Scribd
Upload
5 views7 pages

FLM29110D81

Uploaded by

jagadeesh kumar kolli
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
5 views7 pages

FLM29110D81

Uploaded by

jagadeesh kumar kolli
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 7

Abort Auto Provisioning and continue with normal setup ?

(yes/no)[n]: 2025 Aug 11


19:00:14 switch %POAP-2-POAP_FAILURE: POAP DHCP discover phase failed
2025 Aug 11 19:00:16 switch %POAP-2-POAP_INFO: Abort Power On Auto Provisioning and
continue with normal setup? (yes/no)[n]:
2025 Aug 11 19:00:16 switch %POAP-2-POAP_INFO: USB disk not detected
2025 Aug 11 19:00:16 switch %POAP-2-POAP_INFO: Start DHCP v4 session
2025 Aug 11 19:00:16 switch %POAP-2-POAP_DHCP_DISCOVER_START: POAP DHCP Discover
phase started
2025 Aug 11 19:00:16 switch %POAP-2-POAP_INFO: Abort Power On Auto Provisioning and
continue with normal setup? (yes/no)[n]:

Abort Auto Provisioning and continue with normal setup ?(yes/no)[n]: 2025 Aug 11
19:00:22 switch %POAP-2-POAP_FAILURE: POAP DHCP discover phase failed
no

Abort Auto Provisioning and continue with normal setup ?(yes/no)[n]: 2025 Aug 11
19:00:24 switch %POAP-2-POAP_INFO: Abort Power On Auto Provisioning and continue
with normal setup? (yes/no)[n]:
2025 Aug 11 19:00:24 switch %POAP-2-POAP_INFO: USB disk not detected
2025 Aug 11 19:00:24 switch %POAP-2-POAP_INFO: Start DHCP v4 session
2025 Aug 11 19:00:24 switch %POAP-2-POAP_DHCP_DISCOVER_START: POAP DHCP Discover
phase started
2025 Aug 11 19:00:24 switch %POAP-2-POAP_INFO: Abort Power On Auto Provisioning and
continue with normal setup? (yes/no)[n]:

Abort Auto Provisioning and continue with normal setup ?(yes/no)[n]:

Abort Auto Provisioning and continue with normal setup ?(yes/no)[n]:

Abort Auto Provisioning and continue with normal setup ?(yes/no)[n]:

Abort Auto Provisioning and continue with normal setup ?(yes/no)[n]: yes
2025 Aug 11 19:00:30 switch %USER-2-SYSTEM_MSG: Restoring all ports to default
state, please wait ... - poap
2025 Aug 11 19:00:30 switch %USER-2-SYSTEM_MSG: POAP restore to default finished.
- poap
2025 Aug 11 19:00:30 switch %POAP-2-POAP_FAILURE: POAP DHCP discover phase failed
2025 Aug 11 19:00:32 switch %POAP-2-POAP_INFO: Abort Power On Auto Provisioning and
continue with normal setup? (yes/no)[n]:
2025 Aug 11 19:00:32 switch %POAP-2-POAP_INFO: USB disk not detected

---- System Admin Account Setup ----

Do you want to enforce secure password standard (yes/no) [y]:

Enter the password for "admin":


Wrong Password, Reason:
[Length should be at least 8 characters]
Invalid admin password.
Enter the password for "admin":
Wrong Password, Reason:
[Length should be at least 8 characters]
Invalid admin password.

Enter the password for "admin": 2025 Aug 11 19:01:24 switch %PLATFORM-2-
PS_DETECT: Power supply 1 detected but shutdown (Serial number LIT2906A32U)

CISCO DMESG Address: 0xA4BFF018

ME Firmware Status #1: 0x000F0345


ME Firmware Status #2: 0x3800C000
ME Current State: Operational
ME Error Code: No Error
ME Operational Firmware Version: 06:3.0.3.214

CPU Signature - 0x00050665: Version - 0x00050660


CPU - 1 : Cores - 4 : HTEn - 1 : HT - 2 : Features - 0xBFEBFBFF
MicroCode Version : 0x0E000015

CPU Board IOFPGA Information:


CardType = 0x1040004
REV ID = 0x18
Creation Date = 0x20210104
SLOT ID = 0x1
Post Code = 0xE2

Board is : Keesler CPU Board

SPD Data in the ATMEL AT24C32 Serial EEPROM


Booting from Upgrade Bios
Code Signing Results:(0x80) 0x0
Using Upgrade FPGA
SECURE BOOT Result: Successfully!

