Supplier Name: PT.

Hasakona Binacipta
Purchase Order Title: HAZARDOUS & NON HAZARDOUS INCINERATOR
Equipment Tag Number(s): 188-V-31001 & 189-V-31001 AB
Supplier (Internal) Document No: -

CSTS Document No: 870310-S-1198019-MEC-C01-0001

Company Project Document Number

Project
PO Number SDR Code Seq. No
Code
TEP - 1198019 - C01 - 0001
PIPING AND INSTRUMENTATION DIAGRAM
DOCUMENT TITLE:
(P&ID) for HWI
DOCUMENT REVIEW STATUS
CODE: A B C D E
NAME:
SIGNATURE:
DATE:
Review Legend
Document is accepted as Final. Supplier shall proceed with manufacture. Any changes to the document shall require resubmission
CODE A
to Company.
Signifies general acceptance of both quality and content of the document but with minor points to be amended by Supplier.
CODE B Providing that the comments are incorporated, Supplier may continue with manufacture pending full acceptance. A revised copy
shall be returned for final acceptance.
The quality and content are considered by Company to be non-compliant and/or unfit for purpose. Such documents shall be
CODE C reviewed by Supplier to take note of the reasons for rejection and revise them accordingly. The revised document(s) shall then be
resubmitted.
Document has been cancelled or voided and does not need to be progressed further. No further action required at time of
CODE D
submission
Signifies that prior Company approval is not required and the documents will be incorporated into the EDMS “as is”. Individual
Code E documents given Code 4 status may be required to be included in a data manual, which will be subject to a collective review and
subject at that time to Company approval. No further action required at time of submission.

Comments Summary

Issue Record

Z03 Z03 24-Jan-2023 F- As Built Irfan Maurico Andhika

Z02 Z02 01-Jul-2021 F- As Built Arie Maurico Andhika
Z01 Z01 28-Sep-2020 F- As Built Arie Maurico Andhika
10 12 18-Aug-2020 R - Submit for Review Arie Maurico Andhika
Company Supp
Date Reason for Issue Prepared Checked Approved
Rev No Rev
The document consists of this front sheet plus 5 pages.
Tangguh Expansion Project – LNG EPC
Piping and Instrumentation Diagram (P&ID) for HWI

Revision History
Amendment Date Revision Amender Name Amendment
Number
25-Jun-2020 09 Arie R - Submit for Review
18-Aug-2020 10 Arie R - Submit for Review
28-Sep-2020 Z01 Arie F - As Built
01-Jun-2020 Z02 Arie F - As Built
24-Jan-2023 Z03 Irfan F – As Built

Related Documents
Document Document name Description of Content
number

TEP-1198019-C01-0001 Page 2 of 6 Rev: Z03

870310-S-1198019-MEC-C01-0001 BP Internal
 Tag Number 188-VP-31001-03
UC USED AMINE FEEDING
Service

188-AM-36046-1"-1CH2E3-NI
33088 XA PUMP
33088B AH UC UC UC
PLC
XA PROGRESSIVE CAVITY
LI
188-VPM-31001-06 XI 188-AM-36035-2"-1CH2E3-NI 33010 33010
33025 33024 33065 Type PUMP
AL UC UC UC UC
TYPE-1 33088A PLC
PLC
HV 36091
33010 33082 33016 33074 Design Capacity L/hr 40
1''
10.4
1" D 2" NC PLC
UC
US
HV 36100
Normal Capacity L/hr 40
33051 LO 2 '' 33010 33010 188-VPM-31001-03 XI XA
33088 SRD
RADAR PLC

FREE DRAINING
33031A 33031B
PLC
33067
TYPE-1
Motor Tag No 188-VPM-31001-03

2" x 1"
PLC
L61
HV 36000 20 70 20 70 P13
2'' 29
VSTR 36136
RS
2''x2 12"
MIN
RS 29 LO 2 ''
L1
3"
Rated Voltage VAC 380
2" 1.34 2 21'' 10.4 188-FAR-38028 US
NOTE 10,11 2" 2" 2" HV 36002
2" x 1'' N1 188-GF-36030-2"-1CS2P3-NI 33031
2" x 1'' 3/4'' HV 36052
188-VP-31001-06 HV 36001
2''
24" NOTE 8 PLC Rated Power kW 0.55
188-AM-36000-2"-1CH2E3-NI 3/4''
NC
HV 36065 L61
3'' N4
HV 36142 1'' 1''
NC DOWN PIPE WITH 188-AM-36032-2"-1CH2E3-NI
NC NOTE 4 SRD 3.5
SYPHON BREAKER
188-AM-36002-2"-1CH2E3-NI 33052 1" D 2"
NOTE 6 RADAR Tag Number 188-VP-31001-01

FREE DRAINING
188-VTK-31001-03 33070 188-AM-36043-1"-1CH2E3-NI
188-AM-36058-1"-1CH2E3-NI

1/2" x 1"
2" x 1"
US US STILLING WELL NOTE 14
STILLING WELL
33031 33088 20 70 P13 USED OIL FEEDING
2''
HV 36005 2" x 1"
29
VSTR 36064
RS RS
20
29
70 1/2" x 3/4"
Service PUMP
PLC
3.5 3.5

HV 36146
2" LO 1"1" 1/2"
LOCAL CATCH BASIN N2 1/2"
PROGRESSIVE CAVITY

3/4"

LO
1"
NC 1"
HV 36004
3/4''
HV 36093
188-VP-31001-03 NC HV 36073
NC Type PUMP
AHH N3
LI HV 36006
1/2" 188-AM-36003-1/2"-1CH2E3-NI 188-AM-36069-3/4"-1CH2E3-NI
188-AM-36026-1"-1CH2E3-NI L/hr 40
UC 33095
ALL
HV 36003
Design Capacity
33099 PLC 2" NC 188-AM-36019-1"-1CH2E3-NI

CHV 36038
Note 4

3/4"
PLC
Note 9 Normal Capacity L/hr 40
Note 11 UC UC UC
XA XI 188-VPM-31001-04 188-OM-36036-2"-1CS2P3-NI
XA 33024 33065 33074
33099B 33099A TYPE-1 HV 36090 Motor Tag No 188-VPM-31001-01
1''
33009 UC UC UC UC
PLC PLC NC NC 3/4"
33009 33082 33016 33025
10.4
PLC HV 36149 Rated Voltage VAC 380
1" D 2"
US AH
LI UC
33099 188-OM-36047-1"-1CS2P3-NI 0.55
SRD
33053 33009 33009 33009 188-VPM-31001-01 XI XA Rated Power kW
AL

