0% found this document useful (0 votes)
47 views2 pages

904J-E36TA T5046-AV 100kW@2200rpm

The document provides technical specifications for the Perkins Engine Model 904J-E36TA, including performance data, fuel specifications, and emission standards. It details the engine's power output, torque, cooling system, and auxiliary components. The document is intended for engineering and compliance purposes, with a focus on ISO rating standards and operational parameters.

Uploaded by

Oğuz Can Güden
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
47 views2 pages

904J-E36TA T5046-AV 100kW@2200rpm

The document provides technical specifications for the Perkins Engine Model 904J-E36TA, including performance data, fuel specifications, and emission standards. It details the engine's power output, torque, cooling system, and auxiliary components. The document is intended for engineering and compliance purposes, with a focus on ISO rating standards and operational parameters.

Uploaded by

Oğuz Can Güden
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Engine Model: Curve: T 5046 Sheet 1

904J-E36TA Issue: 1 Date: 29-Sep-2017


Perkins Engines Company Limited
©2017 Commercial in Confidence,
proprietary information of Development Target -
Perkins Engines Company Ltd. May be Subject to Change
Rating Standards: ISO 14396: 2002 Fuel Types: USA FED Off Highway Europe Off Highway
Production Tolerance On Power Output: +3%, -3% Fuel Specification: EPA Part 1065.703 ULSD EU 2004/26/EC Stage 3B/4
Total Barometric Pressure (kPa): 100 Density (kg/l @ 15°C): 0.840 - 0.865 0.833 - 0.837
Vapour Pressure (kPa): 1 Viscosity (mm²/s @ 40°C): 2.0 - 3.2 2.3 - 3.3
Air Inlet Temperature (°C): 25 Sulphur Content (% mass): 0.0007 - 0.0015 0.001 max
Cetane No: 40 - 50

550.0 Governing Key


550
E denotes electronic governing.
Torque, Nm

500

450 E

400

105
100.0
100

95

90

85

Power, kW
80

75

70

65

60

55

50
1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200
Speed, rev/min
Performance with fuel oil at 40°C at pump inlet.
Notes: Exhaust Quality Standard Certification Refs (Rated Speeds)
1. For duty cycle refer to Perkins Engines Smoke:
(Peterborough) Limited statement on
US EPA 40 CFR Part 1039.105.
Product Duty Usage Limitations.

Emissions:
US EPA 40 CFR Part 1039 Tier 4 Final.
EU NRM 97/68/EC Stage 5
CARB 13CCR Section 2423 Tier 4 Final
Japan MOC/MLIT non-road Step 4 Final.
Power Standard Certification Refs (Rated Speeds)
UN/ECE R120

Auxiliaries fitted to engine:


Alternator - off load.
Fan - not fitted.

Approved by: Accepted by: Issued by:


T. J. Doyle G. Williamson S.M. Ottaway
(Program Manager) (Program Engineering (Legislation Engineer)
Manager)
Date 27-Sep-2017 Date 27-Sep-2017
Rating Curves Data Sheet Curve T 5046 Sheet 2

Note1: Unless otherwise specified, all stated data is for maximum rated speed and 100% load.

General Data Cooling System


Engine Model: 904J-E36TA Heat Rejected @ Rated Speed (kW):
Number Of Cylinders: 4 Heat Rejected @ Peak Torque (kW):
Bore (mm): 98.0 Coolant Flow (litres/min):
Stroke (mm): 120.0 Thermostat - Start To Open (°C):
Configuration: Vertical In Line Thermostat - Fully Open (°C):
Displacement (litres): 3.621 Recommended Cap Pressure (kPa):
Aspiration: Turbocharged Max Top Tank Pressure (kPa):
Compression Ratio: 17 : 1
Combustion Bowl: Air System
Engine Air Flow (kg/min):
Fuel System
Induction Manifold Pressure (kPa):
Fuel Pump Model: Denso
Injection Timing (°BTDC) - Static: Charge Air Cooler System
- Dynamic (needle lift pick-up): Charge Air Cooling System: Air-to-Air
Lift Pump Pressure (Out) (kPa): Max Total Pressure Drop inc Pipes (kPa): 10.0
Fuel Pump Pressure (In) (kPa): Charge Air Cooler Heat Rejection (kW):
Fuel Filter Max Particle Size (micron): 3 - 5 (ISO) Manifold Charge Air Temperature (°C): 55.0
Fuel Return System Type: Return to Tank
Turbocharger
Lubrication System Turbocharger Type:
Lubricating Oil Specification: See Engine Specification Manual Maximum Altitude (m): 3000

Exhaust System Performance Data


Exhaust Flow (kg/min): Friction Power @ Rated Speed (kW):
Exhaust Temperature (°C): Friction Power @ Peak Torque (kW):
Torque @ 800 rev/min (Nm): Not applicable
Cold Start Capability
Unaided Start Limit (°C):
Aided Start Limit (°C):
For further performance data see table below.
Start Aid (Optional):
Minimum Cranking Speed (rev/min) - unaided:
- aided:

Performance Data Rating Standard: ISO 14396: 2002 Further Notes:


Speed Torque Power Max Exhaust Max Inlet Governing Rated speed range 2000rpm - 2200rpm
(rev/min) (Nm) (kW) Back Pressure Restriction Categories
(kPa) (kPa) (key on sht 1)
2200 434 100.0 35.1 6.5 E
2100 455 100.0
2000 478 100.0
1900 497 98.9
1800 515 97.1
1700 528 94.0
1600 540 90.5
1500 550 86.4
1400 540 79.2
1300 520 70.8
1200 495 62.2
1100 460 53.0

Internal References
Curve Issue No: 1 DCP Number(s): PRDX*6749 TAN Number:
Curve Issue Date : 29-Sep-2017 FIE EDR Number

You might also like