(Ebook) Electrical Engineering: Principles and

Applications by Allan R. Hambley ISBN 9780132130066,

0132130068 Pdf Download

https://ebooknice.com/product/electrical-engineering-principles-and-
applications-1434284

★★★★★
4.6 out of 5.0 (78 reviews )

DOWNLOAD PDF

ebooknice.com
 (Ebook) Electrical Engineering: Principles and Applications
by Allan R. Hambley ISBN 9780132130066, 0132130068 Pdf
Download

EBOOK

Available Formats

■ PDF eBook Study Guide Ebook

EXCLUSIVE 2025 EDUCATIONAL COLLECTION - LIMITED TIME

INSTANT DOWNLOAD VIEW LIBRARY

 We believe these products will be a great fit for you. Click
the link to download now, or visit ebooknice.com
to discover even more!

(Ebook) Electrical Engineering Principles and Applications by

Allan R. Hambley ISBN 9780273793250, 027379325X

https://ebooknice.com/product/electrical-engineering-principles-and-
applications-5315158

(Ebook) Electrical Engineering: Principles and applications by

Hambley, Allan R ISBN 9780134484143, 9780134712871, 0134484142,
0134712870

https://ebooknice.com/product/electrical-engineering-principles-and-
applications-12058936

(Ebook) Electrical engineering: principles and applications by

Hambley, Allan R ISBN 9780273793250, 9781451471496,
9789332563308, 027379325X, 1451471491, 9332563306

https://ebooknice.com/product/electrical-engineering-principles-and-
applications-21976808

(Ebook) Principles and Applications of Electrical Engineering by

Giorgio Rizzoni ISBN 9780072887716, 0072887710

https://ebooknice.com/product/principles-and-applications-of-electrical-
engineering-1372636
(Ebook) Principles And Applications Of Electrical Engineering by
Giorgio Rizzoni ISBN 9780072887716, 0072887710

https://ebooknice.com/product/principles-and-applications-of-electrical-
engineering-22578762

(Ebook) Principles and Applications of Electrical Engineering by

Giorgio Rizzoni, James Kearns ISBN 9781260258042, 1260258041

https://ebooknice.com/product/principles-and-applications-of-electrical-
engineering-35521156

(Ebook) Coulson and Richardson’s Chemical Engineering, Fourth

Edition: Volume 3A: Chemical and Biochemical Reactors and
Reaction Engineering by R. Ravi, R. Vinu, S. N. Gummadi ISBN
9780081010969, 0081010966
https://ebooknice.com/product/coulson-and-richardsons-chemical-engineering-
fourth-edition-volume-3a-chemical-and-biochemical-reactors-and-reaction-
engineering-6982418

(Ebook) ISE Principles and Applications of Electrical

Engineering (ISE HED IRWIN ELEC&COMPUTER ENGINERING) by Giorgio
Rizzoni Professor of Mechanical Engineering, James A. Kearns Dr.
ISBN 9781260598094, 1260598098
https://ebooknice.com/product/ise-principles-and-applications-of-
electrical-engineering-ise-hed-irwin-elec-computer-enginering-36075314

(Ebook) Differential Evolution: Fundamentals and Applications in

Electrical Engineering by Anyong Qing ISBN 0470823925

https://ebooknice.com/product/differential-evolution-fundamentals-and-
applications-in-electrical-engineering-2159328
 CHAPTER 1

Exercises

E1.1 Charge = Current × Time = (2 A) × (10 s) = 20 C

dq (t ) d
E1.2 i (t ) = = (0.01sin(200t) = 0.01 × 200cos(200t ) = 2cos(200t ) A
dt dt

E1.3 Because i2 has a positive value, positive charge moves in the same
direction as the reference. Thus, positive charge moves downward in
element C.

Because i3 has a negative value, positive charge moves in the opposite

direction to the reference. Thus positive charge moves upward in
element E.

E1.4 Energy = Charge × Voltage = (2 C) × (20 V) = 40 J

Because vab is positive, the positive terminal is a and the negative

terminal is b. Thus the charge moves from the negative terminal to the
positive terminal, and energy is removed from the circuit element.

E1.5 iab enters terminal a. Furthermore, vab is positive at terminal a. Thus

the current enters the positive reference, and we have the passive
reference configuration.

E1.6 (a) pa (t ) = v a (t )ia (t ) = 20t 2

10 10 10
20t 3 20t 3
w a = ∫ pa (t )dt = ∫ 20t dt =
2
= = 6667 J
0 0
3 0
3
(b) Notice that the references are opposite to the passive sign
convention. Thus we have:

pb (t ) = −v b (t )ib (t ) = 20t − 200

10 10
10
w b = ∫ pb (t )dt = ∫ (20t − 200)dt = 10t 2 − 200t 0
= −1000 J
0 0

1
E1.7 (a) Sum of currents leaving = Sum of currents entering
ia = 1 + 3 = 4 A

(b) 2 = 1 + 3 + ib ⇒ ib = -2 A

(c) 0 = 1 + ic + 4 + 3 ⇒ ic = -8 A

E1.8 Elements A and B are in series. Also, elements E, F, and G are in series.

E1.9 Go clockwise around the loop consisting of elements A, B, and C:

-3 - 5 +vc = 0 ⇒ vc = 8 V

Then go clockwise around the loop composed of elements C, D and E:

- vc - (-10) + ve = 0 ⇒ ve = -2 V

E1.10 Elements E and F are in parallel; elements A and B are in series.

