Project* Page 1 of 15

Project*
First Saved Wednesday, July 30, 2025
Last Saved Wednesday, July 30, 2025
Product Version 2021 R2
Save Project Before Solution No
Save Project After Solution No

file:///C:/Users/zestrox/AppData/Roaming/Ansys/v212/Mechanical_Report/Mechanical_Report.htm 7/30/2025
Project* Page 2 of 15

Contents
l Units

l Model (B4)
¡ Geometry
n Parts
¡ Materials
¡ Coordinate Systems
¡ Connections
n Contacts
n Contact Regions
¡ Mesh
n Body Sizing
¡ Static Structural (B5)
n Analysis Settings
n Loads
n Solution (B6)
n Solution Information
n Results

l Material Data
¡ AL 6063 T5
¡ Silicon, pure

Units
TABLE 1
Unit System Metric (m, kg, N, s, V, A) Degrees rad/s Celsius
Angle Degrees
Rotational Velocity rad/s
Temperature Celsius

Model (B4)
Geometry
TABLE 2
Model (B4) > Geometry
Object Name Geometry
State Fully Defined
Definition
Source C:\Users\zestrox\Desktop\BH Group\L2 with 1303 mm Panal Length\L2 Pro at 15 (1134mm by 2384mm)\L2 Pro at 15 2384mm.STEP
Type Step
Length Unit Millimeters
Element Control Program Controlled
Display Style Body Color
Bounding Box
Length X 2.384 m
Length Y 0.70336 m
Length Z 2.427 m
Properties
Volume 0.16424 m³
Mass 383.22 kg
Scale Factor Value 1.
Statistics

file:///C:/Users/zestrox/AppData/Roaming/Ansys/v212/Mechanical_Report/Mechanical_Report.htm 7/30/2025
Project* Page 3 of 15

Bodies 12
Active Bodies 12
Nodes 1517528
Elements 857040
Mesh Metric None
Update Options
Assign Default Material No
Basic Geometry Options
Solid Bodies Yes
Surface Bodies Yes
Line Bodies No
Parameters Independent
Parameter Key ANS;DS
Attributes No
Named Selections No
Material Properties No
Advanced Geometry Options
Use Associativity Yes
Coordinate Systems No
Reader Mode Saves Updated File No
Use Instances Yes
Smart CAD Update Yes
Compare Parts On Update No
Analysis Type 3-D
Mixed Import Resolution None
Import Facet Quality Source
Clean Bodies On Import No
Stitch Surfaces On Import Program Tolerance
Decompose Disjoint Geometry Yes
Enclosure and Symmetry Processing Yes

TABLE 3
Model (B4) > Geometry > Parts
Strcuture for L2 Strcuture for L2 Strcuture for L2 Strcuture for L2
Strcuture for L2 Pro Strcuture for L2 Strcuture for L2 Strcuture for L2 Pro Strcuture for L2 Strcuture for L2 Panel Simple
Pro Pro 2384mm|V Pro 2384mm|V Pro
2384mm|Extrusion Rail Pro 2384mm|Back Pro 2384mm|Extrusion Rail Pro 2384mm|Front Pro 2384mm|Back 1134 by
Object Name 2384mm|Front leg 1 for L2 Pro leg 1 for L2 Pro 2384mm|Leg
with 34mm width for L2 Foot for L2 Pro at 2384mm|Leg with 34mm width for L2 Foot for L2|Cut- Foot for L2 Pro at 2384|Boss-
Foot for L2|Cut- at 15|Cut- at 15|Cut- 1|Cut-Extrude3
Pro|Cut-Extrude1 15|Cut-Extrude2 1|Cut-Extrude3 Pro|Cut-Extrude1[2] Extrude5[2] 15|Cut-Extrude2[2] Extrude2
Extrude5 Extrude2 Extrude2[2] [2]
State Meshed
Graphics Properties
Visible Yes
Transparency 1
Definition
Suppressed No
Stiffness
Flexible
Behavior
Coordinate
Default Coordinate System
System
Reference
By Environment
Temperature
Treatment None
Material
Assignment AL 6063 T5 Silicon, pure
Nonlinear
Yes
Effects
Thermal
Yes
Strain Effects
Bounding Box
Length X 3.4e-002 m 0.107 m 0.11 m 3.9e-002 m 3.4e-002 m 0.107 m 0.11 m 3.9e-002 m 2.384 m
Length Y 0.68086 m 4.5e-002 m 5.5e-002 m 0.56978 m 0.38016 m 0.68086 m 4.5e-002 m 5.5e-002 m 0.56978 m 0.38016 m 0.32344 m

