Mirror Glaze® Pro Speed Compound (Professional) M100 [M10001 M10032] 05/18/20

Safety Data Sheet

Copyright,2020, Meguiar's Inc.
All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing Meguiar's Inc.
products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is
obtained from Meguiar's Inc., and (2) neither the copy nor the original is resold or otherwise distributed with the intention of
earning a profit thereon.

Document Group: 31-3490-5 Version Number: 4.04

Issue Date: 05/18/20 Supercedes Date: 12/17/19

SECTION 1: Identification
1.1. Product identifier
Mirror Glaze® Pro Speed Compound (Professional) M100 [M10001 M10032]

Product Identification Numbers

ID Number UPC ID Number UPC
14-1000-8648-8 070382008567

7100178690

1.2. Recommended use and restrictions on use

Recommended use
Automotive, Rubbing/Polishing Compound

1.3. Supplier’s details

MANUFACTURER: Meguiar's, Inc.
DIVISION: Meguiar's
ADDRESS: 17991 Mitchell South, Irvine, CA 92614, USA
Telephone: 949-752-8000 (Fax: 949-752-5784)

1.4. Emergency telephone number

CHEMTREC 1-800-424-9300 (24 hours)

SECTION 2: Hazard identification

The label elements below were prepared in accordance with OSHA Hazard Communication Standard, 29 CFR 1910.1200.
This information may be different from the actual product label information for labels regulated by other agencies.

2.1. Hazard classification

Flammable Liquid: Category 4.

2.2. Label elements

Signal word
Warning

Page 1 of 11
Mirror Glaze® Pro Speed Compound (Professional) M100 [M10001 M10032] 05/18/20

Symbols
Not applicable

Pictograms
Not applicable

Hazard Statements
Combustible liquid.

Precautionary Statements
General:
Keep out of reach of children.

Prevention:
Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
Wear protective gloves and eye/face protection.

Response:
In case of fire: Use a fire fighting agent suitable for flammable liquids such as dry chemical or carbon dioxide to
extinguish.

Storage:
Store in a well-ventilated place. Keep cool.

Disposal:
Dispose of contents/container in accordance with applicable local/regional/national/international regulations.

1% of the mixture consists of ingredients of unknown acute oral toxicity.

1% of the mixture consists of ingredients of unknown acute dermal toxicity.
1% of the mixture consists of ingredients of unknown acute inhalation toxicity.

SECTION 3: Composition/information on ingredients

Ingredient C.A.S. No. % by Wt
Non-Hazardous Ingredients 7732-18-5 40 - 60 Trade Secret *
Dearomatized Alkanes 64742-48-9 < 20 Trade Secret *
Alumina 1344-28-1 5 - 15 Trade Secret *
Light Aromatic Hydrocarbons 64742-47-8 1 - 10 Trade Secret *
Glycerin 56-81-5 1 - 5 Trade Secret *
Mineral Oil 8042-47-5 1 - 5 Trade Secret *
Plant Oil Trade Secret* 1 - 5 Trade Secret *
Triethanolamine 102-71-6 0.5 - 1.5 Trade Secret *
Alkyloammonium Salt Trade Secret* <= 1 Trade Secret *

*The specific chemical identity and/or exact percentage (concentration) of this composition has been withheld as a trade
secret.

SECTION 4: First aid measures

4.1. Description of first aid measures

Inhalation:
Remove person to fresh air. If you feel unwell, get medical attention.

Page 2 of 11
Mirror Glaze® Pro Speed Compound (Professional) M100 [M10001 M10032] 05/18/20

Skin Contact:
Wash with soap and water. If signs/symptoms develop, get medical attention.

Eye Contact:
Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist,
get medical attention.

If Swallowed:
Rinse mouth. If you feel unwell, get medical attention.