SECURE BOOT: GOLDEN RESULTS


FPGA validation results(0x78): 0x11CE000
Reports errors found by boot monitor(0x7C): 0x0

SECURE BOOT: UPGRADE RESULTS


Upgrade FPGA validation results(0x98): 0xE003
Reports errors found by boot monitor(0x9C): 0x1
Secureboot system status monitor register(0x5C): 0x3CB7100

TAM Library Version: 4.6.1


Aikido Version: 6.0.5
Aikido Chip Serial Number:
D61CDBAFC6609F6054EBF4DF5B336CD400000000000000000000000000000000
Aikido FPGA Version: 0x1
Aikido chip authentication status is successfully!
Aikido KEY Format: UEFI
No development KEY found! Successfully

Board PID: [DS-C9220I-K9-SUP]


Product: NEXUS OS PRODUCT
BIOS Version: 1.14.0
IDROM MAC Address = A0:33:4F:8F:F5:10
CARD INDEX = 18120
Base Board MI FPGA Information:
REV ID = 0x1B
OcteonIII Net Processor found at PCI Bus: 0x01
F32 ASIC found at PCI Bus: 0x02
Tornado ASIC found at PCI Bus: 0x05
CPU IOFPGA found at PCI Bus: 0x09
MI FPGA found at PCI Bus: 0x0B
Intel iXGBE LAN found at PCI Bus: 0x04
Intel I210 LAN found at PCI Bus: 0x0A
All devices are up and running.

NEXUS OS Boot Mode = 0x0

Selected Boot Option:


NEXUS OS: GRUB Boot

MDS BIOS: v1.14.0 Date: 03/13/2024 12:44:59


System Date: 08/11/2025 Time: 19:02:34.0

Booting bootflash:/m9220-s7ek9-kickstart-mz.9.4.2a.bin bootflash:/m9220-s7ek9-


mz.9.4.2a.bin...
Booting bootflash:/m9220-s7ek9-kickstart-mz.9.4.2a.bin
Trying diskboot
IOFPGA ID: 0x11391590
Image SWID valid
Image MD5Sum match
OS Image Key Type: Release KEY

Image Signature verification was Successful.

Boot Time: 8/11/2025 19:2:53


INIT: version 2.88 booting

boot device node /dev/sda


obfl flash device node /dev/sdb
Checking obfl filesystem. done.
Checking all filesystems...r.r done.
[ 12.696768] Booted from primary IO-FPGA
ACT2: ACT2 AUTHENTICATION TEST STATUS : SUCCESS
Starting mcelog daemon
Loading system software
System image digital signature verification successful.
Uncompressing system image: bootflash:/m9220-s7ek9-mz.9.4.2a.bin Mon Aug 11
19:03:42 UTC 2025
blogger: nothing to do.
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
..done Mon Aug 11 19:03:45 UTC 2025
INIT: Entering runlevel: 3
starting statd: done
2025 Aug 11 19:03:55 %SYSLOG-2-SYSTEM_MSG : Syslogs wont be logged into logflash
until logflash is online
2025 Aug 11 19:03:58 %KERN-0-SYSTEM_MSG: [ 12.696768] Booted from primary IO-
FPGA - kernel

2025 Aug 11 19:04:12 %DEVICE-ALIAS-2-DDAS_DEFAULT_MODE: Device alias mode has been


set to enhanced mode.
[ 95.383892] OCTEON[0]: BAR0 start: 0x3ff0000000 mapped 8388608 of 8388608 bytes
[ 95.471753] OCTEON[0]: BAR1 start: 0x3fec000000 mapped 12582912 of 67108864
bytes
2025 Aug 11 19:04:31 switch %CARDCLIENT-2-REG: OK
2025 Aug 11 19:04:31 switch %KERN-0-SYSTEM_MSG: [ 95.383892] OCTEON[0]: BAR0
start: 0x3ff0000000 mapped 8388608 of 8388608 bytes - kernel
2025 Aug 11 19:04:31 switch %KERN-0-SYSTEM_MSG: [ 95.471753] OCTEON[0]: BAR1
start: 0x3fec000000 mapped 12582912 of 67108864 bytes - kernel

Abort Auto Provisioning and continue with normal setup ?(yes/no)[n]:


Starting Auto Provisioning...Done

Abort Auto Provisioning and continue with normal setup ?(yes/no)[n]:

Abort Auto Provisioning and continue with normal setup ?(yes/no)[n]:

Abort Auto Provisioning and continue with normal setup ?(yes/no)[n]:

Abort Auto Provisioning and continue with normal setup ?(yes/no)[n]: 2025 Aug 11
19:04:33 switch %POAP-2-POAP_INITED: POAP process initialized
n

