Domestic technology Level indicators and level controllers Hydrostatic level indicator TankControl 10
Hydrostatic level indicator TankControl 10
Benefits
■ For fuel oil EL, L, diesel fuel, biodiesel and water
■ Universal application in tanks of up to a height of 3 m
■ Graphical indication of consumption and remaining range
■ With visual/audible alarms, Acknowledge button and 2 relays
■ No bearing charts required since all standard tank shapes are
stored
■ Easy operation due to device setup via menus
■ High measuring accuracy due to electronic sensor (pressure mea-
suring cell)
■ Remote measurements up to 15 m
■ Materials resistant to biofuel and biodiesel with max. 100 % FAME
■ Green fuels ready: suitable for use at tank facilities filed with the
new paraffinic fuels HVO or GTL
■ Watertight up to 10 m water column - ideal for use in flood hazard
areas
Application
Continuous level measurement with graphical display for indication of consumption (history), calculation of remaining range (forecast) and si-
gnalling of minimum or maximum levels as well as for level control. Suitable for fuel oil EL, L (DIN 51603-1), diesel fuel (EN 590), water (no drin-
king water!), liquid fuels as per DIN SPEC 51603-6 and DIN/TS 51603-8 as wells as biofuel and biodiesel with up to 100 % FAME (EN 14214).
This product is therefore ideal for all ecologically upgraded fuel oil consuming systems that use the new paraffinic fuels HVO or GTL as an ad-
mixture or 100 %.
For tanks from 1,000 to 4,000 mm liquid level.
In conjunction with an additional submersible probe for differential alarm also suitable for detecting level differences in communicating tanks
(e.g. battery tanks) which may cause overfilling. It is also possible to connect a floating probe for backflow alarms (drain system, e.g. for rain wa-
ter harvesting systems) or for additional minimum or maximum alarms. Suitable for use in flood hazard areas and flood risk areas.
Versions
Part no.
Level indicator TankControl 10 52151
Blue part no. = in-stock items
Description
The hydrostatic level indicator consists of a control unit with numerical and graphical display and a submersible probe with integrated pressure
measuring cell. Optionally with additional submersible probe for differential alarm or with floating probe. The system displays either litres, m3, %
or liquid level (mm). When the level falls below or exceeds an adjustable minimum or maximum value, the control unit triggers visual and audib-
le (can be acknowledged) alarms. The value for submersible probe 2 is displayed in mm. If an adjustable level difference between submersible
probe 1 and submersible probe 2 is exceeded, an alarm is triggered. Two additional relay contacts with selectable switching points are available
for external alarm devices, for level control or for connection to telecommunication or building control systems. Easy operation due to device set-
up via menus. High measuring accuracy due to electronic sensing. Standard tank shapes are stored. Watertight up to 10 m water column.
1/2 www.afriso.com
Domestic technology Level indicators and level controllers Hydrostatic level indicator TankControl 10
Technical specifications
Functions Supply voltage
Units switching, AC 230 V
Daily storage of level data, Lithium battery for data backup (calendar function)
Consumption monitoring,
Switching output
Graphical evaluation of consumption values (up to 5 years),
Relay contact: 2 voltage-free changeover contacts
Calculation of remaining range,
Contact rating: Max. AC 250 V, 2 A
Alarm functions (min./max.),
Sensor error and short circuit alarm Visual indication
LED red: Alarm
Measuring range
0/400 mbar Audible alarm
Integrated piezo-buzzer, can be acknowledged
Measuring accuracy Min. 70 dB(A)
± 1.5 % FSO
Housing
Operating temperature range Wall mounting hou-
Medium: -5/+70 °C
sing made of im-
Ambient: 0/45 °C
pact-resistant plastic
Storage: -5/+70 °C
(PC/ABS)
Display W x H x D: 100 x 188 x 65 mm
High-resolution, backlit graphical display (30 x 50 mm). indication Degree of protection: IP 54 (EN 60529)
of either litres (6 digits), m3, % or liquid level in mm. Symbols for
Scope of delivery
alarm functions.
■ Control unit with graphical display and 15 m connection cable to
Submersible probe the probe (cannot be extended)
L x ⌀: 53 x 24 mm ■ Submersible probe with 6 m submersible cable
Housing: Stainless steel 304 ■ Moisture-proof junction box (IP 54)
Cable: PVC, 6 m with atmospheric reference hose ■ Screw connector kit G1 x G1½ x G2
Diaphragm: Stainless steel 316 L ■ Mounting kit for withdrawal flange at plastic battery tanks
Seals: FKM (Viton)
Option
Spacer: POM, PE
■ Submersible probe for differential alarm
Degree of protection: IP 68 (EN 60529)
■ Floating probe (spare probe Minimelder)
2/2 www.afriso.com