4.2. Most important symptoms and effects, both acute and delayed
See Section 11.1. Information on toxicological effects.

4.3. Indication of any immediate medical attention and special treatment required
Not applicable

SECTION 5: Fire-fighting measures

5.1. Suitable extinguishing media
In case of fire: Use a fire fighting agent suitable for flammable liquids such as dry chemical or carbon dioxide to extinguish.

5.2. Special hazards arising from the substance or mixture

Closed containers exposed to heat from fire may build pressure and explode. None inherent in this product.

Hazardous Decomposition or By-Products

Substance Condition
Hydrocarbons During Combustion
Carbon monoxide During Combustion
Carbon dioxide During Combustion
Irritant Vapors or Gases During Combustion
Oxides of Nitrogen During Combustion

5.3. Special protective actions for fire-fighters

Water may not effectively extinguish fire; however, it should be used to keep fire-exposed containers and surfaces cool and
prevent explosive rupture. Wear full protective clothing, including helmet, self-contained, positive pressure or pressure
demand breathing apparatus, bunker coat and pants, bands around arms, waist and legs, face mask, and protective covering
for exposed areas of the head.

SECTION 6: Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures
Evacuate area. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Use only non-sparking tools.
Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or
exhaust vapors, in accordance with good industrial hygiene practice. Warning! A motor could be an ignition source and
could cause flammable gases or vapors in the spill area to burn or explode. Refer to other sections of this SDS for
information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment.

6.2. Environmental precautions

Avoid release to the environment. For larger spills, cover drains and build dikes to prevent entry into sewer systems or
bodies of water.

6.3. Methods and material for containment and cleaning up

Contain spill. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially
available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent
material does not remove a physical, health, or environmental hazard. Collect as much of the spilled material as possible

Page 3 of 11
 Mirror Glaze® Pro Speed Compound (Professional) M100 [M10001 M10032] 05/18/20

using non-sparking tools. Place in a closed container approved for transportation by appropriate authorities. Clean up
residue with detergent and water. Seal the container. Dispose of collected material as soon as possible in accordance with
applicable local/regional/national/international regulations.

SECTION 7: Handling and storage

7.1. Precautions for safe handling
Do not use in a confined area with minimal air exchange. Keep out of reach of children. Keep away from heat/sparks/open
flames/hot surfaces. - No smoking. Avoid breathing dust/fume/gas/mist/vapors/spray. Do not eat, drink or smoke when
using this product. Wash thoroughly after handling. Avoid release to the environment. Avoid contact with oxidizing
agents (eg. chlorine, chromic acid etc.)

7.2. Conditions for safe storage including any incompatibilities

Store in a well-ventilated place. Keep cool. Store away from heat. Store away from acids. Store away from strong
bases. Store away from oxidizing agents.

SECTION 8: Exposure controls/personal protection

8.1. Control parameters

Occupational exposure limits

If a component is disclosed in section 3 but does not appear in the table below, an occupational exposure limit is not available
for the component.
Ingredient C.A.S. No. Agency Limit type Additional Comments
Triethanolamine 102-71-6 ACGIH TWA:5 mg/m3
Alumina 1344-28-1 OSHA TWA(as total dust):15
mg/m3;TWA(respirable
fraction):5 mg/m3
Aluminum, insoluble compounds 1344-28-1 ACGIH TWA(respirable fraction):1 A4: Not class. as human
mg/m3 carcin
Glycerin 56-81-5 OSHA TWA(as total dust):15
mg/m3;TWA(respirable
fraction):5 mg/m3
Kerosine (petroleum) 64742-47-8 ACGIH TWA(as total hydrocarbon A3: Confirmed animal
vapor, non-aerosol):200 carcin., SKIN
mg/m3
MINERAL OILS, HIGHLY- 8042-47-5 ACGIH TWA(inhalable fraction):5 A4: Not class. as human
REFINED OILS mg/m3 carcin
Paraffin oil 8042-47-5 OSHA TWA(as mist):5 mg/m3
ACGIH : American Conference of Governmental Industrial Hygienists
AIHA : American Industrial Hygiene Association
CMRG : Chemical Manufacturer's Recommended Guidelines
OSHA : United States Department of Labor - Occupational Safety and Health Administration
TWA: Time-Weighted-Average
STEL: Short Term Exposure Limit
CEIL: Ceiling

8.2. Exposure controls

8.2.1. Engineering controls

Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure
Limits and/or control dust/fume/gas/mist/vapors/spray. If ventilation is not adequate, use respiratory protection equipment.