FREE DRAINING
PLC
188-OM-36006-2"-1CS2P3-NI RADAR PLC PLC TYPE-1 33032A 33032B LOCAL CATCH
33068 HV 36083
BASIN

2" x 1"
PLC PLC
LO 2 '' MOTOR TYPE-1
20 70
188-VP-31001-02
20 70 P13
2''
HV 36007
29
VSTR 36053
RS
2''x2 12"
MIN
RS
2'' 29 LO 2'' L61
188-FAR-38029
Tag Number (NOTE 13)
US COMMON AUTO/MAN START STOP
NOTE 10,11 2'' 1.34 2" 2 21'' 2" 10.4 HV 36009 ALARM SELECTOR COMMAND COMMAND

1CS2P3 1CH2E3
2" x 1''
HV 36092 2" x 1'' 3" L1 188-GF-36031-2"-1CS2P3-NI 33032 HYDROCARBON
3/4'' 2'' N1 SLUDGE FEEDING
3/4''
188-VP-31001-04 NOTE 4 NC
L61 24" PLC Service XA HS HS HS
HV 36143 1'' 3'' N4 PUMP ZZZZZA ZZZZZC ZZZZZA ZZZZZB
188-OM-36004-2"-1CS2P3-NI 188-OM-36033-2"-1CS2P3-NI SRD

CHV 36033
HV 36008
NC NC 1''
HV 36066 DOWN PIPE WITH 3.5
3/4" PROGRESSIVE CAVITY PLC PLC PLC PLC
188-OM-36059-1"-1CS2P3-NI NOTE 6 SYPHON BREAKER 33054 1" D 2" Type PUMP
RADAR

FREE DRAINING
UC
188-OM-36044-1"-1CS2P3-NI

HV 36147
US US 2" x 1" 33071
STILLING WELL STILLING WELL
L/hr 160

1/2" x 1"
YYYYY

3/4"

LO
LOCAL CATCH BASIN 33032 33099 NOTE 14 Design Capacity
188-VTK-31001-01 2 x 1" 20 70 VSTR 36141
P13 20 70 1/2" x 3/4" LOCAL/
PLC
2'' LO 2" 29 RS RS 29 START
COMMAND REMOTE
N2 HV 36012 3.5 1"
1" 1/2" 1/2" 3.5 Normal Capacity L/hr 160
AHH XI XI XS XS
LI NC 1" 3/4''
HV 36094 HV 36074
1"
NC 188-OM-36070-3/4"-1CS2P3-NI ZZZZZA ZZZZZD ZZZZZA ZZZZZB
33096
HV 36011
188-VP-31001-01 NC 188-OM-36007-1/2"-1CS2P3-NI 188-VPM-31001-02

START
Motor Tag No PLC PLC PLC PLC

STOP
ALL N3 188-OM-36027-1"-1CS2P3-NI 1/2"
PLC HV 36010
HV 36013

NC 2" US
Note 4
Rated Voltage VAC 380 MCC
Note 9 188-OM-36073-1"-1CS2P3-NI XXXXX XS-ZZZZZC

Note 11 O
H A LOC/REM
Rated Power kW 0.55 SELECTOR
HS START
HS STOP
Tag Number 188-VP-31001-06

AMINE FILLING PUMP

Service
UC
PROGRESSIVE CAVITY Z03 24.JAN.23 F - AS BUILT IRFAN MAURICO ANDHIKA
33034
Type PUMP
PLC US US
33050 33034 Z02 01.JUL.21 F - AS BUILT ARIE MAURICO ANDHIKA
188-VYM-31001-04 Design Capacity L/hr 1600
XI XA
US
UC TYPE-1 33034A 33034B Z01 28.SEP.20 F - AS BUILT ARIE MAURICO ANDHIKA
189-WU-36108-2"-1CS1W3-NI
20
29
70
188-WU-36020-2"-1CS1W3-NI PLC
33083
Normal Capacity L/hr 1600
33050 UC UC UC
3.5 US
PLC
188-SL-36037-2"-1CS2P3-NI 33024 33065 33074 10 18.AUG.20 R - SUBMIT FOR REVIEW ARIE MAURICO ANDHIKA
188-VPM-31001-05 US 33040
Motor Tag No 188-VPM-31001-06
XA XI UC UC UC UC
HV 36126 33034 US US US US
33050B 33050A TYPE-1 1'' 33064 33082 33016 33025
PLC PLC
NC 6.7
PLC
33083 33050 33223 33123
PLC
Rated Voltage VAC 380
1" D 2"
PLC
188-VPM-31001-02 XI XA
US
188-SL-36048-2"-1CS2P3-NI 33055
AHH
LI Rated Power kW 0.75
SRD TYPE-1 33083A 33083B
FREE DRAINING

33050 188-SL-36009-2"-1CS2P3-NI 33011

2" x 1"

33011
188-SL-36008-2"-1CS2P3-NI 33069 HV 36081
ALL PLC PLC
PLC RADAR PLC
2'' REFERENCE
2'' x 2 21'' LO
2"
HV 36014 NOTE 5 20
29
70
RS MIN RS 2'' 20
29
70 P13
LO 2" L61 US Tag Number 188-VP-31001-05 DRAWINGS
3.5 1 6.7 L1 33083
NOTE 10,11 2" 2 2'' 2'' HV 36018 3"

2" x 1'' 2" x 1'' HV 36145 2" N1 PLC HYDROCARBON

2"
HV 36015 188-VP-31001-05 NC
3/4''
HV 36016
NC L61
2"
NOTE 8 188-SL-36034-2"-1CS2P3-NI Service SLUDGE FILLING PUMP DWG NO. TITLE
1''
1" NC HV 36144 2'' x 1'' 3'' N4 SRD 3.5
NC
AH LI 33056 1" D 2" PROGRESSIVE CAVITY ALL RIGHT RESERVED

