TDS0043
Established: 25 Mar 2013
Updated: 07 Mar 2017
TECHNICAL DATA SHEET FOR
ECO INTERIOR WALL SEALER
DESCRIPTION : ECO Interior Wall Sealer is a water-based, environmentally favorable
GREEN product with low VOCs (Volatile Organic Compound) and low
odour during application and drying.
It is formulated for use on most interior masonry surface to resist alkali
attack and provides good hiding coat for emulsion finishing.
TYPE : Modified Acrylic Emulsion for interior use
COLOUR : White
FINISH : Matt
USES : As a sealer for interior masonry surfaces such as:
Concrete / Cement
Fibre-Cement panels
Partition panels / Plasterboard
FEATURES : Low odour
Good adhesion and alkaline resistance
Anti-fungus property
Fast drying time
Easy application
Non-toxic. Does not contain heavy metals
Environmentally friendly paint certified under the Singapore Green
Building Product Certification Scheme
APPLICATION DATA
METHOD : Roller or brush
THEORETICAL COVERAGE : Approx 10-12 m2 / litre (30 microns DFT)
DILUTION : No dilution is necessary for best performance
SURFACE PREPARATION : Ensure surface is clean, dry and stable using the following suggested
surface treatments:
Moisture :There must not be any water residue on the surface of
the substrate. Moisture must be <4% (Sovereign moisture master)
before application
Unstable matter :Remove loose bonding film, dirt, peeling paint,
etc by high-pressure water jet wash or mechanical means such as
power brush or scraper, whichever is suitable
Page 1 of 2
TECHNICAL DATA SHEET FOR
ECO INTERIOR WALL SEALER
Contaminants :Remove dust and foreign matter by cleaning with
damp cloth. Remove oil or grease using solvent or mild detergent.
Allow surface to dry
Fungus and Algae :Wash the affected area to remove unstable
matters and micro-organisms. Apply Anti-Fungus Solution and leave
on for at least 2 hours
Hairline cracks :Fill cracks with suitable exterior grade water-
resistant putty or filler
DRYING TIME : Surface Dry - 30 minutes at 30 oC
Hard Dry - 1 hour at 30 oC
OVERCOATING TIME : 2 hours based on normal conditions
RECOMMENDED PAINTING : 1 coat of ECO Interior Wall Sealer
SYSTEM 2 coats of Finishing top coat
CLEANING : All equipment should be cleaned with water immediately after use.
GENERAL INFORMATION
SOLID CONTENT : 57 ± 2% by weight
SPECIFIC GRAVITY : 1.31 ± 2% kg/litre
PACKING : 20 litres
STORAGE : Store in a tightly sealed container in a cool dry place.
SHELF LIFE : Up to 24 months in a tightly sealed container.
PRECAUTION : Ensure good ventilation during application and drying of paint. Avoid
direct contact with sensitive skin. Use appropriate personal protective
equipment.
Refer to the product Safety Data Sheet for more information.
The information given is intended to give a description of the product performance under specific test
conditions. Nevertheless, we cannot assume any responsibility for the use of it since circumstances under
which the products are applied in practice are subjected to many variations. We reserve the right to alter
the given data without notice.
Enquiries / Contact Details : Customer Service
6265 5355 (Main Line)
6264 1603 (Fax)
www.nipponpaint.com.sg
Page 2 of 2