8.2.2. Personal protective equipment (PPE)

Eye/face protection

Page 4 of 11
Mirror Glaze® Pro Speed Compound (Professional) M100 [M10001 M10032] 05/18/20

Select and use eye/face protection to prevent contact based on the results of an exposure assessment. The following eye/face
protection(s) are recommended:
Safety Glasses with side shields

Skin/hand protection
Select and use gloves and/or protective clothing approved to relevant local standards to prevent skin contact based on the
results of an exposure assessment. Selection should be based on use factors such as exposure levels, concentration of the
substance or mixture, frequency and duration, physical challenges such as temperature extremes, and other use conditions.
Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible gloves/protective
clothing. Note: Nitrile gloves may be worn over polymer laminate gloves to improve dexterity.
Gloves made from the following material(s) are recommended: Polymer laminate

When only incidental contact is anticipated, alternative glove material(s) may be used. If contact with the glove does occur,
remove immediately and replace with a set of new gloves. For incidental contact, gloves made of the following material(s)
may be used:Nitrile Rubber

Respiratory protection

An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part
of a full respiratory protection program. Based on the results of the exposure assessment, select from the following
respirator type(s) to reduce inhalation exposure:
Half facepiece or full facepiece air-purifying respirator suitable for organic vapors and particulates

For questions about suitability for a specific application, consult with your respirator manufacturer.

SECTION 9: Physical and chemical properties

9.1. Information on basic physical and chemical properties
Appearance
Physical state Liquid
Color Milky Blue

Odor Mild Acidic

Odor threshold No Data Available
pH 8.4 - 8.9
Melting point No Data Available
Boiling Point 212 ºC
Flash Point > 93 ºC [Test Method:Closed Cup]
Evaporation rate No Data Available
Flammability (solid, gas) Not Applicable
Flammable Limits(LEL) No Data Available
Flammable Limits(UEL) No Data Available
Vapor Pressure No Data Available
Vapor Density No Data Available
Density 1.01 g/ml
Specific Gravity 1.01 [Ref Std:WATER=1]
Solubility in Water Moderate
Solubility- non-water No Data Available
Partition coefficient: n-octanol/ water No Data Available
Autoignition temperature No Data Available
Decomposition temperature No Data Available
Viscosity >=100 centipoise
Molecular weight No Data Available
Volatile Organic Compounds 17 % weight

Page 5 of 11
Mirror Glaze® Pro Speed Compound (Professional) M100 [M10001 M10032] 05/18/20

SECTION 10: Stability and reactivity

10.1. Reactivity
This material is considered to be non reactive under normal use conditions.

10.2. Chemical stability

Stable.

10.3. Possibility of hazardous reactions

Hazardous polymerization will not occur.

10.4. Conditions to avoid

Heat

10.5. Incompatible materials

Strong acids
Strong bases
Strong oxidizing agents

10.6. Hazardous decomposition products

Substance Condition
None known.

Refer to section 5.2 for hazardous decomposition products during combustion.

SECTION 11: Toxicological information

The information below may not be consistent with the material classification in Section 2 if specific ingredient
classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be
reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be
present below the threshold for labeling, an ingredient may not be available for exposure, or the data may not be
relevant to the material as a whole.

11.1. Information on Toxicological effects

Signs and Symptoms of Exposure

Based on test data and/or information on the components, this material may produce the following health effects:

Inhalation:
Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose
and throat pain.

Skin Contact:
Mild Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness.

Eye Contact:
Dust created by cutting, grinding, sanding, or machining may cause eye irritation. Signs/symptoms may include redness,
swelling, pain, tearing, and blurred or hazy vision.