188-SL-36028-1"-1CS2P3-NI AL 33064 188-SL-36011-1"-1CS2P3-NI Type PUMP

188-WU-36022-1"-1CS1W3-NI 188-VY-31001-04 STILLING WELL 188-SL-36045-1"-1CS2P3-NI

FREE DRAINING
HV 36067 1"
NC
20 70 PLC RADAR 33072
29 STILLING WELL
N2
NOTE 14 Design Capacity L/hr 1600 TANGGUH EXPANSION PROJECT
3.5 20 70 2'' x 1 1
4''
P13 20 70
LOCAL CATCH BASIN Note 7 LO 2" 29 RS
RS 1" 29 1"
UC 2''
HV 36020
3.5 2" 1 1
4''
1''
1"
LO 3.5 CHV 37052 3/4" HV 36175 Normal Capacity L/hr 1600
33064 HV 36069
HV 36148
NC
1"
NC 2"
PLC 188-VTK-31001-02 HV 36021 188-VP-31001-02 NC
N3 188-SL-36010-2"-1CS2P3-NI NC HV 36022 3/4'' x 1''
188-VPM-31001-05
2'' x 1'' 1/2" Motor Tag No
NC
2" HV 36019
NOTE 4
188-SL-36056-1"-1CS2P3-NI Rated Voltage VAC 380

LOCAL CATCH BASIN 0.75

Rated Power kW

Tag Number 188-VYM-31001-04 Tag Number 188-VP-31001-04

PT. HASAKONA BINACIPTA
MIXER HYDROCARBON USED OIL FILLING
Tag Number 188-VTK-31001-01
Service SLUDGE TANK Service PUMP
USED OIL WASTE PROGRESSIVE CAVITY
Service TANK Rated Voltage VAC 380 Type PUMP

Size (IDxH) mm Ø1238 x 2000

Working Capacity m³ 2.05
Rated Power kW 22 Design Capacity L/hr 1600
PIPING AND INSTRUMENTATION DIAGRAM (P&ID) for
Design Capacity m³ 2.4 Normal Capacity L/hr 1600 HWI
Motor Tag No 188-VPM-31001-04 SHEET 1 OF 4
Tag Number 188-VTK-31001-03 Tag Number 188-VTK-31001-02
Rated Voltage VAC 380
AMINE WASTE SLUDGE WASTE
Service TANK Service TANK
PURCHASE ORDER NO : @BP p.l.c. SCALE
Rated Power kW 0.75 SECURITY CLASSIFICATION:
Size (IDxH) mm Ø1238 x 2000 Size (IDxH) mm Ø1588 x 2560 1198019 BP INTERNAL
NTS
Working Capacity m³ 2.05 Working Capacity m³ 4.05 COMPANY DRAWING NO. CORE SIZE REV.

Design Capacity m³ 2.4 Design Capacity m³ 5 TEP-1198019-C01-0001 NON CORE A3 Z03

SUPPLIER NUMBER CSTS NUMBER

51214 870310-S-1198019-MEC-C01-0001
 GENERAL NOTES : GENERAL NOTES : GENERAL NOTES :
BURNER DETAIL
188-VBU-31001-01/02
188-VBU-31001-03/04
23.COMPRESSED AIR WILL BE USED TO COOLING DOWN THE WASTE INLET 11. OPERATOR SHALL STANDBY NEARBY DURING DIESEL FUEL FILLING 1. EFFLUENT COMPRESS AIR FLOW IS INTERMITTENT TO PRIMARY COMBUSTION
Ignition unit PIPE TO PRIMARY COMBUSTION CHAMBER. 12.LOCAL LEVEL INDICATOR AND TO BE INSTALLED NEAR TANK AND DIESEL CHAMBER, IT WILL OPEN WHEN THERE IS NO INPUT WASTE FOR COOLING, IT
24. ALL TAG NUMBERS ON THIS P&ID WILL BE PREFIXED BY 188 UNLESS FUEL TRUCK WILL CLOSE DURING NORMAL OPERATION.
Light Sensor
OTHERWISE INDICATED. 13. TO SAFE LOCATION 2. EMERGENCY STACK IS USED FOR EMERGENCY CONDITION WHEN THE SYSTEM IS
25.SOLENOID VALVES ARE INTEGRATED IN ONE BODY. 14. CONNECTING WILL USE EXISTING HOSE DIESEL TRUCK TOP SHUT DOWN, EMERGENCY STACK WILL BE OPENED BY PNEUMATIC SYSTEM
26. TUBING WILL BE SUPPLIED BY EMERGENCY DAMPER PNEUMATIC SYSTEM CONNECTION TYPE 2" CAMLOCK FEMALE WITH PLUG WILL PROVIDE BY 3. LOCATED ABOVE CURB AREA
SUPPLIER. PACKAGE 4. 188-VBU-31001-01
DIESEL FUEL
27.USING FLEXIBLE HOSE 15. COCK VALVE ON FUEL OIL RETURN LINE OF BURNER IS LOCKED OPEN 188-VBU-31001-02
RETURN LINE
28.WILL BE PLACED IN SAFE LOCATION (UNDER SHELTER) POSITION 188-VBU-31001-03
MOTOR BURNER 01/02
M
MOTOR BURNER 03/04 29.MOTOR RUN, AVAILABLE, AND TRIP STATUS SIGNAL IS CONNECTED TO 16.BURNER DIRECTLY MOUNTED TO COMBUSTION CHAMBER 188-VBU-31001-04
Alarm PLC WITH SIMOCODE USING PROFINET CABLE. 17.DAMPER VALVE WILL BE SET DURING COMMISSIONING AND WILL BE 5. SOLID WASTE LIKE OILY RAG / ABSORBENT GLOVES TO BE DIRECTLY INPUT
BLOWER BURNER 01/02
BLOWER BURNER 03/04 30.FILTER WILL BE SUPPLIED TO ACHIEVE AIR REQUIREMENT CONDITION LOCKED OPEN INCINERATOR FORM MANHOLE ( MANUALLY )
18. SURROUNDING HAND RAIL BARRICADES IN LIEU OF PERSONAL 6. DAMPER WORKING FOR SETTING THE LARGE AIR AMONG TO SUCCEED THE BEST
US US US PROTECTION FOR ROTATING KILN EMISSION
33032 33031 33083
US US US US 19.MECHANICAL PROTECTION SURROUNDING THE SEAL TO PREVENT GAS 7. LOOSE PART BLIND PLATE
33034 33041 33043 33031 LEAK 8. AT HIGHEST POINT
US US US
US US US US 20. VSD WILL BE PROVIDED TO ADJUST PRIMARY COMBUSTION CHAMBER 9. AT LOWEST POINT
33066 33077 33075 NOTE 21 Tag Number 188-VBU-31001-01
33033 33038 33066 33032 MOTOR SPEED MANUALLY WHEN COMMISSIONING 10.HIGH LEVEL ALARM LOCATED CLOSED TO THE DIESEL TANK AND DIESEL FUEL
HS
US US US US 33091 21.EMERGENCY PUSH BUTTON 188-HS-33091 WILL TRIP ALL MOTOR TRUCK
US US US US Service BURNER PCC 1
33100 33098 33076 33038 (EXCEPT ALL WATER PUMPS), OPEN SOLENOID VALVES, AND EMERGENCY
NOTE 10 & 11 33077 33083 33045 33100
PLC
Type Max.P45 AB DAMPER
LI US US US US 22.THE FORCE DRAFT FAN WITH AIR INTAKE SYSTEM:
33012 33012 MOTOR TYPE-3 COMMON AUTO/MAIN START STOP
CHV 36025 HV 36026 20 70 PLC
ALL
RADAR
Note 13 33039 33075 33076 33098 - SUCTION STACK AT LEAST 3 METER HEIGHT ABOVE GROUND LEVEL. ALARM SELECTOR COMMAND COMMAND
NOTE 14 29 188-FAR-38030 Tag Number 188-VBU-31001-02 - INSECT SCREEN ON THE TOP OF SUCTION NOZZLE. XA HS HS HS
2'' 2" 2" 3.5 6" x 8'' FI ZZZZZA ZZZZZC ZZZZZA ZZZZZB
HV 36023
3/4"
NC 188-GF-36029-6"-1CS2P3-NI 33027
Service BURNER PCC 2 PLC PLC PLC PLC
188-FD-36012-2"-1CS2P3-NI L61
XA
N1 33024 UC
2"
3" MH 24" N4 NOTE 10 LIT RADAR Type Max.P45 AB YYYYY
6" 3" 33024 AHH
L2A LI
L11
UC NOTE 8 RUN AVAILABLE TRIPPED START LOCAL/ SPEED SPEED
STILLING WELL 33024 AL 33024 STATUS STATUS STATUS COMMAND REMOTE REFERENCE FEEDBACK

