SERIES F15/F30 SOFT SEATED

2-PIECE FLANGED FULL PORT BALL VALVES

WWW.BRAY.COM THE HIGH PERFORMANCE COMPANY

SPECIFICATIONS

Bray's F15 and F30 Flanged Series ball valves feature a

floating ball design for low-torque and increased cycle life.
As a standard, the larger sizes feature a trunnion-style ball
support to offer low-torque operation. The robust design
of the F-Series ball valve is ideal for demanding, industrial
applications.

SPECIFICATIONS
Body 2-Piece, Full Port
Size Range NPS 1/2 to 12 | DN 15 to 300
Pressure Ratings F15: ASME Class 150 | PN 10 & 16
F30: ASME Class 300 | PN 25 & 40
Materials Stainless Steel
Carbon Steel
Special Alloys
Design ASME B16.34*
API 608 (Available upon request)
Flange Design ASME B16.5 | DIN EN 1092-1
Face-to-Face ASME B16.10
Testing API 598
MSS SP-72
Special testing available upon request
Shutoff Rating Zero leakage, Bi-Directional
Approvals & API 607
Certifications ISO 15848-1/2
API 641
NSF/ANSI/CAN 61 & 372
CRN
PED 2014/68/EU
PE(S)R UKCA S.I. 2016:1105
SIL
ATEX
* Pressure-temperature rating, wall thickness, blowout-
proof stem
STEAM SERVICE PRESSURE RATINGS: WSP
TFM Seats Tek-Fil® Seats PEEK Seats
PSI °F PSI °F PSI °F

SPECIAL OPTIONS/SERVICES Class 150 150 365 190 383 170 374

Cavity Fillers Class 300 150 365 425 454 425 454

Media Containment Units Vacuum service to -29.9 inches Hg. gauge

Spring Return Handles
NACE MR0175 & MR0103 Materials
Vented Balls
STEAM SERVICE PRESSURE RATINGS: WSP
Polished Internals
TFM Seats Tek-Fil® Seats PEEK Seats
Characterized Ball (V-Control)
Bar °C Bar °C Bar °C
Special Cleaning
PN 10/16 10.3 185 13.1 195 11.7 190
Chlorine Service
PN 25/40 10.3 185 29.3 234 29.3 234
Silicone Free
Vacuum service to -29.9 inches Hg. gauge
Vacuum Service

© 2025 BRAY INTERNATIONAL. ALL RIGHTS RESERVED. BRAY.COM 2 of 12

STEM ASSEMBLIES BALL SUPPORT
Bray manufactures heavy duty, high quality stems with Valve Sizes 6" through 12" | DN150 - DN300
double “D” connection to ball and operator mounting. Stem As a standard, the larger sizes feature a trunnion-style ball
and ball design ensure positive contact. All Bray stems are support. This support helps to maintain continuous contact
internal entry and blowout proof for maximum safety. between the ball and seats, preventing seat damage and
through-bore leakage. The results are less seat wear, lower
torque, and longer service life.

Stem Ball

Nut and Tab Lock Washer

Pin Seat
Valve Body
Belleville Washers
Pin Packing
Packing Gland Support Pin
PEEK Protector
Stem Packing

Support Nut

Tek-Fil® Thrust Washer Set Nut

PEEK Protector Tuning Screw

Anti-Static Devices

SMART STEM
Valve Sizes 1/2" through 2" | DN15 - DN50

Bray's interchangeable family of valves feature strong, large LOCKING DEVICE

diameter stems with live-loaded, self-adjusting sealing All manually operated
utilizing Belleville washers which automatically adjust to valves feature a locking
compensate for changes in temperature and wear. Manual device to prevent accidental
adjustments which can cause damage to the seal and seat movement of ball position.
are not required. The assembly is secured by a saddle-type Valves 1/2"-2" (DN15-DN50)
lock washer which prevents stem nuts from unthreading in feature a safety trigger that
high cycle automation applications. locks the handle in the open or closed position. The handle
lock can be bypassed, if needed, with a small bolt through
the handle in the release position. On all sizes a padlock
STEM PACKING can be added to secure the handle in position, preventing
An adjustable V-ring design creates a reliable seal between unwanted movement of the ball.
the stem and body. Each stem assembly is composed of
three or four (dependent on valve size) rings providing a
very high cycle life by resisting creep and cold flow. The
thrust washer and the thrust washer protector combine to
provide a primary seal, reduce torque and prevent galling.
This arrangement is a Bray exclusive.

