ISBN 978-0-626-31998-4
SANS 252:2003
Edition 1
SOUTH AFRICAN NATIONAL STANDARD
Metallic hose assemblies for liquid petroleum
gases and liquefied natural gases
This national standard is the identical implementation of BS 4089:1999,
and is adopted with the permission of British Standards Publishing Ltd.
Published by SABS Standards Division
1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001
Tel: +27 12 428 7911 Fax: +27 12 344 1568
www.sabs.co.za
SABS
SANS 252:2003
Edition 1
Table of changes
Change No. Date Scope
National foreword
This South African standard was approved by National Committee SABS/TC 1019, Gas supply,
handling and control (fuel, industrial and medical gases), in accordance with procedures of the
SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement.
Reaffirmed and reprinted in 2015.
This document will be reviewed every five years
and be reaffirmed, amended, revised or withdrawn.
© SABS
SANS 252:2003
SANS 252:2003
SANS 252:2003
SANS 252:2003
SANS 252:2003
SANS 252:2003
SANS 252:2003
SANS 252:2003
SANS 252:2003
This page has been left blank intentionally
SABS Standards Division
The objective of the SABS Standards Division is to develop, promote and maintain South African
National Standards. This objective is incorporated in the Standards Act, 2008 (Act No. 8 of 2008).
Amendments and Revisions
South African National Standards are updated by amendment or revision. Users of South African
National Standards should ensure that they possess the latest amendments or editions.
The SABS continuously strives to improve the quality of its products and services and would
therefore be grateful if anyone finding an inaccuracy or ambiguity while using this standard would
inform the secretary of the technical committee responsible, the identity of which can be found in
the foreword.
The SABS offers an individual notification service, which ensures that subscribers automatically
receive notification regarding amendments and revisions to South African National Standards.
Tel: +27 (0) 12 428 6883 Fax: +27 (0) 12 428 6928 E-mail: [email protected]
Buying Standards
Contact the Sales Office for South African and international standards, which are available in both
electronic and hard copy format.
Tel: +27 (0) 12 428 6883 Fax: +27 (0) 12 428 6928 E-mail: [email protected]
South African National Standards are also available online from the SABS website
http://www.sabs.co.za
Information on Standards
The Standards Information Centre provides a wide range of standards-related information on both
national and international standards. The Centre also offers an individual updating service called
INFOPLUS, which ensures that subscribers automatically receive notification regarding
amendments to, and revisions of, international standards.
Tel: +27 (0) 12 428 7911 / 0861 27 7227 Fax: +27 (0) 12 428 6928 E-mail: [email protected]
Copyright
The copyright in a South African National Standard or any other publication published by the SABS
Standards Division vests in the SABS or, in the case of a South African National Standard based on
an international standard, in the organization from which the SABS adopted the standard under
licence or membership agreement. In the latter case, the SABS has the obligation to protect such
copyright. Unless exemption has been granted, no extract may be reproduced, stored in a retrieval
system or transmitted in any form or by any means without prior written permission from the SABS
Standards Division. This does not preclude the free use, in the course of implementing the
standard, of necessary details such as symbols, and size, type or grade designations. If these
details are to be used for any purpose other than implementation, prior written permission must be
obtained.
Details and advice can be obtained from the Manager Standards Sales and Information Services.
Tel: +27 (0) 12 428 6883 Fax: +27 (0) 12 428 6928 E-mail: [email protected]