33023 188-VTK-31001-05 NOTE 12 PLC HV 36070 1"

NC XI XI XA XI XI XX SI XS XS
L2B 2"
L11 STILLING WELL 2" ZZZZZA ZZZZZB ZZZZZB ZZZZZC ZZZZZD ZZZZZ ZZZZZ ZZZZZA ZZZZZB
N2 LO 188-FD-36013-1"-1CS2P3-NI HV 36071 MIN 5D MIN 3D

START
PLC PLC PLC PLC PLC PLC PLC PLC PLC

STOP
2 x 1"
DRAIN
2"
HV 36028 1" Tag Number 188-VBU-31001-03
N3 NC HV 36027 NC
TRIP COMMAND
NOTE 3 NOTE 9
US
Service BURNER SCC 1 MCC
XXXXX XS-ZZZZZC
HV 36029

1" LO Type Max.P35 AB H

O
A LOC/REM
1" LO UC UC SELECTOR
NC AHH 1" HV 36030
Note 1 UC UC UC UC HV 36176 NC 33025 33065 ZLO ZLC HS START
TI US US US US
20 70 33064 33016 33025 33065 33025 33026
188-GU-36038-3/4"-1CS2U3-NI

HV 36177 HS STOP
HV 36894
3/4"
NC 29 33017 US 1" UC UC 33066 33077 33075 33083 Tag Number 188-VBU-31001-04
20 70
US 3.5 UC UC UC UC UC PLC
33038 29 33024 33074
AH
MOTOR TYPE-1 MOTOR TYPE-2

188-FD-36024-1"-1CS2P3-NI
UC US US US US
33098 33082 33010 33009 33024 33074 TI 3.5 33025 Service BURNER SCC 2 COMMON AUTO/MAN START STOP
US US US
UC UC UC
33100 33098 33076 33031 (NOTE 29) ALARM SELECTOR COMMAND COMMAND
PLC 33016
33076 S 3/4" PLC AL
33032 33031 33083
33010 33009 33064 PLC
XA HS HS HS
1" x 3/4"
XI XA
PLC
ZSO ZSC US US US US Type Max.P35 AB ZZZZZA ZZZZZC ZZZZZA ZZZZZB
UC UC
CHV 36034

3/4"
3/4" x 3/8" US US US 33025 33026 33039 33033 33045 33032 CLOSED TRIPPED START STOP
3/4" S 33098 TYPE-2 33066A 33066B UC
33016
TE
33017
33016 33082 XA
PLC PLC PLC PLC
STATUS STATUS COMMAND
Note 27
PLC
33066 33077 33075 PLC
US 3/4" 20
1000
1300
188-VBUM-31001-01 PLC 33077B
20 1000
Tag Number 188-VZC-31001-01 UC UC XI XI XA
188-VBUM-31001-02
CHV 36035

33076 3.5 US US US XI 900 YYYYY

US PRIMARY COMBUSTION YYYYY ZZZZZA ZZZZZB ZZZZZB
TE 33100 33098 33076 3.5
PLC
188-VBU-31001-01 33066 33016 TYPE-2 33077A
Note 7
Service CHAMBER START LOCAL/ PLC PLC
Note 16

REMOTE
Note 4&15 PLC US US US 1" x 3/4" PLC AH COMMAND
UC TI
HV 36068

3/4" x 3/8" 33018 33018 Size (IDxL) mm 1722 x 6124 XI XI XS XS

3/4"
T26 T26
33033 33039 33045 AL ZZZZZA ZZZZZD ZZZZZA ZZZZZB TRIP COMMAND
LO N5A
N81 1/2" N8 Note 27 US PLC PLC
Note 18 PLC
(kg/cm2.g) ATM+FV US

START
1 1/2"
33077 PLC PLC PLC PLC

STOP
N7Note 23 20 1300 188-VBU-31001-02 N5 Design Pressure MCC
3/4"x2"
3/4"x2" 1000 TE XXXXX XS-ZZZZZC
PLC
T26
33018 US US US
RS N2 N5B 3.5 Note 16 188-VZC-31001-02
1 1/2"
33032 33031 33083 Design Temperature US
MCC
1 1/2"
TE 1400 / 170 XXXXX XS-ZZZZZC
RS Note 4&15 T26
33019 Refactory / Casing Steel Kiln °C HS START
N1
N4
188-VZC-31001-01 Note 5
N5 US US US O
1"x 2" N6B H A LOC/REM
20
PEEP HOLE
70
33066 33077 33075 Working Capacity m³ 11.2 SELECTOR
HS STOP
31 N3 ZS 10" HS START
3.5 33082 US US US US
US US US N7 N6A
33038 33100 33098 33076 HS STOP
Note 19 20 1000 Tag Number 188-VZC31001-02
33032 33031 33083 UC UC UC Note 19 800 20 1300
UC 1200 AHH
US US US
33016 33082 33025 3.5 Note 7 TI SECONDARY
US US US UC Note 7 33082 3.5 33019 Service
PLC
33039 33033 33045 COMBUSTION CHAMBER
33066 33077 33075 33082 PLC PLC
US US US XA PLC

