0% found this document useful (0 votes)
43 views1 page

2123 Sea 352 R Xe 00002 001 - 01 - Ifr - 2025 01 10 - 01

The document outlines the specifications and calculations for a hose reel system, including the weights and capacities of various hoses. It details the required lifting forces for both static and dynamic conditions, with specific values calculated based on the hose configurations. Additionally, it provides information on the hydraulic motor specifications and torque requirements for the system.

Uploaded by

Fagner Barreto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
43 views1 page

2123 Sea 352 R Xe 00002 001 - 01 - Ifr - 2025 01 10 - 01

The document outlines the specifications and calculations for a hose reel system, including the weights and capacities of various hoses. It details the required lifting forces for both static and dynamic conditions, with specific values calculated based on the hose configurations. Additionally, it provides information on the hydraulic motor specifications and torque requirements for the system.

Uploaded by

Fagner Barreto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

L3 = 0.8*pi*11.

735= 29 m
Total weight : 380 m oilfilled loading hose + MBC stored on reel : Approx. 119 tonnes
Hose capacity first layer : L2 = 5.4*pi*10,241= 178 m Total weight : 380 m empty loading hose + MBC + Camlock stored on reel : Approx. 71 tonnes

Hose capacity first layer : L1 =6,5*pi*8,747= 173 m


Required Lifting Force : 3633+2.5*3783+ Drag force 7000 kg = 20091 kg ( Static ) 7217

Dynamic amplification factor : 1.3


Required Lifting Force = 20091 * 1.3 = 26117 kg ( Dynamic )

SECTION A-A

QTY Length Mass in air Mass in air Underwater weight


Hose specification
empty with oil full of seawater
Trelleborg FS292 - Floating First Off 1 12,2 2100 3633 N.A.
Trelleborg MS202 - Floating Main Line Hose 27 12,2 2250 3783 N.A.
Trelleborg TS202 - Floating Tail Hose 1 12,2 2105 3638 N.A.
Trelleborg TS206 - Floating Tail Hose with extra buoancy 1 12,2 2155 3688 N.A.
Trelleborg RS305 - Floating Tanker Rail Hose 1 10,7 2063 3408 N.A.
Gall Thompson Marine Brake Away Coupling 1 1 1000 1126 N.A.
Camlock Coupling 1 1 500 626 N.A. Load Case 1 : 380 m 16" empty loading Hose stored on reel
Total Weight : Load Case 2 : 340 m oil filled hose stored on reel.
Design calculation
Description
Hose length Approx 380 meter
Pressure from HPU 250 bar at inlet of Hose Reel drive hydraulic motor
Hydraulic motor - Parker F 12 - 110 Parker F 12 - 110
Gear 3 stage planetary gear : Ratio 122
Net torque out of gear 40,7 kNm
Total torque on drum from 4 motors F12-110 motor and gears 1650 kNm
Radius from hose flange to center og Hose Reel 4,45 m
Available pull force in hose @ p= 250 bar into motor 1650/4,45 = 370 kN
Hose speed reel in / out 15 m / min
Rotational speed drum 15 m/min/ (pi*8,9) = 0,537
Oil consumption hydraulic motors Approx. 90 l/motor * 4 = approx 360 l / min @ dp motor = 250 bar
Scale: Projection: Weight:
Total weight of 380 meter empty hose, MBC and Camlock stored on reel 2100+27*2250+2105+2155+2063+1000+500= 70673 kg Ragngrid
This drawing and the design is the property of Seasystems AS
Total weight of 380 m oil filled hose , MBC and Camlock stored on reel 3633 +27*3783+3638+3688+3408+1126+626= 118 260 kg
and must not be disclosed to any third party without written permission.
Hose Reel Modified
Trident Field
Required Static Lifting force Hose Reel 3633+2.5*3783+ Drag force 7000 kg = 20091 kg
Drawing No.: Rev. No.: Sheet:
Dynamic amplification factor : 1,3 1.3 1 of 1
00 PGR 392436 00
Required lifting force - dynamic = 1,3*20,1 Approx. 26,1 tonnes = 256 kN REV DATE DESCRIPTION PREP. CHECK. APPR. Parent Drawing: A3

You might also like