Rolls-Royce Corporation

M250-B17

COMMERCIAL ENGINE
BULLETIN
(CEB)

Technical Publications
Index

March 3, 2020
 Rolls--Royce
COMMERCIAL ENGINE BULLETIN INDEX

Date Revision Date Compliance Compliance

CEB No. Subject Published Number Revised Requirement Completed

TP 1001 Gearbox Assembly, Starter -- Generator 07--06--71 2 01--14--72

And Fuel Control Gearshafts -- Rework Cancelled
09--15--14

TP 1002 Turbine Assembly, Gas Producer Turbine -- 10--04--71 1 02--20--76

Second--Stage Splined Adapter -- Replace Cancelled
09--15--14

TP 1003 Compressor Discharge Air Tubes -- Rework 06--10--71

Cancelled
09--15--14

TP 1004 Gearbox Assembly, Lube Oil Pump -- Re- 09--28--71 1 09--30--76

work to Increase Scavenging Capability

TP 1005 Compressor, New Rotor Assembly -- 02--15--72 Cancelled

Installation Instructions 01--14--15

TP 1006 Power and Accessories Gearbox -- Oil Filter 07--09--73

Inlet Tube Assembly, Replace

TP 1007 Compressor Assembly, New No. 2 Bearing, 11--16--71 Cancelled

Locking Key, Slinger and Nut -- Install 01--14--15

TP 1008 Gearbox Assembly, New Pinion Bearing 04--06--72 1 05--30--72

Cage -- Install

TP 1009 Gearbox Assembly, Inboard Compressor-- 04--13--72 3 08--30--93

to--Gearbox Mounting Inserts -- Replace
with Flanged Studs

TP 1010 Gearbox Assembly, Rework Gearbox 02--29--72 1 06--13--72

Housing to Provide O--ring at Oil Delivery
Tube Inlet Screen

TP 1011 Cancelled Prior to Publication

TP 1012 Cancelled Prior to Publication

TP 1013 Turbine Assembly, First-- and Third--Stage 04--27--72 Cancelled

Nozzles -- Flow Area Changed 12--02--14

TP 1014 Compressor Assembly, New No. 1 Bearing Cancelled

Damper and Washer -- Install

TP 1015 Compressor Assembly, New No. 1 Bearing Cancelled--

Damper and Spacer -- Install REF:
TP CEB 1026

TP 1016 Reduction Gearbox Assembly -- Prop Brake 03--14--73

Cover, Add O--ring Groove

TP 1017 Cancelled Prior to Publication

M250--B17 INDEX
Revised March 3, 2020 PAGE 1 OF 20
 Rolls--Royce
COMMERCIAL ENGINE BULLETIN INDEX

Date Revision Date Compliance Compliance

CEB No. Subject Published Number Revised Requirement Completed

TP 1018 Compressor Assembly, Rear Diffuser Seals 08--22--73 1 02--28--75

-- Rework

TP 1019 Cancelled Prior to Publication

TP 1020 Turbine Assembly, First--stage Nozzle 03--07--73 1 10--10--73

Diaphragm -- Replace

TP 1021 Cancelled Prior to Publication

TP 1022 Gearbox, Pinion Bearing Oil Nozzle -- Re- 02--20--76

place

TP 1023 Gearbox Assembly, Cover Assembly 04--23--73

Bosses -- Rework

TP 1024 Coordinator Control Assembly, Input and 02--12--76

Cam Disc Shaft and Input Power Lever --
Rework

TP 1025 Reduction Gearbox Assembly -- Prop Drive 04--16--73

Flange Spanner Nut Pretorque to Assure
Prop Shaft Parts Seating

TP 1026 Compressor Assembly, New No. 1 Bearing 08--05--73 1 02--20--76

Spring and Washer -- Install

TP 1027 Cancelled Prior to Publication

TP 1028 Turbine Assembly, Fourth--Stage Turbine Cancelled

Nozzle -- Rework

TP 1029 Gearbox Assembly, Torquemeter Shaft 08--29--73 2 08--30--93

Rear Nut Configuration -- Rework

TP 1030 Compressor, Superseded Wheels -- Rework 04--23--72 2 02--15--83

for Use with New Configuration

TP 1031 Turbine Assembly, New First Stage Turbine Cancelled

Wheel Installation and Reidentification

TP 1032 Fuel Pump Assembly -- Rework 03--31--71 1 07--09--73

TP A--1033 Gearbox Assembly, Lube Oil Filter Housing 03--18--74 2 02--10--82 07--01--82
Assembly -- Rework

TP 1034 Propeller Reduction Gearbox, Propeller 07--24--74 1 10--30--74

Drive Flange -- Replace and Rework

TP 1035 Power and Accessory Gearbox, Oil Check 07--31--74

Valve Assy -- Modify

TP 1036 Propeller Reduction Gearbox Rear Housing 04--03--75

Magnetic Plug Lockwire Lug -- Remove

M250--B17 INDEX
Revised March 3, 2020 PAGE 2 OF 20
 Rolls--Royce
COMMERCIAL ENGINE BULLETIN INDEX