Note 16
PLC Size (IDxH) mm 1910 x 5484 Z03 24.JAN.23 F - AS BUILT IRFAN MAURICO ANDHIKA
US US US 33032 33031 33083 33037B
XA XI 188-VKEM-31001-01 20 1000
XI Note 20
500
33100 33098 33076 33033B 33033A US US US 3.5
US US US 188-VBU-31001-03 Design Pressure (kg/cm2.g) ATM+FV
PLC
TYPE-1 33037A TYPE-3 188-VYM-31001-03 33032 33031 33083 70
Z02 01.JUL.21 F - AS BUILT ARIE MAURICO ANDHIKA 6
US US US 33066 33077 33075 PLC 29 LO 1"

33039 33038 33045 UC Design Temperature

US US US
US US US NOTE 4&15 Note 27 3.5 1400 / 60
PLC
US 33036
33066 33077 33075
3/8" x 3/4" 3/4" x 1"
20
HV 36031 Refactory / Casing Steel °C Z01 28.SEP.20 F - AS BUILT ARIE MAURICO ANDHIKA
US US 33100 33098 33076 33037 PLC
XA

33033 33033 PLC

PLC 33036B
US US US Working Capacity m³ 7.1
PLC NOTE 7 US US 188 188-VYM-31001-01
1"
NC 10 18.AUG.20 R - SUBMIT FOR REVIEW ARIE MAURICO ANDHIKA
-VY XI 33100 33098 33076 HV 36178
LO 20 70 RS 33038 33037 -31 UC UC UC
Note 16

31 001 TYPE-1 33036A

Tag Number
3.5 HV 36036 -02 PLC
US US US 33009 33064 33025 188-VTK-31001-05
NOTE 6,17,22 188-VKE-31001-01 188-GA-36051-6"-1CS2U3-NI 33038 33033 33045 UC UC UC UC UC
188-VY-31001-01 DIESEL FUEL TANK
Note 26
Note 26

PLC UC UC 33024 33018 33010 33065 33074 Service

US
US
UC
33039 33016 33025 PLC
33035 33036 Size (IDxL) 1900 x 3430
PLC 188-VBUM-31001-03 XA (head to head ) mm 280/280

188-FD-36053-1"-1CS2P3-NI
PLC PLC
XA XI
XI XA TYPE-1 TYPE-2 33075B REFERENCE
33039B 33039A
Design Pressure (kg/cm2.g) 0.0714 + Full of Liquid DRAWINGS
188-VYM-31001-02 TYPE-1 33035A 33035B
PLC 188-VKEM-31001-02 XI
PLC 33075A
US US Design Temperature °C 100
33039 33075 PLC
DWG NO. TITLE
PLC Working Capacity m³ 10
US 20 70 Note 7 PLC
31 RS 20 70
33035 Design Capacity m³ 12
3.5 31
HV 36037
PLC 3.5
Ash Bin NOTE 6,17,22
188-GA-36052-6"-1CS2U3-NI 188-VKE-31001-02 TANGGUH EXPANSION PROJECT
Tag Number 188-VY-31001-02
NOTE 4&15 188-FD-36054-1"-1CS2P3-NI
20 1300
20 70
1200 29
HV 36032 Service SCREW CONVEYOR 2
188-GU-36005-2"-1CG1U3-NI 3.5 Note 27 3.5 LO
33048 1"
188-VBU-31001-04 3/8" x 3/4" 3/4" x 1"
NC
1"
Motor Tag Number 188-VY-31001-02
TO SAFE PLC
BY PNEUMATIC SYSTEM

HV 36179
188-GU-36063-2"-1CG1U3-NI

ATMOSPHERE UC UC UC UC UC
33024 33018 33010 33009 33064 Rated Power kW 2.2
33048
VENDOR

PLC
UC UC UC
HV 36017

Rated Voltage VAC 380

2"
S TO SAFE
188-VBUM-31001-04 XA 33025 33065 33074
ATMOSPHERE
188-GU-36039-3/4"-1CG1U3-NI 3/4" x 2" 3/4" x 1/2" TYPE-2 33100B
PCV FAILURE
XI Tag Number 188-VY-31001-01
33038 33038 0.56
COMPRESSOR 33059 1" x 2" 33100A
OVERPRESSURE PLC US
PLC Service SCREW CONVEYOR 1 PT. HASAKONA BINACIPTA
10 S 33100
1/2" x 1/2" 188-GU-36074-3/4"-1CG1U3-NI 3/4" x 1/2" 33002
0.51 SRD PLC
NOTE 25 kg/cm².g MIN Motor Tag Number 188-VY-31001-01
COMPRESSOR
3/4" x 1"
OVERPRESSURE
10.2 Rated Power kW 2.2
1/2" x 1/2"
3/4"
188-GU-36057-3/4"-1CG1U3-NI

Air Inlet
Rated Voltage VAC 380 PIPING AND INSTRUMENTATION DIAGRAM (P&ID) for
188-VC-31001-01 HWI
BY COMPRESSOR

Note 28
Tag Number 188-VKE-31001-01 Tag Number 188-VKE-31001-02
VENDOR

188-VCM-31001-01 XI
33097 Service
BLOWER (FDF PCC )
Service BLOWER (FDF SCC ) SHEET 2 OF 4
TYPE-1

Type CENTRIFUGAL FAN Type CENTRIFUGAL FAN

NOTE 30 Normal Capacity m3/h 1250.73 Normal Capacity m3/h 64.84 PURCHASE ORDER NO : @BP p.l.c. SCALE
SECURITY CLASSIFICATION:
188-GU-36075-3/4"-1CG1U3-NI
1800 Design Capacity m³/hr 1800
1198019 BP INTERNAL
NTS
Design Capacity m³/h
COMPANY DRAWING NO. CORE SIZE REV.