Ingestion:
Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea.

Page 6 of 11
Mirror Glaze® Pro Speed Compound (Professional) M100 [M10001 M10032] 05/18/20

Toxicological Data
If a component is disclosed in section 3 but does not appear in a table below, either no data are available for that endpoint or
the data are not sufficient for classification.

Acute Toxicity
Name Route Species Value
Overall product Dermal No data available; calculated ATE >5,000 mg/kg
Overall product Inhalation- No data available; calculated ATE >50 mg/l
Vapor(4 hr)
Overall product Ingestion No data available; calculated ATE >5,000 mg/kg
Dearomatized Alkanes Inhalation- Professio LC50 estimated to be 20 - 50 mg/l
Vapor nal
judgeme
nt
Dearomatized Alkanes Dermal Rabbit LD50 > 5,000 mg/kg
Dearomatized Alkanes Ingestion Rat LD50 > 5,000 mg/kg
Alumina Dermal LD50 estimated to be > 5,000 mg/kg
Alumina Inhalation- Rat LC50 > 2.3 mg/l
Dust/Mist
(4 hours)
Alumina Ingestion Rat LD50 > 5,000 mg/kg
Light Aromatic Hydrocarbons Inhalation- Professio LC50 estimated to be 20 - 50 mg/l
Vapor nal
judgeme
nt
Light Aromatic Hydrocarbons Dermal Rabbit LD50 > 5,000 mg/kg
Light Aromatic Hydrocarbons Ingestion Rat LD50 > 5,000 mg/kg
Mineral Oil Dermal Rabbit LD50 > 2,000 mg/kg
Mineral Oil Ingestion Rat LD50 > 5,000 mg/kg
Glycerin Dermal Rabbit LD50 estimated to be > 5,000 mg/kg
Glycerin Ingestion Rat LD50 > 5,000 mg/kg
Plant Oil Dermal LD50 estimated to be > 5,000
Plant Oil Ingestion LD50 estimated to be > 5,000
Triethanolamine Dermal Rabbit LD50 > 2,000 mg/kg
Triethanolamine Ingestion Rat LD50 9,000 mg/kg
ATE = acute toxicity estimate

Skin Corrosion/Irritation
Name Species Value

Dearomatized Alkanes Rabbit Mild irritant

Alumina Rabbit No significant irritation
Light Aromatic Hydrocarbons Rabbit Minimal irritation
Mineral Oil Rabbit No significant irritation
Glycerin Rabbit No significant irritation
Plant Oil Human Minimal irritation
Triethanolamine Rabbit Minimal irritation

Serious Eye Damage/Irritation

Name Species Value

Dearomatized Alkanes Rabbit Mild irritant

Alumina Rabbit No significant irritation
Light Aromatic Hydrocarbons Rabbit Mild irritant
Mineral Oil Rabbit Mild irritant
Glycerin Rabbit No significant irritation
Plant Oil Rabbit Mild irritant
Triethanolamine Rabbit Mild irritant

Skin Sensitization
Name Species Value

Page 7 of 11
Mirror Glaze® Pro Speed Compound (Professional) M100 [M10001 M10032] 05/18/20

Dearomatized Alkanes Guinea Not classified

pig
Light Aromatic Hydrocarbons Guinea Not classified
pig
Mineral Oil Guinea Not classified
pig
Glycerin Guinea Not classified
pig
Plant Oil Human Not classified
Triethanolamine Human Not classified

Respiratory Sensitization
For the component/components, either no data are currently available or the data are not sufficient for classification.

