WALL

Finish base
1. Wall of fired red brick 7x14x28 laid in a row with a compression strength
greater than 50 kg/cm2, joint of 1.5 cm settled with mortar-cement-sand in a ratio of 1:5,
four-legged at lead and level.

Initial Finish
1. Plastered to a standard with gray cement and sand in a 1:3 ratio, 5 cm thick (Installed in
wall of brick or concrete). Curved finish that will be achieved with the support of a flat surface and the ability
achieve that texture.
2. Plastering of scratched gypsum level, the thickness of the plastering shall not exceed 2 cm, the proportion
It will be 2 parts water and 3 parts plaster. (Placement on brick wall or plastered to rule).
3. Plaster leveling with a rule, polished with a metal trowel, tied, proportion 2 parts of water and 3 of
Yes, adding one kilogram of white cement for every 25 kg of plaster, the thickness will not be greater.
2 cm
4. Mortar-cement-sand plaster in a 1:6 ratio (rustic); with a cement grout nozzle
white
Fine leveling, with a rule and plumb of gray cement and sifted sand in a 1:3 ratio, 3mm thick.
The final finish will be polished with a metal flame (Placed in a reglazed coating).

Final finish
Vinyl paint brand COMEX, color Bubble code Q3-01, apply two coats, before painting.
apply sealant brand COMEX in a 1:5 ratio (Applied on a plastered surface, mortar, or tyrolean finish)
2. Application of LOBA brand textured paste 100% washable and breathable, for use indoors
and exterior code E-100 medium grain light brown
3. Vinyl paint brand COMEX, color White code 736, apply two coats, before painting apply
COMEX brand sealant proportion 1:5 (Applied on a gypsum plaster, mortar, or stucco)
4. COMEX brand vinyl paint, Monarch color code E3-09, apply two coats before painting
apply sealant brand COMEX ratio 1:5 (Applied on a plaster, mortar, or stucco)
5. Installation of the Kata Decor Garden border of 20x60x1 cm from the brand INTERCERAMIC, glazed.
from the factory
Installation of 20x30x1 cm Macao tile from the INTERCERAMIC brand, factory glazed.
7. Application of COMEX brand 100 Gloss Acqua enamel paint, apply two coats, before
paint apply sealant brand COMEX proportion 1:5 (Placed on a plaster, mortar or
Tyrol
8.Apply LOBA brand textured paste 100% washable and permeable, for application indoors.
and exterior code E-100 medium grain beige color
Placement of 20 x 30 cm tiles brand INTERCERAMIC model Breccia set with mortar
white cement and sand in a 1:5 ratio. Factory glazed
10. Vinyl paint brand COMEX, color Rosy code C1-05, apply two coats, before painting
apply sealant brand COMEX at a ratio of 1:5 (applied on a plaster, mortar, or stucco)
11. COMEX brand vinyl paint, color Swan code Q1-01, apply two coats, apply before painting
sealant brand COMEX proportion 1:5 (Applied on a plaster, mortar or stucco)
12. Vinyl paint brand COMEX, color Deer code G4-06, apply two coats, before painting
apply sealant brand COMEX ratio 1:5 (Placed on a plaster, mortar, or troweled surface)
13. Vinyl paint brand COMEX, color Flesh code A3-04, apply two coats, apply before painting
COMEX brand sealant ratio 1:5 (Applied on plaster, mortar, or stucco)
14. Lime plaster, white cement, and marble grain (zero coarse) proportion 1:1:8, thickness of
5mm to lead. Applied with a trowel and smoothed with a metal float (placed in a smoothing of
striped plaster) and subsequently application of COMEX brand vinyl paint, color Sand of the Sea
code H3-02, apply two coats, before painting apply sealer brand COMEX in a ratio of 1:5
(Placed on a plaster, mortar, or tyrolean surface)
15. Installation of 20 x 30 cm tiles brand INTERCERAMIC model Berna set with mortar
white cement and sand in a 1:5 ratio. Factory glazed
16. Installation of 20 x 30 cm tiles brand INTERCERAMIC model Laos set with mortar
white cement and sand in a ratio of 1:5. Factory glazed
17. Placement of 20 x 30 cm tiles brand INTERCERAMIC model Vesubio set with mortar
white cement and sand in a 1:5 ratio. Factory glazed
18. Placement of 20 x 30 cm tile brand INTERCERAMIC model Marble Collection set with
white cement mortar and sand in a ratio of 1:5. Factory glazed
 19. Vinyl paint brand COMEX, color Merlin code S4-01, apply two coats, apply before painting
COMEX brand sealant ratio 1:5 (Applied on a gypsum plaster, mortar, or roughcast)
20. Vinyl paint brand COMEX, color Juego code O2-06, apply two coats, apply before painting
sealant brand COMEX proportion 1:5 (Applied on a plaster surface, mortar or stucco)

