How to make methamphetamine

Cannabisguru Other Drugs

5/5 (2 votes)

We are going to explain the entire process of how to cook methamphetamine with the

shake and bake method. It is a new method that has appeared

recently allows cooking methamphetamine with a two-liter bottle
liters.

Neither I, nor the translator, nor the publisher of this information takes responsibility.

responsible for your actions after reading this article. The material that there is
this article is purely educational and is published only and
exclusively for scientific curiosity. Since it is not published for
its use, the article may contain errors or imprecise indications that
although they do not alter their informational value, it could cause problems if
The process of cooking methamphetamine is attempted step by step.

The article is to inform the general public about the materials and the
method used by clandestine chemists to manufacture a substance
highly illegal. If you continue reading, you commit to not following the
steps indicated in this article and in case of doing so, you assume total
responsibility for any type of problems, damages or harm that
you may cause without the right to carry out, by you or by third parties
no legal or other type of claim against those who have written it,
translated or published.

That said, let's see how people can cook methamphetamine with
the methodshake and bakein a 12-step process. :-)
Introduction

This recipe allows you to cook REAL methamphetamine, unlike others.

recipes that circulate around that only make crank (methamphetamine)
low purity in powder form). This is not hypo (in English), it is
a hell of an ammonia drug. My system has been developed to be
fast and without generating as much smell as other methods. Neither
needs to go out there and start stealing anhydrous ammonia from the
farms. Even so, I only recommend cooking methamphetamine if you have
previous experience preparing drugs. The cleaning part is easy, everything
what you have to do is clean the bottles you have used and
get rid of everything when you are done.

This process should always be carried out outdoors and

never in an enclosed space.
Necessary material

1 two-liter bottle (with cap)

1 liter bottle (get two caps for this)
1 bottle of 600ml (with cap)
1 liter glass jar
1 rubber/plastic hose of 0.6cm in diameter (the hoses of
aquariums work well)
Coffee filters
1 funnel
1 pipe cutter
2 pliers
1 roll of packing tape or insulating tape
1 blender or food processor

Ingredients

200 pills of 60mg of Pseudoephedrine HCL (Actifed, Sudafed,

Suphedrine, etc.)
1.5 buckets of ammonium nitrate fertilizer (33-0-0)
3 bottles of starting liquid (ethyl ether or diethyl ether)
3 AA Energizer lithium batteries
500g of caustic soda (sodium hydroxide 99%)
2 bottle caps (you can use the caps from two-liter bottles)
1 box of iodized salt (salt with iodine)
1 bottle of pipe unclogger with sulfuric acid (Liquid Fire)
drain opener
Preparation

1.- Rinse and dry all the bottles. Make sure the bottles
they are completely dry and do not continue until you are sure that it
this

2.- Put your pills in the blender or food processor until

they turn to dust. Mix them with a cup and a half of fertilizer
ammonia. Use the funnel to put it in the two-liter bottle.

3.- Hold the three starting fluid cans upside down and keep
pressed the button until all the air has come out. Once the air
You should make a hole with a screwdriver or a can opener.
bottles at the bottom of the cans. Using the funnel, put the
liquid inside the two-liter bottle along with the mixture of pills and
ammonium nitrate.
Cut it. Be very careful not to cut beyond the cover.
metallic. If you damage the battery, it could overheat and catch fire.
Now with the pliers, hold each side of the battery and pull.
to the sides to remove the metal cover. Once you have
removed the metal cover, place the batteries in a hermetic location such as
a tupper or something similar. They can be stored for 3 hours. The lithium is
it will become very volatile if exposed to air or water moisture so
be careful and make sure that the container where you store the batteries
they are completely dry.

There are videos and articles on the internet that explain in more detail how
remove the lithium strips from the batteries.

5.- Start by unscrewing one of the batteries. The batteries will have two strips.
So make sure you don't use the wrong strip. The one that doesn't...
the one that has shiny metal on the edges is interesting. Divide the strip of lithium.
in small pieces and put them in the two-liter bottle. Do the same with
the other two batteries.

Lithium can start to heat up and can catch fire.

when exposed to air so use it quickly.
6.- Remove the cap from the bottle of caustic soda and fill it with the soda.
Use the funnel to put that soda into the two-liter bottle.

7.- Pour two bottle caps of water. Take the cap from the two-liter bottle,
fill with water and pour that water into the bottle. You must do this
do it twice. You would have to see small bubbles floating towards the
liquid surface. Put the cap on the bottle and move it a little to the side
to the side (but don't shake it!!)

8.- Now your drug is cooking. Every 5 minutes, loosen it a bit.

You will also have to be very attentive to the pressure of the bottle because
it could rapidly increase the pressure and the bottle could reach
explode if we don't ventilate it properly.

9.- You need to keep adding caustic soda or your methamphetamine will stop.
to cook. Every 20 minutes or so you should add another cap
of Sosa (use the cap from the bottle itself). Put the cap on the
two-liter bottle tightly closed and shake the bottle vigorously for
about 8 seconds. Loosen the cap, let the pressure release and the
methamphetamine will start to cook. Repeat it every 20 minutes. No
you will want to use more than two thirds of the bottle of caustic soda so what
you may need to adjust the amount you add or how often you add it
to continue doing for two hours.

10.- After two hours, your methamphetamine is cooked. Place the funnel.
in the one-liter bottle and put two coffee filters in the funnel. Now
pour the liquid from the two-liter bottle into the one-liter bottle
passing this liquid through the two coffee filters. Pour it slowly
little to ensure that the liquid does not pass outside of the filters. A
Once you have filled the one-liter bottle, you must put on the cap and leave it.
well sealed. If you let dirt or moisture enter the bottle, you
it will spoil the methamphetamine.
11.- Take the second cap from the one-liter bottle and the cap from the
600ml bottle and make a small hole large enough
to be able to pass the hose through them and ensure it fits tightly. Put
each end of the hose inside the hole of the plugs and
make sure to seal them using packing tape or tape
insulator. The tube must remain inside the liquid in the bottle of 1
liter.

12.- Remove the cap from the 1-liter bottle and put on the cap that it has.
connected the hose. Put the iodized salt inside the 600ml bottle
until it fills between 1 and 1.5 cm at the bottom. Take the cap from the
two-liter bottle or another cap of the same size and filled with it
drain unclogger. Pour the liquid together with the salt and screw it in
cap of the 600ml bottle keeping it tightly closed. Shake the bottle of
600ml from left to right for about 4 seconds. Squeeze the bottle.
and let it go once and sit down. Make sure the liquid does not reach the
The smoke will start to fill the 1-liter bottle. As the smoke begins
when entering the liquid, you will see how the goal starts to fall as if it were
snow at the bottom of the bottle with the liquid. When no more is generated
smoke, tie a knot in the hose so that no more smoke comes out of it
600ml bottle since it is bad and not advisable to breathe it in. Put the other one.
cap on the one-liter bottle and shake it vigorously for 30
seconds. Let the crystals settle. Place the funnel in the pitcher
with two new coffee filters and pass the liquid through the filters. A little of
methamphetamine will stay in the filters but the rest will remain in the
bottle. Cut the bottle in half and use a hairdryer to
Dry the crystal. You just need to separate the methamphetamine and it will be ready.

Remember that this process is very dangerous and we publish it in a way

merely informative and as a curiosity, you should not try to follow it.

You might also be interested in