Germ Cell Mutagenicity

Name Route Value

Dearomatized Alkanes In Vitro Not mutagenic

Dearomatized Alkanes In vivo Not mutagenic
Alumina In Vitro Not mutagenic
Light Aromatic Hydrocarbons In Vitro Not mutagenic
Light Aromatic Hydrocarbons In vivo Not mutagenic
Mineral Oil In Vitro Not mutagenic
Plant Oil In Vitro Not mutagenic
Plant Oil In vivo Not mutagenic
Triethanolamine In Vitro Not mutagenic
Triethanolamine In vivo Not mutagenic

Carcinogenicity
Name Route Species Value
Dearomatized Alkanes Not Not Not carcinogenic
Specified available
Alumina Inhalation Rat Not carcinogenic
Light Aromatic Hydrocarbons Not Not Not carcinogenic
Specified available
Mineral Oil Dermal Mouse Not carcinogenic
Mineral Oil Inhalation Multiple Not carcinogenic
animal
species
Glycerin Ingestion Mouse Some positive data exist, but the data are not
sufficient for classification
Triethanolamine Dermal Multiple Not carcinogenic
animal
species
Triethanolamine Ingestion Mouse Some positive data exist, but the data are not
sufficient for classification

Reproductive Toxicity

Reproductive and/or Developmental Effects

Name Route Value Species Test Result Exposure
Duration
Dearomatized Alkanes Not Not classified for female reproduction Rat NOAEL Not premating &
Specified available during
gestation
Dearomatized Alkanes Not Not classified for male reproduction Rat NOAEL Not 28 days
Specified available
Dearomatized Alkanes Not Not classified for development Rat NOAEL Not during
Specified available gestation
Light Aromatic Hydrocarbons Not Not classified for female reproduction Rat NOAEL Not 1 generation
Specified available
Light Aromatic Hydrocarbons Not Not classified for male reproduction Rat NOAEL Not 1 generation
Specified available

Page 8 of 11
Mirror Glaze® Pro Speed Compound (Professional) M100 [M10001 M10032] 05/18/20

Light Aromatic Hydrocarbons Not Not classified for development Rat NOAEL Not 1 generation
Specified available
Mineral Oil Ingestion Not classified for female reproduction Rat NOAEL 4,350 13 weeks
mg/kg/day
Mineral Oil Ingestion Not classified for male reproduction Rat NOAEL 4,350 13 weeks
mg/kg/day
Mineral Oil Ingestion Not classified for development Rat NOAEL 4,350 during
mg/kg/day gestation
Glycerin Ingestion Not classified for female reproduction Rat NOAEL 2,000 2 generation
mg/kg/day
Glycerin Ingestion Not classified for male reproduction Rat NOAEL 2,000 2 generation
mg/kg/day
Glycerin Ingestion Not classified for development Rat NOAEL 2,000 2 generation
mg/kg/day
Triethanolamine Ingestion Not classified for development Mouse NOAEL 1,125 during
mg/kg/day organogenesi
s

Target Organ(s)

Specific Target Organ Toxicity - single exposure

For the component/components, either no data are currently available or the data are not sufficient for classification.

Specific Target Organ Toxicity - repeated exposure

Name Route Target Organ(s) Value Species Test Result Exposure
Duration
Alumina Inhalation pneumoconiosis Some positive data exist, but the Human NOAEL Not occupational
data are not sufficient for available exposure
classification
Alumina Inhalation pulmonary fibrosis Not classified Human NOAEL Not occupational
available exposure
Mineral Oil Ingestion hematopoietic Not classified Rat NOAEL 90 days
system 1,381
mg/kg/day
Mineral Oil Ingestion liver | immune Not classified Rat NOAEL 90 days
system 1,336
mg/kg/day
Glycerin Inhalation respiratory system | Not classified Rat NOAEL 3.91 14 days
heart | liver | kidney mg/l
and/or bladder
Glycerin Ingestion endocrine system | Not classified Rat NOAEL 2 years
hematopoietic 10,000
system | liver | mg/kg/day
kidney and/or
bladder
Plant Oil Ingestion heart | Not classified Rat NOAEL 13 weeks
hematopoietic 4,800
system | liver mg/kg/day
Plant Oil Ingestion kidney and/or Not classified Mouse NOAEL 13 weeks
bladder 13,000
mg/kg/day
Triethanolamine Dermal kidney and/or Not classified Multiple NOAEL 2 years
bladder animal 2,000
species mg/kg/day
Triethanolamine Dermal liver Not classified Mouse NOAEL 13 weeks
4,000
mg/kg/day
Triethanolamine Ingestion kidney and/or Some positive data exist, but the Rat LOAEL 2 years
bladder data are not sufficient for 1,000
classification mg/kg/day
Triethanolamine Ingestion liver Not classified Guinea NOAEL 24 weeks
pig 1,600
mg/kg/day

