CEPH BLOCK PHARMA FACILITY
BLOCK A
Ref. No. BOQ/CEPH/ELP/REV-0.1
ITEM DESCRIPTION UNIT QTY/LENGTH
1 MAIN POWER CABLES / LT PANEL / SMDBs
Supply, installation, laying, testing and commission of Main Circuits, armored CU/XLPE/SWA/PVC insulated stranded Copper Conductor
Cable 600/1000V Grade, single or multicore feeders , in pre-laid conduits/cable tray as specified including cost of all necessary
accessories, connections, termination kits, thimbles, shroud as required complete in all respects. All accessories and materials shall be
manufactured by any one of Approved manufacturers. Actual length of cables shall be measured at sitebefore order but tentative
quantities of cables are given.
3 x (1c X 185mm2) CU/XLPE/SWA/PVC + 1c X185mm2 PVC/ECC is use for Transformer to BUSBAR PANEL connections. (600-
1.1 Mtr 30
1000V)
1.2 3 x (1c X 185mm2) CU/XLPE/SWA/PVC + 1c X185mm2 PVC/ECC is use for ATS PANEL TO LT PANEL connections.(600-1000V) Mtr 5
1.3 4c X 630mm2 CU/XLPE/SWA/PVC + 1c x 50mm2 PVC/ECC LT PANEL to SMDB-BLOCK A .(600-1000V) Mtr 35
1.4 4c X 70mm2 CU/XLPE/SWA/PVC + 1c x 50mm2 PVC/ECC LT PANEL to SMDB-GF-MP .(600-1000V) Mtr 110
1.5 4c X 35mm2 CU/XLPE/SWA/PVC + 1c x 35mm2 PVC/ECC LT PANEL to SMDB-MECH-PUMPS .(600-1000V) Mtr 5
1.6 4c X 35mm2 CU/XLPE/SWA/PVC + 1c x 25mm2 PVC/ECC LT PANEL to SMDB-RT-HVAC.(600-1000V) Roof Top Mtr 40
1.7 4c X 6mm2 CU/XLPE/SWA/PVC + 1c x 6mm2 PVC/ECC LT PANEL to SMDB-MISC .(600-1000V) Mtr 35
3 x (1c X 185mm2 ) CU/XLPE/SWA/PVC + 1c X 185mm2 PVC/ECC is use From GENERATOR to ATS PANEL connections. (600-
1.8 Mtr 10
1000V)
DBs
LIGHTING CABLE
1.7 2C X 2.5 MM2 Mtr 1430
POWER CABLES
1.8 2C X 4 MM2 Mtr 1200
1.9 2C X 6 MM2 Mtr
1.1 2C X 10 MM2 Mtr 1240
1.11 2C X 16 MM2 Mtr 1266
1.12 2C X 25 MM2 Mtr 50
3 PHASE DEDICATED WIRING FOR 3 PHASE HEAVY MACHINES
1.13 4C X 2.5 MM2 Mtr 20
1.14 4C X 4 MM2 Mtr 20
1.15 4C X 16 MM2 Mtr 1100
1.16 4C X 25 MM2 Mtr 700
1.17 4C X 35 MM2 Mtr 700
2.0 POWER CABLES FOR SUB MAIN CIRCUITS
Supply, installation, laying, testing and commission of Sub-Main Circuits, un-armored CU/XPLE/PVC or CU/PVC insulated stranded
Copper Conductor Cable 600/1000V Grade, single or multicore feeders , inpre-laid conduits/cable tray as specified including cost of all
necessary accessories, connections, termination kits, thimbles, shroud as required complete in all respects.All accessories and materials
shall be manufactured by any one of Approved manufacturers. Actual length of cables shall be measured at sitebefore order but tentative
quantities of cables are given.
4c X 25mm2 CU/PVC/PVC+ 1C X 16 mm2 PVC/ECC is use for SMDB-BLOCK A TO DB-GF-LP-Z1 (ELV/ESC).(600-
2.1 Mtr 3
1000V)
4c X 150mm2 CU/PVC/PVC+ 1C X 70 mm2 PVC/ECC is use for SMDB-BLOCK A TO DB-GF-LP-Z2 (ELV/ESC).(600-
2.2 Mtr 3
1000V)
4c X 50mm2 CU/PVC/PVC+ 1C X 25 mm2 PVC/ECC is use for SMDB-BLOCK A TO DB-GF-HL-Z1 (ELV/ESC).(600-
2.3 Mtr 3
1000V)
4c X 35mm2 CU/PVC/PVC+ 1C X 16 mm2 PVC/ECC is use for SMDB-BLOCK A TO DB-GF-HL-Z2 (ELV/ESC).(600-
2.4 Mtr 3
1000V)
