BH R T IY

TUBE TOOLS

M A N U FA C T U R E R & E X P O R T E R O F
Tube Cleaners, Tube Tools,
Tube Expanders, Bolting Tools, Impact Sockets,
Pipe Beveling Machines,Pipe Cold Cutting Machines,
High Pressure Water Jet Cleaning Machines &Tapping Machines
 Our Successful Participation in Trade Fairs and
Conventions in INDIA and Overseas.

SISSA BANGALORE 2015 SISSTA, CHENNAI 2016

SISSTA, TIRUPATI 2017 MAHATECH, PUNE 2015 STAI, NEW DELHI 2016
[Link]
[Link]

CONTENTS

Sr. No. Product Page

1. Introduction 3

2. Boiler Tube Cleaner 4-8

3. Pneumatic Boiler Tube Cleaner 9 - 10

4. Chiller / Condenser Tube Cleaner 11 - 15

5. Pneumatic Tube Cleaner (Chocked Tube) 16

6. Cleaning Accessories for Tube Cleaner 17- 23

7. High Pressure Water Jet Cleaner 24 - 25

8. Hot & Cold Water Jetting Machine 26

9. Boiler Tube Expander 27

10. Condenser Tube Expander 28
11. Tube Expansion Machines 29-30
12. Tube Installation Tools 31
13. Tube Removal Tools and Machine 32-34
14. Tube Cleaner Selection Guide 35
2
 TUBE TOOLS
BH R T IY
INTRODUCTION

[Link]

3
[Link]
 BH R T IY
1.1/4” - 6” Tube I. D.

TUBE TOOLS

ec

CLOSE SYSTEM
OPEN SYSTEM
[Link]
[Link]

0.101.6 1.1/2”-4.0

B
0.101.6 1.1/2”-4.0

To view demo of above machine please visit our below youtube link [Link]
(If you cannot click below then either copy and paste the same in the browser or scan below QR code)

Double ball bearing Inner Core Machine End Socket

Hand Piece

Anti Friction Lining Outer Casing Machine End

Inner core Socket

It is fl

4
 BH R T IY
TUBE TOOLS

1.1/4” - 6” Tube I. D.
nd is attached to tool end.

INNER CORE DIA 11.0 MM 13 MM 15 MM 19.0 MM

MM (INCH) (7/16”) (½”) (5/8”) (3/4”)
OUTER CASING 22.0 MM 24.0 MM 29.0 MM 33.0 MM
MM (INCH) (7/8”) (15/16”) (1.14”) (1.3”)
LENGTH