Date Revision Date Compliance Compliance

CEB No. Subject Published Number Revised Requirement Completed

TP 1037 Gearbox Assembly, No. 2 1/2 Roller Bear- 08--15--75 1 11--30--76

ing Assembly -- Replace

TP 1038 Engine, Compressor Bleed Valve Assembly 04--17--75

-- Rework

TP 1039 Gearbox Oil Inlet Port Tee -- Rework 09--04--75

TP 1040 Engine, Spark Igniter Lead Support Clamps 03--27--75 2 02--20--76

-- Replace

TP 1041 Fuel Spray Nozzle, V--Slot Metering Valve -- 07--01--75

Install and Reidentify

TP 1042 Cancelled Prior to Publication

TP 1043 Turbine Assembly, New Third--Stage Wheel 04--25--75

and Power Turbine Support Oil Sump Cover
-- Install

TP 1044 Compressor, New Front Support, First-- 04--17--75

Stage Wheel, and Second-- and Third--
Stage Wheel Assembly -- Install

TP 1045 Compressor, No. 1 Bearing Seal -- Rework 11--15--76 3 08--15--85

TP 1046 Cancelled Prior to Publication

TP 1047 Compressor, No. 1 Ball Bearing -- Relieved 11--15--76 1 05--19--78

Outer Race

TP 1048 Cancelled Prior to Publication

TP 1049 Reduction Gearbox Assembly, Prop Gover- 10--13--75

nor Coupling -- Rework

TP 1050 Compressor, Spur Adapter Gear Shaft 01--22--76 1 01--25--77

Bearing Inner Race -- Add

TP 1051 Combined Governor Assembly, Flyweight 11--11--75 1 08--12--76

Carrier Configuration -- Modify

TP 1052 Turbine, First--Stage Nozzle Shield 12--30--77 3 11--30--15

Assembly -- Rework

TP 1053 Engine, Model 250--B17 Turboprop -- 04--08--76 2 01--31--94

Conversion to Model 250--B17B (Operator
Option)

TP 1054 Turbine Assembly, Second--Stage Nozzle -- 07--01--84 2 02--15--88

Rework

TP 1055 Bendix Fuel Control, Model DP--P1--Modifi- 04--08--76

cation to 250--B17B Model DP--P2

M250--B17 INDEX
Revised March 3, 2020 PAGE 3 OF 20
 Rolls--Royce
COMMERCIAL ENGINE BULLETIN INDEX

Date Revision Date Compliance Compliance

CEB No. Subject Published Number Revised Requirement Completed

TP 1056 Gearbox, Wet Spline Start--Generator Gear- 04--29--77 5 08--25--16

shaft -- Install

TP 1057 Power and Accessory Gearbox, Oil Check 08--03--77

Valve Poppet Assembly -- Replace

TP 1058 Reduction Gearbox Assembly, Optional 04--08--76 3 02--15--91

Prop Brake Removal Kit -- Install

TP 1059 Fuel System, Fuel Pump--to--Control and 11--30--77 1 02--01--78

Fuel Control--to--Pump Bypass Tube
Clamps -- Replace

TP 1060 Gearbox, Oil Pump Cover -- Rework 02--10--77

TP 1061 Compressor, Rear Diffuser Assembly -- Add 02--18--77 4 04--03--85

Bearing Puller Slots

TP 1062 Bendix Fuel Control, Fuel Inlet Filter Assem- 11--30--77

bly -- Replace

TP 1063 Propeller Reduction Gearbox, Planet Gear 03--15--77

and Bearing Assembly -- Rework

TP 1064 Engine, Compressor--to--Reduction Gear 06--18--76

Tie Bracket -- Remove

TP 1065 Turbine, Gas Producer Support and No. 8 07--30--76 3 04--21--78

Bearing Retaining Plate -- Rework

TP 1066 Dual and Single Element Fuel Pumps, Filter 02--23--77

Element -- Replace

TP 1067 Power and Accessory Gearbox, Oil Filter 11--30--77

Housing Magnetic Drain Plug Insert -- Install

TP 1068 Turbine, Power Turbine Support and Seal 04--07--77 4 06--01--79

Assembly -- Rework

TP 1069 Compressor, Front Bearing Housing As- 01--31--77 4 08--31--96

sembly -- Rework

TP 1070 Turbine, Power Turbine Support Oil Sump Cancelled

Cover Assembly -- Rework

TP A--1071 Engine, Compressor Bleed Valve Strainer 03--31--77 2 02--01--95 Not to exceed
Assembly -- Add 90 days from
03--31--77

TP 1072 Bendix Fuel Control, Enriched Acceleration 11--05--76

Flow Schedule -- Incorporate

TP 1073 Propeller Reduction Gearbox, Oil Transfer 03--15--77

Gland Sleeve -- Rework

M250--B17 INDEX
Revised March 3, 2020 PAGE 4 OF 20
 Rolls--Royce
COMMERCIAL ENGINE BULLETIN INDEX

Date Revision Date Compliance Compliance

CEB No. Subject Published Number Revised Requirement Completed

TP 1074 Propeller Gearbox, Prop Governor Driven 11--22--78

Bevel Gear -- Inspect

TP 1075 Engine, Anti--icing Valve Poppet Seat Screw 03--31--77

-- Special Inspection

TP 1076 Gearbox Assembly, Lube Oil Filter Housing 07--30--76 6 04--15--13

and Pressure Oil Pump Body -- Rework

TP 1077 Compressor, Bleed Valve Retainer Plate -- 11--15--76

Rework

TP 1078 Fuel System, Check Valve Assembly -- Add 05--06--77 1 11--05--77

TP 1079 Coordinator Control System, Beta Control 05--16--77

Tie Rod -- Replace

TP 1080 Bendix Fuel Control, Ratio Lever Assembly 11--05--77

-- Replace

TP 1081 Sundstrand Single Element Fuel Pump, 03--30--78 2 08--15--80 09--30--80

Drive Shaft Stop -- Add

TP 1082 Turbine, Power Turbine Rotating Labyrinth Cancelled--

Seal -- Rework REF: TP
CEB--1097

TP 1083 Gearbox, Power and Accessory, Cover As- 04--10--79 4 02--15--93

sembly Torquemeter Shaft Bore Bushing --
Add

TP 1084 Turbine, Slotted Third--Stage Wheel -- Cancelled--

Rework REF:
TP
CEB--A--1146

TP 1085 Power and Accessory Gearbox, Fuel 10--28--77 1 03--31--78

Control and Oil Pump Spur Gearshaft -- Re-
work

TP 1086 Propeller Gearbox, Prop Shaft Oil Plug Re- 06--24--77

taining Ring Groove -- Inspect

TP 1087 Turbine, Third--Stage Wheel Natural Cancelled--

Frequency -- Check REF:
TP
CEB--A--1146

TP 1088 Turbine, Power Turbine Outer Coupling Nut 11--30--77 2 04--30--85

-- Replace

TP 1089 Propeller Gearbox, Beta Valve Adapter 06--24--77

(Prop Oil Plug) Retaining Ring -- Functional
Check

TP 1090 Cancelled Prior to Publication

M250--B17 INDEX
Revised March 3, 2020 PAGE 5 OF 20
 Rolls--Royce
COMMERCIAL ENGINE BULLETIN INDEX