file:///C:/Users/zestrox/AppData/Roaming/Ansys/v212/Mechanical_Report/Mechanical_Report.htm 7/30/2025
Project* Page 4 of 15

Length Z 2.4239 m 3.5e-002 m 0.2 m 0.37413 m 0.31135 m 2.4239 m 3.5e-002 m 0.2 m 0.37413 m 0.31135 m 1.1034 m
Properties
1.3277e-004 1.3277e-004 8.1171e-002
Volume 5.6907e-004 m³ 2.292e-005 m³ 1.3197e-004 m³ 9.2293e-005 m³ 5.6907e-004 m³ 2.292e-005 m³ 1.3197e-004 m³ 9.2293e-005 m³
m³ m³ m³
Mass 1.5365 kg 6.1885e-002 kg 0.35633 kg 0.35848 kg 0.24919 kg 1.5365 kg 6.1885e-002 kg 0.35633 kg 0.35848 kg 0.24919 kg 189.05 kg
Centroid X 1.417 m 1.7e-002 m 0.71705 m
Centroid Y 0.34406 m 1.0411e-002 m 1.1472e-002 m 0.28497 m 0.19039 m 0.34406 m 1.0411e-002 m 1.1472e-002 m 0.28497 m 0.19039 m 0.54205 m
Centroid Z 0.4894 m 1.6876 m 1.e-001 m -0.12152 m 0.29075 m 0.4894 m 1.6876 m 1.e-001 m -0.12152 m 0.29075 m -0.11279 m
Moment of 1.7454e-005 1.2091e-002 4.1151e-003 1.7454e-005 1.2091e-002 4.1151e-003
0.80024 kg·m² 1.2781e-003 kg·m² 0.80024 kg·m² 1.2781e-003 kg·m² 20.293 kg·m²
Inertia Ip1 kg·m² kg·m² kg·m² kg·m² kg·m² kg·m²
Moment of 5.0991e-005 1.2042e-002 4.0804e-003 5.0991e-005 1.2042e-002 4.0804e-003
0.8003 kg·m² 1.479e-003 kg·m² 0.8003 kg·m² 1.479e-003 kg·m² 109.85 kg·m²
Inertia Ip2 kg·m² kg·m² kg·m² kg·m² kg·m² kg·m²
Moment of 5.4956e-005 1.4123e-004 9.8576e-005 5.4956e-005 1.4123e-004 9.8576e-005
5.387e-004 kg·m² 3.7507e-004 kg·m² 5.387e-004 kg·m² 3.7507e-004 kg·m² 89.585 kg·m²
Inertia Ip3 kg·m² kg·m² kg·m² kg·m² kg·m² kg·m²
Statistics
Nodes 49818 32688 499262 16366 11593 49818 32688 499262 16366 11593 149037
Elements 24178 17156 290851 7656 5306 24178 17156 290851 7656 5306 83373
Mesh Metric None

TABLE 4
Model (B4) > Geometry > Parts
Object Name Panel Simple 1134 by 2384|Boss-Extrude2[2]
State Meshed
Graphics Properties
Visible Yes
Transparency 1
Definition
Suppressed No
Stiffness Behavior Flexible
Coordinate System Default Coordinate System
Reference Temperature By Environment
Treatment None
Material
Assignment Silicon, pure
Nonlinear Effects Yes
Thermal Strain Effects Yes
Bounding Box
Length X 2.384 m
Length Y 0.32344 m
Length Z 1.1034 m
Properties
Volume 8.1171e-002 m³
Mass 189.05 kg
Centroid X 0.71705 m
Centroid Y 0.24234 m
Centroid Z 1.0057 m
Moment of Inertia Ip1 20.293 kg·m²
Moment of Inertia Ip2 109.85 kg·m²
Moment of Inertia Ip3 89.585 kg·m²
Statistics
Nodes 149037
Elements 83373
Mesh Metric None