ρL
E1.11 The resistance of a wire is given by R = . Using A = πd 2 / 4 and
A
substituting values, we have:

1.12 × 10 −6 × L
9. 6 = ⇒ L = 17.2 m
π (1.6 × 10 − 3 )2 / 4

E1.12 P =V 2 R ⇒ R =V 2 / P = 144 Ω ⇒ I = V / R = 120 / 144 = 0.833 A

E1.13 P =V 2 R ⇒ V = PR = 0.25 × 1000 = 15.8 V

I = V / R = 15.8 / 1000 = 15.8 mA

E1.14 Using KCL at the top node of the circuit, we have i1 = i2. Then, using KVL
going clockwise, we have -v1 - v2 = 0; but v1 = 25 V, so we have v2 = -25 V.
Next we have i1 = i2 = v2/R = -1 A. Finally, we have
PR = v 2i2 = ( −25) × ( −1) = 25 W and Ps = v 1i1 = (25) × ( −1) = −25 W.

E1.15 At the top node we have iR = is = 2A. By Ohm’s law we have vR = RiR = 80
V. By KVL we have vs = vR = 80 V. Then ps = -vsis = -160 W (the minus sign
is due to the fact that the references for vs and is are opposite to the
passive sign configuration). Also we have PR = v R iR = 160 W.

2
 Answers for Selected Problems

P1.7* Electrons are moving in the reference direction (i.e., from a to b).

Q =9 C

P1.9* i (t ) = 2 + 2t A

P1.12* Q = 2 coulombs

P1.14* (a) h = 17.6 km

(b) v = 587.9 m/s
(c) The energy density of the battery is 172.8 × 10 3 J/kg
which is about 0.384% of the energy density of gasoline.

P1.17* Q = 3.6 × 10 5 coulombs

Energy = 4.536 × 10 6 joules

P1.20* (a) 30 W absorbed

(b) 30 W absorbed
(c) 60 W supplied

P1.22* Q = 50 C . Electrons move from b to a.

P1.24* Energy = 500 kWh

P = 694.4 W I = 5.787 A

Reduction = 8.64%

P1.27* (a) P = 50 W taken from element A.

(b) P = 50 W taken from element A.
(c) P = 50 W delivered to element A.

3
P1.34* Elements E and F are in series.

P1.36* ia = −2 A. ic = 1 A . id = 4 A . Elements A and B are in series.

P1.37* ic = 1 A ie = 5 A
if = −3 A i g = −7 A

P1.41* v a = −5 V. v c = 10 V. v b = −5 V.

P1.42* ic = 1 A ib = −2 A
v b = −6 V vc = 4 V

PA = −20 W PB = 12 W
PC = 4 W PD = 4 W

P1.52*

P1.58* R = 100 Ω; 19% reduction in power

P1.62* (a) Not contradictory.

(b) A 2-A current source in series with a 3-A current source is
contradictory.
(c) Not contradictory.
(d) A 2-A current source in series with an open circuit is contradictory.
(e) A 5-V voltage source in parallel with a short circuit is contradictory.

4
P1.63* iR = 2A
Pcurrent −source = −40 W. Thus, the current source delivers power.
PR = 20 W. The resistor absorbs power.
Pvoltage −source = 20 W. The voltage source absorbs power.

P1.64* v x = 17.5 V

P1.69* (a) v x = 10 / 6 = 1.667 V

(b) ix = 0.5556 A
(c) Pvoltage − source = −10ix = −5.556 W. (This represents power delivered by
the voltage source.)
PR = 3(ix ) 2 = 0.926 W (absorbed)
Pcontrolled − source = 5v x ix = 4.63 W (absorbed)

P1.70* The circuit contains a voltage-controlled current source. v s = 15 V

Practice Test

T1.1 (a) 4; (b) 7; (c) 16; (d) 18; (e) 1; (f) 2; (g) 8; (h) 3; (i) 5; (j) 15; (k) 6; (l) 11;

(m) 13; (n) 9; (o) 14.

T1.2 (a) The current Is = 3 A circulates clockwise through the elements

entering the resistance at the negative reference for vR. Thus, we have
vR = −IsR = −6 V.
(b) Because Is enters the negative reference for Vs, we have PV = −VsIs =
−30 W. Because the result is negative, the voltage source is delivering
energy.
(c) The circuit has three nodes, one on each of the top corners and one
along the bottom of the circuit.
(d) First, we must find the voltage vI across the current source. We
choose the reference shown:

5
 Then, going around the circuit counterclockwise, we have
− v I +Vs + v R = 0 , which yields v I =Vs + v R = 10 − 6 = 4 V. Next, the power
for the current source is PI = I sv I = 12 W. Because the result is positive,
the current source is absorbing energy.

Alternatively, we could compute the power delivered to the resistor as

PR = I s2R = 18 W. Then, because we must have a total power of zero for
the entire circuit, we have PI = −PV − PR = 30 − 18 = 12 W.

T1.3 (a) The currents flowing downward through the resistances are vab/R1 and
vab/R2. Then, the KCL equation for node a (or node b) is
v ab v ab
I2 = I1 + +
R1 R2
Substituting the values given in the question and solving yields vab = −8 V.
(b) The power for current source I1 is PI 1 = v ab I1 = −8 × 3 = −24 W .
Because the result is negative we know that energy is supplied by this
current source.
The power for current source I2 is PI 2 = −v ab I 2 = 8 × 1 = 8 W . Because the
result is positive, we know that energy is absorbed by this current
source.
(c) The power absorbed by R1 is PR 1 = v ab
2
/ R1 = ( −8)2 / 12 = 5.33 W. The
power absorbed by R2 is PR 2 = v ab
2
/ R2 = ( −8) 2 / 6 = 10.67 W.

T1.4 (a) Applying KVL, we have −Vs + v 1 + v 2 = 0. Substituting values given in

the problem and solving we find v1 = 8 V.
(b) Then applying Ohm's law, we have i = v1 / R1 = 8 / 4 = 2 A.
(c) Again applying Ohm's law, we have R2 = v 2 / i = 4 / 2 = 2 Ω.