Date Revision Date Compliance Compliance

CEB No. Subject Published Number Revised Requirement Completed

TP 1091 Gearbox, Housing and Cover Oil Pressure 08--30--79 6 12--03--12

Ports Helical Coil Inserts -- Add

TP 1092 Cancelled Prior to Publication

TP 1093 Bendix Fuel Control, Maximum Fuel Flow 11--05--77

Setting -- Increase

TP 1094 Gearbox, Power -- Accessory Cover As- 04--28--79

sembly Pinion Gear Bearing Cage -- Re-
place

TP 1095 Propeller Gearbox, Propeller Shaft Oil Plug 04--10--78

Retaining Ring -- Replace

TP 1096 Bendix Fuel Control, Throttle Shaft Balance 03--31--78 1 07--31--79

Spring -- Remove

TP 1097 Turbine, Power Turbine (N2) Rotor -- Modifi- 11--30--77 4 05--10--88

cation

TP 1098 Turbine, No. 5 Oil Bellows Seal Assembly -- 11--30--77 1 05--14--78

Replace

TP 1099 Gearbox, Power -- Accessory Oil Filter Cap 03--09--79

-- Replace

TP 1100 Gearbox Oil Check Valve -- Replace 09--29--79 2 02--15--80

TP 1102 Compressor, Common 250--B17 and B17B 03--15--78

Configuration Modification

TP 1103 Engine, Gas Producer Turbine Forward 05--31--79 1 06--15--79

Labyrinth Seal -- Replace

TP 1104 Engine Fuel and Control, Fuel Control and 08--15--80 2 06--15--98
Governor Assemblies Screened Orifices --
Replace

TP 1105 Gearbox, Power -- Accessory Cover As- 04--06--79 1 09--30--82

sembly -- Replace

TP 1106 Turbine, Second--Stage Turbine Wheel and 02--28--79 1 04--30--81

Splined Adapter -- Replace

TP 1107 Engine, Compressor No. 1 Bearing Oil 05--01--79 1 08--15--79

Pressure Reducer -- Replace

TP 1108 Engine, Compressor Bleed Valve Piston 10--30--78

and Retainer -- Replace

TP 1109 Turbine, Power Turbine Shaft Shield -- 03--09--79 2 03--15--80

Replace

M250--B17 INDEX
Revised March 3, 2020 PAGE 6 OF 20
 Rolls--Royce
COMMERCIAL ENGINE BULLETIN INDEX

Date Revision Date Compliance Compliance

CEB No. Subject Published Number Revised Requirement Completed

TP 1110 Engine, Gearbox, Power Train Drive Gear Cancelled 06--30--97

Bearing Journals -- Modify by Adding
Grooves

TP 1111 Gearbox, Propeller Reduction Redesigned 01--30--80 7 10--15--93

Planet Gear Bearings and Carrier Plate --
Rework

TP 1112 Engine, Turbine Oil Manifold Clamp -- Add 02--28--79

TP 1113 Engine, Coordinator Mount and Fireshield -- 02--21--79 1 06--22--79

Modify

TP 1114 Engine “Quick Disconnect” Magnetic Drain 01--31--79 9 11--07--19

Plugs -- Install

TP 1115 Cancelled Prior to Publication

TP 1116 Cancelled Prior to Publication

TP 1117 Cancelled Prior to Publication

TP 1118 Propeller Gearbox, Prop Governor Driven Cancelled

Bevel Gear -- Rework

TP 1119 TRW Fuel Pump, Fixed and Pressurized 10--16--78

Bearing -- Rework

TP 1120 Gearbox Propeller Reduction Gearbox Gov- 04--11--79 1 10--15--93

ernor Driven Gear and Coupling Shaft -- Re-
place

TP 1121 Gearbox, Oil Filter Differential Pressure Kit 08--30--80 2 12--30--83

-- Option

TP 1122 Engine Fuel and Control Start--Acceleration 06--15--80 1 04--30--93

Flow Schedule Adjuster -- Add

TP A--1123 Engine, Power and Accessory Gearbox 05--28--79 8 08--13--99

Cover and Housing Assemblies Self--lock- Superseded
ing Threaded Inserts -- Add. Part II Rein-
stated. Part I Cancelled.

TP 1124 Turbine, Third--Stage Wheel Shroud Slots -- Cancelled--

Rework REF: TP
CEB--A--1146

TP 1125 Turbine, Third--Stage Nozzle -- Rework 08--31--79 1 10--15--79

TP 1126 Gearbox Assembly -- PTO Helical Gear- 01--18--80 7 06--01--84

shaft Assembly -- Replace

TP 1129 Tool, TRW Fuel Pump Drive Shaft Seal 08--15--79

Assembly -- Modify

M250--B17 INDEX
Revised March 3, 2020 PAGE 7 OF 20
 Rolls--Royce
COMMERCIAL ENGINE BULLETIN INDEX

Date Revision Date Compliance Compliance

CEB No. Subject Published Number Revised Requirement Completed

TP 1131 Compressor, Bleed Valve Assembly Gasket 01--25--80

-- Replace

TP 1132 Engine, Power and Accessory Gearbox Cancelled--

PTO Gearshaft Grooves -- Add REF: TP
CEB--1126

TP 1133 Gearbox, Propeller Reduction, Governor Cancelled--

Driven Bevel Gear and Coupling Shaft -- REF: TP
Modify CEB--1120

TP 1134 Engine, Power Turbine Outer Coupling Nut 10--15--79 3 04--30--85

-- Rework

TP 1135 Engine, Turbine Assembly No. 6 and 7 04--15--80 2 02--28--81

Bearing Pressure Oil Nozzle Assembly --
Replace

TP 1136 Bendix Fuel Control Assy -- Ratio Lever and 05--15--82 1 05--31--83
Bellows Assemblies with Improved Wear
Characteristics

