INDUSTRIAL PAINTS FORMULATIONS ENCYCLOPEDIA - 1
DARK BROWN
HAMMER
FINISH
METAL PAINT
FORMULATIONS
AND
PRODUCTIONS
E – TEXTBOOKS
SOLVERCHEM PUBLICATIONS
INDUSTRIAL PAINTS FORMULATIONS ENCYCLOPEDIA - 1
HARD BOOK E-BOOK
E – TEXTBOOK AUTHOR
YUSUF AKKAPILI
All rights of this publications belongs to
SOLVERCHEM PUBLICATIONS
INDEX
1 – DARK BROWN HAMMER FINISH METAL PAINT
FORMULATION AND PRODUCTION PROCESS – 1
2 – DARK BROWN HAMMER FINISH METAL PAINT
FORMULATION AND PRODUCTION PROCESS – 2
3 – DARK BROWN HAMMER FINISH METAL PAINT
FORMULATION AND PRODUCTION PROCESS – 3
DARK BROWN
HAMMER FINISH METAL PAINT
PRODUCTION PROCESS – 1
NO W/W
INGREDIENTS
1 STYRENE ACRYLIC BINDER 77.5
2 TOLUENE 16
3 BROWN PIGMENT POWDER 3
4 COBALT NAPHTHENATE 0.50
5 NON LEAFING ALUMINIUM PASTE 1
6 LEAD OCTOATE 0.50
7 METHYL ETHYL KETOXIME ( MEKO ) 0.20
8 CALCITE ( 3 MICRON ) 1.25
9 HAMMER SILICONE AGENT 0.050
100
TOTAL KG
PROCESS A: Charge 1, 2, 3, 4, 5, 6, 7, 8 ingredients in the process
tank. Start to mix. Continue to mix until homogenous. Then, add hammer
silicone slowly and carefully and mix well. Continue to mix until
homogenous. Homogenous is enough, process is completed.
NOTE: When hammer silicone is added it should always be given
carefully and in parts.
NOTE: Non leafing aluminium paste should be supplied from market
directly.
** 1 **
DARK BROWN
HAMMER FINISH METAL PAINT
PRODUCTION PROCESS – 2
NO W/W
INGREDIENTS
1 STYRENE ACRYLIC BINDER 76
2 TOLUENE 16.5
3 BROWN PIGMENT POWDER 3
4 COBALT NAPHTHENATE 0.50
5 NON LEAFING ALUMINIUM PASTE 1
6 LEAD OCTOATE 0.50
7 METHYL ETHYL KETOXIME ( MEKO ) 0.20
8 CALCITE ( 3 MICRON ) 2.25
9 HAMMER SILICONE AGENT 0.050
100
TOTAL KG
PROCESS A: Charge 1, 2, 3, 4, 5, 6, 7, 8 ingredients in the process
tank. Start to mix. Continue to mix until homogenous. Then, add hammer
silicone slowly and carefully and mix well. Continue to mix until
homogenous. Homogenous is enough, process is completed.
NOTE: When hammer silicone is added it should always be given
carefully and in parts.
NOTE: Non leafing aluminium paste should be supplied from market
directly.
** 2 **
DARK BROWN
HAMMER FINISH METAL PAINT
PRODUCTION PROCESS – 3
NO W/W
INGREDIENTS
1 STYRENE ACRYLIC BINDER 75
2 TOLUENE 17
3 BROWN PIGMENT POWDER 2.75
4 COBALT NAPHTHENATE 0.50
5 NON LEAFING ALUMINIUM PASTE 1
6 LEAD OCTOATE 0.50
7 METHYL ETHYL KETOXIME ( MEKO ) 0.20
8 CALCITE ( 3 MICRON ) 3
9 HAMMER SILICONE AGENT 0.050
100
TOTAL KG
PROCESS A: Charge 1, 2, 3, 4, 5, 6, 7, 8 ingredients in the process
tank. Start to mix. Continue to mix until homogenous. Then, add hammer
silicone slowly and carefully and mix well. Continue to mix until
homogenous. Homogenous is enough, process is completed.
NOTE: When hammer silicone is added it should always be given
carefully and in parts.
NOTE: Non leafing aluminium paste should be supplied from market
directly.
** 3 **