TABLE 5
Model (B4) > Materials
Object Name Materials
State Fully Defined
Statistics

file:///C:/Users/zestrox/AppData/Roaming/Ansys/v212/Mechanical_Report/Mechanical_Report.htm 7/30/2025
Project* Page 5 of 15

Materials 2
Material Assignments 0

Coordinate Systems
TABLE 6
Model (B4) > Coordinate Systems > Coordinate System
Object Name Global Coordinate System
State Fully Defined
Definition
Type Cartesian
Coordinate System ID 0.
Origin
Origin X 0. m
Origin Y 0. m
Origin Z 0. m
Directional Vectors
X Axis Data [ 1. 0. 0. ]
Y Axis Data [ 0. 1. 0. ]
Z Axis Data [ 0. 0. 1. ]

Connections
TABLE 7
Model (B4) > Connections
Object Name Connections
State Fully Defined
Auto Detection
Generate Automatic Connection On Refresh Yes
Transparency
Enabled Yes

TABLE 8
Model (B4) > Connections > Contacts
Object Name Contacts
State Fully Defined
Definition
Connection Type Contact
Scope
Scoping Method Geometry Selection
Geometry All Bodies
Auto Detection
Tolerance Type Slider
Tolerance Slider 0.
Tolerance Value 8.685e-003 m
Use Range No
Face/Face Yes
Face-Face Angle Tolerance 75. °
Face Overlap Tolerance Off
Cylindrical Faces Include
Face/Edge No
Edge/Edge No
Priority Include All
Group By Bodies
Search Across Bodies
Statistics
Connections 14
Active Connections 14

file:///C:/Users/zestrox/AppData/Roaming/Ansys/v212/Mechanical_Report/Mechanical_Report.htm 7/30/2025
Project* Page 6 of 15