TP 1137 Sunstrand, Fuel Pump and Filter Assembly 12--30--82 2 10--15--85 01--01--85
(Single Element) Driveshaft and Gear Set -- 10--31--85
Replace

TP A--1138 Engine, Turbine Inner and Outer P.T. Shafts 04--15--81

-- Replacement

TP 1139 Gearbox, Housing and Cover, Oil Scavenge 08--30--80 4 12--03--12

Ports Helical Coil Inserts -- Add

TP 1140 Engine, Power Turbine Support and Seal 03--31--81 1 03--15--82

Assembly -- Extend Inner Cross Section of
Scavenge Oil Drain Strut

TP 1141 Gearbox, Cover Assembly -- Replace Pinion 02--15--81 3 02--20--89

Bearing Cage With Cage of New Harder
Material

TP 1142 250--C20B to 250--C20 and 250--B17B, 08--15--80 3 06--05--07

B17C to 250--B17 Conversion Reissue

TP 1143 Propeller Overspeed Governor Assembly -- 04--22--81

Add Filter Screen Between Body and Reset
Solenoid Oil Inlet

TP 1144 Engine, Compressor No. 1 Bearing and Re- 03--15--81 2 07--01--84

taining Nut -- Replace

TP 1145 Combustion Liner Assembly -- Dome Sub- 04--30--81

Assembly of Hastelloy for Service Repair

TP A--1146 Engine, Turbine Assembly -- Third--Stage 04--20--81 6 08--01--89 08--31--90

Wheel -- Replace

M250--B17 INDEX
Revised March 3, 2020 PAGE 8 OF 20
 Rolls--Royce
COMMERCIAL ENGINE BULLETIN INDEX

Date Revision Date Compliance Compliance

CEB No. Subject Published Number Revised Requirement Completed

TP 1147 Engine, Turbine P.T. Inner and Outer Shafts Cancelled--

and Inner Coupling Nut Electroless Nickel REF: TP CEB
Plate Instead of Sermetel W or Alseal 500 A--1177

TP 1148 Engine, Gearbox, Inspect Oil Delivery Tube 07--15--81 1 04--15--83

(Piccolo) for Burrs Once Only

TP 1149 Engine, Turbine P.T. Inner Shaft -- Replace 12--15--81 2 12--02--85

by Shaft with Increased Pilot Diameter O.D.

TP 1150 Cancelled Prior to Publication

TP A--1151 Governor Assembly, Combined Power 02--05--82

Turbine and Propeller -- Function Test
Feathering During Ground Run

TP 1152 Gearbox, Propeller Reduction Gearbox, 04--22--83 1 06--01--89

Propeller Drive Flange and Seal -- Replace
by Drive Flange with Thicker Wall

TP 1153 Anti--Rotation Pin -- Replace 04--15--84 1 01--15--91

TP 1154 Cancelled Prior to Publication

TP 1155 Engine -- G.P. Turbine Support -- Power 06--15--84

Turbine Support and Seal Assy -- Break
Edge Hole

TP 1156 Engine, Propeller Reduction Gearbox, Rear 12--15--83 1 03--30--85

Housing Assy -- Increase Machined Radius
at Combined Governor Mounting Pad

TP 1157 Cancelled Prior to Publication

TP A--1158 Engine Fuel and Control, Sundstrand Single Cancelled--

Element Fuel Pump -- Inspect Drive Shaft REF: TP
CEB--1137

TP 1159 Turbine, Gas Producer Rotor Assy -- Re- Cancelled-- 01--01--87

place Tie Bolt by Tie Bolt of Superior REF: TP
Material CEB--1173

TP 1160 Engine Gearbox Lubrication System 09--30--82 1 11--15--83

Change Oil Pump Attachments Bolts

TP 1161 Cancelled Prior to Publication

TP 1162 Engine Gearbox Bearings Manufactured by 09--30--82 1 12--15--83

Marlin--Rockwell Corp. -- Inspect Separator

TP 1163 Cancelled Prior to Publication

TP 1164 Engine Compressor Assy Special Inspec- 01--30--83

tion of 6th--Stage Compressor Wheels

M250--B17 INDEX
Revised March 3, 2020 PAGE 9 OF 20
 Rolls--Royce
COMMERCIAL ENGINE BULLETIN INDEX

Date Revision Date Compliance Compliance

CEB No. Subject Published Number Revised Requirement Completed

TP 1165 Engine, Turbine, Retaining Ring Nos. 6 and 10--15--82 1 04--15--83

7 Bearings; Replace

TP A--1166 Engine Fuel and Control, Bendix Fuel 10--15--82 10--15--83

Control Assemblies and Power Turbine
Governor Assemblies -- Inspect Bushing
Assemblies

TP 1167 Engine Fuel and Control, Bendix Fuel 05--02--83 2 03--10--88

Control and P.T. Governor Assemblies, Add
Filter Fittings

TP 1168 Cancelled Prior to Publication

TP 1169 Cancelled Prior to Publication

TP 1170 Engine Fuel Control, Fuel Control -- Idle 08--30--83 1 04--03--85

Speed Limit Change

TP 1171 Cancelled Prior to Publication

TP A--1172 Engine, Quick Disconnect Magnetic Plugs -- Cancelled

Inspect Locking Pins and Insert Slots for
Wear

TP 1173 Engine, Turbine Assembly, Gas Producer 02--15--85 3 01--15--90 02--28--90

Rotor Assembly -- Replace Tie Bolt by Tie 02--28--92
Bolt of Improved Strength 02--28--94

TP 1174 Engine Fuel and Control, FCU and Gover- 03--15--84 2 07--15--87
nor Assy -- Modify

TP 1175 Engine Gearbox Assy Scavenge Oil Pump 04--22--83

Cover Assy -- Add Loctite to Gearshafts

TP 1176 Engine, Turbine -- New #5 Bearing Oil Seal Cancelled

TP A--1177 Engine, Turbine Assembly, Inner and Outer 10--16--85 4 11--24--08 08--31--92
Power Turbine Shafts, Thicker Electroless 08--31--95
Nickel Plate

