Ethafoam 2222
Acoustic Insulation Foam
Product Dimensions:
Ethafoam 2222 is a closed-cell polyethylene foam material designed for use as a resilient acoustic insulation layer in concrete floor structures. Key benefits include:
Thickness Roll Length Roll Width Roll Diameter Surface Area of Roll
5mm 75m 1.5m 0.75m 112.5 m2
Wall
Ethafoam 2222
Superior impact sound insulation conforms to European Building Standards. Minimal moisture retention closed-cell structure allows use in humid environments. Lightweight easy to install. Low profile installation minimal increase in floor height. Ageing resistant formulated to withstand degradation caused by alkaline in concrete floors. Highly resilient withstands the rigours of an on-site environment. Versatile can be installed as single or multiple layers dependent on space and performance requirement.
Wall
Screed
Concrete slab
Sealed Air is a leading supplier of innovative polymer films, foams, composites, coring materials and technologies for the construction industry. Our experience stretches from residential to commercial construction, including applications in floor underlayments, thermal insulation and concrete separators. We understand the importance of compliance, so we work closely with industry and government agencies to ensure alignment with building codes and regulations.
Ethafoam 2222
Acoustic Insulation Foam
Physical Properties of Ethafoam 2222
Physical ProPerties Thickness Compressive strength 10% Compression 25% Compression Density Impact sound insulation Airborne sound insulation Thermal conductivity Dynamic stiffness Water vapour diffusion Ageing resistance Water absorption (after 24 hours) test Method EN12431 DIN 53577 UNits mm kN/m2 10 30 ISO 845 EN ISO 140-7 EN ISO 140-4 ISO8301 EN29052-1 ISO9052-1 EN12086 SP0414 ISO1798 DIN53428 years volume % 90 80 70 60 50 40 30 20 10 0
100 160 250 400 630 1000 16002500 4000+ 125 200 315 500 800 1250 2000 3150 5000+
ValUe 5
Kg/m3 LnT,w (dB) DnT,w + Ctr (dB) W/mK MN/m2
33 52 48 0.04 70 4000 50 0.5
Impact Sound Test Results
test Method UNits ValUe
Standardised impact sound pressure level, dB
Impact Sound Insulation
En ISO 140-7: 1998
LnT,w (dB)
52 *
* Criteria to pass test is < than 60 dB
0444
Sound Research Laboratories Limited Holbrook House, Little Waldingfield Sudbury, Suffolk CO10 OTH Test Report No. C/07/5L/3922/R03
Frequency, Hz
Specialty Materials Your Products Our Products Protect Telford Way Kettering NN16 8UN United Kingdom +44 1536 315700 Fax: +44 1536 410576 www.sealedair-emea.com
Corporate offices: Sealed Air Corporation, 200 Riverfront Boulevard, Elmwood Park, NJ 07407, USA Sealed Air has companies throughout the world. www.sealedair.com Sealed Air Corporation 2007. All rights reserved.
Reg. U.S. Pat. & TM Off. Sealed Air Corporation (US) 2006. All rights reserved. Printed in the U.S.A. The 9 Dot Logo and Sealed Air are registered trademarks of Sealed Air Corporation (US).
Our Products Protect Your Products