TABLE 9
Model (B4) > Connections > Contacts > Contact Regions
Bonded -
Bonded -
Strcuture for Bonded - Strcuture
Bonded - Strcuture Bonded - Strcuture Bonded - Strcuture Bonded - Strcuture Strcuture for L2 Bonded - Strcuture Bonded - Strcuture Bonded - Strcuture
Bonded - Strcuture L2 Pro for L2 Pro
for L2 Pro for L2 Pro for L2 Pro for L2 Pro Pro for L2 Pro for L2 Pro for L2 Pro
for L2 Pro 2384mm|Back 2384mm|Extrusion
2384mm|Extrusion 2384mm|Extrusion 2384mm|Extrusion 2384mm|Extrusion 2384mm|Back 2384mm|Extrusion 2384mm|Extrusion 2384mm|Extrusion
2384mm|Extrusion Foot for L2 Pro Rail with 34mm
Rail with 34mm Rail with 34mm Rail with 34mm Rail with 34mm Foot for L2 Pro Rail with 34mm Rail with 34mm Rail with 34mm
Rail with 34mm at 15|Cut- width for L2
Object width for L2 width for L2 width for L2 width for L2 at 15|Cut- width for L2 width for L2 width for L2
width for L2 Extrude2 To Pro|Cut-Extrude1
Name Pro|Cut-Extrude1 Pro|Cut-Extrude1 Pro|Cut-Extrude1 Pro|Cut-Extrude1 Extrude2 To Pro|Cut-Extrude1 Pro|Cut-Extrude1 Pro|Cut-Extrude1
Pro|Cut-Extrude1 Strcuture for [2] To Strcuture for
To Strcuture for L2 To Strcuture for L2 To Panel Simple To Panel Simple Strcuture for L2 [2] To Strcuture for [2] To Strcuture for [2] To Panel
To Strcuture for L2 L2 Pro L2 Pro
Pro 2384mm|Front Pro 2384mm|V leg 1134 by 1134 by Pro L2 Pro 2384mm|V L2 Pro Simple 1134 by
Pro 2384mm|Leg 2384mm|V leg 2384mm|Front
Foot for L2|Cut- 1 for L2 Pro at 2384|Boss- 2384|Boss- 2384mm|Leg leg 1 for L2 Pro at 2384mm|Leg 2384|Boss-
1|Cut-Extrude3 1 for L2 Pro at Foot for L2|Cut-
Extrude5 15|Cut-Extrude2 Extrude2 Extrude2[2] 1|Cut-Extrude3 15|Cut-Extrude2[2] 1|Cut-Extrude3[2] Extrude2
15|Cut- Extrude5[2]
Extrude2
State Fully Defined
Scope
Scoping
Geometry Selection
Method
Contact 2 Faces 4 Faces 2 Faces
Target 4 Faces 2 Faces 1 Face 2 Faces 4 Faces 2 Faces 1 Face
Strcuture for L2 Pro
Contact Strcuture for L2 Pro 2384mm|Extrusion Rail with 34mm width for L2 Pro|Cut-
Strcuture for L2 Pro 2384mm|Extrusion Rail with 34mm width for L2 Pro|Cut-Extrude1 2384mm|Back Foot for L2 Pro
Bodies Extrude1[2]
at 15|Cut-Extrude2
Strcuture for
Strcuture for
Strcuture for L2 Strcuture for L2 L2 Pro Strcuture for L2 Strcuture for L2
Strcuture for L2 Panel Simple 1134 Panel Simple 1134 L2 Pro Strcuture for L2 Panel Simple 1134
Target Pro 2384mm|Front Pro 2384mm|V leg 2384mm|V leg Pro 2384mm|Front Pro 2384mm|V leg
Pro 2384mm|Leg by 2384|Boss- by 2384|Boss- 2384mm|Leg Pro 2384mm|Leg by 2384|Boss-
Bodies Foot for L2|Cut- 1 for L2 Pro at 1 for L2 Pro at Foot for L2|Cut- 1 for L2 Pro at
1|Cut-Extrude3 Extrude2 Extrude2[2] 1|Cut- 1|Cut-Extrude3[2] Extrude2
Extrude5 15|Cut-Extrude2 15|Cut- Extrude5[2] 15|Cut-Extrude2[2]
Extrude3
Extrude2
Protected No
Definition
Type Bonded
Scope
Manual
Mode
Behavior Program Controlled
Trim
Program Controlled
Contact
Suppressed No
Advanced
Formulation Program Controlled
Small
Program Controlled
Sliding
Detection
Program Controlled
Method
Penetration
Program Controlled
Tolerance
Elastic Slip
Program Controlled
Tolerance
Normal
Program Controlled
Stiffness
Update
Program Controlled
Stiffness
Pinball
Program Controlled
Region
Geometric Modification
Contact
Geometry None
Correction
Target
Geometry None
Correction

file:///C:/Users/zestrox/AppData/Roaming/Ansys/v212/Mechanical_Report/Mechanical_Report.htm 7/30/2025
Project* Page 7 of 15