TP 1178 Engine, Power Turbine Support Oil Sump 12--16--85 5 09--30--93

Cover Assy -- Modify

TP 1179 Model 250 Engine or Module Conversion 09--30--85 12 03--06--19

Authorization

TP 1180 Engine Fuel Control, Fuel Control Throttle 09--15--83 1 04--30--85

Cam Pickup Angle Limit Change

TP 1181 Engine, Reduction Gearbox Assy, Propeller 06--15--84 2 02--01--95 08--31--89

Shaft Assy and Drive Flange -- Reidentifica-
tion for Aerobatic Application

TP 1182 Air System, Compressor Bleed Valve Assy Cancelled

-- Modify

M250--B17 INDEX
Revised March 3, 2020 PAGE 10 OF 20
 Rolls--Royce
COMMERCIAL ENGINE BULLETIN INDEX

Date Revision Date Compliance Compliance

CEB No. Subject Published Number Revised Requirement Completed

TP 1183 Turbine Assy, Turbine Nozzle Shield Posi- 02--15--84 1 05--15--86

tioning Plug -- Modify

TP A--1184 Engine, Accessory Gearbox Assembly, 03--15--87 5 03--01--10

Through Bolt Retention of Idler Gears

TP 1185 Engine, Gearbox Assy, New Accessory 11--20--85

Drive System Bearing

TP 1186 Engine Conversion, 250--B17C to 02--15--86 3 07--30--93

250--B17E

TP 1187 Cancelled Prior to Publication

TP 1188 Cancelled Prior to Publication

TP 1189 Cancelled Prior to Publication

TP 1190 Engine, Reduction Gearbox Assembly, 04--15--86 3 01--31--94

Modify Rear Housing Assembly for Two
Added Oil Jets, New Sun Gear Locating
Plate, and Application of Loctite on the
Propeller Shaft Thrust Bearing Retaining
Nut

TP 1191 Cancelled Prior to Publication

TP 1192 Cancelled Prior to Publication

TP A--1193 Engine, Fuel, Lube and Air System, Im- 02--15--88 3 02--01--10 10--31--88
proved Strength PC Filter Housing 04--30--89
10--31--89
04--30--90

TP A--1194 Engine, Fuel and Air System PC Scroll to 06--23--86 3 04--15--92 07--31--86
PC Filter Tube Assy -- Inspection

TP 1195 Cancelled Prior to Publication

TP 1196 Cancelled Prior to Publication

TP 1197 Cancelled Prior to Publication

TP 1198 Cancelled Prior to Publication

TP 1199 Engine, Turbine Assembly ”U” Ring Gasket 04--15--86 1 01--15--98

TP 1200 Cancelled Prior to Publication

TP 1201 Cancelled Prior to Publication

TP 1202 Engine, Accessory Gearbox Oil Filter 07--01--89 2 10--20--17

Housing, Add Bronze Bushing to the “Oil
Out” Port

TP 1203 Cancelled Prior to Publication

M250--B17 INDEX
Revised March 3, 2020 PAGE 11 OF 20
 Rolls--Royce
COMMERCIAL ENGINE BULLETIN INDEX

Date Revision Date Compliance Compliance

CEB No. Subject Published Number Revised Requirement Completed

TP 1204 Engine, Fuel Control System, Woodward 04--01--88 3 06--15--92 08--31--93

Propeller Overspeed Governor Assy -- Re-
move and Replace

TP 1205 Cancelled Prior to Publication

TP 1206 Cancelled Prior to Publication

TP A--1207 Engine, Gearbox Assy, Improved PTO 11--01--88 04--30--89

Spline Oiling of “Non--Beta Valve”
Installations

TP 1208 Cancelled Prior to Publication

TP 1209 Cancelled Prior to Publication

TP 1210 Engine, Turbine Assembly, New Optimized Cancelled

Power Turbine Sump Clearances

TP 1211 Engine, Prop Reduction Gearbox, External 06--01--89 1 12--31--93

Oil Sump Tank, Install

TP A--1212 Engine, Turbine Assembly, First and Se- 06--01--88 4 05--21--04

cond--Stage Turbine Nozzles, Modify for
Incorporation of an Internal Energy Absorb-
ing Ring

TP A--1213 Engine, Turbine Assembly, Gas Producer 06--01--88 3 05--21--04

Support, Modify for Incorporation of an
Internal Energy Absorbing Ring

TP A--1214 Engine, Turbine Assembly, Internal Energy 06--01--88 4 09--29--04

Absorbing Ring -- Add

TP 1215 Engine, Engine Assembly Shipping Contain- 11--01--88 2 04--15--93

er -- Modify

TP 1216 Cancelled Prior to Publication

TP 1217 Cancelled Prior to Publication

TP 1218 Engine, Air System, Bleed Valve, Improved Cancelled

Valve Stem Bushing -- Install

TP 1219 Engine, Fuel and Control -- Fuel Pump, 07--01--88 1 12--17--07

Machine Fuel Pump Gear Housing

TP 1220 Engine, Accessory Gearbox, Install New Cancelled

Pressure Oil Tube

TP 1221 Engine, Fuel, Lube and Air System, New 11--01--88 02--01--89
Number One Bearing Pressure Oil Tube
and Reclamping of Existing New No. 1
Bearing Pressure Oil Tube

M250--B17 INDEX
Revised March 3, 2020 PAGE 12 OF 20
 Rolls--Royce
COMMERCIAL ENGINE BULLETIN INDEX