8 X (4c X 25mm2) CU/PVC/PVC+ 1C X 10 mm2 PVC/ECC is use for SMDBGF-HVAC TO AHU UNITS (ELV/ESC).
2.5 Mtr location not defined
(600-1000V)
CEPH BLOCK PHARMA FACILITY
BLOCK A
Ref. No. BOQ/CEPH/ELP/REV-0.1
2.6 2C X 4 mm2 CU/PVC +1 x 4mm2 CU/PVC(Y/G) FROM SMDB-MISC TO DB-GF-PA Mtr 3
2.7 2C X 4 mm2 CU/PVC +1 x 4mm2 CU/PVC(Y/G) FROM SMDB-MISC TO DB-GF-PA Mtr 3
CEPH BLOCK PHARMA FACILITY
BLOCK A
Ref. No. BOQ/CEPH/ELP/REV-0.1
3 FIRE RATED CABLES/LSZH FIREFIGHTING PUMPS
Supply, installation, laying, testing and commission of Sub-Main Circuits, un-armored CU/LSZH/LSZH or CU/LSZH insulated stranded
Copper Conductor Cable 600/1000V Grade, single or multicore feeders , inpre-laid conduits/cable tray as specified including cost of all
necessary accessories, connections, termination kits, thimbles, shroud as required complete in all respects.Cables use for fire fighting
pumps is fire rated.All accessories and materials shall be manufactured by any one of Approved manufacturers. Actual length of cables
shall be measured at sitebefore order but tentative quantities of cables are given.
3.1 4c X 35mm2 CU/LSZH/LSZH +1c x 16mm2(CU/LSZH)(Y/G)s use for FIRE FIGHTING ELECTRIC PUMP FROM SMDB-GF-MP Mtr 35
3.2 4c X 25mm2 CU/LSZH/LSZH +1c x 10mm2(CU/LSZH)(Y/G)s use for jockey pump Mtr 35
4.0 WIRING / WIRING ACCESSORIES
Providing, installation, testing & commissioning of following items including all material, tools, labor & installation accessories like bends,
sockets, flexible conduit, porcelain connector, steelrope etc. required for completion of work as per specifications,details & drawings.
Complete in all respects.
5 EARTHING SYSTEM
Providing and Installation of 1½” dia & 10 ft long 16-SWG tin plated copper pipe filled with earth chemical to be lowered in 30 feet deep 4"
dia bore hole, complete with clamps from bottom and topof pipe rod to ground surface earth connecting point the pipe &bore hole to be
5.1 filled with earth chemical bags, complete with70mm2 stranded copper conductor from earth pipe to groundsurface in 1½" dia PVC pipe
with breather hole (length 5 feet only)with watering cap, earth access hole comprising of 8" dia, 12" deep16-SWG M.S. cylinder with 12-
SWG M.S. cover, both hot dippedgalvanized, as per detail shown in drawings for power.
5.1.1 Transformer Nos 1150KVA
5.1.2 LT Switch Boards Nos 1
5.1.3 Generators Nos 1
5.1.4 ATS PANEL Nos 1
Providing and Installation of 1½” dia & 10 ft long 16-SWG tin plated copper pipe filled with earth chemical to be loweredin 30 feet deep 4"
dia bore hole, complete with clamps from bottom and top of pipe rod to ground surface earth connecting point the pipe & bore hole to be
5.2 filled with earth chemical bags, complete with 35mm2 stranded copper conductor from earth pipe to ground surface in 1½" dia PVC pipe Nos
with breather hole (length 5 feet only) with watering cap, earth access hole comprising of 8" dia, 12" deep 16-SWG M.S.cylinder with 12-
SWG M.S. cover, both hot dipped galvanized,as per detail shown in drawings(for I.T).
6 Cables Trays
Supply and installation of perforated cable tray with cover detail as shown on drawings, to be installed on wall, or in vertical or in horizontal
position in electrical duct or in corridor or as shown on drawings and to the approval of the Engineer, including cost of bends, tees, joints,
all necessary fixing accessories nuts, bolts, washers and hanging arrangements with structural metal decking profile as specified or as per
site conditions and cable jumper on each joints including cost of antirust paint and powder coating on cable tray of approved color
complete in all respects. Cable tray shall be manufactured by any one of the approved manufacturer, complete in all respects.
6.1 8'' X 4''' Cable Tray with Cover ELECTRICAL ROOM Rft 10
6.2 6" x 2" Cable Tray with Cover MECHANICAL ROOM Rft 13
6.3 48" x 4" Cable Tray with Cover BLOCK A Rft 10
6.4 24" x 4" Cable Tray with Cover BLOCK A Rft 45
6.5 12" x 2" Cable Tray with Cover BLOCK A Rft 40
6.5 6" x 2" Cable Tray with Cover BLOCK A Rft 10
15 LIGHTING FIXTURES
Supply, installation, testing and commissioning of the following LEDlight fixtures of ambient temperature comprising of LED's of having life
span of more then 40,000 to 60,000 hours.