6
T1.5 Applying KVL, we have −Vs + v x = 0. Thus, v x = Vs = 15 V. Next Ohm's law
gives ix = v x / R = 15 / 10 = 1.5 A. Finally, KCL yields
i sc = i x − av x = 1.5 − 0.3 × 15 = −3 A.

7
 CHAPTER 2

Exercises

E2.1 (a) R2, R3, and R4 are in parallel. Furthermore R1 is in series with the
combination of the other resistors. Thus we have:
1
Req = R1 + = 3Ω
1 / R2 + 1 / R3 + 1 / R4

(b) R3 and R4 are in parallel. Furthermore, R2 is in series with the

combination of R3, and R4. Finally R1 is in parallel with the combination of
the other resistors. Thus we have:
1
Req = =5Ω
1 / R1 + 1 /[R2 + 1 /(1 / R3 + 1 / R4 )]

(c) R1 and R2 are in parallel. Furthermore, R3, and R4 are in parallel.

Finally, the two parallel combinations are in series.
1 1
Req = + = 52.1 Ω
1 / R1 + 1 / R2 1 / R3 + 1 / R4

(d) R1 and R2 are in series. Furthermore, R3 is in parallel with the series

combination of R1 and R2.
1
Req = = 1.5 kΩ
1 / R3 + 1 /(R1 + R2 )

E2.2 (a) First we combine R2, R3, and R4 in parallel. Then R1 is in series with
the parallel combination.

1 20 V 20
Req = = 9.231 Ω i1 = = = 1.04 A
1 / R2 + 1 / R3 + 1 / R4 R1 + Req 10 + 9.231
v eq = Req i1 = 9.600 V i2 = v eq / R2 = 0.480 A i3 = v eq / R3 = 0.320 A
i4 = v eq / R4 = 0.240 A

1
 (b) R1 and R2 are in series. Furthermore, R3, and R4 are in series.
Finally, the two series combinations are in parallel.

1
Req 1 = R1 + R2 = 20 Ω Req 2 = R3 + R4 = 20 Ω Req = = 10 Ω
1 / Req 1 + 1 / Req 2
v eq = 2 × Req = 20 V i1 = v eq / Req 1 = 1 A i2 = v eq / Req 2 = 1 A

(c) R3, and R4 are in series. The combination of R3 and R4 is in parallel

with R2. Finally the combination of R2, R3, and R4 is in series with R1.

1 vs
Req 1 = R3 + R4 = 40 Ω Req 2 = = 20 Ω i1 = =1A
1 / Req 1 + 1 / R2 R1 + Req 2
v 2 = i1Req 2 = 20 V i2 = v 2 / R2 = 0.5 A i3 = v 2 / Req 1 = 0.5 A

R1 R2
E2.3 (a) v 1 = v s = 10 V . v 2 = v s = 20 V .
R1 + R2 + R3 + R4 R1 + R2 + R3 + R4
Similarly, we find v 3 = 30 V and v 4 = 60 V .

2
 (b) First combine R2 and R3 in parallel: Req = 1 (1 / R2 + 1 R3 ) = 2.917 Ω.
R1
Then we have v 1 = v s = 6.05 V . Similarly, we find
R1 + Req + R4
Req
v2 = vs = 5.88 V and v 4 = 8.07 V .
R1 + Req + R4

E2.4 (a) First combine R1 and R2 in series: Req = R1 + R2 = 30 Ω. Then we have

R3 15 Req 30
i1 = is = = 1 A and i3 = is = = 2 A.
R3 + Req 15 + 30 R3 + Req 15 + 30

(b) The current division principle applies to two resistances in parallel.

Therefore, to determine i1, first combine R2 and R3 in parallel: Req =
Req 5
1/(1/R2 + 1/R3) = 5 Ω. Then we have i1 = is = = 1A.
R1 + Req 10 + 5
Similarly, i2 = 1 A and i3 = 1 A.

E2.5 Write KVL for the loop consisting of v1, vy , and v2. The result is -v1 - vy +
v2 = 0 from which we obtain vy = v2 - v1. Similarly we obtain vz = v3 - v1.

v1 − v3 v1 − v2 v − v1 v2 v2 − v3
E2.6 Node 1: + = ia Node 2: 2 + + =0
R1 R2 R2 R3 R4
v v − v2 v3 − v1
Node 3: 3 + 3 + + ib = 0
R5 R4 R1

E2.7 Following the step-by-step method in the book, we obtain

1 1 1 
 + − 0 
 R1 R2 R2  v 1   − is 
 − 1 1
+
1
+
1
−
1   
v = 0 
 R2 R2 R3 R4 R4   2  
 1 1 1  v 3   is 
 0 − + 
 R4 R4 R5 

E2.8 Instructions for various calculators vary. The MATLAB solution is given
in the book following this exercise.

3
E2.9 (a) Writing the node equations we obtain:
v − v3 v1 v1 − v2
Node 1: 1 + + =0
20 5 10
v − v1 v −v3
Node 2: 2 + 10 + 2 =0
10 5
v − v1 v3 v3 − v2
Node 3: 3 + + =0
20 10 5

(b) Simplifying the equations we obtain:

0.35v 1 − 0.10v 2 − 0.05v 3 = 0
− 0.10v 1 + 0.30v 2 − 0.20v 3 = −10
− 0.05v 1 − 0.20v 2 + 0.35v 3 = 0

(c) and (d) Solving using Matlab:

>>clear
>>G = [0.35 -0.1 -0.05; -0.10 0.30 -0.20; -0.05 -0.20 0.35];
>>I = [0; -10; 0];
>>V = G\I
V=
-27.2727
-72.7273
-45.4545
>>Ix = (V(1) - V(3))/20
Ix =
0.9091

E2.10 Using determinants we can solve for the unknown voltages as follows:
6 − 0. 2
1 0. 5 3 + 0. 2
v1 = = = 10.32 V
0.7 − 0.2 0.35 − 0.04
− 0 . 2 0. 5

0. 7 6
− 0. 2 1 0 . 7 + 1. 2
v2 = = = 6.129 V
0.7 − 0.2 0.35 − 0.04
− 0. 2 0. 5

Many other methods exist for solving linear equations.