Date Revision Date Compliance Compliance

CEB No. Subject Published Number Revised Requirement Completed

TP 1222 Engine, Fuel and Control, Allied/Bendix Fuel 10--01--88

Control Modernization Convert from P/N
23007871 to P/N 23007870

TP 1223 Engine, Propeller Reduction Gearbox, Rear 03--15--91 1 07--30--93

Housing Rework to Maintain Interchange-
ability

TP 1224 Cancelled Prior to Publication

TP 1225 Engine, Accessory Gearbox Assembly, 01--31--89 1 06--15--94

Centrifugal Breather Gear, Improved Config-
uration

TP 1226 Engine, Turbine Assembly, Second--Stage 04--01--89

Turbine Wheel, Reduced Diameter Balance
Piston Seal Knife

TP 1227 Cancelled Prior to Publication

TP 1228 Engine, Turbine Assembly, First--Stage 11--15--90 2 04--15--93

Nozzle Diaphragm Locating Key Welds --
Modify

TP 1229 Reduction gearbox Assembly, Optional 09--30--90

4--Oil Jet System for Existing Prop Brake
Rear Housings -- Rework

TP A--1231 Engine, Fuel and Control, Inspection of 08--01--88 2 09--01--94 10--01--88

Certain Bendix Fuel Control Bellows 07--01--89
Assemblies

TP 1232 Cancelled Prior to Publication

TP 1233 Engine, Power and Accessory Gearbox As- 07--15--90 1 02--15--91

sembly, Modify for Use in Lighter--Than--
Air--Airships

TP 1234 Engine, Accessory and Prop Reduction 02--15--94 4 09--26--11

Gearboxes, New Sun Gear/PTO Gear
Configuration

TP 1235 Engine, Gearbox Assembly, Installation of 09--30--90 3 10--31--96

New 3 and 4 Roller Bearings

TP 1236 Engine, Gearbox Assembly, Spur Adapter 03--01--89 1 08--01--89

Gearshaft, Modify 2 1/2 Bearing Guide

TP 1237 Engine, Turbine Assembly, Gas Producer 05--01--89 3 06--15--93

Support, Addition of Brazed Or Welded
Wear Pads

TP 1238 Engine, Turbine Assembly, Internal Energy 03--01--89

Absorbing Ring (Series III, P/N 23031865),
Rework and Reidentify for Series II Use

TP 1239 Engine Conversion, 250--B17C to 06--30--93

250--B17F/2

M250--B17 INDEX
Revised March 3, 2020 PAGE 13 OF 20
 Rolls--Royce
COMMERCIAL ENGINE BULLETIN INDEX

Date Revision Date Compliance Compliance

CEB No. Subject Published Number Revised Requirement Completed

TP 1240 Engine, Gearbox Assembly, Starter Genera- 06--01--89

tor Gearshaft Modify Spline No--Go Gage

TP 1241 Cancelled Prior to Publication

TP 1242 Engine, Turbine Assembly, New Gas Cancelled

Producer Turbine Tiebolt Spanner Nut

TP 1243 Engine, Fuel Control, Model 250--B17 Se- 07--30--89

ries Bendix Fuel Control Unit Conversion to
Model 250--B17F Configuration

TP 1244 Engine, Tooling, Power and Accessories 06--01--89

Gearbox Bearing Removal Puller Kit, Modify

TP 1245 Engine, Fuel and Control, Conversion of 09--30--91

Model 250--B17 Series Allied/Bendix, Fuel
Control, Allison P/N 23007870, (Bendix P/N
2524654--21) to a Configuration Useable on
250--C20S Engines

TP 1246 Shipping Container Rework, PC Air Filter 10--01--91

Clearance

TP A--1247 Engine, Turbine Assy, Alseal Coating of 02--28--90 7 02--29--96 08--31--92

Power Turbine Inner and Outer Shafts 08--31--95

TP 1249 Engine, Air System, Bleed Valve, Improved 10--15--90 2 04--15--93

Valve Stem Bushing -- Install

TP 1250 Engine, Accessory Gearbox, Install New 04--30--90 1 06--21--91 12--21--90

Pressure Oil Tube

TP 1251 Engine, Compressor Assembly, Lubrication 03--29--91

Oil System Tubing -- Add Spacer

TP 1252 Engine, Combustion Liner, Rework Cancelled

TP A--1253 Engine, Turbine Assembly, Turbine Spline 04--30--90 1 07--15--91

Adapter P/N 6898784, Replace Certain
Suspect Adapters

TP 1254 Engine, Accessory, Propeller Governor, 09--15--90

Governor Drive Shaft

TP 1255 Cancelled Prior to Publication

TP 1256 Cancelled Prior to Publication

TP 1259 Engine, Fuel and Control, Elimination of 09--30--93 1 02--28--94

Interference, Fuel Cut--Off Rod and 200 Cancelled
Amp Starter Generator 09--07--09

TP 1261 Engine, Gearbox Assembly, Turbine 12--15--92 1 01--26--01

Pressure Oil Fitting, Add Seal

M250--B17 INDEX
Revised March 3, 2020 PAGE 14 OF 20
 Rolls--Royce
COMMERCIAL ENGINE BULLETIN INDEX

Date Revision Date Compliance Compliance

CEB No. Subject Published Number Revised Requirement Completed

TP 1262 Engine, Turbine Assembly -- Combustion 09--01--91 2 06--18--98

Liner -- Rework

TP 1263 Cancelled Prior to Publication

TP 1264 Engine, Compressor Assembly, Release of 03--15--92 4 10--16--15

New Coatings for Previously Uncoated
Compressor Wheels -- Rework

TP A--1265 Engine, Air System, Bleed Valve, Removal 10--15--91 04--30--92

of Plasma Sprayed Coating From Bore

TP 1267 Engine, Fuel and Control, Conversion of 09--30--91

Model 250--B17 Series Allied/Bendix Fuel
Control, Allison P/N 23007871, (Bendix P/N
2524661--21) to a Configuration Useable on
250--C20S Engines

TP 1268 Inspection of Oil Filter Tube Assembly, P/N 11--15--91

6876925A for Proper Engagement

TP 1269 Engine, Power and Accessory Gearbox 01--25--93

Housing Assembly, Rework to Remove
Web Wall Material from Casting Housing

TP 1270 Engine, Compressor Assembly, Compres- 12--20--91

sor Case P/N 6877410, Replace Certain
Suspect Compressor Cases

TP 1271 Engine, Compressor Assembly, Release of Cancelled

New Compressor Discharge Tubes -- Re-
place

TP 1272 Engine, Fuel, Lube, and Air System, Re- 06--15--92 1 09--15--96
lease of New Anti--icing Valve, Modify

