@Perkins ®

Technical Data
1100 Series 1104C-44T
IOPU 72,2kW @ 2300 rev/min

Basic technical data Centre of gravity (dry)

Number of cylinders .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 4 -forward from rear of block . ... ... ... ... ... ... ... ... ... ... ... ... 275 mm
Cylinder arrangement ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... In line -above block centre line . ... ... ... ... ... ... ... ... ... ... ... ... ... 150 mm
Cycle . ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 4 storke -offset to RHS. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 20 mm
Induction system ... ... ... ... ... ... ... ... ... ... ... ... ... ...Turbocharged
Compression ratio . ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 18.23 : 1 Performance
Bore... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. 103 mm (4.05 in) Note: All data based on operation to ISO/TR143396, ISO3046/1
Stroke ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 127 mm (4.99 in) standard reference conditions
Direction of rotation ... ... ... ... ... Anti-clockwise viewed on flywheel
Firing order ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. 1,3,4,2
Test conditions
Estimated total weight (dry)... ... ... ... ... ... ... ... ... 485 kg (1069 lb) -air temperature.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... 25°C (77 °F)
-barometric pressure .. ... ... ... ... ... ... ... ... ... ...100 kPa (14.5 psi)
Estimated total weight (wet) .. ... ... ... ... ... ... ... ... 508 kg (1120 lb)
-relative humidity ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .30%
Overall dimensions
-height (from crankshaft centerline) .. ... ... ... ... .. 701 mm (27.6 in)
Sound level
(from feet) .. ... ... ... ... ... ... ... ... ... ... ... .. 961 mm (37.8 in) average sound power level for bare engine (without inlet and
exhaust) at meter ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . TBA
-length (from x-x)... ... ... ... ... ... ... ... ... ... ... ... .. 920 mm (36.2 in)
All ratings certified to within ... ... ... ... ... ... ... ... ... ... ... ... ... ± 5%
(from air filter) ... ... ... ... ... ... ... ... ... ... 1272 mm (50.0 in)
-width (widest point) .. ... ... ... ... ... ... ... ... ... ... .. 613 mm (24.1 in) If the engine is to operate in ambient conditions other than those of
the test conditions, suitable adjustments must be made for these
Moments of inertia (kgm²) changes. For full details, contact Perkins Technical Service
-crank axis. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 25 kgm² Department.
-horizontal axis .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 48 kgm²
-longitudinal axis ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 34 kgm² Caution: The airflows shown in this table will provide acceptable
cooling for an open power unit operating in ambient temperatures
of up to 53 °C (46 °C if a canopy fitted). If the power unit is to be
enclosed totally, a cooling test should be done to check that the
engine cooling is acceptable. If there is insufficient cooling, contact
Perkins Technical Service Department.

General installation
Type of operation and application
Designation Units
Engine speed rev/min
1000 1200 1400 1600 1800 2000 2200 2300
kW (bhp) 35,5 (47.6) 50,3 (67.4) 60,7 (81.4) 65,5 (87.8) 70,7 (94.8) 73,5 (98.5) 74,5 (99.9) 74,5 (99.9)
Gross engine power
Btu/min 2020 2863 3455 3728 4024 4183 4240 4240

Brake mean effective pressure kPa (lbf/in²) 968 (140.3) 1143 (165.7) 1183 (171.5) 1117 (162.0) 1072 (155.4) 1002 (145.3) 924 (134.0) 883 (128.0)

Mean Piston speed m/s (ft/s) 4,2 (13.7) 5,0 (16.4) 5,9 (19.3) 6,8 (22.3) 7,6 (24.9) 8,5 (27.8) 9,3 (30.5) 9,7 (31.8)

IOPU net engine power kW (bhp) 35,3 (47.6) 50,1 (67.1) 60,2 (80.7) 64,7 (86.7) 69,6 (93.3) 72,1 (96.6) 72,8 (97.6) 72,2 (96.8)

l/min 103 123 143 165 185 206 227 240

Engine coolant flow 35kPa restriction
(UK gal/min) (27.2) (32.4) (37.7) (43.5) (48.8) (54.4) (59.9) (63.4)

Combustion air flow m³/min (ft³/min) 2,4 (85) - 4,1 (145) - - 5,6 (198) - 6,1 (215)