Mtrs. Feet Sr. No. MODEL NO. MODEL NO. MODEL NO. MODEL NO.
6.0 20.0 1 BFS-104-20 BFS-105-20 BFS-106-20 BFS-107-20

7.5 25.0 2 BFS-104-25 BFS-105-25 BFS-106-25 BFS-107-25

8.0 27.0 3 BFS-104-27 BFS-105-27 BFS-106-27 BFS-107-27

9.0 30.0 4 BFS-104-30 BFS-105-30 BFS-106-30 BFS-107-30

10.0 33.0 5 BFS-104-33 BFS-105-33 BFS-106-33 BFS-107-33

12.0 40.0 6 BFS-104-40 BFS-105-40 BFS-106-40 BFS-107-40

15.0 50.0 7 BFS-104-50 BFS-105-50 BFS-106-50 BFS-107-50

18.0 60.0 8 BFS-104-60 BFS-105-60 BFS-106-60 BFS-107-60

20.0 65.0 9 BFS-104-65 BFS-105-65 BFS-106-65 BFS-107-65

25.0 82.5 10 BFS-104-82 BFS-105-82 BFS-106-82 BFS-107-82

[Link]
30.0 100.0 11 BFS-104-100 BFS-105-100 BFS-106-100 BFS-107-100

[Link]
Spare Inner Core Per Meter BIC-104 BIC-105 BIC-106 BIC-107

Spare Outer Casing Per Meter BOC-104 BOC-105 BOC-106 BOC-107

Spare Hand Piece BHP-104 BHP-105 BHP-106 BHP-107

Purpose: For ra

OPEN BODY CLOSE BODY

Tube I. D. Cutters Wheel

Serial No. Tool Head Spare Arms
MM INCH Set of 15 rollers
1 31.7 1.1/4 CT-10 CTW-1 CTA-1
2 33.3 1.5/16 CT-10A CTW-1 CTA-1
3 35.0 1.3/8 CT-11 CTW-1 CTA-1
4 36.5 1.7/16 CT-11A CTW-1 CTA-1
5 38.1 1.1/2 CT-12 CTW-2 CTA-2
6 39.7 1.9/16 CT-12A CTW-2 CTA-2
7 41.3 1.5/8 CT-13 CTW-2 CTA-2
8 42.9 1.11/16 CT-13A CTW-2 CTA-2
9 44.5 1.3/4 CT-14 CTW-3 CTA-3
10 46.0 1.13/16 CT-14A CTW-3 CTA-3
11 47.6 1.7/8 CT-15 CTW-3 CTA-3
12 49.2 1.15/16 CT-15A CTW-3 CTA-3
13 51.0 2 CT-16 CTW-3 CTA-3

5
 BH R T IY
1.1/4” - 6” Tube I. D.

TUBE TOOLS

Tube I. D. Cutters Wheel

Tool Head Spare Arms
Serial No. Set of 3 rollers
INCH Model No. Model No. Model No.
MM
1 31.7 1.1/4 T-10 TW-1 TA-1
2 35.0 1.3/8 T-11 TW-1 TA-1
3 38.1 1.1/2 T-12 TW-1 TA-1
4 41.3 1.5/8 T-13 TW-2 TA-2
5 44.5 1.3/4 T-14 TW-2 TA-2
6 47.6 1.7/8 T-15 TW-2 TA-2
7 51.4 2 T-16 TW-2 TA-2
[Link]

8 54.0 2.1/8 T-17 TW-2 TA-2

[Link]

9 57.1 2.1/4 T-18 TW-3 TA-3

10 63.5 2.1/2 T-20 TW-3 TA-3
11 70.0 2.3/4 T-22 TW-4 TA-4
12 76.2 3 T-24 TW-4 TA-4
13 82.5 3.1/4 T-26 TW-5 TA-5
14 88.9 3.1/2 T-28 TW-5 TA-5
15 95.2 3.3/4 T-30 TW-6 TA-6
16 101.6 4 T-32 TW-6 TA-6

Tube I. D. Cone Cutter Universal

Tool Head Spare Arms Joint
Serial No. Set of 3 rollers
INCH Model No. Model No. Model No. Model No.
MM
1 38.1 1.1/2 YT-12 YTC-12 YTA-12 YTUJ-12
2 44.5 1.3/4 YT-14 YTC-14 YTA-14 YTUJ-14
3 51.4 2 YT-16 YTC-16 YTA-16 YTUJ-16
4 57.1 2.1/4 YT-18 YTC-18 YTA-18 YTUJ-18
5 63.5 2.1/2 YT-20 YTC-20 YTA-20 YTUJ-20
6 69.8 2.3/4 YT-22 YTC-22 YTA-22 YTUJ-22
7 76.2 3 YT-24 YTC-24 YTA-24 YTUJ-24
8 88.9 3.1/2 YT-28 YTC-28 YTA-28 YTUJ-28
9 101.6 4 YT-30 YTC-30 YTA-30 YTUJ-30

64
 BH R T IY
TUBE TOOLS

1.1/4” - 6” Tube I. D.
MM INCH

CARBIDE DRILL

[Link]
[Link]
‘P’ & ‘TC’ TYPE

INCH
INCH INCH

Note : Maximum Size of P&TC Cutter is up to 7”.

7
 BH R T IY
1.1/4” - 6” Tube I. D.

TUBE TOOLS

Female Threading

TURK HEAD BRUSH DOUBLE SPIRAL BRUSH CIRCULAR WHEEL BRUSH

Max. Brush Size: 6” (152.4mm) "BDS" for removing light Max. Brush Size: 6” (152.4mm)
Purpose: For removal of light scale from scale and burnishing all Thickness: ½” to 2”
pan, evaporator, juice heaters tube. types of tubes Purpose: For polishing,
deburing & cleaning of tube

"WBA" HEAVEY
[Link]

DUTY BRUSH
It can be used along with 15 SPRING COIL BRUSH
[Link]

roller tool head cutter for Max. Brush Size: 38.1mm upto 152.4 mm I/D "EXS" EXPANDING SCRAPERS
quick cleaning size ¼” to 4” Purpose: For heavy duty tube cleaning. For thin scale, soot or soft deposits

Size ‘BT’ ‘BDS’ ‘BCW’ ‘WBA’ ‘BSC’ ‘EXS’

SR.
Turk Head Brush Double Sprial Brush Circular Wheel Brush Shuttle Cock Brush Spring Coil Brush Expanding Scrapper Brush
No.
MM INCH Model No. Model No. Model No. Model No. Model No. Model No.