TP 1273 Engine, Combustion Assembly, Compressor 03--15--92 1 09--06--06

Air Discharge Tube 23035281, Replace

TP A--1274 Bendix Main Fuel Controls Used on Model Cancelled

250 Series Engines -- Application of NYE
Synthetic Oil 608 to Beryllium Copper PC
Bellows Assembly

TP 1275 Engine, Fuel and Control, Release of New 02--15--93 1 12--07--93

Fuel Control with Stronger Bypass Valve
Cover Retaining Screws, Modify

TP 1276 Engine, Compressor Assembly, Compres- 08--31--93

sor Case, New Material Plastic, Add

TP A--1277 Engine, Fuel, Lube and Air Assembly, Fuel 07--30--92

Hose Assembly 23005205, Replace

TP 1278 Engine, Gearbox Assembly, Release of 06--30--93

New Bracket to Eliminate Interference with
Gearbox -- Replace

M250--B17 INDEX
Revised March 3, 2020 PAGE 15 OF 20
 Rolls--Royce
COMMERCIAL ENGINE BULLETIN INDEX

Date Revision Date Compliance Compliance

CEB No. Subject Published Number Revised Requirement Completed

TP 1279 Engine, Compressor Assembly, Release of 06--30--93 2 05--31--94

New Compressor Rotor Assembly -- Modify

TP 1280 Engine, Turbine Assembly, Release of New 07--30--93

Horizontal Fireshield and Access Panel, Re-
work

TP 1281 Engine, Compressor Assembly, Release of 12--31--93 5 08--15--11

New Compressor Coupling Adapter

TP 1282 Engine, Turbine Assembly, Release of New 05--31--94

No. 8 Bearing and Retaining Plate

TP A--1283 Engine Assembly, Fireshield Retaining Nut 10--30--93

Torque

TP 1284 Engine, Turbine Assembly, Authorization to 12--31--93 7 03--29--18

Reidentify Semi--finished 2nd--Stage
Nozzles

TP A--1285 Engine, Compressor Assembly, Spur Adapt- 03--31--93

er Gearshaft Assembly P/N 23034784, In-
spection

TP A--1286 Engine, Fuel and Control, Fuel Control 11--18--93 4 10--09--01

Bellows, Replace

TP A--1287 Engine, Control System, Coordinator Power 10--15--93 2 11--01--93

Input Lever

TP 1288 Engine, Fuel and Control -- Rework of Fuel 08--30--94 1 10--31--97

Control Throttle Shaft to Add Lubrication
Channel to Lubricate the Throttle Shaft

TP A--1289 Engine, Accessory Gearbox Assembly, Re- 08--15--95

moval of P.T. Overspeed Governor and In-
spection for Presence of Part No. 6854424
Seal

TP A--1290 Engine, Compressor Assembly, Replace- Cancelled

ment of Certain Vane Assemblies -- Diffuser
Part No. 6870813

TP 1291 Engine, Fuel and Control -- Removal of the 04--15--95 4 05--29--09

PY Line and PT Governor Cable

TP A--1293 Engine, Gearbox Removal of Certain Pinion 10--04--95 1 11--30--95

Gears

TP A--1294 Engine, Turbine, Visual Inspection of 01--15--96 2 10--15--97

Certain First--Stage Nozzle Shield Dome
Details for Condition

TP A--1295 Engine, Turbine, Inspection of First--Stage 01--15--96 2 05--12--99

Nozzle Shield Dome Detail for HMI or Over-
haul

M250--B17 INDEX
Revised March 3, 2020 PAGE 16 OF 20
 Rolls--Royce
COMMERCIAL ENGINE BULLETIN INDEX

Date Revision Date Compliance Compliance

CEB No. Subject Published Number Revised Requirement Completed

TP 1296 Engine, Fuel and Control, Release of New 07--31--96

Design Shaft Seal For CECO Model MFP
263 and 264 Fuel Pump

TP 1297 Engine, Fuel and Control, Coordinator 06--17--96 1 03--10--98

Support Bracket Attach Bolts, Replace

TP 1299 Engine, Fuel and Control -- Fuel Control 04--10--97 4 05--17--10

Drive Bearings -- Replace

TP 1300 Engine, Fuel and Control System -- 10--31--97

Coordinator Control Assembly -- Installation
of Longer Bolt

TP 1301 Engine, Fuel and Control, Fuel Control Stop 08--31--97 2 10--13--99
Nut -- Rework

TP A--1304 Engine, Gearbox Assembly -- Oil Delivery 03--15--99 2 02--02--04

Tube -- Replace

TP A--1305 Engine, Fuel and Control -- CECO Engine 08--21--97

Driven Fuel Pump -- Internal Spline
Inspection

TP A--1306 Engine, Fuel and Control -- Certain Allied- 05--30--98 2 06--28--00

Signal (Bendix) Fuel Control Units and
Power Turbine Governors -- Inspection of
Cam Followers Lever

TP 1307 Engine, Electrical -- Start Counter Assembly 01--15--99 1 03--17--99

-- Removal/Installation

TP 1308 Engine, Fuel and Control -- CECO 04--30--98

MFP--263 Fuel Pump -- Replace

TP 1309 Engine, Fuel and Control -- AlliedSignal 01--08--99 1 09--28--99

(Bendix) Main Fuel Control -- Incorporate
One Piece Bypass Valve Sleeve

TP 1311 Engine, Turbine Assembly -- Recoating Of 11--22--99 2 02--22--10

Power Turbine Inner Shaft

TP A--1312 Engine, Fuel and Control -- Honeywell Fuel 10--05--98 3 08--13--04

Control Unit and Power Turbine Governor --
Internal Spring Replacement

TP 1313 Engine, Gearbox Assembly -- Release Of 11--05--99 3 05--03--10

New Helical Torquemeter Gearshaft
Assemblies and Internal Retaining Rings
(Damper)

TP 1316 Engine, Fuel and Control -- Release of New 04--20--01 1 11--15--02

Bypass Retention Plate

M250--B17 INDEX
Revised March 3, 2020 PAGE 17 OF 20
 Rolls--Royce
COMMERCIAL ENGINE BULLETIN INDEX