© 2025 BRAY INTERNATIONAL. ALL RIGHTS RESERVED. BRAY.COM 3 of 12

FEATURES & BENEFITS

1 Ball | Balls are precision machined and mirror finished 6 Secure Mount | Flanged Series valves offer ease
for bubble-tight shut off and less operating torque. of automation due to an integrally cast actuator
As an added safety feature, a hole in the stem slot of mounting pad which complies with ISO 5211 through
each ball equalizes pressure between the body cavity 2" (DN50) sizes.
and the line media flow.
7 Handle | The handles feature a standard Safety
2 Body/Endcap | 1/2"-4" (DN15-DN100) valve bodies Trigger to prevent accidental movement of ball
are investment cast and solution annealed/normalized position. Operation is easily made with one hand.
for the highest quality and added strength. All body The trigger locks the handle in the open or closed
castings are marked with a foundry heat number for position. The handle lock can be bypassed, if needed,
full traceability. Carbon steel bodies are phosphate with a small bolt through the handle in the bypass
coated for increased corrosion resistance. position. An Anti-Tamper Padlock can be used to
secure the handle in position, preventing unwanted
3 Seat | The seat design ensures bidirectional, bubble-
access. Travel stops limit the movement of handle to
tight sealing with low operating torque. The seats
set 90° intervals, preventing over travel of the ball.
are preloaded between the ball and body during
assembly to ensure sealing against low-pressure and
vacuum service.

4 Double Lock Nut Design | The double lock nuts allow

handles to be easily and safely removed while the
valve is under full line pressure.
7
5 Stem Seals | Flanged Series 1/2"-2" (DN15-DN50)
valves feature live-loaded, self-adjusting primary and
secondary sealing. Utilizing Belleville washers, the
stem seal automatically adjusts to compensate for
changes in temperature and normal wear.

Flanged Series 21/2"-12" (DN65-DN300)

valves utilize an independent packing gland which can
be easily adjusted without removing mounting 4
6
hardware or operator. The packing gland
is contoured to more uniformly
5
distribute the load across
the packing. The
primary stem seal is
a combination of a
thrust-washer and
a thrust washer 3
protector. An
1
adjustable stem
packing creates a 2
secondary seal
3
between the stem
and body. The stem
packing is composed
of RPTFE V-rings as
standard – graphite stem
packing is standard on
all fire safe valves.

© 2025 BRAY INTERNATIONAL. ALL RIGHTS RESERVED. BRAY.COM 4 of 12

FIRE SAFE - CERTIFIED TO API 607 SEAT SELECTION
Flanged Series valves with graphite stem seals have been A wide range of seat materials are available to meet most
thoroughly fire tested and certified to API 607. applications. The standard seat is TFM 1600. Options
In the event of a fire, if heat compromises the primary include:
resilient seat, the ball then makes contact with the integral > RPTFE
secondary metal seat, forming a secure seal. > UHMWPE
> Virgin PTFE
The body seal, a spiral wound stainless steel and graphite
> PEEK
gasket, prevents external leakage. The graphite stem rings
> Full metal seats
prevent stem leakage.
> Cavity Fillers
> Tek-Fil® (carbon/graphite filled TFM)
Metal-to-Metal Contact > Stainless Steel/PTFE (50/50)
Valve Body
PEEK seats offer high pressure/temperature capability.
Body Seal
Tek-Fil® seats offer reduced torque in high temperature,
high cycle, and steam service applications. TFM 1600 seats
offer the exceptional chemical resistance of PTFE plus
lower porosity and permeability, improved temperature
Burned Seat
range and reduced valve torques.
Secondary Metal Seat
Ball

PRESSURE / TEMPERATURE

Temperature (°C)
- 46 -18 38 93 149 204 260 316 371
800 55

700 48

600 41
Pressure (bar)
Pressure (psi)

500 35

400 28

300 21

200 14

100 7

- 50 0 100 200 300 400 500 600 700

Temperature (°F)

ASME Class 150 | PN 10 & 16 ASME Class 300 | PN 25 & 40 Carbon steel valves
RPTFE TFM 1600 & 50/50 PEEK Tek-Fil
® limited to -20°F (-29°C)

