Retro-reflective sensors
FPDK 14P5101/S35A
Retro-reflective sensors - standard
Article number: 11001138
Overview
■ retro-reflective sensor
■ 7m
■ pulsed red LED
■ PNP
■ no
■ connector M8 4 pin
■ -25 … 65 °C
■ IP 67
Picture similar
The product features and technical data specified do not express or imply any warranty. Technical modifications subject to change.
Technical data
General data Electrical data
Type Retro-reflective sensor Current consumption typ. 20 mA
Light source Pulsed red LED Voltage drop Vd < 1.8 VDC
Actual range Sb 7m Output function Light / dark operate
Nominal range Sn 7.2 m Output circuit PNP
Polarization filter Yes Output current < 100 mA
Alignment / soiled lens in- Flashing light indicator Short circuit protection Yes
dicator Reverse polarity protection Yes
Light indicator LED yellow Mechanical data
Sensitivity adjustment No Width / diameter 14.8 mm
Wave length 660 nm Height / length 43 mm
Suppression of reciprocal Yes Depth 31 mm
influence
Type Rectangular
Electrical data
Housing material Plastic (ASA, MABS)
Response time / release < 1 ms
Front (optics) PMMA
time
Connection types Connector M8 4 pin
Voltage supply range +Vs 10 … 30 VDC
Ambient conditions
Current consumption max. 25 mA
(no load) Operating temperature -25 … +65 °C
Protection class IP 67
2022-11-09
www.baumer.com Data sheet – FPDK 14P5101/S35A Page 1 of 2
Retro-reflective sensors
FPDK 14P5101/S35A
Retro-reflective sensors - standard
Article number: 11001138
Technical drawings
Connection diagram
The product features and technical data specified do not express or imply any warranty. Technical modifications subject to change.
2022-11-09
www.baumer.com Data sheet – FPDK 14P5101/S35A Page 2 of 2