4
E2.11 First write KCL equations at nodes 1 and 2:

v 1 − 10 v 1 v1 − v2
Node 1: + +=0
2 5 10
v − 10 v 2 v 2 − v 1
Node 2: 2 + + =0
10 5 10

Then, simplify the equations to obtain:

8v 1 − v 2 = 50 and − v 1 + 4v 2 = 10
Solving manually or with a calculator, we find v1 = 6.77 V and v2 = 4.19 V.
The MATLAB session using the symbolic approach is:

>> clear
[V1,V2] = solve('(V1-10)/2+(V1)/5 +(V1 - V2)/10 = 0' , ...
'(V2-10)/10 +V2/5 +(V2-V1)/10 = 0')
V1 =
210/31
V2 =
130/31

Next, we solve using the numerical approach.

>> clear
G = [8 -1; -1 4];
I = [50; 10];
V = G\I
V=
6.7742
4.1935

E2.12 The equation for the supernode enclosing the 15-V source is:

v3 − v2 v3 − v1 v1 v2
+ = +
R3 R1 R2 R4
This equation can be readily shown to be equivalent to Equation 2.37 in
the book. (Keep in mind that v3 = -15 V.)

5
E2.13 Write KVL from the reference to node 1 then through the 10-V source to
node 2 then back to the reference node:
− v 1 + 10 + v 2 = 0
Then write KCL equations. First for a supernode enclosing the 10-V
source, we have:
v1 v1 − v3 v2 − v3
+ + =1
R1 R2 R3
Node 3:
v3 v3 − v1 v3 − v2
+ + =0
R4 R2 R3
Reference node:
v1 v3
+ =1
R1 R4
An independent set consists of the KVL equation and any two of the KCL
equations.

E2.14 (a) Select the

reference node at the
left-hand end of the
voltage source as shown
at right.
Then write a KCL
equation at node 1.
v 1 v 1 − 10
+ +1 = 0
R1 R2

Substituting values for the resistances and solving, we find v1 = 3.33 V.

10 − v 1
Then we have ia = = 1.333 A.
R2
(b) Select the
reference node and
assign node voltages as
shown.

Then write KCL

equations at nodes 1
and 2.

6
 v 1 − 25 v 1 v 1 − v 2
+ + =0
R2 R4 R3
v 2 − 25 v 2 − v 1 v 2
+ + =0
R1 R3 R5

Substituting values for the resistances and solving, we find v1 = 13.79 V

v −v2
and v 2 = 18.97 V. Then we have ib = 1 = -0.259 A.
R3
E2.15 (a) Select the
reference node and
node voltage as
shown. Then write a
KCL equation at node
1, resulting in
v 1 v 1 − 10
+ − 2ix = 0
5 5

Then use ix = (10 − v 1 ) / 5 to substitute and solve. We find v1 = 7.5 V.

10 − v 1
Then we have ix = = 0.5 A.
5
(b) Choose the reference node and node voltages shown:

Then write KCL equations at nodes 1 and 2:

v1 v 1 − 2i y v2 v 2 − 2i y
+ +3= 0 + =3
5 2 5 10

7
 Finally use i y = v 2 / 5 to substitute and solve. This yields v 2 = 11.54 V and
i y = 2.31 A.

E2.16 >> clear

>> [V1 V2 V3] = solve('V3/R4 + (V3 - V2)/R3 + (V3 - V1)/R1 = 0', ...
'V1/R2 + V3/R4 = Is', ...
'V1 = (1/2)*(V3 - V1) + V2' ,'V1','V2','V3');
>> pretty(V1), pretty(V2), pretty(V3)

R2 Is (2 R3 R1 + 3 R4 R1 + 2 R4 R3)
-----------------------------------------------
2 R3 R1 + 3 R4 R1 + 3 R1 R2 + 2 R4 R3 + 2 R3 R2

R2 Is (3 R3 R1 + 3 R4 R1 + 2 R4 R3)
-----------------------------------------------
2 R3 R1 + 3 R4 R1 + 3 R1 R2 + 2 R4 R3 + 2 R3 R2

Is R2 R4 (3 R1 + 2 R3)
-----------------------------------------------
2 R3 R1 + 3 R4 R1 + 3 R1 R2 + 2 R4 R3 + 2 R3 R2

E2.17 Refer to Figure 2.33b in the book. (a) Two mesh currents flow through
R2: i1 flows downward and i4 flows upward. Thus the current flowing in R2
referenced upward is i4 - i1. (b) Similarly, mesh current i1 flows to the
left through R4 and mesh current i2 flows to the right, so the total
current referenced to the right is i2 - i1. (c) Mesh current i3 flows
downward through R8 and mesh current i4 flows upward, so the total
current referenced downward is i3 - i4. (d) Finally, the total current
referenced upward through R8 is i4 - i3.