TABLE 10
Model (B4) > Connections > Contacts > Contact Regions
Bonded - Strcuture for L2 Pro 2384mm|Extrusion Rail with 34mm width Bonded - Strcuture for L2 Pro 2384mm|Back Foot for L2 Pro at 15|Cut- Bonded - Strcuture for L2 Pro 2384mm|Back Foot for L2 Pro at
Object Name for L2 Pro|Cut-Extrude1[2] To Panel Simple 1134 by 2384|Boss- Extrude2[2] To Strcuture for L2 Pro 2384mm|V leg 1 for L2 Pro at 15|Cut-Extrude2[2] To Strcuture for L2 Pro 2384mm|Leg 1|Cut-
Extrude2[2] 15|Cut-Extrude2[2] Extrude3[2]
State Fully Defined
Scope
Scoping Method Geometry Selection
Contact 2 Faces 4 Faces
Target 1 Face 2 Faces
Strcuture for L2 Pro 2384mm|Extrusion Rail with 34mm width for L2
Contact Bodies Strcuture for L2 Pro 2384mm|Back Foot for L2 Pro at 15|Cut-Extrude2[2]
Pro|Cut-Extrude1[2]
Target Bodies Panel Simple 1134 by 2384|Boss-Extrude2[2] Strcuture for L2 Pro 2384mm|V leg 1 for L2 Pro at 15|Cut-Extrude2[2] Strcuture for L2 Pro 2384mm|Leg 1|Cut-Extrude3[2]
Protected No
Definition
Type Bonded
Scope Mode Manual
Behavior Program Controlled
Trim Contact Program Controlled
Suppressed No
Advanced
Formulation Program Controlled
Small Sliding Program Controlled
Detection Method Program Controlled
Penetration
Program Controlled
Tolerance
Elastic Slip
Program Controlled
Tolerance
Normal Stiffness Program Controlled
Update Stiffness Program Controlled
Pinball Region Program Controlled
Geometric Modification
Contact Geometry
None
Correction
Target Geometry
None
Correction

Mesh
TABLE 11
Model (B4) > Mesh
Object Name Mesh
State Solved
Display
Display Style Use Geometry Setting
Defaults
Physics Preference Mechanical
Element Order Program Controlled
Element Size 1.e-002 m
Sizing
Use Adaptive Sizing Yes
Resolution Default (2)
Mesh Defeaturing Yes
Defeature Size Default
Transition Fast
Span Angle Center Coarse
Initial Size Seed Assembly
Bounding Box Diagonal 3.474 m
Average Surface Area 6.0061e-003 m²
Minimum Edge Length 7.213e-005 m

file:///C:/Users/zestrox/AppData/Roaming/Ansys/v212/Mechanical_Report/Mechanical_Report.htm 7/30/2025
Project* Page 8 of 15

Quality
Check Mesh Quality Yes, Errors
Error Limits Aggressive Mechanical
Target Quality Default (0.050000)
Smoothing Medium
Mesh Metric None
Inflation
Use Automatic Inflation None
Inflation Option Smooth Transition
Transition Ratio 0.272
Maximum Layers 5
Growth Rate 1.2
Inflation Algorithm Pre
View Advanced Options No
Advanced
Number of CPUs for Parallel Part Meshing Program Controlled
Straight Sided Elements No
Rigid Body Behavior Dimensionally Reduced
Triangle Surface Mesher Program Controlled
Topology Checking Yes
Pinch Tolerance Please Define
Generate Pinch on Refresh No
Statistics
Nodes 1517528
Elements 857040

TABLE 12
Model (B4) > Mesh > Mesh Controls
Object Name Body Sizing
State Fully Defined
Scope
Scoping Method Geometry Selection
Geometry 2 Bodies
Definition
Suppressed No
Type Element Size
Element Size 2.e-003 m
Advanced
Defeature Size Default
Behavior Soft

Static Structural (B5)

TABLE 13
Model (B4) > Analysis
Object Name Static Structural (B5)
State Solved
Definition
Physics Type Structural
Analysis Type Static Structural
Solver Target Mechanical APDL
Options
Environment Temperature 22. °C
Generate Input Only No

TABLE 14
Model (B4) > Static Structural (B5) > Analysis Settings
Object Name Analysis Settings

file:///C:/Users/zestrox/AppData/Roaming/Ansys/v212/Mechanical_Report/Mechanical_Report.htm 7/30/2025
Project* Page 9 of 15

