SAFETY DATA SHEET

MasterFlow 870

Version Revision Date: SDS Number: Date of last issue: -

1.0 15.07.2020 000000264820 Date of first issue: 15.07.2020

SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

Product name : MasterFlow 870

Product code : 000000000050589178

Manufacturer or supplier's details

Company : MB Solutions Australia Pty Ltd

Address : 11 Stanton Road, Seven Hills

NSW 2147

Telephone : +611300227300

Emergency telephone : ChemTel: +1-813-248-0585; Australia: 1-300-954-583

Recommended use of the chemical and restrictions on use

Recommended use : Product for construction chemicals

SECTION 2. HAZARDS IDENTIFICATION

GHS Classification
Skin corrosion/irritation : 2

Serious eye damage/eye irri- : 1

tation

Specific target organ toxicity - : 3 (respiratory tract irritation)

single exposure

GHS label elements

Hazard pictograms :

Signal Word : Danger

Hazard Statements : H318 Causes serious eye damage.

H315 Causes skin irritation.
H335 May cause respiratory irritation.

Precautionary Statements :
Prevention:
P280 Wear protective gloves/ protective clothing/ eye protec-
tion/ face protection.
P261 Avoid breathing dust.
P264 Wash face, hands and any exposed skin thoroughly after
handling.
Response:
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water

1 / 10
SAFETY DATA SHEET

MasterFlow 870

Version Revision Date: SDS Number: Date of last issue: -

1.0 15.07.2020 000000264820 Date of first issue: 15.07.2020

for several minutes. Remove contact lenses, if present and

easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER/ doctor/
P304 + P340 IF INHALED: Remove person to fresh air and
keep comfortable for breathing.
P303 + P352 IF ON SKIN (or hair): Wash with plenty of soap
and water.
P332 + P313 If skin irritation occurs: Get medical advice/ atten-
tion.
P362 + P364 Take off contaminated clothing and wash it before
reuse.
Storage:
P403 + P233 Store in a well-ventilated place. Keep container
tightly closed.
P405 Store locked up.
Disposal:
P501 Dispose of contents/container to appropriate hazardous
waste collection point.

Other hazards which do not result in classification

If applicable information is provided in this section on other hazards which do not result in classi-
fication but which may contribute to the overall hazards of the substance or mixture.

SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Chemical nature : modified cement mortar

Components
Chemical name CAS-No. Concentration (% w/w)
calcium oxide 1305-78-8 >= 1 -< 3
Cement, portland, chemicals 65997-15-1 >= 25 -< 50

SECTION 4. FIRST AID MEASURES

General advice : First aid personnel should pay attention to their own safety.
Remove contaminated clothing.

If inhaled : After inhalation of dust.

Keep patient calm, remove to fresh air.
If difficulties occur:
Seek medical attention.
In case of skin contact : After contact with skin, wash immediately with plenty of water
and soap.
Under no circumstances should organic solvent be used.
If irritation develops, seek medical attention.
In case of eye contact : Wash affected eyes for at least 15 minutes under running
water with eyelids held open, consult an eye specialist.
If swallowed : Immediately rinse mouth and then drink 200-300 ml of water,
seek medical attention.
Do not induce vomiting unless told to by a poison control cen-
ter or doctor.
Most important symptoms : Causes skin irritation.

2 / 10
SAFETY DATA SHEET

MasterFlow 870

Version Revision Date: SDS Number: Date of last issue: -

1.0 15.07.2020 000000264820 Date of first issue: 15.07.2020

and effects, both acute and Causes serious eye damage.

delayed May cause respiratory irritation.
Notes to physician : Treat symptomatically.

SECTION 5. FIRE-FIGHTING MEASURES

Suitable extinguishing media : Foam

Water spray
Dry powder
Carbon dioxide (CO2)
Product itself is non-combustible. Only the packaging materi-
als can catch fire. The extinguishing agents normally used are
sufficient.
Unsuitable extinguishing : water jet
media
Specific hazards during fire : Product is not combustible or explosive.
fighting No particular hazards known.

Specific extinguishing meth- : Product itself is non-combustible; fire extinguishing method of

ods surrounding areas must be considered.
The degree of risk is governed by the burning substance and
the fire conditions.
Dispose of fire debris and contaminated extinguishing water in
accordance with official regulations.
Special protective equipment : Wear a self-contained breathing apparatus.
for fire-fighters

SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protec- : Avoid dust formation.

tive equipment and emer- Avoid contact with skin and eyes.
gency procedures Use personal protective clothing.
Handle in accordance with good building materials hygiene
and safety practice.

Environmental precautions : Do not discharge into drains/surface waters/groundwater.