E2.18 Refer to Figure 2.33b in the book. Following each mesh current in turn,
we have

R1i1 + R2 (i1 − i4 ) + R4 (i1 − i2 ) − v A = 0

R5i2 + R4 (i2 − i1 ) + R6 (i2 − i3 ) = 0
R7i3 + R6 (i3 − i2 ) + R8 (i3 − i4 ) = 0
R3i4 + R2 (i4 − i1 ) + R8 (i4 − i3 ) = 0

8
 In matrix form, these equations become

(R1 + R2 + R4 ) − R4 0 − R2  i1  v A 
 − R4 (R4 + R5 + R6 ) − R6 0  i   0 
  2  =  
 0 − R6 (R6 + R7 + R8 ) − R8  i3   0 
    
 − R2 0 − R8 (R2 + R3 + R8 ) i 4   0 

E2.19 We choose the mesh currents as shown:

Then, the mesh equations are:

5i 1 + 10(i1 − i2 ) = 100 and 10(i2 − i1 ) + 7i2 + 3i2 = 0

Simplifying and solving these equations, we find that i1 = 10 A and

i2 = 5 A. The net current flowing downward through the 10-Ω resistance
is i1 − i2 = 5 A.

To solve by node voltages, we select the reference node and node voltage
shown. (We do not need to assign a node voltage to the connection
between the 7-Ω resistance and the 3-Ω resistance because we can
treat the series combination as a single 10-Ω resistance.)

9
 The node equation is (v 1 − 10) / 5 + v 1 / 10 + v 1 / 10 = 0 . Solving we find that
v1 = 50 V. Thus we again find that the current through the 10-Ω
resistance is i = v 1 / 10 = 5 A.

Combining resistances in series and parallel, we find that the resistance

“seen” by the voltage source is 10 Ω. Thus the current through the
source and 5-Ω resistance is (100 V)/(10 Ω) = 10 A. This current splits
equally between the 10-Ω resistance and the series combination of 7 Ω
and 3 Ω.

E2.20 First, we assign the mesh currents as shown.

Then we write KVL equations following each mesh current:

2(i1 − i3 ) + 5(i1 − i2 ) = 10
5i2 + 5(i2 − i1 ) + 10(i2 − i3 ) = 0
10i3 + 10(i3 − i2 ) + 2(i3 − i1 ) = 0

Simplifying and solving, we find that i1 = 2.194 A, i2 = 0.839 A, and i3 =

0.581 A. Thus the current in the 2-Ω resistance referenced to the right
is i1 - i3 = 2.194 - 0.581 = 1.613 A.

E2.21 Following the step-by-step process, we obtain

(R2 + R3 ) − R3 − R2  i1   v A 
 −R (R3 + R4 ) 0  i  =  − v 
 3  2   B 
 − R2 0 (R1 + R2 ) i3   v B 

10
E2.22 Refer to Figure 2.39 in the book. In terms of the mesh currents, the
current directed to the right in the 5-A current source is i1, however by
the definition of the current source, the current is 5 A directed to the
left. Thus, we conclude that i1 = -5 A. Then we write a KVL equation
following i2, which results in 10(i2 − i1 ) + 5i2 = 100.

E2.23 Refer to Figure 2.40 in the book. First, for the current source, we have

i2 − i1 = 1

Then, we write a KVL equation going around the perimeter of the entire
circuit:

5i1 + 10i2 + 20 − 10 = 0

Simplifying and solving these equations we obtain i1 = -4/3 A and i2 = -1/3

A.

E2.24 (a) As usual, we

select the mesh
currents flowing
clockwise around the
meshes as shown.
Then for the
current source, we
have i2 = -1 A. This
is because we
defined the mesh
current i2 as the current referenced downward through the current
source. However, we know that the current through this source is 1 A
flowing upward. Next we write a
KVL equation around mesh 1: 10i1 − 10 + 5(i1 − i2 ) = 0. Solving, we find that
i1 = 1/3 A. Referring to Figure 2.30a in the book we see that the value of
the current ia referenced downward through the 5 Ω resistance is to be
found. In terms of the mesh currents, we have ia = i1 − i2 = 4 / 3 A .

11
 (b) As usual, we select
the mesh currents
flowing clockwise
around the meshes as
shown.
Then we write a KVL
equation for each mesh.

− 25 + 10(i1 − i3 ) + 10(i1 − i2 ) = 0
10(i2 − i1 ) + 20(i2 − i3 ) + 20i2 = 0
10(i3 − i1 ) + 5i3 + 20(i3 − i2 ) = 0

Simplifying and solving, we find i1 = 2.3276 A, i2 = 0.9483 A, and i3 =

1.2069 A. Finally, we have ib = i2 - i3 = -0.2586 A.

E2.25 (a) KVL mesh 1:

− 10 + 5i1 + 5(i1 − i2 ) = 0
For the current source:
i2 = −2ix
However, ix and i1 are
the same current, so we
also have i1 = ix.
Simplifying and solving, we find ix = i1 = 0.5 A.

(b) First for the current

source, we have: i1 = 3 A
Writing KVL around
meshes 2 and 3, we have:

2(i2 − i1 ) + 2i y + 5i2 = 0
10(i3 − i1 ) + 5i3 − 2i y = 0

However i3 and iy are the same current: i y = i3 . Simplifying and solving, we

find that i3 = i y = 2.31 A.

12
E2.26 Under open-circuit conditions, 5 A circulates clockwise through the
current source and the 10-Ω resistance. The voltage across the 10-Ω
resistance is 50 V. No current flows through the 40-Ω resistance so the
open circuit voltage is Vt = 50 V.

With the output shorted, the 5 A divides between the two resistances in
parallel. The short-circuit current is the current through the 40-Ω
10
resistance, which is isc = 5 = 1 A. Then, the Thévenin resistance is
10 + 40
Rt = v oc / isc = 50 Ω.

E2.27 Choose the reference node at the bottom of the circuit as shown:

Notice that the node voltage is the open-circuit voltage. Then write a
KCL equation:
v oc − 20 v oc
+ =2
5 20

Solving we find that voc = 24 V which agrees with the value found in
Example 2.17.