Date Revision Date Compliance Compliance

CEB No. Subject Published Number Revised Requirement Completed

TP 1317 Engine, Compressor Assembly -- Impeller 03--22--00 1 07--12--07

Rework

TP A--1318 Engine, Turbine -- Inspection Of 1st--Stage 03--29--00 9 04--30--18

Nozzle Shield Dome

TP A--1319 Engine, Turbine Assembly -- Gas Producer 05--09--00 2 11--03--08

Rotor Assembly -- Replace Turbine Tie Bolt

TP A--1320 Engine, Gearbox -- Inspection For Installa- 02--15--00

tion Of Torquemeter Retaining (Damper)
Ring

TP A--1321 Engine, Compressor Assembly -- Visual In- 05--05--00 1 08--02--00

spection of Compressor Scroll Pressure
Probe Elbow (Pressure Probe)

TP A--1322 Engine, Turbine -- Relpacement Of 2nd-- 10--24--00 4 11--22--19

Stage Nozzle Diaphram

TP 1329 Engine, Fuel and Control -- Honeywell 04--06--01 1 05--13--02

(Bendix/AlliedSignal) Main Fuel Control
Units -- One Time Inspection of Screws

TP A--1331 Engine, Gearbox Assembly -- Inspection of 10--03--01 2 07--28--17

Helical Torquemeter Gearshaft Assembly

TP 1332 Engine, Main Accessory Gearbox -- 04--25--02

Release of Rework And Reidentified Lip
Seals

TP 1333 Engine, Compressor -- Removal of Certain 01-31-03

Front Compressor Bearing Housings

TP A-1334 Engine -- Compressor Adapter Coupling 09-09-03 4 08--23--10

TP 1335 Engine, Fuel and Control -- Goodrich Engine 04-07-04 3 03--06--19

Driven Fuel Pump Improved Drive Shaft
Durability

TP A--1336 Engine, Fuel Delivery -- Release of New 09-04-03 1 08--30--04

Fuel Nozzle

TP 1337 Engine, Gearbox Assembly -- Replacement 02--07--05

of Breather Gear Seal

TP A-1341 Engine -- Turbine Assembly -- Power 10-09-06 3 01--19--09

Turbine Outer Shaft

TP 1342 Engine, Turbine -- Inspection of Sump 02-19-07 1 07--12--07

Assembly, Oil -- Gasifier Turbine Bearing
Support

TP A-1343 Engine, Turbine Assembly -- Steady--State 12-22-06 7 01--10--19

Operation Avoidance Limit

M250--B17 INDEX
Revised March 3, 2020 PAGE 18 OF 20
 Rolls--Royce
COMMERCIAL ENGINE BULLETIN INDEX

Date Revision Date Compliance Compliance

CEB No. Subject Published Number Revised Requirement Completed

TP 1344 Engine -- Fuel & Control -- Fuel Control 12--21--07

Cutoff Lever Cancelled
09--07--09

TP 1345 Engine -- Power Turbine With Improved 04--14--99 5 04--21--17

Airflow Characteristics

TP 1346 Engine, Fuel and Control -- Honeywell 10--07--09 2 02--18--16

Main Fuel Controls -- Replacement of Cutoff
Valve Lever and Shaft Assembly, and Drive
Body Assembly

TP 1347 Engine, Turbine Assembly -- Replacement 09--13--10 1 08--15--11

of Turbine Gas Producer Forward Labyrinth
Seal

TP 1349 Engine -- Fuel Nozzle Spray Tip/Inner Air 09--09--13 2 10--20--14

Shroud Replacement

TP 1350 Engine, Fuel & Control -- Honeywell Main 04--09--12 2 12--01--15

Fuel Controls -- Replacement of the Bypass
Valve Sleeve

TP 1351 Engine -- N2 Shafting Replacement 04--14--14 1 06--16--14

TP A 1353 Engine, Compressor Assembly -- Inspection 07--29--14 1 08--22--14

of Front Support P/N M250--10051,
M250--10052, M250--10059, M250--10060

TP 1354 Engine -- No. 5 Bearing Retaining Ring 09--03--14 1 07--13--15

Replacement

TP 1355 Engine Turbine Assembly-- Inspection of 04--06--15 1 05--20--15

3rd--Stage Turbine Wheel Slotted Shroud

TP 1356 Engine -- Fuel and Control -- TECS Engine 12--09--14 1 01--14--15

Driven Fuel Pump Internal Spline Inspection

TP 1357 Engine -- No. 8 Beaaring Manufactured by 03--27--15

NHBB

TP 1360 Engine, Ignition System-- Repair or Re- 06--23--17

placement of Select Rolls--Royce P/N
6899093 (Unison P/N 10--614950--1) Igni-
tion Exciters

TP 1361 Engine, Fuel and Control-- Fuel Control New 10--26--17

Drive Bearings

TP 1362 M250 Gearbox Oil Check Valve, Guide, 10--16--19 1 01--08--20

Poppet, Check Valve Replace P/N
23085911 and 6898840 with New P/N
M250--10893 or P/N M250--10894

TP 1363 Engine, Turbine, 2nd--Stage Turbine Wheel 09--07--18 1 10--09--18

Replacement

M250--B17 INDEX
Revised March 3, 2020 PAGE 19 OF 20
 Rolls--Royce
INSTALLATION BULLETIN INDEX

Date Revision Date

IB No. Subject Published Number Revised

TP 1701 Engine, Propeller Reduction Gearbox, Beta 06--01--89

Control/Coordinator Kit

TP 1702 Elbow, Propeller Governor Replace with Tee, 90 06--29--87 1 10--01--91
-- No. 4 Flared Tube

TP 1703 Engine Assembly, Installation of Inverted Flight 06--01--89

Valve on 250--B17D or 250--B17F Engines

TP 1704 Installation of Four Jet Tubing on Nomad Aircraft 09--20--90

Only

M250--B17 INDEX
Revised March 3, 2020 PAGE 20 OF 20