State Fully Defined

Step Controls
Number Of Steps 1.
Current Step Number 1.
Step End Time 1. s
Auto Time Stepping Program Controlled
Solver Controls
Solver Type Program Controlled
Weak Springs Off
Solver Pivot Checking Program Controlled
Large Deflection Off
Inertia Relief Off
Quasi-Static Solution Off
Rotordynamics Controls
Coriolis Effect Off
Restart Controls
Generate Restart Points Program Controlled
Retain Files After Full Solve No
Combine Restart Files Program Controlled
Nonlinear Controls
Newton-Raphson Option Program Controlled
Force Convergence Program Controlled
Moment Convergence Program Controlled
Displacement Convergence Program Controlled
Rotation Convergence Program Controlled
Line Search Program Controlled
Stabilization Program Controlled
Advanced
Inverse Option No
Contact Split (DMP) Off
Output Controls
Stress Yes
Surface Stress No
Back Stress No
Strain Yes
Contact Data Yes
Nonlinear Data No
Nodal Forces No
Volume and Energy Yes
Euler Angles Yes
General Miscellaneous No
Contact Miscellaneous No
Store Results At All Time Points
Result File Compression Program Controlled
Analysis Data Management
Solver Files Directory C:\Users\zestrox\Desktop\BH Group\L2 with 1303 mm Panal Length\L2 Pro at 15 (1134mm by 2384mm)\L2 Pro 2384mm Panel CFD and static_files\dp0\SYS\MECH\
Future Analysis None
Scratch Solver Files Directory
Save MAPDL db No
Contact Summary Program Controlled
Delete Unneeded Files Yes
Nonlinear Solution No
Solver Units Active System
Solver Unit System mks

TABLE 15
Model (B4) > Static Structural (B5) > Loads
Object Name Fixed Support Force Force 2 Force 3 Fixed Support 2
State Fully Defined

file:///C:/Users/zestrox/AppData/Roaming/Ansys/v212/Mechanical_Report/Mechanical_Report.htm 7/30/2025
Project* Page 10 of 15

Scope
Scoping Method Geometry Selection
Geometry 12 Faces 2 Faces 4 Faces 16 Faces
Definition
Type Fixed Support Force Fixed Support
Suppressed No
Define By Components
Applied By Surface Effect
Coordinate System Global Coordinate System
X Component 0. N (ramped)
Y Component -400. N (ramped) 6446.2 N (ramped)
Z Component 0. N (ramped) 1933.4 N (ramped)

FIGURE 1
Model (B4) > Static Structural (B5) > Force

FIGURE 2
Model (B4) > Static Structural (B5) > Force 2

file:///C:/Users/zestrox/AppData/Roaming/Ansys/v212/Mechanical_Report/Mechanical_Report.htm 7/30/2025
Project* Page 11 of 15

FIGURE 3
Model (B4) > Static Structural (B5) > Force 3

Solution (B6)
TABLE 16
Model (B4) > Static Structural (B5) > Solution
Object Name Solution (B6)
State Solved
Adaptive Mesh Refinement
Max Refinement Loops 1.

file:///C:/Users/zestrox/AppData/Roaming/Ansys/v212/Mechanical_Report/Mechanical_Report.htm 7/30/2025
Project* Page 12 of 15

Refinement Depth 2.
Information
Status Done
MAPDL Elapsed Time 1 m 53 s
MAPDL Memory Used 29.047 GB
MAPDL Result File Size 424.63 MB
Post Processing
Beam Section Results No
On Demand Stress/Strain No

TABLE 17
Model (B4) > Static Structural (B5) > Solution (B6) > Solution Information
Object Name Solution Information
State Solved
Solution Information
Solution Output Solver Output
Newton-Raphson Residuals 0
Identify Element Violations 0
Update Interval 2.5 s
Display Points All
FE Connection Visibility
Activate Visibility Yes
Display All FE Connectors
Draw Connections Attached To All Nodes
Line Color Connection Type
Visible on Results No
Line Thickness Single
Display Type Lines