1 31.7 1.1/4 BT-10 BDS-10 BCW-10 WBA-10 ---- EXS-10

2 35.0 1.3/8 BT-11 BDS-11 BCW-11 WBA-11 ---- EXS-11
3 38.1 1.1/2 BT-12 BDS-12 BCW-12 WBA-12 BSC-12 EXS-12
4 41.3 1.5/8 BT-13 BDS-13 BCW-13 WBA-13 BSC-13 EXS-13
5 44.5 1.3/4 BT-14 BDS-14 BCW-14 WBA-14 BSC-14 EXS-14
6 47.6 1.7/8 BT-15 BDS-15 BCW-15 WBA-15 BSC-15 EXS-15
7 50.8 2 BT-16 BDS-16 BCW-16 WBA-16 BSC-16 EXS-16
8 54.0 2.1/8 BT-17 BDS-17 BCW-17 WBA-17 BSC-17 EXS-17
9 57.1 2.1/4 BT-18 BDS-18 BCW-18 WBA-18 BSC-18 EXS-18
10 60.3 2.3/8 BT-19 BDS-19 BCW-19 WBA-19 BSC-19 EXS-19
11 63.5 2.5/8 BT-20 BDS-20 BCW-20 WBA-20 BSC-20 EXS-20
12 66.7 2.5/8 BT-21 BDS-21 BCW-21 WBA-21 BSC-21 EXS-21
13 69.8 2.3/4 BT-22 BDS-22 BCW-22 WBA-22 BSC-22 EXS-22
14 73.0 2.7/8 BT-23 BDS-23 BCW-23 WBA-23 BSC-23 EXS-23
15 76.2 3 BT-24 BDS-24 BCW-24 WBA-24 BSC-24 EXS-24
16 79.4 3.1/8 BT-25 BDS-25 BCW-25 WBA-25 BSC-25 EXS-25
17 82.5 3.1/4 BT-26 BDS-26 BCW-26 WBA-26 BSC-26 EXS-26
18 85.7 3.3/8 BT-27 BDS-27 BCW-27 WBA-27 BSC-27 EXS-27

19 88.9 3.1/2 BT-28 BDS-28 BCW-28 WBA-28 BSC-28 EXS-28

20 92.1 3.5/8 BT-29 BDS-29 BCW-29 WBA-29 BSC-29 EXS-29
21 95.2 3.3/4 BT-30 BDS-30 BCW-30 WBA-30 BSC-30 EXS-30
22 98.4 3.7/8 BT-31 BDS-31 BCW-31 WBA-31 BSC-31 EXS-31
23 101.6 4 BT-32 BDS-32 BCW-32 WBA-32 BSC-32 EXS-32

8
 BH R T IY
TUBE TOOLS

1.1/8” - 5” Tube I. D.
PNEUMATIC BOILER TUBE CLEANERS FOR BOILERS & HEAT EXCHANGER TUBES

6000 SERIES AIR MOTOR

Tube ID Bend Tube Straight Tubes

Sr. No.

[Link]
MM INCH Model Model

[Link]
1 22.0-24.0 7/8-61/64 B6024 B6324
2 25.0-29.0 1-1.5/32 B6029 B6329
3 30.0-35.0 1.3/16-1.25/64 B6035 B6335
4 36.0-41.0 1.27/64-1.21/32 B6041 B6341
5 42.0-50.8 1.5/8-2 B6051 B6351
6 50.8-57.1 2-2.1/4 B6057 B6357
7 57.1-63.5 2.1/4-2.1/2 B6063 B6363
9 63.5- 69.9 2.1/2-2.3/4 B6069 B6369
10 69.9-76.2 2.3/4-3 B6076 B6376
11 76.2-88.9 3.-3.1/2 B6088 B6388
12 88.9-101.6 3.1/2-4 B6101 B6401
12 101.6-127.0 4-5 B6127 B6427

To view demo of above machine please visit our below youtube link [Link]
(If you cannot click below then either copy and paste the same in the browser or scan below QR code)

Recommended for s

s cutters heads.

