Home Steel Numbers Steel / Cast iron Standards Alloy Standards Search Worldwide Equivalents
YOU HERE: Steel Numbers -> Number 1.72XX OR Steel & Cast Iron Standards -> / EN 10083-3 / EN 10132-3 / EN 10216-2 / EN 10305-1 /
EN 10269 / EN 10263-4 / EN 10250-3 / EN 10297-1
25CrMo4 ( 1.7218 )
AdsStainless
by Factory since 1973
Stop seeing this ad Why this ad?
Ad Manufacture excellent and diversified stainless steel coils, sh
strips.
Ad
CHIAFAR INDUSTRIAL
Get Quote
Grade : 25CrMo4
Number: 1.7218
Classification: Alloy special steel
EN 10083-3: 2006 Steels for quenching and tempering. Technical delivery conditions for
alloy steels
EN 10132-3: 2000 Cold rolled narrow steel strip for heat treatment. Technical delivery
conditions. Steels for quenching and tempering
EN 10216-2: 2014 Seamless steel tubes for pressure purposes. Technical delivery
conditions. Non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10305-1: 2010 Steel tubes for precision applications. Seamless cold drawn tubes.
Technical delivery conditions
Standard:
EN 10269: 1999 Steels and nickel alloys for fasteners with specified elevated and/or low
temperature properties
EN 10263-4: 2001 Steel rod, bars and wire for cold heading and cold extrusion.
Technical delivery conditions for steels for quenching and tempering
EN 10250-3: 2000 Open steel die forgings for general engineering purposes. Alloy
special steels
EN 10297-1: 2003 Seamless circular steel tubes for mechanical and general engineering
purposes. Non-alloy and alloy steel tubes. Technical delivery conditions
Equivalent
Go here
grades:
Chemical composition % of steel 25CrMo4 (1.7218): EN 10083-3-2006
C Si Mn P S Cr Mo
0.22 - 0.29 max 0.4 0.6 - 0.9 max 0.025 max 0.035 0.9 - 1.2 0.15 - 0.3
Mechanical properties of steel 25CrMo4 (1.7218)
Nominal diameter (mm): to 16 16 - 40 40 - 100 100 - 160 160 - 330
Rm - Tensile strength (MPa) (+QT) 900-1100 800-950 700-850 650-800 600
Nominal thickness (mm): 0.3 - 3
Rm - Tensile strength (MPa) (+A) 580
Nominal thickness (mm): 0.3 - 3
Rm - Tensile strength (MPa) (+QT) 990-1400
Rm - Tensile strength (MPa) (+AC) 580
Rm - Tensile strength (MPa) (+C) 720
Rm - Tensile strength (MPa) (+LC) 670
Nominal thickness (mm): to 60
ReH - Minimum yield strength (MPa) (+QT) 345-355
Nominal diameter(mm): or for flat products
to 16 16 - 40 40 - 100 100 - 160 160 - 330
thickness: to 8; 8-20; 20-60; 60-100;
Re - Upper yield strength or
Rp0.2 - 0.2% proof strength (MPa) (+QT) 700 600 450 400 380
Nominal thickness(mm): 0.3 - 3
Rp0.2 0.2% proof strength (MPa) (+A) 440
+20°
KV - Impact energy (J) longitud., (+QT)
45-50
+20°
KV - Impact energy (J) transverse, (+QT)
27-32
Nominal thickness (mm): 0.3 - 3
A - Min. elongation Lo = 80 mm (%) (+A) 19
A - Min. elongation at fracture (%) longitud.,
18
(+QT)
A - Min. elongation at fracture (%)
15
transverse, (+QT)
A - Min. elongation at fracture (%) (+C) 4
A - Min. elongation at fracture (%) (+LC) 6
Nominal diameter (mm): or for flat
products thickness: to 8; 8-20; 20-60; 60- to 16 16 - 40 40 - 100 100 - 160
100;
A - Min. elongation Lo = 5,65 √ So (%) (+QT) 12 14 15 16
Nominal diameter (mm): or for flat
products thickness: to 8; 8-20; 20-60; 60- to 16 16 - 40 40 - 100 100 - 160
100;
Z - Reduction in cross section on fracture (%)
50 55 60 60
(+QT)
Z - Reduction in cross section on fracture (%)
59
(+AC)
Brinell hardness (HBW): (+S) 255
Brinell hardness (HBW): (+A) 212
Vickers hardness ( HV): (+A) 175
Vickers hardness ( HV): (+QT) 305 - 435
Equivalent grades of steel 25CrMo4 (1.7218)
Warning! Only for reference
EU USA Germany Japan France England Italy China Sweden Czechia Finland Russia Inter
EN - DIN,WNr JIS AFNOR BS UNI GB SS CSN SFS GOST ISO
SAE4130 25CrMo4 SCM420 25CD4 708A25 25CrMo4 30CrMo 2225 15130 25CrMo4 20KHM 25CrMo4
25CrMo4 SCM430 708M25 30KHM
CFS10 30KHMA
Mechanical properties
ReH Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d elasticite minimale
Rm Tensile strength / Zugfestigkeit / Resistance a la traction
A Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal
J Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc
Heat treatment conditions
+A Soft annealed +P Precipitation hardened
+AC Annealed to achieve spheroidization of the carbides +PE Peeled
+AR As rolled Air quenched and
+QA
+AT Solution annealed tempered
+C Cold drawn / hard Liquid quenched and
+QL
+CR Cold rolled tempered
+FP Treated to ferrite-pearlite structure and hardness range +QT Quenched and tempered
+I Isothermal annealing Treated to improve
+S
shearability
+LC Cold drawn / soft
+SH As rolled and turned
+M Thermo mechanical rolling
Cold drawn and stress
+N Normalized +SR
relieved
+NT Normalized and tempered +T Tempered
+TH Treated to hardness range
+WW Warm worked
+U Untreated
Alloy special steel
Chemical composition of steel 25CrMo4 (1.7218), Standards of steel 25CrMo4 (1.7218)
Mechanical Properties of steel 25CrMo4 (1.7218) Equivalent grades of steel 25CrMo4 (1.7218)
steel 25CrMo4 (1.7218) Tensile Strength, Elongation, Proof strength , Hardness
European Steel and Alloy Grades / Numbers Searchable Database © 2011- 2025 All rights reserved. About us. Contacts.
The contents from this Steel & Alloy Database may not be reproduced. The entire risk as to use of these content is assumed by you the user
Register To Download Free CAD
Carefully Selected Supplier For Each Product Line Global Network Of Manufacturing Partners