© 2025 BRAY INTERNATIONAL. ALL RIGHTS RESERVED. BRAY.COM 5 of 12

COMPONENTS & MATERIALS

1/2" - 2" | DN15 - DN50 VALVES Item Name Stainless Steel Carbon Steel Qty
1 Body ASTM A351 Gr CF8M ASTM A216 Gr WCB 1
> Carbon steel bodies on valve sizes 2 End Cap ASTM A351 Gr CF8M ASTM A216 Gr WCB 1
½" – 4" (DN15-DN100) are black 3 Ball ASTM A351 Gr CF8M 1
phosphate coated. 4 Seat TFM 1600 2
> All stainless steel bodies are 5 Stem ASTM A479 Type 316 1
solution annealed/normalized. 6 Body Seal Spiral Wound (316/Graphite) 1
7 Body Nut ASTM A194 Gr 8 *
8 Body Stud ASTM A193 B8 ASTM A193 B7 *
Anti-Static
9† SS304 2
Device
Packing
10 PEEK 1
Protector
Thrust Washer
11 PEEK 1
Protector
12 Thrust Washer Tek-Fil 1
13 Stem Bearing 15% RPTFE 1
28 14 Stem Packing RPTFE or Graphite **
15 Packing Gland ASTM A167 Type 304 1
25 Packing
16 ASTM A351 Gr CF8M ASTM A216 Gr WCB 1
Follower
17 Gland Bolt SS304 2
Belleville
26 18 SS301 2
29 Washer
Tab Lock
19 SS304 1
Washer
Travel Stop
19 20 ASTM A351 Gr CF8M ASTM A216 Gr WCB 1
Housing
18 21 Housing Bolt SS304 Alloy Steel 4
Zinc Plated
15 22 Travel Stop SS304
Carbon Steel
1

10 23
Travel Stop
ASTM A167 Type 304 1
24 Sleeve
14 24 Travel Stop Bolt SS304 1
25 Handle SS304 or Ductile Iron*** 1
23 26 Lock Nut ASTM A167 Type 304 2

12 Handle Set
27 Carbon Steel 1
Screw
11 28 Handle Sleeve Vinyl through 2” 1
29 Locking Device SS304 1
5
30 Snap Ring Nickel Plated Carbon Steel 2
31 Handle Junction SS304 or Ductile Iron*** 1
32 Stem bolt
4 33 Handle bolt
1

6
3

* Quantity depends on valve size.

** RPTFE packing is composed of 3
or 4 pieces depending on size.
Graphite packing is composed of
a single piece.
*** Ductile Iron used for valve sizes ≥
2½".
2 † Not shown in model

Bray offers the seat, body seal,

thrust washer and stem packing as
recommended spare parts. These
7 parts are available as a packaged
repair kit.

© 2025 BRAY INTERNATIONAL. ALL RIGHTS RESERVED. BRAY.COM 6 of 12

21/2" - 12" | DN65 - DN300 VALVES

Ball support is included on

6" (DN150) and larger F15 & F30 valves
(not shown) 31 27

30

22
30 25
25 21

20
27
30

17

16

15
10

14

13

12
11
7

8
5

2 9

6
4

SIZE RANGE HANDLE STYLE

½" - 2" Bent plate handle
2½" - 4" Cast style handle
6" - 12" Pipe style handle

© 2025 BRAY INTERNATIONAL. ALL RIGHTS RESERVED. BRAY.COM 7 of 12

F15/F30 DIMENSIONS 1/2" - 2"

D Ux4
K

øP H M
C
N-øT
C1
J L

øB øS øF

E
A

DIMENSIONS – Secure Mount (inches)

NPS H J ISO BC K L M øP U
Mounting DIA (UNC)
Flange
1/2 1.17 1.17 F04 1.65 0.31 0.61 0.25 0.37 #10-24
3/4 1.17 1.17 F04 1.65 0.31 0.61 0.25 0.37 #10-24
1 1.39 1.39 F05 1.97 0.43 0.82 0.31 0.43 1/4-20
1-1/2 1.95 1.95 F07 2.76 0.55 0.95 0.37 0.62 5/16-18
2 1.95 1.95 F07 2.76 0.55 0.95 0.37 0.62 5/16-18

DIMENSIONS – SERIES F15 - CLASS 150 (inches)