9
 BH R T IY
1.1/2” - 4” Tube I. D.

TUBE TOOLS

ARMOURING PLAIN AIR COMPRESSOR

UNIVERSAL JOINT
HOSE HOSE LINE

CUTTER AIR MOTOR HAND VALVE FRL

[Link]
[Link]

Armourd Hose Plain Hose :

Armourd Hose is connected It is located between Hand Valve, Hand Valve :
between spiral steel wire winding FRL / Compressor line. Standard Hand Valve is device for
throughout the hose length. controlling air pressure supply.
ength of plain hose is 10 meter.

Circular Brush Flexible Extention :

Circular Brushes are more FRL :
It is compact device mainly used
popular brushes with Air Motor. The main purpose of
for bend/straight tube cleaning.
These brushes are connected to Filter Regulator Lubricator
Air Motor by using either flexible is filter compressed air,
extension or universal joint. The regulates its pressure and
purpose of this brush for polishing, lubricate it with oil to protect
deburing and cleaning of tube inside parts of Air Motor
from rusting.

Universal Joint
It is small tool connected between
air motor and circular brush for
vertical straight tube cleaning.

10
 BH R T IY
TUBE TOOLS

1/4” - 2” Tube I. D.
ELECTRIC TUBE CLEANERS (’BPC-5' SERIES)
Hanger
for Flexible Shaft

Handle

Power Indicator
2 direction foot switch is optional Water
Inlet MCB
All units are available with following specifications
115 v 60Hz,1

Wheels Storage Box

While ations.

Motor Tube ID Speed

Model No.
HP KW INCH MM RPM

BPC-3 0.75 0.56 1/4 -1 6.4 - 25.40 910

[Link]
BPC-4 1.00 0.75 1/4 -1.1/4 6.4 - 31.75 910
BPC-4S 1.00 0.75 1/4-1 6.4-25.40 1440 BPC-5 Machine

[Link]
BPC-5 2.00 1.50 1/4-1.1/2 6.4-38.10 910 Foot Switch
BPC-6 2.00 1.50 1/4-1.1/4 6.4-31.75 1440

To view demo of above machine please visit our below youtube link [Link]
(If you cannot click below then either copy and paste the same in the browser or scan below QR code)

PORTABLE TUBE CLEANER : (’BPC-P' SERIES)

BPC-P is a port

nly when machine is running.

Tool & Foot Switch Storage Box

Nylon Brush

Motor Tube ID Speed

Model No.
HP KW INCH MM RPM
BPC-P 0.50 0.40 1/4 -1 6.4 - 25.4 1440
BPC-P1 1.00 0.75 1/4 -1 6.4 - 25.4 1440

Flexible Shaft
220v 50Hz-4.5 Amps. BPC-P Machine

To view demo of above machine please visit our below youtube link [Link]
(If you cannot click below then either copy and paste the same in the browser or scan below QR code)

11
 BH R T IY
1/4” - 2” Tube I. D.

TUBE TOOLS

FLEXIBLE SHAFT
BRASS BRUSH

AIR INLET
FLEXIBLE SHAFT
QUICK CONNECTION
CONNECTION
AIR FILTER
WATER INLET AIR PRESSURE REGULATOR
SPEED/ TORQUE
CONTROLLER AIR PRESSURE GAUGE

WHEELS
STORAGE BOX FOR FOOT PEDAL
& ACCESSORIES
[Link]

POWDER COATED
MOBILE DOLLY
[Link]

AIR FOOT PEDAL

Motor Air Supply Weight

Tube I.D Tube Cleaner Motor Power Speed Dimension

MM INCH Model No. HP KW RPM Min Max LBS. KG. HIGH WIDE DEEP
60psi 90psi
6.4 - 38.1 1/4” - 1.1/2” BPTC-400 4 3 0-3000 @ @ 66 30 38”(975mm) 22”(560mm) 16”(406mm)
15cfm 70cfm

To view demo of above machine please visit our below youtube link [Link]
(If you cannot click below then either copy and paste the same in the browser or scan below QR code)

