LUBRICATION ORDER

28 JULY 1993 LO 5-2420-224-12

TRACTOR, WHEELED, 4 X 4 DED SMALL EMPLACEMENT
EXCAVATOR (SEE)
(NSN 2420-01-160-2754) (EIC:EDL)
AND
TRACTOR, WHEELED, 4 X 4 DED HIGH MOBILITY
MATERIAL HANDLER (HMMH)
(NSN 2420-01-205-8636)

Reference: TM 5-2420-224-10 and T M 5-2420-224-20

Intervals (on-condition or hard time) and the related Level of maintenance. The lowest level of
man-hour times are based on normal operation. The maintenance authorized to lubricate a point is
man-hour time specified is the time you need to indicated by one of the following symbols as
do the services prescribed for a particular interval. appropriate: Operator/Crew (C), and Unit
On-condition (OC) oil sample intervals shall be Maintenance (0).
applied unless changed by the Army Oil Analysis
Program (AOAP) laboratory. Change the hard time Reporting errors and recommending improvements.
interval if your lubricants are contaminated or if you You can help improve this manual. If you find any
are operating the equipment under adverse mistakes or if you know of a way to improve the
operating conditions, including longer-than-usual procedures, please let us know. Mail your letter
operating hours. The hard time interval may be or DA Form 2028 (Recommended Changes to
extended during periods of low activity. If extended, Publications and Blank Forms) direct to:
adequate preservation precautions must be taken. Commander, US Army Tank-Automotive Command,
Hard time intervals will be applied in the event AOAP ATTN: AMSTA-MB, Warren, Ml 48397-5000. A reply
laboratory support is not available. will be furnished to you.

TOTAL MAN-HOURS

WARNING INTERVAL MAN-HOURS

D 0.4
Death or serious injury could result from M 3.5
repeated or prolonged breathing or skin
Q 4.0
contact of drycleaning solvent SD, type II,
S 4.5
P-D-680, Use in well-ventilated area. Do
A 5.0
not use near open flame or in excessive
heat.

Clean fittings before lubricating. Clean parts with

drycleaning solvent (SD), type II or equivalent. Dry
before lubricating

NOTE

Dotted arrow points indicate lubrication on

both sides of the equipment.

LO 5-2420-224-12 Card 1
 Card 2

LO 5-2420-224-12
 TM 5-2420-224-10

Card 3

LO 5-2420-224-12
 Card 4

LO 5-2420-224-12
 Card 5

LO 5-2420-224-12
 TM 5-2420-224-10

Card 3

Card 6

LO 5-2420-224-12
 Card 7

LO 5-2420-224-12
 Card 8

LO 5-2420-224-12
 Card 9

LO 5-2420-224-12
 Card 10

LO 5-2420-224-12
 Card 11

LO 5-2420-224-12
 Card 12

LO 5-2420-224-12
 Card 13

LO 5-2420-224-12
 Card 14

LO 5-2420-224-12
 Card 15

LO 5-2420-224-12
 Card 16

LO 5-2420-224-12
 Card 17

LO 5-2420-224-12
 Card 18

LO 5-2420-224-12
 Card 19

LO 5-2420-224-12
 Card 20

LO 5-2420-224-12
 Card 21

LO 5-2420-224-12
 Card 22

LO 5-2420-224-12
 TM 5-2420-224-20
Card 23

TM 5-2420-224-20

TM 5-2420-224-20

LO 5-2420-224-12
 TM 5-2420-224-20

Card 24

LO 5-2420-224-12
 Card 25

LO 5-2420-224-12
 Card 26

LO 5-2420-224-12
 Card 27

LO 5-2420-224-12
 TM 5-2420-224-20

Card 28

WARNING

LO 5-2420-224-12
 Card 29

CAUTION

LO 5-2420-224-12
 Card 30

LO 5-2420-224-12
 Card 31

LO 5-2420-224-12
 Card 32

LO 5-2420-224-12
 TM 5-2420-224-20

Card 33

TM 5-2420-224-20

TM 5-2420-224-20

LO 5-2420-224-12
By Order of the Secretary of the Army:

GORDON R. SULLIVAN
General, United States Army
Chief of Staff

Official:

MILTON H. HAMILTON
Administrative Assistant to the
Secretary of the Army
04569

Distribution:
To be distributed in accordance with DA Form 12–38–E (Block 0971) requirements for
LO5-2420-224-12.
PIN: 071468-000