NPS A øB C C1 D E øF øS N / øT Cv Torque* Weight
lbs-in lbs
1/2 4.25 0.59 2.88 1.54 6.50 1.79 3.50 2.38 4 x 0.62 32 36 4
3/4 4.62 0.79 2.97 1.67 6.50 2.01 3.88 2.75 4 x 0.62 60 65 5
1 5.00 0.98 3.41 2.05 7.87 2.13 4.25 3.12 4 x 0.62 105 95 10
1-1/2 6.50 1.49 4.20 2.60 9.84 2.76 5.00 3.88 4 x 0.62 275 230 14
2 7.00 1.97 4.53 2.95 10.43 3.07 6.00 4.75 4 x 0.75 500 390 20.5

DIMENSIONS – SERIES F30 - CLASS 300 (inches)

NPS A øB C C1 D E øF øS N / øT Cv Torque* Weight
lbs-in lbs
1/2 5.50 0.59 2.92 1.57 6.50 2.44 3.75 2.62 4 x 0.62 32 40 5
3/4 6.00 0.79 2.97 1.67 6.50 2.72 4.62 3.25 4 x 0.75 60 70 7
1 6.50 0.98 3.41 2.05 7.87 2.91 4.88 3.50 4 x 0.75 105 108 10
1-1/2 7.50 1.49 4.04 2.60 9.84 3.27 6.12 4.50 4 x 0.88 275 270 19
2 8.50 1.97 4.53 2.95 10.43 3.94 6.50 5.00 8 x 0.75 500 445 25

Face to Face dimensions meet ASME B16.10 long pattern and short pattern (sizes 1/2 " thru 2").
*Torque at maximum rated pressure, clean water, TFM 1600 seating material. Other seat materials exhibit different torques.
Please refer to TB 1005 for specific torques.

Flow Coefficient, Cv: The flow of water through the valve at 1 psi pressure drop in U.S. Gallons per minute (Gal/Min) at 60°F.

© 2025 BRAY INTERNATIONAL. ALL RIGHTS RESERVED. BRAY.COM 8 of 12

F15/F30 DIMENSIONS 2½" – 12"

D
Ux4
K

øP H
M

J L
C1
N-øT

øB øS øF

NOTE 1
E
A

DIMENSIONS – Secure Mount (inches)

NPS H J ISO BC K L M øP U
Mounting DIA (UNC)
Flange
2-1/2 - 4 3.54 1.87 — — 1.75 3.10 0.67 1.10 1/2-13
6 3.37 3.37 F12 4.77 1.61 3.58 1.02 1.71 1/2-13
81 3.37 3.37 F12 4.77 2.131 3.581 1.02 1.71 1/2-13
10-122 4.53 4.53 F16 6.40 2.15 3.862 1.38 1.972 5/8-11

DIMENSIONS – SERIES F15 - CLASS 150 (inches)

NPS A øB C C1 D E øF øS N / øT Cv Torque* Weight
lbs-in lbs
2-1/2 7.50 2.56 6.63 3.39 15.35 3.08 7.00 5.50 4 x 0.75 780 500 36
3 8.00 2.99 6.92 3.66 15.35 3.74 7.50 6.00 4 x 0.75 1,150 650 45
4 9.00 3.99 7.59 4.39 15.35 4.47 9.00 7.50 8 x 0.75 2,100 1,505 65
6 15.50 5.98 12.38 7.17 15.35 7.62 11.00 9.50 8 x 0.88 5,000 3,250 157
8 18.00 7.87 12.66 7.60 38.98 8.35 13.50 11.75 8 x 0.88 9,600 4,750 290
10 21.00 9.84 14.80 9.88 38.98 10.47 16.00 14.25 12 x 1.00 15,000 13,700 500
12 24.00 11.81 16.37 11.46 38.98 12.01 19.00 17.00 12 x 1.00 21,000 19,700 700

DIMENSIONS – SERIES F30- CLASS 300 (inches)

NPS A øB C C1 D E øF øS N / øT Cv Torque* Weight
lbs-in lbs
2-1/2 9.50 2.56 6.55 3.39 15.35 4.18 7.50 5.88 8 x 0.88 780 600 44
3 11.12 2.99 6.85 3.72 15.35 5.57 8.25 6.62 8 x 0.88 1,150 850 61
4 12.00 3.99 7.56 4.35 15.35 5.96 10.00 7.88 8 x 0.88 2,100 2,600 96
6 15.88 5.98 12.37 7.19 38.98 7.60 12.50 10.62 12 x 0.88 5,000 5,300 243
8 19.75 7.87 13.82 8.64 38.98 9.33 15.00 13.00 12 x 1.00 9,600 7,600 430
10 22.38 9.84 — 9.69 38.98 11.18 17.50 15.25 16 x 1.12 15,000 17,800 610
12 25.50 11.81 — 11.26 38.98 12.80 20.50 17.75 16 x 1.25 21,000 24,800 950