Exhaust gas flow (max) m³/min (ft³/min) - - 10,5 (371,0) - - 13,9 (491,0) 15,6 (551,0) -

Exhaust gas temperature (max) °C (°F) 487 (909) 536 (997) 528 (982) 523 (973) 526 (979) 537 (999) 564 (1047) 573 (1063)

Cooling fan air flow (Pusher / Puller) m³/min (ft³/min) 0,9 (31.7) 1,1 (38.8) 1,3 (45.9) 1,5 (52.9) 1,7 (60.0) 1,8 (63.5) 2,0 (70.6) 2,3 (81.2)

Energy in fuel KW 94 129 156 175 189 202 213 220

(Fuel heat of combustion) Btu/min 5350 7342 8879 9960 10757 11497 12123 12522

KW 36 49 60 67 71 74 74 74
Gross heat to power
Btu/min 2049 2789 3415 3813 4041 4212 4212 4212

KW 26 34 39 43 46 49 51 53
Energy to coolant and lubricating oil
Btu/min 1479 1935 2219 2447 2618 2789 2902 3016

KW 24 36 46 53 59 66 74 78
Energy to exhaust
Btu/min 1366 2049 2618 3016 3358 3756 4212 4439

KW 8 10 11 12 12 13 14 14
Heat to radiation
Btu/min 455 569 626 683 683 739 796 796
1104C-44T - Left side view

LHS FAN GUARD 186,3 171,1

REMOVED FOR
17 REMOVAL

CLARITY
540

404
25 REMOVAL
FAN HEIGHT
285

267,7
Y Y
212,7 MAX
20 REMOVAL

Ø 94
365,4

X
1104C-44T - Front view

613,5

Z
328,2 183,5

136

Ø 8
438,8 OVER CORE

210

700,8
682,8
490 BETWEEN HEADER PLATES

961,2
210
86,3

Y Y
260,4
12

6 - M8 X 1,25
127,2 127,2 THREADED INSERT

225 225

Z
1104C-44T - Right side view

352 X

219
626,5

362
Y Y

247,7
265,7

16 A/F
156,4 317,5
X 1272,3
1104C-44T - Rear view

Z
233,4

FUEL RETURN CONNECTION 189,9

TO SUIT 8 OR 10 DIA.BORE
RUBBER HOSE 187

FUEL INLET CONNECTION

TO SUIT 8 DIA.BORE
RUBBER HOSE

DEUTSCH DT 02P
CONNECTOR
523,6

509,1

492,8

Y Y
151,5

45°

151,5 12 - M10 X 1,5 X 20

DRILL PATTERN, FLANGE
AND SPIGOT TO NO.3 SAE
Z
1104C-44T - Plan view

X
851,2
122,7 DEUTSCH CONNECTOR
100,2 FUEL RETURN
86,4 FUEL INLET

W W
46
33,7

271
50
25

259 43,3
346,5 43,3
X 3 - M10 X 1,5 Ø 63,9
This page has been left intentionally blank
1100 Series 1104C-44T

Cooling system Fuel system

Radiator Type of injection . ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . Direct
-face area.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 0.215 m² (2.314 ft) Fuel injection pump ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... Rotary
-rows and materials .. ... ... ... ... ... ... ... ... ... ... ... ... .4 Row Aluminium Fuel atomiser.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... Multi-hole
-fins/inch and material... ... ... ... ... ... ... ... ... 9 Aluminium fins per inch Nozzle opening pressure ... ... ... ... ... ... ... ... ... . 290 MPa (42060 psi)
-width of matrix . ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 439 mm (17.2 in) Fuel lift pump
-height of matrix ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 490 mm (19.2 in) -flow/hour ... ... ... ... ... ... ... ... ... ... ... ... 120 - 150 l/h (31 - 39,6 gal/hr)
-pressure cap setting ... ... ... ... ... ... ... ... ... ... ... ... 100 kPa (14.5 psi) -pressure ... ... ... ... ... ... ... ... ... ... ... ... ... . 30 - 75 kPa (4.4 - 10.9psi)
Fan Maximum suction head... ... .. 17 kPa at 1,7 m using 8 mm Ø bore pipe
-diameter... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 457 mm (17.9 in) Maximum pressure head ... .. 10 kPa at 1,0 m using 8 mm Ø bore pipe
-drive ratio. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .1.25 : 1 Governor type.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...Mechnical
-number of blades. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...7 USA Fed off Highway EPA 2D
Fuel Specification
-material ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... Composite 89.330-96
-type.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . Pusher / Puller Density (kg/l @ 15 °C) 0.835 / 0.855
Coolant Viscosity (mm²/s @ 40 °C) 2.0 / 4.5
Recommended coolant: 50% ethylene glycol with a corrosion Sulpher Content 0.2% Max.
inhibitor (BS 658 :1992 or MOD AL39) and 50% clean fresh water. Cetane Number 45 Min.
Total system capacity
Fuel consumption - litres/hour
-with radiator . ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 15 l (26.3 pt)
Fuel consumption given 100% power rating at specified speed
-without radiator ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. 7 l (12.3 pt)
Speed 1000 1200 1400 1600 1800 2000 2200 2300
Maximum top tank temperature ... ... ... ... ... ... ... ... ... 110 °C (230 °F)
Thermostat operation range . ... ... ... ... ... ... . 82 - 93 °C (180 - 199 °F) Consumption 7.9 10.7 13.0 14.6 15.8 16.8 17.8 18.3

