19/08/25
3370571
437682-3-1
NOTE:
all steel structure will be erected in the site by
specialest steel contracter (G+1) approved
by DM
PLOT 3370571
ZONE ZABEEL 2 DUBAI
PHASE GA CP SP
DATE OCTOBER - 2024
10.000
VARIABLE
1. THIS DRAWING IS THE PROPERTY OF ALOFOQ ENGINEERING CONSULTANTS ,
0.640 0.640
0.640 0.640
8 ITS COPYRIGHT IS RESERVED WITH THEM. IT MUST NOT BE RETAINED,
1.800
COPIED OR REPRODUCED IN ANY FORM WITHOUT THE WRITTEN CONSENT OF ALOFOQ
2. ALL DIMENSIONS ARE IN MILLIMETERS AND LEVELS IN METERS UNLESS NOTED
OTHERWISE. DO NOT SCALE DRAWING, ONLY WRITTEN DIMENSIONS ARE TO BE
FOLLOWED. IMPERIAL DIMENSIONS ARE APPROXIMATE.
0.960
0.960
3. ALL DIMENSIONS TO BE VERIFIED BY THE CONTRACTOR AND DISCREPANCIES, IF ANY,
REPORTED TO THE CONSULTANT BEFORE COMMENCING ANY WORK ON SITE.
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH RELEVANT ARCHITECTURAL,
STRUCTURAL AND SERVICES DRAWINGS; SPECIFICATIONS AND DETAILS.
0.960
0.960
5. ALL MATERIALS SHOULD BE APPROVED BY THE CONSULTANT.
6. DO NOT COVER ANY INTERNAL EXECUTION WORKS BEFORE CHECKED AND APPROVED
BY THE CONSULTANT.
0.960
0.960
8.000
8.000
8.000
7. DO NOT COMMENCE THE WORK UNLESS THE DRAWING IS ISSUED FOR CONSTRUCTION
OR STAMPED BY RELATED AUTHORITIES.
5.400
0.960
0.960
8. CONTRACTOR SHOULD SUBMIT THE SHOP DRAWING FOR APPROVAL.
9. EXAMINE THE DRAWINGS CAREFULLY BEFORE COMMENCING THE WORK.
IF ANY DISCREPANCIES FOUND, REPORT TO THE CONSULTANT AND OBTAIN
CLARIFICATIONS OR ADDITIONAL INSTRUCTIONS BEFORE PROCEEDING.
0.960
0.960
10. ALL PLANS, DRAWINGS,GRAPHIC REPRESENTATIONS, AND SPECIFICATIONS
PREPARED BY THE CONSULTANT ARE INSTRUMENTS OF SERVICE FOR CARRING
OUT A PROJECT.
0.960
0.960
11. COPY RIGHT FOR THESE PLANS,SKETCHES, DRAWINGS,GRAPHIC REPRESENTATIONS
AND SPECIFICATIONS SHOULD NOT BE USED FOR ANY OTHER PROJECT WITHOUT
THE WRITTEN CONSENT OF THE CONSULTANT.VIOLATION OF ABOVE
WILL TAKE INTO LEGAL ACTION.
0.960
0.960
1 8
16.000
16.000
8.000
8.000
REVISED
PURPOSE OF ISSUE Rev Date Authorised
1.500
1.500
GROUND LEVEL ADD 1 UNIPOLE WITH
2 FACE SIGN BOARD (10.00M x 8.00M)
2.400 2.400
POWER MEDIA
UNIPOLE ELEVATION UNIPOLE SECTION A-A
ةيسدنهلاتاراشتساللقفألا
AL OFOQ ENGINEERING CONSULTANTS
ARCHITECTS DESIGN CONSULTANCY ,INTERIOR DESIGN
CONSTRUCTION ENGINEERING SERVICES
P.O.BOX90620 ,Dubai,United Arab Emirates
TEL:+97142885120 ,FAX:
+97142885150
WWW.ALOFOQENGINEERING.COM
AL OFOQ
UNIPOLE ELEVATION AND SECTION
ARCHITECTURAL STUCTURAL MEP SIZE:
SHADI HABASH SHERIN JITHINT CHACKO
ORIGINAL SCALE:
7236 114403290 -
1/100 A1
DRAWING NUMBER : REVISION:
A-102p