1 For 8" F30: K=1.61, L=3.42

2 For 10" F30: L=3.82, P=2.17
NOTE 1: Ball Support as shown on Page 3 is included on 6"-12" F15 and F30 valves.
NOTE 2: 2½", 3" & 4" valves feature a NAMUR stem slot for ease of limit switch mounting.
Face to Face dimensions meet ASME B16.10 long pattern in all sizes and short pattern sizes up to 4" F15 and up to 6" F30.
*Torque at maximum rated pressure, clean water, TFM 1600 seating material. Other seat materials exhibit different torques.
Please refer to TB 1005 for specific torques.
Flow Coefficient, Cv: The flow of water through the valve at 1 psi pressure drop in U.S. Gallons per minute (Gal/Min) at 60°F.

© 2025 BRAY INTERNATIONAL. ALL RIGHTS RESERVED. BRAY.COM 9 of 12

F15/F30 DIMENSIONS 15mm - 50mm

D Ux4
K

øP H M
C
N-øT
C1
J L

øB øS øF

E
A

DIMENSIONS – Secure Mount (mm)

DN H J ISO BC K L M øP U
Mounting DIA (UNC)
Flange
15 29.7 29.7 F04 41.9 7.9 15.5 6.0 9.4 #10-24
20 29.7 29.7 F04 41.9 7.9 15.5 6.0 9.4 #10-24
25 35.0 35.0 F05 50.0 10.9 20.8 7.9 10.9 1/4-20
40 49.5 49.5 F07 70.0 14.0 24.0 9.5 15.8 5/16-18
50 49.5 49.5 F07 70.0 14.0 24.0 9.5 15.8 5/16-18

DIMENSIONS – SERIES F15 - PN10 - PN16 (mm)

DN A øB C C1 D E øF øS N / øT Kv Torque* Weight
Nm kg
15 108.0 15.0 73.25 39.0 165.0 45.5 88.9 60.5 4 x 15.8 28 4 2
20 117.0 20.0 75.40 42.4 165.0 51.0 98.6 69.9 4 x 15.8 52 7 2
25 127.0 24.9 86.69 52.0 199.9 54.0 108.0 79.0 4 x 15.8 91 11 4.5
40 165.0 37.9 106.60 66.0 249.9 70.0 127.0 98.6 4 x 15.8 238 26 6
50 177.8 50.0 115.01 74.9 264.9 78.0 152.0 120.7 4 x 19.0 433 44 9

DIMENSIONS – SERIES F30 - PN25 - PN40 (mm)

DN A øB C C1 D E øF øS N / øT Kv Torque* Weight
Nm kg
15 139.7 15.0 74.23 39.9 165.0 62.0 95.0 66.6 4 x 15.8 28 5 2
20 152.0 20.0 75.40 42.0 165.0 69.0 117.0 82.6 4 x 19.0 52 8 3
25 165.0 24.9 86.61 52.0 199.9 73.9 124.0 88.9 4 x 19.0 91 12 5
40 190.5 37.9 102.50 66.0 249.9 83.0 155.5 114.0 4 x 22.0 238 31 9
50 215.9 50.0 115.06 74.9 264.9 100.0 165.0 127.0 8 x 19.0 433 50 11

Face to Face dimensions meet ASME B16.10 long pattern and short pattern (sizes 15 DN thru 50 DN).
*Torque at maximum rated pressure, clean water, TFM 1600 seating material. Other seat materials exhibit different torques.
Please refer to TB 1005 for specific torques.

Flow Factor, Kv: The flow of water through the valve at 1 bar pressure drop in cubic meters per hour (m3/h) at 16°C.