Abort Auto Provisioning and continue with normal setup ?(yes/no)[n]: yes
2025 Aug 11 19:04:39 switch %USER-2-SYSTEM_MSG: Restoring all ports to default
state, please wait ... - poap
2025 Aug 11 19:04:39 switch %USER-2-SYSTEM_MSG: POAP restore to default finished.
- poap

---- System Admin Account Setup ----

Do you want to enforce secure password standard (yes/no) [y]: n

Enter the password for "admin":


Confirm the password for "admin":

---- Basic System Configuration Dialog ----

This setup utility will guide you through the basic configuration of
the system. Setup configures only enough connectivity for management
of the system.

Please register Cisco MDS 9000 Family devices promptly with your
supplier. Failure to register may affect response times for initial
service calls. MDS devices must be registered to receive entitled
support services.

Press Enter at anytime to skip a dialog. Use ctrl-c at anytime


to skip the remaining dialogs.

Would you like to enter the basic configuration dialog (yes/no): no

User Access Verification

User Access Verification


10.1.1.36 login: admin
Password: 2025 Aug 11 19:05:10 switch %PMON-SLOT1-2-PMON_CRIT_INFO: Port Monitor
Critical Information: Config download success .
2025 Aug 11 19:05:11 switch %PMON-SLOT1-2-PMON_CRIT_INFO: Port Monitor Critical
Information: Policy () deactivation is successful .
2025 Aug 11 19:05:11 switch %PMON-SLOT1-2-PMON_CRIT_INFO: Port Monitor Critical
Information: Policy (slowdrain) activation is successful .

Cisco Nexus Operating System (NX-OS) Software


TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2024, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
2025 Aug 11 19:05:18 switch %PLATFORM-2-PS_OK: Power supply 1 ok(Serial number
LIT2906A32U)
2025 Aug 11 19:05:18 switch %PLATFORM-2-PS_FANOK: Fan in Power supply 1 ok
2025 Aug 11 19:05:18 switch %PLATFORM-2-PS_OK: Power supply 2 ok(Serial number
LIT2906A2XZ)
2025 Aug 11 19:05:18 switch %PLATFORM-2-PS_FANOK: Fan in Power supply 2 ok

switch#
switch# conf t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# switchname 2025 Aug 11 19:05:27 switch %PLATFORM-1-PFM_ALERT: Four
Fan Tray system

^
% Incomplete command at '^' marker.
switch(config)# switchname SW-R11-R5-SEC
SW-R11-R5-SEC(config)# int
interface intersight
SW-R11-R5-SEC(config)# inter mgmt 0
SW-R11-R5-SEC(config-if)# ip address 172.17.27.72 255.255.252.0
SW-R11-R5-SEC(config-if)# ip def
default-gateway default-network
SW-R11-R5-SEC(config-if)# ip default-gateway 172.17.24.1
SW-R11-R5-SEC(config)# copy run startup-config
[########################################] 100%
Copy complete.
SW-R11-R5-SEC(config)# exi
SW-R11-R5-SEC# copy run startup-config
[########################################] 100%
Copy complete.
SW-R11-R5-SEC# wr
^
% Incomplete command at '^' marker.
SW-R11-R5-SEC#
SW-R11-R5-SEC#
SW-R11-R5-SEC# sh run | i ip
description This is a system defined role and applies to all users.
ip domain-lookup
ip host SW-R11-R5-SEC 172.17.27.72
rmon event 1 log trap public description FATAL(1) owner PMON@FATAL
rmon event 2 log trap public description CRITICAL(2) owner PMON@CRITICAL
rmon event 3 log trap public description ERROR(3) owner PMON@ERROR
rmon event 4 log trap public description WARNING(4) owner PMON@WARNING
rmon event 5 log trap public description INFORMATION(5) owner PMON@INFO
ip address 172.17.27.72 255.255.252.0
ip default-gateway 172.17.24.1
SW-R11-R5-SEC# sh run | i seri
SW-R11-R5-SEC# sh run | i inv
counter invalid-words poll-interval 30 delta rising-threshold 1 event 4 fallin
g-threshold 0 event 4 alerts syslog rmon portguard FPIN
counter invalid-crc poll-interval 30 delta rising-threshold 5 event 4 falling-
threshold 1 event 4 alerts syslog rmon portguard FPIN
SW-R11-R5-SEC# sh inv
NAME: "Chassis", DESCR: "MDS 9220i 12X32G FC + 4X1/10G or 2X25G or 40G IPS (1 R
U) Chassis"
PID: DS-C9220I-K9 , VID: V01 , SN: FLM29110D81