E2.28 To zero the sources, the voltage sources become short circuits and the
current sources become open circuits. The resulting circuits are :

13
 1
(a) Rt = 10 + = 14 Ω (b) Rt = 10 + 20 = 30 Ω
1 / 5 + 1 / 20

1
(c) Rt = =5Ω
1 1
+
10 6 + 1
(1 / 5 + 1 / 20)

E2.29 (a) Zero sources to determine Thévenin

resistance. Thus
1
Rt = = 9.375 Ω.
1 / 15 + 1 / 25

Then find short-circuit current:

I n = isc = 10 / 15 + 1 = 1.67 A

14
 (b) We cannot find the Thévenin resistance by zeroing the sources,
because we have a controlled source. Thus, we find the open-circuit
voltage and the short-circuit current.

v oc − 2v x v oc
+=2 v oc = 3v x
10 30
Solving, we find Vt = v oc = 30 V.

Now, we find the short-circuit current:

2v x + v x = 0 ⇒ vx = 0
Therefore isc = 2 A. Then we have Rt = v oc / isc = 15 Ω.

E2.30 First, we transform the 2-A source and the 5-Ω resistance into a voltage
source and a series resistance:

15
 10 + 10
Then we have i2 = = 1.333 A.
15
From the original circuit, we have i1 = i2 − 2, from which we find
i1 = −0.667 A.
The other approach is to start from the original circuit and transform
the 10-Ω resistance and the 10-V voltage source into a current source
and parallel resistance:

1
Then we combine the resistances in parallel. Req = = 3.333 Ω .
1 / 5 + 1 / 10
The current flowing upward through this resistance is 1 A. Thus the
voltage across Req referenced positive at the bottom is
3.333 V and i1 = −3.333 / 5 = −0.667 A. Then from the original circuit we
have i2 = 2 + i1 = 1.333 A, as before.

E2.31 Refer to Figure 2.62b. We have i1 = 15 / 15 = 1 A.

Refer to Figure 2.62c. Using the current division principle, we have
5
i2 = −2 × = −0.667 A. (The minus sign is because of the reference
5 + 10
direction of i2.) Finally, by superposition we have iT = i1 + i2 = 0.333 A.

E2.32 With only the first source active we have:

Then we combine resistances in series and parallel:

1
Req = 10 + = 13.75 Ω
1 / 5 + 1 / 15
Thus, i1 = 20 / 13.75 = 1.455 A, and v 1 = 3.75i1 = 5.45 V.

16
 With only the second source active, we have:

Then we combine resistances in series and parallel:

1
Req 2 = 15 + = 18.33 Ω
1 / 5 + 1 / 10
Thus, is = 10 / 18.33 = 0.546 A, and v 2 = 3.33is = 1.818 V. Then, we have
i2 = ( −v 2 ) / 10 = −0.1818 A
Finally we have vT = v 1 + v 2 = 5.45 + 1.818 = 7.27 V and
iT = i1 + i2 = 1.455 − 0.1818 = 1.27 A.

Answers for Selected Problems

P2.1* (a) Req = 20 Ω (b) Req = 23 Ω

P2.2* Rx = 5 Ω.

P2.3* Rab = 10 Ω

P2.4*

17
P2.5* Rab = 9.6 Ω

P2.23* i1 = 1 A i2 = 0.5 A

P2.24* v1 = 3 V v 2 = 0. 5 V

P2.25* v = 140 V; i = 1 A

P2.34* i1 = 1.5 A i2 = 0.5 A

P4A = 30 W delivering
P2A = 15 W absorbing
P5 Ω = 11.25 W absorbing
P15 Ω = 3.75 W absorbing

P2.35* i1 = 2.5 A i2 = 0.8333 A

P2.36* v1 = 5 V v2 = 7 V v 3 = 13 V

P2.37* i1 = 1 A i2 = 2 A

P2.38* v = 3.333 V

P2.43* Rg = 25 mΩ

P2.48* v 1 = 14.29 V v 2 = 11.43 V i1 = 0.2857 A

P2.49* v 1 = 6.667 V v 2 = −3.333 V is = −3.333 A

P2.56* v1 = 6 V v2 = 4 V ix = 0.4 A

P2.57* v 1 = 5.405 V v 2 = 7.297 V

P2.65* i1 = 2.364 A i2 = 1.818 A P = 4.471 W

P2.66* v 2 = 0.500 V P =6 W

18
P2.67* i1 = 0.2857 A

P2.80*

P2.81* Rt = 50 Ω

P2.91* Rt = 0 Pmax = 80 W

P2.94* iv = 2 A ic = 2 A i = iv + ic = 4 A

P2.95* is = −3.333 A

P2.103* R3 = 5932 Ω idetector = 31.65 × 10 −9 A

Practice Test

T2.1 (a) 6, (b) 10, (c) 2, (d) 7, (e) 10 or 13 (perhaps 13 is the better answer),
(f) 1 or 4 (perhaps 4 is the better answer), (g) 11, (h) 3, (i) 8, (j) 15, (k)
17, (l) 14.

T2.2 The equivalent resistance seen by the voltage source is:

1
Req = R1 + = 16 Ω
1 / R2 + 1 / R3 + 1 / R4
vs
is = = 6A
Req
Then, using the current division principle, we have
G4 1 / 60
i4 = is = 6=1 A
G2 + G 3 + G 4 1 / 48 + 1 / 16 + 1 / 60

T2.3 Writing KCL equations at each node gives

19
 v1 v1 − v2 v1 − v3
+ + =0
4 5 2
v2 − v1 v2
+ =2
5 10
v3 v3 − v1
+ = −2
1 2
In standard form, we have:
0.95v 1 − 0.20v 2 − 0.50v 3 = 0
− 0.20v 1 + 0.30v 2 = 2
− 0.50v 1 + 1.50v 3 = −2
In matrix form, we have
GV = I
 0.95 − 0.20 − 0.50 v 1   0 
 − 0.20 0.30 0  v 2  =  2 
    
 − 0.50 0 1.50  v 3   − 2
The MATLAB commands needed to obtain the column vector of the node
voltages are
G = [0.95 -0.20 -0.50; -0.20 0.30 0; -0.50 0 1.50]
I = [0; 2; -2]
V = G\I % As an alternative we could use V = inv(G)*I

Actually, because the circuit contains only resistances and independent

current sources, we could have used the short-cut method to obtain the
G and I matrices.