Electrical System Induction system

-type.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. Negative ground Maximum permissible air intake restriction at engine
-alternator . ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 12V options -clean filter .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ..3 kPa
-starter motor ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ..12V options -dirty filter ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...6,5 kPa
Cold start recommendations -air filter type... ... ... ... ... ... ... ... ... ...2 Stage cyclonic / paper element
Minimum cranking speed.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... 110 rpm
Lubrication system
Starter specification (Based on balanced engine) Lubricating oil capacity:
Starter Minimum start Lubricating oil viscosity SAE / battery -Total system .. ... ... 7,9 l (13.9 pt) Balanced 8,4 l (14.7 pt) Unbalanced
Motor temperature type -Minimum ... ... ... ... . 5,6 l (9.8 pt) Balanced 7,1 l (12.4 pt) Unbalanced
type °C °F 15W 10W 5W 0W Maximum engine operating angles. ... 25 ° Balanced, 24 ° Unbalanced
-7 19.4 B Lubricating oil pressure
-10 14 B -relief valve opens .. ... ... ... ... ... ... ... ... ... 415 - 470 kPa (60 - 68 psi)
1104A-44 -at maximum no-load speed ... ... ... ... ... ... 276 - 414 kPa (40 - 60 psi)
-15 5 B
Max continuous oil temperature . ... ... ... ... ... ... ... ... ..125 °C (257 °F)
-20 -4 B
Oil consumption at full load as a % of fuel
consumption ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 0.15%
Battery type Recommended SAE viscosity
Battery minimum performance A Single or multi grade lubricating oil which conforms to API CG4 / CH4
Commercial
Perkins or ACEA E3 / E5 must be used, see illustration below:
reference SAE BS EN Din Amp-
code
number J537(1) 50342(2) 43539.2(3) hours
643 A 660 440 400 95
647 B 770 515 465 105 0W
5W20
069 D 570 340 300 70
10W30
655 E 810 570 490 120
15W40
621 900
20W50
629 1000
20
Publication No. TPD1533E, Issue 1. Printed in England. ©Perkins Engines Company Limited.

632 1300 30
(1) Amperes for 30 seconds to 7.2V at -18 °C (0 °F), across each 12V battery. 40
(2) Amperes for 60 seconds to 8.4V at -18 °C (0 °F), across each 12V battery. -30 -20 -10 0 10 20 30 40 50oC
(3) Amperes for 30 seconds to 9.0V at -18 °C (0 °F), across each 12V battery. -22 -4 14 32 50 68 86 104 122oF
Ambient temperarture
Exhaust system W1355

Maximum back pressure for total system . ... ... ... ... ... 15 kPa (2.1 psi)
Mountings
Inside diameter of outlet flange. ... ... ... ... ... ... ... ... ... . 64 mm (2.5 in)
Maximum bending moment at
rear face of block ... ... ... ... ... ... ... ... ... ... ... ... ... . 791 Nm (583 lbf ft)

@Perkins Distributed by

Perkins Engines Company Limited

Peterborough PE1 5NA United Kingdom
Telephone +44 (0) 1733 583000
Fax +44 (0) 1733 582240
www.perkins.com

All information in the document is substantially correct at the time

of printing but may be subsequently altered by the company.