NAME: "Slot 1", DESCR: "1/10/25/40G IPS, 4/8/16/32G FC/Sup-4"


PID: DS-C9220I-K9-SUP , VID: V01 , SN: FLM29070LCY

NAME: "Slot 2", DESCR: "MDS 9220i 12X32G FC + 4X1/10G or 2X25G or 40G IPS (1 RU
) Chassis Power Supply"
PID: DS-CAC-500W-I , VID: V00 , SN: LIT2906A32U

NAME: "Slot 3", DESCR: "MDS 9220i 12X32G FC + 4X1/10G or 2X25G or 40G IPS (1 RU
) Chassis Power Supply"
PID: DS-CAC-500W-I , VID: V00 , SN: LIT2906A2XZ

NAME: "Slot 4", DESCR: "MDS 9220i 12X32G FC + 4X1/10G or 2X25G or 40G IPS (1 RU
) Chassis Fan Module"
PID: DS-C32S-FAN-I , VID: V00 , SN: N/A

NAME: "Slot 5", DESCR: "MDS 9220i 12X32G FC + 4X1/10G or 2X25G or 40G IPS (1 RU
) Chassis Fan Module"
PID: DS-C32S-FAN-I , VID: V00 , SN: N/A

NAME: "Slot 6", DESCR: "MDS 9220i 12X32G FC + 4X1/10G or 2X25G or 40G IPS (1 RU
) Chassis Fan Module"
PID: DS-C32S-FAN-I , VID: V00 , SN: N/A

NAME: "Slot 7", DESCR: "MDS 9220i 12X32G FC + 4X1/10G or 2X25G or 40G IPS (1 RU
) Chassis Fan Module"
PID: DS-C32S-FAN-I , VID: V00 , SN: N/A

SW-R11-R5-SEC# sh run | i ip
description This is a system defined role and applies to all users.
ip domain-lookup
ip host SW-R11-R5-SEC 172.17.27.72
rmon event 1 log trap public description FATAL(1) owner PMON@FATAL
rmon event 2 log trap public description CRITICAL(2) owner PMON@CRITICAL
rmon event 3 log trap public description ERROR(3) owner PMON@ERROR
rmon event 4 log trap public description WARNING(4) owner PMON@WARNING
rmon event 5 log trap public description INFORMATION(5) owner PMON@INFO
ip address 172.17.27.72 255.255.252.0
ip default-gateway 172.17.24.1
SW-R11-R5-SEC# sh inv
NAME: "Chassis", DESCR: "MDS 9220i 12X32G FC + 4X1/10G or 2X25G or 40G IPS (1 R
U) Chassis"
PID: DS-C9220I-K9 , VID: V01 , SN: FLM29110D81

NAME: "Slot 1", DESCR: "1/10/25/40G IPS, 4/8/16/32G FC/Sup-4"


PID: DS-C9220I-K9-SUP , VID: V01 , SN: FLM29070LCY

NAME: "Slot 2", DESCR: "MDS 9220i 12X32G FC + 4X1/10G or 2X25G or 40G IPS (1 RU
) Chassis Power Supply"
PID: DS-CAC-500W-I , VID: V00 , SN: LIT2906A32U

NAME: "Slot 3", DESCR: "MDS 9220i 12X32G FC + 4X1/10G or 2X25G or 40G IPS (1 RU
) Chassis Power Supply"
PID: DS-CAC-500W-I , VID: V00 , SN: LIT2906A2XZ

NAME: "Slot 4", DESCR: "MDS 9220i 12X32G FC + 4X1/10G or 2X25G or 40G IPS (1 RU
) Chassis Fan Module"
PID: DS-C32S-FAN-I , VID: V00 , SN: N/A

NAME: "Slot 5", DESCR: "MDS 9220i 12X32G FC + 4X1/10G or 2X25G or 40G IPS (1 RU
) Chassis Fan Module"
PID: DS-C32S-FAN-I , VID: V00 , SN: N/A

NAME: "Slot 6", DESCR: "MDS 9220i 12X32G FC + 4X1/10G or 2X25G or 40G IPS (1 RU
) Chassis Fan Module"
PID: DS-C32S-FAN-I , VID: V00 , SN: N/A

NAME: "Slot 7", DESCR: "MDS 9220i 12X32G FC + 4X1/10G or 2X25G or 40G IPS (1 RU
) Chassis Fan Module"
PID: DS-C32S-FAN-I , VID: V00 , SN: N/A

SW-R11-R5-SEC#

You might also like