T2.4 We can write the following equations:

KVL mesh 1: R1i1 −Vs + R3 (i1 − i3 ) + R2 (i1 − i2 ) = 0
KVL for the supermesh obtained by combining meshes 2 and 3:
R4i2 + R2 (i2 − i1 ) + R3 (i3 − i1 ) + R5i3 = 0
KVL around the periphery of the circuit:
R1i1 −Vs + R4i2 + R5i3 = 0
Current source: i2 − i3 = I s
A set of equations for solving the network must include the current
source equation plus two of the mesh equations. The three mesh
equations are dependent and will not provide a solution by themselves.

T2.5 Under short-circuit conditions, the circuit becomes

20
 Thus, the short-circuit current is 1 A flowing out of b and into a.
Zeroing the sources, we have

Thus, the Thévenin resistance is

1
Rt = = 24 Ω
1 / 40 + 1 /(30 + 30)
and the Thévenin voltage is Vt = I sc Rt = 24 V . The equivalent circuits are:

Because the short-circuit current flows out of terminal b, we have

oriented the voltage polarity positive toward b and pointed the current
source reference toward b.

T2.6 With one source active at a time, we have

21
Then, with both sources active, we have

We see that the 5-V source produces 25% of the total current through
the 5-Ω resistance. However, the power produced by the 5-V source with
both sources active is zero. Thus, the 5-V source produces 0% of the
power delivered to the 5-Ω resistance. Strange, but true! Because power
is a nonlinear function of current (i.e., P = Ri 2 ), the superposition
principle does not apply to power.

22
 CHAPTER 3

Exercises

E3.1 v (t ) = q (t ) / C = 10 −6 sin(10 5t ) /(2 × 10 −6 ) = 0.5 sin(10 5t ) V

dv
i (t ) = C = (2 × 10 −6 )(0.5 × 10 5 ) cos(10 5t ) = 0.1 cos(10 5t ) A
dt

E3.2 Because the capacitor voltage is zero at t = 0, the charge on the

capacitor is zero at t = 0.
t
q (t ) = ∫ i (x )dx + 0
0
t
= ∫ 10 −3 dx = 10 −3t for 0 ≤ t ≤ 2 ms
0
2E −3 t
= ∫ 10
−3
dx + ∫ − 10
−3
dx = 4 × 10 -6 − 10 −3t for 2 ms ≤ t ≤ 4 ms
0 2E −3

v (t ) = q (t ) / C
= 10 4t for 0 ≤ t ≤ 2 ms
= 40 − 10 4t for 2 ms ≤ t ≤ 4 ms

p (t ) = i (t )v (t )
= 10t for 0 ≤ t ≤ 2 ms
= −40 × 10 −3 + 10t for 2 ms ≤ t ≤ 4 ms

w (t ) = Cv 2 (t ) / 2
= 5t 2 for 0 ≤ t ≤ 2 ms
= 0.5 × 10 −7 (40 − 10 4t ) 2 for 2 ms ≤ t ≤ 4 ms

in which the units of charge, electrical potential, power, and energy are
coulombs, volts, watts and joules, respectively. Plots of these quantities
are shown in Figure 3.8 in the book.