TEP-1198019-C01-0001 NON CORE A3 Z03

SUPPLIER NUMBER CSTS NUMBER

51214 870310-S-1198019-MEC-C01-0001
 GENERAL NOTES :
Tag Number 188-VDV-31001-01
1. FRESH WATER SUPPLY TO WATER TANK
Service WATER QUENCHER 2. WATER TANK SUPPLY TO WATER QUENCHER, SOLUTION TANK, AND DAILY TANK.
3. WATER TANK SUPPLY TO SLUDGE TANK WHEN REQUIRED.
Size (ID x H) mm Ø2250 x 4005
4. DELETED
5. LOCATED ABOVE CURB AREA.
Tag Number 188-VDV-31001-02 6. DELETED.
Service DRY SCRUBBER 7. NaOH WILL BE SUPPLIED MANUALLY VIA 2" BLINDED NOZZLE PERIODICALLY MAXIMUM
ONCE A WEEK.
Size (ID x H) mm Ø2200 x 3980 8. VALVE INTERLOCK SYSTEM READY TO MAINTENANCE
US US US 9. GLOBE VALVE COMPLETED WITH MECHANICAL LOCKING, GLOBE VALVE WILL BE SET
Tag Number 188-SMP-31001A/B 33032 33031 33083 DURING COMMISSIONING
US US US UC UC UC 10. ALL TAG NUMBERS ON THIS P&ID WILL BE PREFIXED BY 188 UNLESS OTHERWISE
Service SUMP PIT
33066 33077 33075
33065 33084 33074 INDICATED.
Size (L x W x H) mm 1400 x 1400 x 2000
PLC
11.POTABLE WATER WILL BE USED FOR COOLING WATER.
US US US 12.PUMP TYPE IS HORIZONTAL SELF PRIMING PUMP.
33100 33098 33076 XA XI FI
Tag Number 33085B 33085A 13.DELETED.
188-VTK-31001-04 TYPE-1 33029
US US US PLC
14. WATER SEAL IS CONFIGURATION AND WATER SEAL TANK IS CONSIDERED AS SAFETY
188-VPM-31001-11 188-WU-36040-1"-1CS1W3-NI PLC
Service WATER STORAGE TANK 33039 33033 33038 RELATED DEVICE.
Size (ID x H) Ø1900 x 6080 US US US
US 15.MOTOR RUN, AVAILABLE, AND TRIP STATUS SIGNAL IS CONNECTED TO PLC WITH
188-WU-36016-1 1/2"-1CS1W3-NI 33085 33029
(Head/Head) mm 250 x 250 33086 33085 33045 PLC
33046 SIMOCODE USING PROFINET CABLE.
HV 36075
ϭΖΖdžϭϭͬϮΗ 33078
Working Capacity m³ 19 NC 1" P13 20 70 188-WU-36017-1"-1CS1W3-NI
1 1/2" RS
1" 1" 29
20 70 VSTR 36085
29 1 1/2" ϭϭͬϮΖΖ
CHV 36044 3.5 MIN 5D MIN 3D
Design Capacity m³ 19.4 AH
1 1/2" RS
NC 1/2''
LO
HV 36045
LI LI UC 3.5 LO HV 37044
1" NC
NC HV 37045
33013 33065 33065 ϭϭͬϮΖΖdžϭΗ HV 36042 1/2''
3/4''
ALL AL NC 188-VP-31001-11 HV 36043
Tag Number 188-VTK-31001-06 PLC PLC PLC 1" HV 36095
2'' x ϭϭͬϮΖΖ
HV 36077 UC UC
Service SOLUTION PREPARATION TANK 188-WU-36014-2"-1CS1W3-NI 33065 33020
33013 33065
PLC
Size (ID x H)mm Ø938 x 1750 RADAR RADAR XA XI 188-VPM-31001-10
CHV 36039 20 70
2'' 2" 37 33086B 33086A
Working Capacity m³ 0.97 HV 36040 12.0 PLC
TYPE-1
HV 37056 US
NC
Design Capacity m³ 1.2 3/4" L61 L61
33086 PLC
188-WU-36041-1"-1CS1W3-NI
2"
3"
MH 24"
3"
2"
33047
MOTOR TYPE-1
Tag Number 188-VTK-31001-07
(NOTE 15)
N1 N4 O₂
HV 36076
ϭΖΖdžϭϭͬϮΗ 33079 AI
AL
33022
Service DAILY PREPARATION TANK NC 1 1/2"
P13
1"
20
29
70 ALL COMMON AUTO/MAN START STOP
188-VTK-31001-04 20 70 VSTR 36086 RS 1" PLC
ALARM SELECTOR COMMAND COMMAND
2" 2"
29 1 1/2" 1 1/2" ϭϭͬϮΖΖ 1"
CHV 36048 LO 3.5
Size (ID x H)mm Ø1900 x 3000 RS
NC1/2'' HV 36180
N2 LO 2'' x ϭϭͬϮΖΖ 3.5 LO HV 37047 1" LO

1"
N3 ϭϭͬϮΖΖdžϭΗ HV 36047 NC 1/2'' HV 37048
NC HV 36050 XA HS HS HS
Working Capacity m³ 6.8 HV 36041 2" HV 36072
3/4'' HV 36049 Note 9 US US US AIT
NC 188-WU-36015-2"-1CS1W3-NI HV 36046 HV 37053 188-VP-31001-10 ZZZZZA ZZZZZC ZZZZZA ZZZZZB
1" 33033 33045 33039 33022
Design Capacity m³ 8.5 NC

188-WU-36018-1"-1CS1W3-NI
2"
LI
AH 188-WU-36071-1 1/2"-1CS1W3-NI PLC PLC PLC PLC PLC
33093 33093
HV 36890
L61 AL 20 1000
Tag Number 188-VTK-31001-08 Note 14 RADAR PLC 250
3.5

MIN 5D
3"
UC
Service WATER SEAL STORAGE TANK DOWN PIPE WITH
SYPHON BREAKER FI YYYYY
F81
Size (ID x H) mm Ø1432 x 3000 33030 33030
STILLING WELL

MIN 3D
PLC
Tag Number 188-VP-31001-09 LOCAL/
Working Capacity m³ 2.9 188-WU-36067-2"-1CS1W3-NI TI START
33020 UC TI
COMMAND REMOTE
Design Capacity m³ Service NaOH SOLUTION 0.05% PUMP 188-VTK-31001-08 2" LO FREE DRAINING PLC 33021 33021
4.8
HV 38026
SEE DETAIL 1 UC
1" PLC PLC
XI XI XS XS
Type CENTRIFUGAL PUMP 33020 N2
Note 14 1" N4
1 1/2" TE US US US US ZZZZZA ZZZZZD ZZZZZA ZZZZZB
Tag Number 188-VYM-31001-05 N4 PLC T26
Design Capacity l/hr 5000 188-WU-36068-2"-1CS1W3-NI
N6 33021

