWORK PRICE (USD)
NO. DESCRIPTION Q'TY
KW UNIT TOTAL

1 Mycos Computer Control System 53960.00

Electrical control system includes:

1) Computer
2) PC - PLC architecture
3) Siemens S7-300 PLC
4) Original Wincc configuration software

MCC
1) For control the Motors
2) Schneider Electric Elements, Mitsubishi Inverters;
3) Danfoss frequency converter for pulverzier and extruder;
4) Control cabinet
Total Power(Kw): 444.8

1. Located in the control room of the main workshop, the MCC allows centralized operation and
controlling as well as safe and easy maintenance.
2. All electrical components inside the cabinets have high compatibility, making the system easier
to maintain and repair in case of emergency.

2 Cables,Wires，Cable-tray and others 49060.00

Consist of:
1). Cables
2). Wires
3). Standard cable-bridge
4). Other auxiliary Material
all cables for machines inside of feedmill

3 Transformer System: Owner Supply

1). Transformer
2). Power distribution cabinet
3). Cables and Standard cable-bridge from Transformer room to MCC room
4). Lighting and its wire

4 Computerized Batching System 17200.00

Model: LCP-PL(x)-2
Features:
Dynamic Accuracy: ±0.3%
Including:
a. Load Cells;
b. Communication Interfaces;
c. D/A (Electrical Signal and Digital
Signal Conversion Device);
d. Freqency Inverter for Screw Discharger;
e. Micro Processor for Proportioning System;
f.Printer
g.UPS Power

TOTAL AMOUNT FOR ELECTRICAL CONTROL SYSTEM USD 120220.00

Electrical Page(24/27)
 PART 5. Installation Supervision
POWER EXWORK PRICE (USD)
NO. DESCRIPTION Q'TY
KW UNIT TOTAL

Seller's Scope:

1 Installation Supervision 30000.00

※ Seller will send one qualified team with 2 persons. one of them is mechanical
engineer, one is the electrical engineer.

※ Seller will cover all the China local transportation fee, international flight tcikets
※ Seller will cover the salary of Seller engineers for 5 months,If for reasons not due to
Seller's fault, over this period, the buyer should pay aditionally USD 300/Day/Person
based on 48 hours/week, 8 hours working/day.

2 Commissioning Supervision 15000.00

※ Seller will send one qualified team with 2 persons for commissioning and training.

※ Seller will cover all the China local transportation fee, international flight tcikets
※ Seller will cover the salary of Seller engineers for 1 months,If for reasons not due to
Seller's fault, over this period, the buyer should pay aditionally USD 300/Day/Person
based on 48 hours/week, 8hours working/day.

Buyer's Scope:

※ The buyer should cooperate visa apply for Seller engineers.

※ The buyer should provide enough labours and be managed by buyer to work with Seller team.
※ The buyer should provide food , accommodation and other necessary living goods for Seller team.
※ The buyer should provide crane and other necessary installation tools

TOTAL AMOUNT FOR SUPERVISION INSTALLATION USD 45000.00

Installation Page(25/27)
 PART 6.Packing & Transport Freight
POWER EXWORK PRICE (USD)
NO. DESCRIPTION Q'TY
KW UNIT TOTAL

※Machine Packing Cost 7700.00

※Inland Freight And Clearing Fee to Shanghai Port 9900.00

TOTAL AMOUNT FOR PACKING&INLAND INALND FREIGHT USD 17600.00

Packing&Transport Page(26/27)
 Payment

PAYMENT :
※ 30% of total payment by TT as downpayment;
※ 70% of total payment by TT 30 days before shiping;

Delivery :

※ The time for Ex-works delivery is 4 months from advance payment and L/C.
※ The delivery time is after designing confirmed by buyer and downpayment received by Seller.
※ FOB SHANGHAI PORT

Guarantee:

※ The Seller will guarantee the delivered equipments for a period (“warranty period”) of 12 months
immediately after commissioning but not later than 18 months after delivery. The guarantee will be started
after one week for testing period.
There is under no circumstance, guarantee provided for defects caused entirely or partly due the following:
(1).Normal wear-off and natural un-forecast force.
(2).Non-compliance with the operation and maintenance instructions at normal usage.
(3).Application of non-original parts.
(4).Materials, operating procedures being altered under explicit instruction from the Buyer.This condition will
be including the honesty for long-term mutual benefits.

PERIOD OF VALIDITY FOR THIS QUOTATION LASTS TWO(2) MONTHS.

Bank details:
--T/T TO BENEFICIARY:
BANK NAME: Agricultural Bank of China Jiangsu Branch, P.R. China
SWIFT: ABOCCNBJ100
ADDRESS: BAQIAO INDUSTRIAL ZONE, XINJI TOWN,YIZHENG CITY JIANGSU CHINA
ACCOUNT NUMBER: 10160114040002250 (USD)
ACCOUNT NAME: YANGZHOU KERUNDE MACHINERY CO., LTD.

Payment Page(27/27)