Methods and materials for : Sweep/shovel up.

containment and cleaning up

SECTION 7. HANDLING AND STORAGE

Advice on protection against : No special precautions necessary.

fire and explosion

Advice on safe handling : Avoid dust formation.

The Cement contained in this product reacts alkaline when in
contact with water or humidity. This may cause severe irrita-
tion of skin or mucous membranes. The humidity of the skin or
mucous membranes is enough for this reaction. Prolonged
direct contact to the dry product should be avoided therefore.
Avoid inhalation of dusts.
Avoid skin contact.
Pour downwind and allow as little free fall as possible while
emptying bags into equipment.

3 / 10
SAFETY DATA SHEET

MasterFlow 870

Version Revision Date: SDS Number: Date of last issue: -

1.0 15.07.2020 000000264820 Date of first issue: 15.07.2020

Breathing must be protected when large quantities are de-

canted without local exhaust ventilation.
Hygiene measures : When using, do not eat, drink or smoke.
Hands and/or face should be washed before breaks and at the
end of the shift.
At the end of the shift the skin should be cleaned and skin-
care agents applied.
Gloves must be inspected regularly and prior to each use.
Replace if necessary (e.g. pinhole leaks).
Remove contaminated clothing immediately and clean before
re-use or dispose it if necessary.
Further information on stor- : Containers should be stored tightly sealed in a dry place.
age conditions

SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Ingredients with workplace control parameters

Components CAS-No. Value type Control parame- Basis
(Form of ters / Permissible
exposure) concentration
calcium oxide 1305-78-8 TWA 2 mg/m3 AU OEL
TWA value 2 mg/m3 ACGIHTLV
TWA value 2 mg/m3 AU NOEL
TWA value 2 mg/m3 OEL (AU)
TWA 2 mg/m3 ACGIH
Limestone 1317-65-3 TWA 10 mg/m3 AU OEL
(Calcium car-
bonate)
TWA value 10 mg/m3 OEL (AU)
(Inhalable
dust)
Gypsum (Ca(SO4).2H2O) 13397-24-5 TWA 10 mg/m3 AU OEL
TWA value 10 mg/m3 ACGIHTLV
(Inhalable
fraction)
TWA value 10 mg/m3 AU NOEL
(Inhalable
dust)
TWA value 10 mg/m3 OEL (AU)
(Inhalable
dust)
TWA (Inhal- 10 mg/m3 ACGIH
able particu- (Calcium)
late matter)
Cement, portland, chemicals 65997-15-1 TWA 10 mg/m3 AU OEL
TWA value 1 mg/m3 ACGIHTLV
(Respirable
fraction)
TWA value 10 mg/m3 AU NOEL
(Inhalable
dust)
TWA (Res- 1 mg/m3 ACGIH

4 / 10
SAFETY DATA SHEET

MasterFlow 870

Version Revision Date: SDS Number: Date of last issue: -

1.0 15.07.2020 000000264820 Date of first issue: 15.07.2020

pirable par-
ticulate mat-
ter)
Fumes, silica 69012-64-2 TWA (Res- 2 mg/m3 AU OEL
pirable dust)
TWA value 2 mg/m3 OEL (AU)
(Respirable
fraction)
TWA value 2 mg/m3 AU NOEL
(Respirable
dust)
TWA value 2 mg/m3 AU NOEL
(Respirable
dust)
Quartz (SiO2) 14808-60-7 TWA (Res- 0,1 mg/m3 AU OEL
pirable dust)
TWA value 0,025 mg/m3 ACGIHTLV
(Respirable
fraction)
(dust) OEL (AU)
TWA value 0,1 mg/m3 OEL (AU)
TWA value 0,1 mg/m3 AU NOEL
(Respirable
dust)
TWA value 0,1 mg/m3 AU NOEL
(Respirable
dust)
TWA (Res- 0,025 mg/m3 ACGIH
pirable par- (Silica)
ticulate mat-
ter)
Personal protective equipment
Respiratory protection : Breathing protection if dusts are formed.
Filter type : Particle filter with medium efficiency for solid and liquid parti-
cles (e.g. EN 143 or 149, Type P2 or FFP2)
Hand protection

Remarks : nitrile coated cotton gloves (e.g. EN 388, 374)

Eye protection : Safety glasses with side-shields.
Skin and body protection : Body protection must be chosen based on level of activity
and exposure.
light protective clothing
Protective measures : Avoid contact with the skin, eyes and clothing.
Avoid inhalation of dusts.
In order to prevent contamination while handling, closed
working clothes and working gloves should be used.
Handle in accordance with good building materials hygiene
and safety practice.

SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance : powder

Color : dark gray

5 / 10
SAFETY DATA SHEET

MasterFlow 870

Version Revision Date: SDS Number: Date of last issue: -

1.0 15.07.2020 000000264820 Date of first issue: 15.07.2020

Odor : odorless

Odor Threshold : Not determined due to potential health hazard by inhalation.

pH : > 11 (approx. 20 °C)

(as aqueous suspension)

Melting temperature : > 1.000 °C

boiling temperature : not applicable

Flash point : Study scientifically not justified.

Flammability (solid, gas) : not flammable

Bulk density : approx. 1.500 - 2.000 kg/m3

Solubility(ies)
Water solubility : insoluble

Decomposition temperature : No decomposition if stored and handled as pre-

scribed/indicated.

Explosive properties : Not explosive

Not explosive

Oxidizing properties : not fire-propagating

Self-heating substances : No data available

SECTION 10. STABILITY AND REACTIVITY

Reactivity : No hazardous reactions if stored and handled as pre-

scribed/indicated.
Chemical stability : The product is stable if stored and handled as pre-
scribed/indicated.
Possibility of hazardous reac- : The product is stable if stored and handled as pre-
tions scribed/indicated.

Conditions to avoid : See SDS section 7 - Handling and storage.

Incompatible materials : Strong bases
Strong acids
Hazardous decomposition : No hazardous decomposition products if stored and handled
products as prescribed/indicated.

SECTION 11. TOXICOLOGICAL INFORMATION

Acute toxicity
Not classified based on available information.
Skin corrosion/irritation
Causes skin irritation.

6 / 10
SAFETY DATA SHEET

MasterFlow 870

Version Revision Date: SDS Number: Date of last issue: -

1.0 15.07.2020 000000264820 Date of first issue: 15.07.2020

Serious eye damage/eye irritation

Causes serious eye damage.
Respiratory or skin sensitization

Skin sensitization
Not classified based on available information.
Respiratory sensitization
Not classified based on available information.
Product:
Remarks : Chromate in this product has been reduced. Sensitization due
to chromate within stated shelf-live is unlikely.

Chronic toxicity

Germ cell mutagenicity

Not classified based on available information.
Carcinogenicity
Not classified based on available information.
Reproductive toxicity
Not classified based on available information.
STOT-single exposure
May cause respiratory tract irritation.
STOT-repeated exposure
Not classified based on available information.
Aspiration toxicity
Not classified based on available information.
Further information

Product:
Remarks : Health injuries are not known or expected under normal use.
The product has not been tested. The statements on toxicolo-
gy have been derived from the properties of the individual
components.

SECTION 12. ECOLOGICAL INFORMATION

Ecotoxicity

Product:

Ecotoxicology Assessment
Acute aquatic toxicity : This product has no known ecotoxicological effects.

Chronic aquatic toxicity : This product has no known ecotoxicological effects.

7 / 10
SAFETY DATA SHEET

MasterFlow 870

Version Revision Date: SDS Number: Date of last issue: -

1.0 15.07.2020 000000264820 Date of first issue: 15.07.2020

Persistence and degradability

Product:
Biodegradability : Remarks: Not applicable for inorganic substances.

Bioaccumulative potential

Components:

calcium oxide:
Partition coefficient: n- : Remarks: The value has not been determined because the
octanol/water substance is inorganic.

Cement, portland, chemicals:

Partition coefficient: n- : GLP: no
octanol/water Remarks: not applicable

Mobility in soil

Product:
Distribution among environ- : Remarks: Following exposure to soil, adsorption to solid soil
mental compartments particles is probable, therefore contamination of groundwater
is not expected.
The substance will not evaporate into the atmosphere from
the water surface.

Other adverse effects

Product:
Results of PBT and vPvB : This substance/mixture contains no components considered
assessment to be either persistent, bioaccumulative and toxic (PBT), or
very persistent and very bioaccumulative (vPvB) at levels of
0.1% or higher.

Additional ecological infor- : Do not discharge product into the environment without control.
mation The product has not been tested. The statements on ecotoxi-
cology have been derived from the properties of the individual
components.

SECTION 13. DISPOSAL CONSIDERATIONS

Disposal methods
Waste from residues : Observe national and local legal requirements.
Residues should be disposed of in the same manner as the
substance/product.
Contaminated packaging : Completely emptied packagings can be given for recycling.