START
33032 33031 33083 33066 PLC PLC PLC PLC

STOP
NC
Service MIXER SOLUTION PREPARATION 2"
HV 38027
SEE DETAIL 2
TE
TANK Normal Capacity l/hr 1200 33020 US US US US
N1
Type VERTICAL Motor Tag Number 188-VDV-31001-01
T26 33077 33075 33100 33076
188-VPM-31001-09 AHH
US US US US N6 US
Impeller Diameter mm 155 33032 33031 33083 33066
1 1/2" 20
650
1000
US US US US US MCC
Rated Voltage VAC 380 PLC N2 3.5 XXXXX XS-ZZZZZC
N1 33039 33033 33045 33098 33038
US US US US 1 1/2"
188-VDV-31001-02
Impeller Quantity 4 Rated Power kW 2.2 TE N6 PLC
33077 33075 33100 33076 33090
T26
CARBON STEEL CARBON STEEL O
Rated Voltage VAC 380
N3 8" N3 8"
pH
FI H A LOC/REM
US US US US US 8" x 2" 8" x 2" 33028 SELECTOR
Tag Number 188-VP-31001-10 20 90 SS310 20 90 SS310 33089 PLC
Rated Power kW 0.37 33038 33039 33033 33045 33098 ALL
70 SS310 70 PLC HS START
Service COOLING WATER PUMP PLC 3.5
SS310 3.5
33028
Tag Number 188-VYM-31001-06 Type CENTRIFUGAL PUMP 2" CSC SS 316 A31 33089 HS STOP
ŝŶƚĞƌůŽĐŬ HV 36181
SS 316 2"
CSC
HV 36182
33089
PLC
Note 9
MIXER DAILY PREPARATION 188-WU-36060-2"-1SD0W3-PP ǀĂůǀĞ
Service Design Capacity l/hr 5000
/>K 1"
TANK ϮΖΖ
UC
LO
HV 37058 FREE DRAINING 33062 MIN 3D MIN 5D
Type VERTICAL Normal Capacity l/hr 1200 UC UC UC
HV 36054
188-WU-36061-2"-1SD0W3-PP 33074 33064 33006

Impeller Diameter mm 400 Motor Tag Number 188-VPM-31001-10 PLC

188-WU-36065-2"-1CS1W3-NI 188-VPM-31001-07
Impeller Quantity Rated Voltage VAC 380
/> XI XA
Z03 23.JAN.23 F- AS BUILT IRFAN MAURICO ANDHIKA
4 VSTR 36087 TYPE-1
33040A 33040B
ϮΖΖ HV 36051
ŝŶƚĞƌůŽĐŬ
ϮΖΖ
ϮΖΖ
US
PLC Note 13 UC
Rated Voltage VAC 380 Rated Power kW 2.2 AH ǀĂůǀĞ 33040 33074
UC LI UC
AH
LI
HV 36137 2''
HV 36082
PLC 33049 PLC Z02 01.JUL.21 F- AS BUILT ARIE MAURICO ANDHIKA
33006 33006 33062 33062 33062 SS316 CS 33057
Rated Power kW 2.2 AL AL 33001
Tag Number 188-VP-31001-11 PLC PLC PLC PLC RADAR 188-WU-36066-2"-1CS1W3-NI CS SS316 1 1/2" 1 1/2" x 2"
P13 HV 37049

VSTR 36088 ϮΗdžϭϭͬϮΖΖ

2" 2"
2"
FC 2"
Z01 28.SEP.20 F- AS BUILT ARIE MAURICO ANDHIKA
Tag Number 188-VP-31001-07 Service COOLING WATER PUMP 3"
LI US ϮΖΖ
ϮΖΖ ϮΖΖ
MIN RS CHV 36183 LO CHV 36889

L61 33061 33040 33061 ϭϭͬϮΖΖ 188-WU-36072-2"-1CS1W3-NI 1"

NC
NC 1"
33006 MIN
L61
10 18.AUG.20 R - SUBMIT FOR REVIEW ANDHIKA
RS

Service SUMP PIT WATER PUMP Type CENTRIFUGAL PUMP ALL

PLC PLC RADAR 2''
HV 36084 NC 1/2'' HV 36168 HV 36079 ARIE MAURICO
RADAR 3"
3" HV 36125 188-VP-31001-07 HV 36080

Type Design Capacity l/hr 5000 Note 12 UC

2" FO 188-WU-36073-2"-1CS1W3-NI
CENTRIFUGAL PUMP 3"
L61
33074 REV DATE DESCRIPTION DRAWN CHKD APPD
L61 PLC 70
Normal Capacity l/hr 33060 20
Design Capacity l/hr 5000 1200 FLEXIBLE HOUSE 29
RADAR
20
29
70
3.5
REVISIONS
Motor Tag Number 188-VPM-31001-11 33094 3.5
Normal Capacity l/hr 3000 US
LI US

188-WU-36021-2"-1CS1W3-NI
Motor Tag Number 188-VPM-31001-07 Rated Voltage VAC 380 33060 33040 33040
ALL
PLC PLC
Rated Power kW 2.2 188-SMP-31001B 188-SMP-31001A US US
Rated Voltage VAC 380 REFERENCE
33042 33085
70
Rated Power kW 5.5 1" 188-WU-36022-1"-1CS1W3-NI 20
29 DRAWINGS
3.5 US US US
CHV 36055

188-WU-36062-1"-1CS1W3-NI
UC 33032 33031 33083
XA 33089
Tag Number 188-VP-31001-08 33042B UC DWG NO. TITLE
US US PLC
US US US US US
33041 33042 33089
Service NaOH SOLUTION 30% PUMP UC XI 33042 33043 33066 33077 33075
PLC XA 33084 33042A PLC
TYPE-1 PLC
Type DOSING PUMP 33041B PLC PLC 188-VPM-31001-08 US US US
XA XI 188-VYM-31001-06
33100 33098 33076
TANGGUH EXPANSION PROJECT
XI
Design Capacity l/hr 6.13 33041A TYPE-1
33043B 33043A TYPE-1
HV 36057
US PLC
US
1"
PLC 20 70 AHH
Normal Capacity l/hr 5 188-VYM-31001-05 29
33042 20
29
70
33043
3"
L61
LI
3.5 33015
3.5 PLC L1 33015
PLC ALL
Motor Tag Number
1
188-VPM-31001-08 US 1" 1''x 2" 1 x 2"
1
2"x1''
RADAR PLC
33041 HV 36056 1''x2''
HV 36185 1/2" 1/2" 2" N3 1CS1W3
Rated Voltage VAC 380 PLC 1"
188-VP-31001-08 2"
N1 N2
2"

