Product Selection Guidea

MODIFICATION
MASTERBATCH

COMPOUND

EMULSIONS

COATINGS

PVC LUBE
POWDER DROP VISCOSITY MELT ACID

ASPHALT

CARPET
TYPE GRADE DENSITY

INKS &
HMA

WAX
VERSION POINT (g/cm3) INDEX NUMBER
(C°) 125°C 140°C 190°C @ 190°C (mg-KOH/g)
(cP) (cP) (cP) (g/10min)
C-10 103 0.906 18,600 16,650 3,550 2,250 -     
C-12 118 0.907 212,000 125,000 31,400 400 -  
C-13 • 137 0.913 - - - 190 -     
C-15 101 0.906 8,950 6,100 1,800 4,200 -    
C-16 • 103 0.908 16,650 10,000 2,850 1,700 2      
C-Types:
C-17 >133 0.917 - - - 19 -  
Coating Grades
C-18 101 0.905 7,750 5,000 1,550 4,200 2 
C-23 • 108 0.909 - 785,000 180,000 80 -  
C-24 0.912 - - - 58 -  
C-26 133 0.917 - - - 8 8 
C-29 105 0.915 700 - - - 4    
N-10 • 110 0.925 1,500 1,100 - - -  
N-11 • 111 0.921 350 250 - - -   
N-14 • 108 0.920 150 100 - - -    
N-Types:
N-15 • 164 0.902 -d -d 700 - -  
Non-Emulsifiable
N-21 • 121 0.950 600 400 - - -     
Grades
N-30 110 0.924 1,050 700 - - - 
N-34 • 104 0.910 450 300 - - -    
N-35 104 0.913 700 - - - - 
E-10 105 0.942 800 525 - - 17  
E-14 • 104 0.939 375 260 - - 17   
E-Types: E-14E 104 0.939 225 160 - - 17 
Emulsifiable Grades E-16 105 0.943 700 500 - - 17 
E-20 • 112 0.960 1,500 900 - - 17    
EE-2 112 0.960 1,500 900 - - 17  
E-Types:
Emulsifiable PP E-43 • 160 0.934 -d -d 300 - 45     
Grades
 Suggested b  Applicable c

a. This document is intended to be used as general guidance for product usage. It does b. “Suggested” indicates that the grade is commonly used in the respective application.
not guarantee a Suggested or Applicable grade will work in your specific application. c. “Applicable” indicates that the grade can generally be used in the respective application.
Please work with our technical team to determine a product solution that meets your needs. d. Solid at this temperature

Westlake.com
 Enhancing your life every day ®

Contact us today to learn more about our products and capabilities,

Westlake Polymers LLC

Get connected: Westlake.com

ELEVATE®, EPOLENE®, ENERGX®, EMAC®, EMAC+®, EBAC®, EBAC+®, HIFOR®, HIFOR Clear ®, HIFOR Xtreme ®, MXSTEN ®, PIVOTAL®, STEP UP ®,
TRUCOAT®, TYMAX® and Westlake are trademarks of Westlake Polymers. All Westlake Polymers’ products are sold pursuant to Westlake Polymers’
standard terms and conditions of sales which are available upon request and Westlake Polymers makes no other warranties either expressed or Printed using
implied, including but not limited to the warranties of merchantability and fitness for particular purpose. recycled paper

© 2022 Westlake Polymers LLC | Publication Date: September 2022 | EXT-EPO-ProdSelect-09.22-Rev.1