12
 BH R T IY
TUBE TOOLS
Hanger for

1/4” - 2” Tube I. D.
Flexible Shaft

Handle

Power
Water MCB Indicator
Inlet

Wheels Storage
Box

Motor Tube ID Speed

Foot Model No.
Switch HP KW INCH MM RPM

BPC-4-DUO 1.0 0.75 1/4 -1 6.4-25.40 1440

BPC-4-DUO

[Link]
Special Tough
Moulded End

[Link]
Cap & Gaurd

Nylon
Casing

Shaft Stopper

Tube ID range Flexible Shaft Flexible shaft Length Nylon Casing O.D. Inner Core O.D. Tool End
MM INCH Model No. FEET MTRS. INCH MM INCH MM Thread
NFSC-701-12 12 3.7
6.4-9.5 1/4-3/8 1/4 6.4 1/8 3.2 8-32 F
NFSC-701-25 25 7.6
NFSC-702-12 12 3.7
NFSC-702-17 17 5.2
11.1-12.7 7/16-1/2 NFSC-702-25 25 7.6 3/8 9.5 1/4 6.4 1/4-28 F
NFSC-702-35 35 10.7
NFSC-702-45 45 13.7
NFSC-703-12 12 3.7
NFSC-703-17 17 5.2
NFSC-703-25 25 7.6
14.3-25.4 9/16-1 NFSC-703-35 35 10.7 1 /2 12.7 5/16 7.9 1/4-28 F
NFSC-703-45 45 13.7
NFSC-703-60 60 18.3
NFSC-703-75 75 22.9
NFSC-705-12 12 3.7
NFSC-705-25 25 7.6 3/4 19.1 1/2 12.7 1/2-12 F
22.1-38.1 7/8-1.1/2
NFSC-705-35 35 10.7
NFSC-705-45 45 13.7

13
 BH R T IY
TUBE TOOLS
1/4” - 2” Tube I. D.

SPEED
PRESSURE TORQUE
GAUGE CONTROLLER
PRESSURE
REGULATOR
CONNECTION FOR
CONNECTION FOR WATER SUPPLY
AIR SUPPLY
QUICK CONNECT
OF SHAFT TO
CLEANER

AIR FOOT PEDAL

FLEXIBLE SHAFT
[Link]
[Link]

SINGLE SPIRAL
BRASS BRUSH

Motor Air Supply Weight

Tube I.D Tube Cleaner Motor Power Speed Dimension

MM INCH Model No. HP KW RPM Min Max LBS. KG. HIGH WIDE DEEP
60 psi 90psi
10.3/8” 6” 19”
6.4 & UP 1/4 & UP BPTC-150 1.5 1 0-3000 @ @ 33 15 (264mm) (150mm) (483mm)
15cfm 70cfm

14
 BH R T IY
FLEXIBLE SHAFTS TUBE TOOLS

1/4” - 2” Tube I. D.
Steel Casing O.D.
MM INCH Model No. FEET MTRS MM INCH MM INCH

BFSC-706-12 12 3.7
25.4 1 BFSC-706-25 25 7.6
22.2 7/8 12.7 1/2 1/2 - 12F
and up and up BFSC-706-35 35 10.7
BFSC-706-45 45 13.7

FLEXIBLE SHAFTS REPAIR / MAINTENANCE

NFSC
701 / 702 / 703 / 705
TC-703
Casing Nipple CN-703
SHAFT REPAIR COUPLINGS MC-703

DC-703
Rubber Gasket RG-703

[Link]
For, NFSC-701, NFSC-702, NFSC-703, NFSC-704, NFSC-705 FLEXIBLE SHAFT

[Link]
SHAFT MANIFOLD TOOL
WASHER CAP COUPLING

DRIVE CASE NYLON

COUPLING COUPLING GUARD

Flexible Shaft

CONTENTS:

BPC-4 Tube Cleaners Flexible Shaft Crimping Tool Repair Kit

15
 BH R T IY
TUBE TOOLS
3/16” - 2” Tube I. D.

CHOKED TYPE PNEUMATIC TUBE CLEANERS

Driven Shaft Drive Drive Threaded
Shaft Coupling Shaft Coupling Connection

Air Trigger

Starter Drill
Connection Point
(Optional)
for Water Connection point
for Air
[Link]

Model Motor Power Tube ID Speed Air Supply Water Supply Weight
No.
[Link]

HP KW INCH MM RPM Min. Max. Min. Max. LBS. KG.