Aspiration Hazard

Page 9 of 11
 Mirror Glaze® Pro Speed Compound (Professional) M100 [M10001 M10032] 05/18/20

Name Value
Dearomatized Alkanes Aspiration hazard
Light Aromatic Hydrocarbons Aspiration hazard
Mineral Oil Aspiration hazard

Please contact the address or phone number listed on the first page of the SDS for additional toxicological information
on this material and/or its components.

SECTION 12: Ecological information

Ecotoxicological information
Please contact the address or phone number listed on the first page of the SDS for additional ecotoxicological information on this material
and/or its components.
Chemical fate information
Please contact the address or phone number listed on the first page of the SDS for additional chemical fate information on this material
and/or its components.

SECTION 13: Disposal considerations

13.1. Disposal methods
Dispose of contents/ container in accordance with the local/regional/national/international regulations.

Dispose of waste product in a permitted industrial waste facility. As a disposal alternative, incinerate in a permitted waste
incineration facility. Proper destruction may require the use of additional fuel during incineration processes. Empty
drums/barrels/containers used for transporting and handling hazardous chemicals (chemical substances/mixtures/preparations
classified as Hazardous as per applicable regulations) shall be considered, stored, treated & disposed of as hazardous wastes
unless otherwise defined by applicable waste regulations. Consult with the respective regulating authorities to determine the
available treatment and disposal facilities.

SECTION 14: Transport Information

General Transportation Statement: This product does not require classification by DOT, IATA, ICAO or IMDG.

Please contact the emergency numbers listed on the first page of the SDS for Transportation Information for this material.

SECTION 15: Regulatory information

15.1. US Federal Regulations

Contact manufacturer for more information

EPCRA 311/312 Hazard Classifications:

Physical Hazards
Flammable (gases, aerosols, liquids, or solids)

Health Hazards
Not applicable

15.2. State Regulations

Contact manufacturer for more information

Page 10 of 11
Mirror Glaze® Pro Speed Compound (Professional) M100 [M10001 M10032] 05/18/20

15.3. Chemical Inventories

The components of this product are in compliance with the chemical notification requirements of TSCA. All required
components of this product are listed on the active portion of the TSCA Inventory.

Contact manufacturer for more information

15.4. International Regulations

Contact manufacturer for more information

This SDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.

SECTION 16: Other information

NFPA Hazard Classification
Health: 1 Flammability: 2 Instability: 0 Special Hazards: None

National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address
the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar
emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include
the toxic properties of combustion or decomposition products that are known to be generated in significant quantities.

Document Group: 31-3490-5 Version Number: 4.04

Issue Date: 05/18/20 Supercedes Date: 12/17/19

DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued. Meguiar's Inc.
MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF
PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the Meguiar's Inc. product is fit for
a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use
and application of a Meguiar's Inc. product, some of which are uniquely within the user's knowledge and control, it is
essential that the user evaluate the Meguiar's Inc. product to determine whether it is fit for a particular purpose and suitable
for user's method of use or application.

Meguiar's Inc. provides information in electronic form as a service to its customers. Due to the remote possibility that
electronic transfer may have resulted in errors, omissions or alterations in this information, Meguiar's Inc. makes no
representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as
the information in the SDS available directly from Meguiar's Inc.

Meguiar's, Inc. USA SDSs are available at www.Meguiars.com

Page 11 of 11