SECTION 14. TRANSPORT INFORMATION

International Regulations

8 / 10
SAFETY DATA SHEET

MasterFlow 870

Version Revision Date: SDS Number: Date of last issue: -

1.0 15.07.2020 000000264820 Date of first issue: 15.07.2020

UNRTDG
Not regulated as a dangerous good
IATA-DGR
Not regulated as a dangerous good
IMDG-Code
Not regulated as a dangerous good
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable for product as supplied.
Domestic regulation

SECTION 15. REGULATORY INFORMATION

Safety, health and environmental regulations/legislation specific for the substance or mix-
ture
If other regulatory information applies that is not already provided elsewhere in this safety data
sheet, then it is described in this subsection.
Standard for the Uniform Scheduling of Medicines and Poisons (SUSMP): Not Scheduled

The ingredients of this product are reported in the following inventories:

AICS : On the inventory, or in compliance with the inventory

SECTION 16. OTHER INFORMATION

Revision Date : 15.07.2020

Date format : dd.mm.yyyy
Full text of other abbreviations
ACGIH : USA. ACGIH Threshold Limit Values (TLV)
ACGIHTLV : American Conference of Governmental Industrial Hygienists -
threshold limit values (US)
AU NOEL : National Workplace OELs, Workplace Exposure Standards for
Airborne Contaminants (Australia)
AU OEL : Australia. Workplace Exposure Standards for Airborne Con-
taminants.
OEL (AU) : Adopted National Exposure Standards for Atmospheric Con-
taminants in the Occupational Environment (Australia)

ACGIH / TWA : 8-hour, time-weighted average

ACGIHTLV / TWA value : Time Weighted Average (TWA):
AU NOEL / TWA value : Time Weighted Average (TWA):
AU OEL / TWA : Exposure standard - time weighted average
OEL (AU) / TWA value : Time Weighted Average (TWA):

AICS - Australian Inventory of Chemical Substances; ANTT - National Agency for Transport by
Land of Brazil; ASTM - American Society for the Testing of Materials; bw - Body weight; CMR -
Carcinogen, Mutagen or Reproductive Toxicant; DIN - Standard of the German Institute for
Standardisation; DSL - Domestic Substances List (Canada); ECx - Concentration associated with
x% response; ELx - Loading rate associated with x% response; EmS - Emergency Schedule;

9 / 10
SAFETY DATA SHEET

MasterFlow 870

Version Revision Date: SDS Number: Date of last issue: -

1.0 15.07.2020 000000264820 Date of first issue: 15.07.2020

ENCS - Existing and New Chemical Substances (Japan); ErCx - Concentration associated with
x% growth rate response; ERG - Emergency Response Guide; GHS - Globally Harmonized Sys-
tem; GLP - Good Laboratory Practice; IARC - International Agency for Research on Cancer; IATA
- International Air Transport Association; IBC - International Code for the Construction and
Equipment of Ships carrying Dangerous Chemicals in Bulk; IC50 - Half maximal inhibitory con-
centration; ICAO - International Civil Aviation Organization; IECSC - Inventory of Existing Chemi-
cal Substances in China; IMDG - International Maritime Dangerous Goods; IMO - International
Maritime Organization; ISHL - Industrial Safety and Health Law (Japan); ISO - International Or-
ganisation for Standardization; KECI - Korea Existing Chemicals Inventory; LC50 - Lethal Con-
centration to 50 % of a test population; LD50 - Lethal Dose to 50% of a test population (Median
Lethal Dose); MARPOL - International Convention for the Prevention of Pollution from Ships;
n.o.s. - Not Otherwise Specified; Nch - Chilean Norm; NO(A)EC - No Observed (Adverse) Effect
Concentration; NO(A)EL - No Observed (Adverse) Effect Level; NOELR - No Observable Effect
Loading Rate; NOM - Official Mexican Norm; NTP - National Toxicology Program; NZIoC - New
Zealand Inventory of Chemicals; OECD - Organization for Economic Co-operation and Develop-
ment; OPPTS - Office of Chemical Safety and Pollution Prevention; PBT - Persistent, Bioaccumu-
lative and Toxic substance; PICCS - Philippines Inventory of Chemicals and Chemical Substanc-
es; (Q)SAR - (Quantitative) Structure Activity Relationship; REACH - Regulation (EC) No
1907/2006 of the European Parliament and of the Council concerning the Registration, Evalua-
tion, Authorisation and Restriction of Chemicals; SADT - Self-Accelerating Decomposition Tem-
perature; SDS - Safety Data Sheet; TCSI - Taiwan Chemical Substance Inventory; TDG - Trans-
portation of Dangerous Goods; TSCA - Toxic Substances Control Act (United States); UN - Unit-
ed Nations; UNRTDG - United Nations Recommendations on the Transport of Dangerous Goods;
vPvB - Very Persistent and Very Bioaccumulative; WHMIS - Workplace Hazardous Materials In-
formation System

The information provided in this Safety Data Sheet is correct to the best of our knowledge, infor-
mation and belief at the date of its publication. The information given is designed only as a guid-
ance for safe handling, use, processing, storage, transportation, disposal and release and is not
to be considered a warranty or quality specification. The information relates only to the specific
material designated and may not be valid for such material used in combination with any other
materials or in any process, unless specified in the text.

AU / EN

10 / 10