© 2025 BRAY INTERNATIONAL. ALL RIGHTS RESERVED. BRAY.COM 10 of 12

F15/F30 DIMENSIONS 65mm - 300mm

D
Ux4
K

øP H
M

J L
C1
N-øT

øB øS øF

NOTE 1
E
A

DIMENSIONS – Secure Mount (mm)

DN H J ISO BC K L M øP U
Mounting DIA (UNC)
Flange
65 - 100 89.9 47.5 — — 44.5 78.7 17.0 27.9 1/2-13
150 85.6 85.6 F12 121.0 40.9 90.9 25.9 43.5 1/2-13
200 85.6 85.6 F12 121.0 54.0 90.9 25.9 43.5 1/2-13
250-300 115.0 115.0 F16 162.6 54.6 98.0 35.0 50.0 5/8-11

DIMENSIONS – SERIES F15 - PN10 - PN16 (mm)

DN A øB C C1 D E øF øS N / øT Kv Torque* Weight
Nm kg
65 190.5 65.0 168.40 86.0 389.9 78.0 177.8 139.7 4 x 19.0 675 56 16
80 203.0 76.0 175.65 93.0 389.9 95.0 190.5 152.0 4 x 19.0 995 73 20
100 228.6 101.0 192.90 111.5 389.9 113.5 228.6 190.5 8 x 19.0 1,817 170 29.5
150 393.7 151.9 314.55 182.0 389.9 193.6 279.0 241.0 8 x 22.0 4,325 367 71
200 457.0 199.9 321.58 193.0 990.0 212.0 342.9 298.5 8 x 22.0 8,304 537 132
250 533.0 249.9 375.85 251.0 990.0 265.9 406.0 362.0 12 x 25.0 12,975 1,548 227
300 609.6 300.0 415.85 291.0 990.0 305.0 482.6 431.8 12 x 25.0 18,165 2,226 318

DIMENSIONS – SERIES F30 - PN25 - PN40 (mm)

DN A øB C C1 D E øF øS N / øT Kv Torque* Weight
Nm kg
65 241.0 65.0 166.40 86.0 389.9 106.0 190.5 149.0 8 x 22.0 675 68 20
80 282.5 76.0 173.90 94.5 389.9 141.5 209.6 168.0 8 x 22.0 995 96 27.7
100 304.8 101.0 192.05 110.5 389.9 151.0 254.0 200.0 8 x 22.0 1,817 294 44
150 403.0 151.9 314.20 182.6 990.0 193.0 317.5 269.8 12 x 22.0 4,325 599 110
200 501.7 199.9 351.05 219.5 990.0 237.0 381.0 330.0 12 x 25.0 8,304 859 195
250 568.5 249.9 — 246.0 990.0 284.0 444.5 387.0 16 x 28.5 12,975 2,011 277
300 647.7 300.0 — 286.0 990.0 325.0 520.7 450.9 16 x 31.8 18,165 2,802 431

1 For DN200 F30: K=40.9, L=86.9

2 For DN250 F30: L=97.0, P=55.1
NOTE 1: Ball Support as shown on Page 3 is included on DN150 - 300 F15 and F30 valves.
NOTE 2: DN65 - 100 valves feature a NAMUR stem slot for ease of limit switch mounting.
Face to Face dimensions meet ASME B16.10 long pattern in all sizes and short pattern sizes up toDN100 F15 and up to DN150 F30.
*Torque at maximum rated pressure, clean water, TFM 1600 seating material. Other seat materials exhibit different torques.
Please refer to TB 1005 for specific torques.
Flow Factor, Kv: The flow of water through the valve at 1 bar pressure drop in cubic meters per hour (m3/h) at 16°C.

© 2025 BRAY INTERNATIONAL. ALL RIGHTS RESERVED. BRAY.COM 11 of 12

SINCE 1986, BRAY HAS PROVIDED FLOW CONTROL SOLUTIONS
FOR A VARIETY OF INDUSTRIES AROUND THE WORLD.

VISIT BRAY.COM TO LEARN MORE ABOUT

BRAY PRODUCTS AND LOCATIONS NEAR YOU.

HEADQUARTERS
BRAY INTERNATIONAL, INC.
13333 Westland East Blvd.
Houston, Texas 77041
Tel: +1.281.894.5454

All statements, technical information, and recommendations in this bulletin are for general
use only. Consult Bray representatives or factory for the specific requirements and material
selection for your intended application. The right to change or modify product design or
product without prior notice is reserved. Patents issued and applied for worldwide.
Bray® is a registered trademark of Bray International, Inc.

© 2025 BRAY INTERNATIONAL, INC. ALL RIGHTS RESERVED. BRAY.COM EN_F-2400_F15_30_20250618

THE HIGH PERFORMANCE COMPANY BRAY.COM