CEILING
Finish base
Reinforced concrete floor slab, with reinforcement steel of 4200 kg/cm2 with a resistance
of 250kg/cm2 concrete ratio 1:4:6 cement-sand-gravel thickness of 10 cm
2. Concrete roof slab with reinforcement steel of 4200 kg/cm2 with a resistance of
concrete of 250 kg/cm2 ratio 1:4:6 cement-sand-gravel thickness of 10 cm
Initial finish
Plaster leveling with a rule, polished with a metal trowel, tied, ratio 2 parts water and 3 of
Yes, adding one kilogram of white cement for every 25 kgs of gypsum, the thickness will not be greater.
2 cm
2. Mortar-cement-sand plastering in a 1:6 ratio (rustic); with cement grout nozzle
white
3. Fine leveling, with a rule and lead of gray cement and sifted sand in a 1:3 ratio with a thickness of 3mm.
The final finish will be polished with a metal flame (Placed in a ruled plaster).
Final finish
1. Vinyl paint brand COMEX, color Mink code G4-07, apply two coats, before painting apply
COMEX sealant ratio 1:5 (Applied on a plaster, mortar, or tyrol surface)
2. Vinyl paint brand COMEX, color Soul code P5-01, apply two coats, apply before painting
COMEX brand sealant ratio 1:5 (Applied on a gypsum plaster, mortar, or stucco)
3. Installation of 20 x 30 cm tiles brand INTERCERAMIC model Breccia set with mortar
white cement and sand in a ratio of 1:5. Factory glazed. Installation on a line at 45°
4. Application of COMEX brand Acqua 100 Gloss Enamel paint, apply two coats, before
painting apply sealer brand COMEX ratio 1:5 (Applied on a plastered surface, mortar or
tyrol
5. COMEX brand vinyl paint, color Rosy code C1-05, apply two coats, before painting
apply sealant brand COMEX ratio 1:5 (applied on a plastered surface of gypsum, mortar or roughcast)
6. Vinyl paint brand COMEX, color Swan code Q1-01, apply two coats, before painting apply
COMEX brand sealant proportion 1:5 (Applied on a plaster, mortar or stucco surface)
7. Vinyl paint brand COMEX, color Deer code G4-06, apply two coats, before painting
apply sealant brand COMEX in a 1:5 ratio (applied on a plaster, mortar, or stucco surface)
8. Vinyl paint brand COMEX, color Meats code A3-04, apply two coats, before painting apply
COMEX brand sealant proportion 1:5 (Applied on a plaster, mortar, or stucco)
9. Vinyl paint brand COMEX, color Arena de Mar code H3-02, apply two coats, before painting
apply COMEX sealant in a 1:5 ratio (applied on a gypsum plaster, mortar, or stucco)
10. Installation of 20 x 30 cm tiles brand INTERCERAMIC model Berna set with mortar
white cement and sand in a ratio of 1:5. Factory glazed. Installed in a line at 45°
11. Placement of 20 x 30 cm tiles brand INTERCERAMIC model Laos set with mortar
white cement and sand in a 1:5 ratio. Factory glazed. Installed in a straight line at 45°
12. Installation of 20 x 30 cm tiles brand INTERCERAMIC model Vesubio set with mortar
white cement and sand in a ratio of 1:5. factory glazed. placement in line at 45°
13. COMEX brand vinyl paint, color Bubble code Q3-01, apply two coats, before painting
apply sealant brand COMEX at a ratio of 1:5 (Applied on a plaster finish, mortar or roughcast)
14. COMEX brand vinyl paint, color Merlin code S4-01, apply two coats, apply before painting
COMEX brand sealant proportion 1:5 (Applied on a gypsum plaster, mortar, or tyrol)
15. Placement of 20 x 30 cm tiles brand INTERCERAMIC model Marble Collection settled with
white cement and sand mortar in a 1:5 ratio. factory glazed. placement aligned at 45°
16. COMEX brand vinyl paint, Monarch color code E3-09, apply two coats, before painting.
apply sealant brand COMEX in a ratio of 1:5 (applied on a plaster, mortar, or stucco surface)

ROOF TERRACE
Finish base
Roof slab of reinforced concrete with steel reinforcement of 4200 kg/cm2 with a resistance of
concrete of 250 kg/cm2 ratio 1:4:6 cement-sand-gravel thickness of 10 cm
Initial finish
 Filling with tezontle and mortaring with cement-sand mortar of 3 cm thickness and brickwork, brick
Rono baked 2x14x28 cm. Set with cement-sand ratio 1:6
2. Mortar-cement-sand mixture 1:6, 3 cm thick and cold waterproofing INTERTOP
COMEX brand apply 2 coats with a roller.
Final finish
Cold waterproofing Intertop brand COMEX, apply 2 layers with a roller
2. Placement of ceramic tile measuring 40x15x2.1 cm brand COBERT fixed with soft iron wire and nails