INDUSTRIAL PAINTS FORMULATIONS ENCYCLOPEDIA - 1
ANTI RUST
BLACK
RAPID
PAINT PRIMER
FORMULATIONS
AND
PRODUCTIONS
E – TEXTBOOKS
SOLVERCHEM PUBLICATIONS
INDUSTRIAL PAINTS FORMULATIONS ENCYCLOPEDIA - 1
HARD BOOK E-BOOK
E – TEXTBOOK AUTHOR
YUSUF AKKAPILI
All rights of this publications belongs to
SOLVERCHEM PUBLICATIONS
INDEX
1 – ANTI RUST BLACK RAPID PAINT PRIMER
FORMULATION AND PRODUCTION PROCESS – 1
2 – ANTI RUST BLACK RAPID PAINT PRIMER
FORMULATION AND PRODUCTION PROCESS – 2
3 – ANTI RUST BLACK RAPID PAINT PRIMER
FORMULATION AND PRODUCTION PROCESS – 3
ANTI RUST
BLACK RAPID PAINT PRIMER
PRODUCTION PROCESS – 1
NO W/W
INGREDIENTS
1 RAPID ALKYD RESIN 27
2 TOLUENE 15.50
3 LONG OIL ALKYD RESIN 5
4 WETTING AGENT 0.30
5 BENTONITE 0.30
6 BLACK PIGMENT POWDER 3
7 CALCITE ( 5 – 10 MICRON ) 46
8 COBALT NAPHTHENATE ( % 7 ) 0.20
9 LEAD OCTOATE 0.40
10 METHYL ETHYL KETOXIME ( MEKO ) 0.20
11 ZINC PHOSPHATE 1
100
TOTAL KG
PROCESS: Charge toluene in the process tank. Start to mix at low
speed. Add long oil alkyd, wetting agent and rapid alkyd resin. Dissolve
alkyds in the toluene completely. Add bentonite and stirring at high
speed for five minutes. Add calcite and black pigment powder and mix
until crush in the mixture. Finally, add cobalt naphthenate, lead octoate
and methyl ethyl ketoxime while high speed mixing. Add zinc phosphate
and mix. Continue to mix until homogenous. Homogenous is enough,
process is completed.
** 1 **
ANTI RUST
BLACK RAPID PAINT PRIMER
PRODUCTION PROCESS – 2
NO W/W
INGREDIENTS
1 RAPID ALKYD RESIN 26
2 TOLUENE 15
3 LONG OIL ALKYD RESIN 5
4 WETTING AGENT 0.30
5 BENTONITE 0.30
6 BLACK PIGMENT POWDER 3
7 CALCITE ( 5 – 10 MICRON ) 48
8 COBALT NAPHTHENATE ( % 7 ) 0.20
9 LEAD OCTOATE 0.40
10 METHYL ETHYL KETOXIME ( MEKO ) 0.20
11 ZINC PHOSPHATE 1.60
100
TOTAL KG
PROCESS: Charge toluene in the process tank. Start to mix at low
speed. Add long oil alkyd, wetting agent and rapid alkyd resin. Dissolve
alkyds in the toluene completely. Add bentonite and stirring at high
speed for five minutes. Add calcite and black pigment powder and mix
until crush in the mixture. Finally, add cobalt naphthenate, lead octoate
and methyl ethyl ketoxime while high speed mixing. Add zinc phosphate
and mix well. Continue to mix until homogenous. Homogenous is
enough, process is completed.
** 2 **
ANTI RUST
BLACK RAPID PAINT PRIMER
PRODUCTION PROCESS – 3
NO W/W
INGREDIENTS
1 RAPID ALKYD RESIN 24
2 TOLUENE 15
3 LONG OIL ALKYD RESIN 5
4 WETTING AGENT 0.30
5 BENTONITE 0.30
6 BLACK PIGMENT POWDER 3
7 CALCITE ( 5 – 10 MICRON ) 50
8 COBALT NAPHTHENATE ( % 7 ) 0.20
9 LEAD OCTOATE 0.40
10 METHYL ETHYL KETOXIME ( MEKO ) 0.20
11 ZINC PHOSPHATE 1.60
100
TOTAL KG
PROCESS: Charge toluene in the process tank. Start to mix at low
speed. Add long oil alkyd, wetting agent and rapid alkyd resin. Dissolve
alkyds in the toluene completely. Add bentonite and stirring at high
speed for five minutes. Add calcite and black pigment powder and mix
until crush in the mixture. Finally, add cobalt naphthenate, lead octoate
and methyl ethyl ketoxime while high speed mixing. Add zinc phosphate
and mix well. Continue to mix until homogenous. Homogenous is
enough, process is completed.
** 3 **