BC - 20 0.6 0.45 3/16-1 4.8-25.4 700 60psi@16cfm 90psi@16cfm 30psi 100psi 5.72 2.6
BC - 750 1.2 0.90 7/8-2 22.2-51.0 1000 90psi@20cfm 90psi@40cfm 30psi 100psi 6.60 4.0

PORTABLE PNEUMATIC TUBE-2 CLEANER ACCESSORIES

To view demo of above machine please visit our below youtube link [Link]
(If you cannot click below then either copy and paste the same in the browser or scan below QR code)

16
 BH R T IY
TUBE TOOLS

1/4” - 1” Tube I. D.
Nylon Brush

Brass Brush

Stainless Steel Brush

Brush O.D.
Nylon Brush Stainless Steel Brass Brush Threading Coupling
INCH MM
1/4 6.4 SSB-N-204 SSB-SS-204 SSB-B-204 8 - 32F P-1 (8 - 32M x 8 - 32M)

[Link]
5/16 7.9 SSB-N-205 SSB-SS-205 SSB-B-205 8 - 32F P-1 (8 - 32M x 8 - 32M)

[Link]
3/8 9.5 SSB-N-206 SSB-SS-206 SSB-B-206 12 - 24F P-2 (8 - 32M x 12 - 24M)
7/16 11.1 SSB-N-207 SSB-SS-207 SSB-B-207 1/4 - 28M -
½ 12.7 SSB-N-208 SSB-SS-208 SSB-B-208 1/4 - 28M -
9/16 14.3 SSB-N-209 SSB-SS-209 SSB-B-209 1/4 - 28M -
5/8 15.9 SSB-N-210 SSB-SS-210 SSB-B-210 1/4 - 28M -
11/16 17.5 SSB-N-211 SSB-SS-211 SSB-B-211 1/4 - 28M -
3/4 19.1 SSB-N-212 SSB-SS-212 SSB-B-212 1/4 - 28M -
13/16 20.6 SSB-N-213 SSB-SS-213 SSB-B-213 1/4 - 28M -
7/8 22.2 SSB-N-214 SSB-SS-214 SSB-B-214 1/4 - 28M -
15/16 23.8 SSB-N-215 SSB-SS-215 SSB-B-215 1/4 - 28M -
1 25.4 SSB-N-216 SSB-SS-216 SSB-B-216 1/4 - 28M -

Drill Tip Double Diameter Nylon Brush

Drill Tip Double Diameter Brass Brush

Tube I.D. Drill Tip Drill Tip

INCH MM Nylon Brush Brass Brush

5/8 15.9 DTBN-625 DTBB-625

Tube I.D. Spin-Grit

INCH MM Brushes
1/4-3/8 6.4-9.5 BSGB-050
7/16-9/16 11.1-14.3 BSGB-075
5/8-11/16 15.9-17.5 BSGB-100
3/4-1 19.1-25.4 BSGB-125

Spin-Grit Brush

17
 BH R T IY
1/4” - 1” Tube I. D.

TUBE TOOLS

Tube I.D. Power Spin-Grit

INCH MM Brushes

½ 12.7 BPSGB-050
Power Spin 5/8 15.9 BPSGB-062
G Brush 3/4 19.1 BPSGB-075
1 25.4 BPSGB-100

Tube I.D. Scrubber

Model Color Type
INCH O.D. (INCH)
MM
0.495-0.541 12.57-13.74 0.560 BTS-560-S Yellow Soft
0.527-0.555 13.39-14.10 0.560 BTS-560 Yellow Hard
0.570-0.620 14.50-15.75 0.630 BTS-630-S Brown Soft
0.590-0.630 15.00-16.00 0.630 BTS-630 Brown Hard
0.620-0.675 15.75-17.15 0.695 BTS-695-S Red Soft
0.652-0.694 16.56-17.63 0.695 BTS-695 Red Hard
0.660-0.730 16.76-18.54 0.750 BTS-750-S Purple Soft
0.710-0.750 18.03-19.05 0.750 BTS-750 Purple Hard
0.730-0.800 18.54-20.32 0.825 BTS-825-S White Soft
0.777-0.819 19.74-20.80 0.825 BTS-825 White Hard
[Link]

0.780-0.850 19.81-21.60 0.870 BTS-870-S Green Soft

[Link]

0.825-0.870 20.96-22.10 0.870 BTS-870 Green Hard

0.870-0.944 22.10-24.00 0.960 BTS-960-S Blue Soft
0.886-0.950 22.50-24.13 0.960 BTS-960-M Blue Medium
0.902-0.956 22.91-24.28 0.960 BTS-960 Blue Hard
Tube Scrubers by Model & Color 1.000-1.085 25.40-27.56 1.100 BTS-1100-S Black Soft
1.027-1.106 26.09-28.09 1.100 BTS-1100 Black Hard