TABLE 18
Model (B4) > Static Structural (B5) > Solution (B6) > Results
Object Name Total Deformation Equivalent Stress
State Solved
Scope
Scoping Method Geometry Selection
Geometry All Bodies
Definition
Type Total Deformation Equivalent (von-Mises) Stress
By Time
Display Time Last
Calculate Time History Yes
Identifier
Suppressed No
Results
Minimum 0. m 0. Pa
Maximum 3.5026e-003 m 1.3902e+008 Pa
Average 2.3011e-004 m 1.3143e+006 Pa
Minimum Occurs On Strcuture for L2 Pro 2384mm|Extrusion Rail with 34mm width for L2 Pro|Cut-Extrude1 Strcuture for L2 Pro 2384mm|Front Foot for L2|Cut-Extrude5
Maximum Occurs On Strcuture for L2 Pro 2384mm|Extrusion Rail with 34mm width for L2 Pro|Cut-Extrude1[2] Strcuture for L2 Pro 2384mm|Extrusion Rail with 34mm width for L2 Pro|Cut-Extrude1
Information
Time 1. s
Load Step 1
Substep 1
Iteration Number 1
Integration Point Results
Display Option Averaged
Average Across Bodies No

FIGURE 4

file:///C:/Users/zestrox/AppData/Roaming/Ansys/v212/Mechanical_Report/Mechanical_Report.htm 7/30/2025
Project* Page 13 of 15

Model (B4) > Static Structural (B5) > Solution (B6) > Total Deformation

TABLE 19
Model (B4) > Static Structural (B5) > Solution (B6) > Total Deformation
Time [s] Minimum [m] Maximum [m] Average [m]
1. 0. 3.5026e-003 2.3011e-004

FIGURE 5
Model (B4) > Static Structural (B5) > Solution (B6) > Equivalent Stress

TABLE 20
Model (B4) > Static Structural (B5) > Solution (B6) > Equivalent Stress

file:///C:/Users/zestrox/AppData/Roaming/Ansys/v212/Mechanical_Report/Mechanical_Report.htm 7/30/2025
Project* Page 14 of 15

Time [s] Minimum [Pa] Maximum [Pa] Average [Pa]

1. 0. 1.3902e+008 1.3143e+006

Material Data
AL 6063 T5
TABLE 21
AL 6063 T5 > Constants
Density 2700 kg m^-3

TABLE 22
AL 6063 T5 > Color
Red Green Blue
170 170 170

TABLE 23
AL 6063 T5 > Isotropic Elasticity
Young's Modulus Pa Poisson's Ratio Bulk Modulus Pa Shear Modulus Pa Temperature C
6.89e+010 0.33 6.7549e+010 2.5902e+010

TABLE 24
AL 6063 T5 > Tensile Yield Strength
Tensile Yield Strength Pa
2.14e+008

TABLE 25
AL 6063 T5 > Tensile Ultimate Strength
Tensile Ultimate Strength Pa
2.41e+008

Silicon, pure
TABLE 26
Silicon, pure > Constants
Density 2329 kg m^-3
Tensile Yield Strength 1.723e+008 Pa
Tensile Ultimate Strength 1.723e+008 Pa
Isotropic Secant Coefficient of Thermal Expansion 2.578e-006 C^-1
Isotropic Thermal Conductivity 154.3 W m^-1 C^-1
Specific Heat Constant Pressure 695.1 J kg^-1 C^-1

TABLE 27
Silicon, pure > Appearance
Red Green Blue
204 204 204
Opacity
0.8
Metallic Finish
0

TABLE 28
Silicon, pure > Isotropic Elasticity
Young's Modulus Pa Poisson's Ratio Bulk Modulus Pa Shear Modulus Pa Temperature C
1.627e+011 0.27 1.179e+011 6.4055e+010 23

TABLE 29
Silicon, pure > Isotropic Secant Coefficient of Thermal Expansion
Zero-Thermal-Strain Reference Temperature C

file:///C:/Users/zestrox/AppData/Roaming/Ansys/v212/Mechanical_Report/Mechanical_Report.htm 7/30/2025
Project* Page 15 of 15

20

file:///C:/Users/zestrox/AppData/Roaming/Ansys/v212/Mechanical_Report/Mechanical_Report.htm 7/30/2025