188-WU-36025-1"-1SD0W3-NI
NaOH Supply N6 2"
Note 7 188-WU-36050-1"-1SD0W3-NI 3"

188-WU-36023-1"-1SD0W3-NI
1 x 2"
Rated Power kW 0.37 AH L61
UC

188-WU-36064-2"-1SD0W3-NI
AH UC LI 1SD0W3
UC LI 3" 2" N1 2" N2 AHH
L1 US LI 33074 33074 33074 33021
33084 33084 33084
L61

N5 L61 AL 188-VY-31001-06
AL 2" 3" 33014 33042 33014 PLC PLC PLC XA
PLC PLC ALL
RADAR PLC PLC 188-VTK-31001-07 33044B
2" 188-VPM-31001-09 XI
N4
188-VY-31001-05
SS310 CARBON STEEL SS310 CARBON STEEL TYPE-1 33044A

N3 8" N3 8" 188-VTK-31001-06 2"

20
29
70 VSTR 36187
1"
PLC

3.5 US
PT. HASAKONA BINACIPTA
2"
8" x 2" 8" x 2" N2 HV 36186
2''x1''
33044
SS 316 SS310 SS 316 SS310 3/4''
HV 36096
2"
N5
HV 36059
20
29
70

N3 188-WU-36049-2"-1SD0W3-NI 3.5
PLC
NC
1" HV 36188
300 mm 33073
HV 37050
300 mm 33092
HV 36024 2" NC 33080
2" 2" Note 5 HV 36060 ϮΖΖ
HV 36062
CHV 36061
HV 36058 NC 1"
CSO CSO 1"
2" 2" 188-WU-36042-1"-1SD0W3-NI ϮΖΖ VSTR 36089 1"
Note 5
PIPING AND INSTRUMENTATION DIAGRAM (P&ID) for
P13
CSC CSC 3/4'' 33063
SS 316 CS SS 316 CS
RS
33089
RS
HV 36097
ϭϭͬϮΖΖ
188-VP-31001-09
1/2''
Note 13
HV 36098

HWI
Note 14 DETAIL 1 Note 14 DETAIL 2 2''xϭϭͬϮΖΖ
1/2'' HV 36099

SHEET 3 OF 4

PURCHASE ORDER NO : @BP p.l.c. SCALE

SECURITY CLASSIFICATION:
1198019 BP INTERNAL
NTS
COMPANY DRAWING NO. CORE SIZE REV.

TEP-1198019-C01-0001 NON CORE A3 Z03

SUPPLIER NUMBER CSTS NUMBER

51214 870310-S-1198019-MEC-C01-0001
 GENERAL NOTES :

1. SAMPLING NOZZLE 2 X 4" WITH 90° EQUALLY SPACE, SAMPLING NOZZLE WORK
FOR THE GAS EMISSION TEST ISSUED.

2. VSD WILL BE PROVIDED TO ADJUST IDF MOTOR SPEED MANUALLY WHEN

COMMISSIONING

3. ALL TAG NUMBERS ON THIS P&ID WILL BE PREFIXED BY 188 UNLESS OTHERWISE
INDICATED.

4. REFRACTORY AND INSULATION WILL BE PROVIDED TO ENSURE SURFACE

TEMPERATURE BELOW 60°C

Note 1

Tag
188-VFT-31001-01
Number
Service EXHAUST STACK
Size
750 x 15700 mm MOTOR TYPE-3
(IDxH) COMMON
ALARM
AUTO/MAIN
SELECTOR
START
COMMAND
STOP
COMMAND

TE Design
500 XA HS HS HS

T26
33007 Temperature °C ZZZZZA ZZZZZC ZZZZZA ZZZZZB
PLC PLC PLC PLC
Design
3.5 UC
Pressure (kg/cm².g) YYYYY

RUN AVAILABLE TRIPPED START LOCAL/ SPEED SPEED

STATUS STATUS STATUS COMMAND REMOTE REFERENCE FEEDBACK
US US US US
Note 4 33032 33031 33083 33066 Tag Number 188-VKE-31001-03
XI
ZZZZZA
XI
ZZZZZB
XA
ZZZZZB
XI
ZZZZZC
XI
ZZZZZD
XX
ZZZZZ
SI
ZZZZZ
XS
ZZZZZA
XS
ZZZZZB

START
PLC PLC PLC PLC PLC PLC PLC PLC PLC

STOP
188-VFT-31001-01 US US US US
Service IDF TRIP COMMAND
33077 33075 33100 33076 US
MCC
XXXXX XS-ZZZZZC
US US US US US Type Centrifugal Turbo Fan
O
A LOC/REM
33038 33039 33033 33045 33098 H
SELECTOR

PLC Design Capacity 9000 m³/hr HS START

HS STOP

AHH
Working Capacity 8085.05 m³/hr
33007
Motor Tag No Z03 23.JAN.23 F - AS BUILT IRFAN MAURICO ANDHIKA
PLC 188-VCM-31001-02
DUCTING
Flue Gas Z02 01.JUL.21 F - AS BUILT ARIE MAURICO ANDHIKA 6
Rated Power kW 22
Z01 28.SEP.20 F - AS BUILT ARIE MAURICO ANDHIKA
From Dry Scrubber
Rated Voltage VAC 380 10 18.AUG.20 R - SUBMIT FOR REVIEW ARIE MAURICO ANDHIKA
Sheet 3 of 4
REV DATE DESCRIPTION DRAWN CHKD APPD
REVISIONS
188-DS-36055-3/4"-1CS1W3-NI
HH
6"
REFERENCE
HV 36063 DRAWINGS
20 1000
250
DWG NO. TITLE
3.5
20
250
1000
To Grade
3.5 TANGGUH EXPANSION PROJECT
US US US
UC 33032 33031 33083
33013
DUCTING US US US
PLC
TYPE-3
XI XA 33066 33077 33075

Note 2 33045A 33045B US US US

188-VKE-31001-03 PLC
33100 33098 33076
HV 37051
PT. HASAKONA BINACIPTA
US US US
US
33039 33033 33038
33045
PLC
PLC US PIPING AND INSTRUMENTATION DIAGRAM (P&ID) for
33045
HWI
SHEET 4 OF 4

PURCHASE ORDER NO : @BP p.l.c. SCALE

SECURITY CLASSIFICATION:
1198019 BP INTERNAL
NTS
COMPANY DRAWING NO. CORE SIZE REV.

TEP-1198019-C01-0001 NON CORE A3 Z03

SUPPLIER NUMBER CSTS NUMBER

51214 870310-S-1198019-MEC-C01-0001