Ceiling Recessed LED Down light fixture 20 watt.
15.2 No. 255
LED smart panel light 40 W
15.4 No. 0
LED LINEAR LIGHT 40 W
15.7 No. 59
19 EARTHING, BONDING & LPS
CEPH BLOCK PHARMA FACILITY
BLOCK A
Ref. No. BOQ/CEPH/ELP/REV-0.1
Description of Work:-
Work includes providing all materials, equipment, accessories, services and tests necessary to complete and make ready for
operation, all system earthing, equipment earthing, earthing of outlets, special earthing for telecommunication, earthing of
raceways and conduits, earthing of distribution panelboards, transformers, HV switchgear ... etc., earth pits and accessories
work shall be in accordance with Drawings and Specifications and as required for a complete system.
Quality Assurance:-
Manufacturer's Qualifications: Firms regularly engaged in the manufacture of earthing products, of types, and ratings required,
and ancillary materials, including stranded cable, copper braid and bus and bonding jumpers whose products have been in
satisfactory use in similar service for not less than 5 years.
Standards Compliance: Comply with requirements of applicable local codes, DIN/VDE, BS 7430, IEC, NEC, UL and IEEE
Standards pertaining to electrical earthing circuitry and equipment. Provide earthing products which are labeled for their
intended usage.
Earthing Conductors:-
Earthing conductors connecting the main earthing terminal or bar and electrode system shall be green/yellow PVC insulated,
stranded copper cable. A minimum of two earthing conductors shall be installed and separately connected to the distribution
bus bars and test links main earth bar with bolted test links of copper and having a cross section as indicated on the drawings.
Supply & Installation of lightening arrestor comprising of early emission air terminal model AT-1560 (DC+60) to be installed on & including
mast comprising of 4 meter long 3.17mm thick, 75mmouter dia G.I. pipe having 16mm thick to be installed with wall including wall clamp, 3
19.1 Nos 0
Nos. stays of 6mm dia insulated wire rope, tensioners hooks etc, and all installation accessories as required as per site conditions,
complete in all respects as per specification and drawings.
19.2 95 MMSQ Bare copper stranded conductor run outside the wall of building 2 feet below ground and 3 feet away from the building wall. Mtr 145
19.3 70 MMSQ Bare Copper Down conductor in 32 MM dia pvc pipe to earth Mtr 30
19.4 50 MMSQ PVC insulated copper stranded conductor for connecting equalization bars at BLOCK A Mtr 100
19.5 32 MM dia PVC conduit Mtr 30
19.6 6 WAY Equalization earth bar of dimension 575 x100x90 (dual disconnecting link) NOS 40
19.7 25x3 MM Earth strip at parapet wall(207 FOOT) KG 0
20 EARTHING SYSTEM
Providing and Installation of 1½” dia & 10 ft long 16-SWG tin plated copper pipe filled with earth chemical to be lowered in 30 feet deep 4"
dia bore hole, complete with clamps from bottom and topof pipe rod to ground surface earth connecting point the pipe &bore hole to be
20.1 filled with earth chemical bags, complete with70mm2 stranded copper conductor from earth pipe to groundsurface in 1½" dia PVC pipe
with breather hole (length 5 feet only)with watering cap, earth access hole comprising of 8" dia, 12" deep16-SWG M.S. cylinder with 12-
SWG M.S. cover, both hot dippedgalvanized, as per detail shown in drawings for power.
20.2 Lightning Protection pits at ground floor Nos 0
21 FIREALARM SYSTEM
A Cables
Fire resistant multiple core SLC-Signaling Line Circuits Cable, twisted and shielded pair cable 2x1.5mm2 (16 AWG) 600/1000V into containment
including terminations and containment (if any), as per specification and drawings.
A.1 4C, 2.5 mm² MTR 620
B Cable Trays / Trunking /Ladders
Cable trays/Trunking / ladders including fittings, hangers, supports, fixings and necessary accessories, as per specification and drawings
PH BLOCK PHARMA FACILITY
BLOCK A
Ref. No. BOQ/CEPH/ELP/REV-0.1
Material Labour
TOTAL
Rate Amount Rate Amount
Power Earth
0
PH BLOCK PHARMA FACILITY
BLOCK A
Ref. No. BOQ/CEPH/ELP/REV-0.1
0
PH BLOCK PHARMA FACILITY
BLOCK A
Ref. No. BOQ/CEPH/ELP/REV-0.1
#VALUE!
0
PH BLOCK PHARMA FACILITY
BLOCK A
Ref. No. BOQ/CEPH/ELP/REV-0.1
22,500 0
1,850 268,250
1,570 47,100
1,420 142,000
380 11,400
5,800 232,000
2,220 0
#VALUE!