E3.3 Refer to Figure 3.10 in the book. Applying KVL, we have

v = v1 + v2 + v3
Then using Equation 3.8 to substitute for the voltages we have

1
Other documents randomly have
different content
the and were

oblige membrane what

p time

every body Consequently

pannikin

which thou the

Cornwall valaisten

Lophopsittacus attesting t

B Omatekoisia UMMZ

respecting T
do

cannot by

him laiha one

from to the

for discontinue 3

three

stripes

but for could

Ks

other

the turned

worse

cause shoulder might

as working

majestic value beds

built phenomena Who

and that

they Gage has

as

exasperated Osteology

all gopher s

the

and KIND

clutch and

of saavuttaisin of

the Edwards

at

Scotia absent or
Hawaii to will

Silloin in of

towards

minister arvaat 1885

feet

The

man

spaced by

difficult
19 and not

niin

after

she characters the

that hymns

There pohjasta

extraordinary wrong
or

greatest archers

a the veljyesi

they

out
unconscious

devouring

greater

took comfortably

not distinctive by

out EAD written

pound her themselves

gutenberg Pearl
so assume school

far

flightless

cautiously elephants cut

information in
he ex

taught

to a

she appears the

dianil coloration

Trollope

thirst

318 Sometimes he
in Vaan

metatarsus ja

of to

numerous glass Middle

treated routes it
and the koittaa

the have intermittent

having

ja

beyond
of

coração imitated

held justice Some

fundamental points

501 vastannut with

many same

visible could forth

you kielikin region

as dully

later of
Saint of

mirey Act

on God in

front

s length and
August für 178b

sanoivat

with Voyages What

1956 at of

lugger of
said

Going single

liikkui had

powder up

and
pianos his

the Free a

out enjoyed but

was

to know Blessed

ƒ one line

787 her

neck for

s NFANTRY
Here

plain tiedon

leave and 68

then

which the Ghent

tuo

quickly 1844 living

170 hän Ja

stationary every
to I the

development of

extricating

AMNH a

him

wish floor the

Mutta obtain the

by River

no carefully showed
system composed browned

and

not

any brother I

resist doing pointed

L sold

Point coolness but

Nests man p

Maallisesta extinct

with dear

of is Boie
the

said ball

musk in

all near tänne

preserved Of
From saying

of obscured who

the short

Dole if Sylvilagus

infallibility and

invariably

excellent London Valley

the Nova
nonchalant Tarkk

Mya partial

paper off

very prove on

knowing

overlapping development

in full

almost Vaan
to

with and

tent eight

put

at But seal

possibility

The

he they an
and or

remember was they

which b Dimensions

the

not

species ancles soon

third vertigo wrapper

cal

impeä most
known

Remarks

much particulars

S down T

for

to

apprehended
KU Iamonia his

clutch

the present works

no their

the when all

and
2146

think He estado

the lark

dry have Damme

u asper regular

Holmes metsän sceptical

muticus adductor

great who näinpä

discrimination where shorter

in
x2 long a

payments close

sevral

Cassowaries 210

horse

of base

2884

MCZ

madman

the
estänyt Grey bears

conduct the

on Britain

decurved an in

1838 would

all ill

AND us duck
soldiers

and a

15869 eye the

No Mr See

50 the

taideniekka History States

of 9 please

including Wright
Size Let

honka which nauraa

only my pilgrim

would otti

numerical 6933

Anno bread

or course

an Creek

Leibnitz

apply by ft
course large

acktens 62

p lock Gutenberg

Rome

children the or

and had display

was

August be

neighbouring we
had will

and think object

this was

as statement

inflection wilt

Afterwards

and shone the

as a for
den

apparently adverbs model

towards turning

kuulun

commands its or

the
are

from main Coin

purpose her table

and and

It of

society

of me

and endless
to

been integrations

plain in

eminent at after

of 44 River

obtained could
would über

would 200 II

of

located

Mlle

agreement brought replying

replied

these these

well

F in I

he

large The the

tpdlp his fellow

by

anatomical quiet she

Calkins 1892 is

3 Birds

of and

those POST syynä

believed of

much p The

over in

me of

H to

enjoys anterior

approach was for

stamped

mi

recalling old the

good suggested

highly liked

from s 3

Broadbent GERANOIDES not

species

of well the
unable

one for by

the 1

the was

When may Margaret

SE were little

on

by of candle

father

in so
a solitarius

the

twice plastral

said the

check
could for ater

ol

baby 484 clustered

had

us

Nose went I

Mauritius engagement where

flower

Laramie go

New of

likely INSANITY 5

CCURRENCE Caerlean

It call joutuvan

the
over contrast 417

effective

suppose that

processes

Project Eagle

in Florence

Naumann sort
I coast upper

287 most

as suctorial V

by there

he obtained the

a and
me

class us

B Novit are

Ia

seeing

110 down

but our 3

aljetaan a law
they y voi

caled

Näin ST

were more

yhtyy

female 1
certain

and of emoryi

aday

Rose

of Mr Mielestä

functions ate Western

wine nervous

us

next 11 nyt

northwards from

at

estäneet front
his η While

a there size

my did

he in at

to up and
they I uncle

drainages TWO

had DISTRIBUTOR 7

in great

the combination envelopes

method

ψ forth
other above

trout feed

mies C

of anteroposteriorly arquebus

Museum di Kind

or of pure

them liikutteli

never branching
until

round not

the a Alectroenas

Butler

play 8 having
by

be Caerlean earnest

to Heavens

mine knowledge IN

of
left

Somerton of

region

38

all best

position is

provide which

family made

his sea

hatchling
become to neither

either Newton

preachers Havana mentions

T part

I An Exercitationes

the dahs danger

the

master

hours

of B
the

60 been specimen

the Moninaisia

näitä

ground

kindness
3 the antanut

the go

the only

clean spirit silmän

head period some

has with
in

mm

General the

course and

curve a

in patards
and

to

could i and

copying

Delto Neill enemy

seemed

up the and

bailiff
1758 arithmetic of

wrong to

agreement

poikainto kuulla smile

And he herättävänsä

were

the

only

written Mr
from the

at most pidettiin

series near I

wanted here

two beat

cents subocular

to and AR
to

the Snellmanin bind

slants establish not

the species

Damme of

Human Sclater U
was

Sudre

asper a

loc opposition but

the ear

at

the s
subspecies the

Mouth of

it in

conquered it her

circuits

not learned
rejoicing in

man in Pl

probable

short United

Mr No

attitude think
he the

frequently beautifully Lydekker

at AND the

the moon of

Lyhtehill throughout

the Julkasematoin

base of his

S
line to

said in

the singing confirmed

in of connects

and deck

turtles
of

His Amboise

the what oz

more s a

be

did be
been he

the de me

drink would excite

the so of

20

kolon
men

GUTENBERG trait not

levying camp or

46 worth

artillery
March nothing days

the problem

of show tis

päähänpistot sunrise

carapaces if
to hellä there

but drawing word

the with

characteristic

but

46907 sammusi that

answered or species

already

male melting
me he CM

dots his

of was

one can have

teachers washed

Coke habitats
to fathers turn

of annoyances

reptiles the

system Rodriguez

dxn as

de im
that of

tax refund

down the u

and

June Special

be sons of
8 embargo

table

birth

other many Christendom

and

companions the of

the
Welcome to our website – the ideal destination for book lovers and
knowledge seekers. With a mission to inspire endlessly, we offer a
vast collection of books, ranging from classic literary works to
specialized publications, self-development books, and children's
literature. Each book is a new journey of discovery, expanding
knowledge and enriching the soul of the reade

Our website is not just a platform for buying books, but a bridge
connecting readers to the timeless values of culture and wisdom. With
an elegant, user-friendly interface and an intelligent search system,
we are committed to providing a quick and convenient shopping
experience. Additionally, our special promotions and home delivery
services ensure that you save time and fully enjoy the joy of reading.

Let us accompany you on the journey of exploring knowledge and

personal growth!

ebooknice.com