Tube I.D. Carbide

INCH MM Drill
1/4 6.4 BCB-025
3/8 9.5 BCB-037
7/16 11.1 BCB-043
½ 12.7 BCB-050
9/16 14.3 BCB-056
5/8 15.9 BCB-062
11/16 17.5 BCB-068
Carbide Drill

Tube I.D. Flex-Hone

INCH MM Abrasive Tools
1/4 6.4 BFHT-025
5/16 7.9 BFHT-031
3/8 9.5 BFHT-037
7/16 11.1 BFHT-043
½ 12.7 BFHT-050
9/16 14.3 BFHT-056
5/8 15.9 BFHT-062
11/16 17.5 BFHT-068
3/4 19.1 BFHT-075
7/8 22.2 BFHT-087
1 25.4 BFHT-100 Flex-Hose Abrasive Tools

18
 BH R T IY

1.1/4” - 4” Tube I. D.
TUBE TOOLS

Tube I.D. Cup Brush

INCH MM Tools

½-3/4 12.7-19.1 BCS-075B

½-3/4 12.7-19.1 BCS-075S Cup Brush Tool

Tube I.D. Wheel Brush

INCH MM Tools

½-3/4 12.7-19.1 BCW-075B

13/16-1 20.6-25.4 BCW-100B
½-3/4 12.7-19.1 BCW-075S Wheel Brush Tool
13/16-1 20.6-25.4 BCW-100S

[Link]
[Link]
Nylon Brush

Brass Brush

Stainless Steel Brush

Brush O.D. Nylon Brass Stainless

INCH Brush Brush Steel
MM
1.1/4 31.7 SSB-N-012 SSB-B-012 SSB-S-012
1.1/2 38.1 SSB-N-015 SSB-B-015 SSB-S-015
1.3/4 44.5 SSB-N-017 SSB-B-017 SSB-S-017
2 51.0 SSB-N-020 SSB-B-020 SSB-S-020
2.1/4 57.1 SSB-N-022 SSB-B-022 SSB-S-022
2.1/2 63.5 SSB-N-025 SSB-B-025 SSB-S-025
2.3/4 70.0 SSB-N-027 SSB-B-027 SSB-S-027
3 76.2 SSB-N-030 SSB-B-030 SSB-S-030
3.1/4 82.6 SSB-N-032 SSB-B-032 SSB-S-032
3.1/2 89.0 SSB-N-035 SSB-B-035 SSB-S-035
3.3/4 95.2 SSB-N-037 SSB-B-037 SSB-S-037
4 101.6 SSB-N-040 SSB-B-040 SSB-S-040

19
 BH R T IY
1.1/8” - 14” Tube I. D.

Brush O.D. Carbon Plastic TUBE TOOLS

INCH MM Brush Brush

5 127.0 CS - 050 P - 050

6 152.4 CS - 060 P - 060
7 178.0 CS - 070 P - 070
8 203.2 CS - 080 P - 080
9 228.6 CS - 090 P - 090
10 254.0 CS - 100 P - 100 Carbon Steel Brush
11 279.4 CS - 110 P - 110
12 305.0 CS - 120 P - 120
13 330.2 CS - 130 P - 130
14 355.6 CS - 140 P - 140

Plastic Brush

Power Spin-Grit Brush

[Link]
[Link]

Straight Brush
Assemblies

Curved Tube I.D. Wheel Brush Actual Brush O.D. Replacement Replacement Replacement
INCH MM Assembly INCH MM Brushes (2 req.) Universal Joint Retainer Bolt
1.1/8-1.1/4 28.6-31.7 WBS-100 1 25.4 WBR-100 CUJ-001 SWB-001
1.3/8-1.1/2 36.0-38.1 WBS-125 1.1/4 31.7 WBR-125 CUJ-001 SWB-001
1.5/8-1.3/4 41.3-44.5 WBS-150 1.1/2 38.1 WBR-150 CUJ-001 SWB-001
1.7/8-2 47.6-51.0 WBS-175 1.3/4 44.5 WBR-175 CUJ-002 SWB-002
2.1/8-2.1/4 54.0-57.1 WBS-200 2 51.0 WBR-200 CUJ-002 SWB-002
2.3/8-2.1/2 60.3-63.5 WBS-225 2.1/4 57.1 WBR-225 CUJ-002 SWB-002
2.5/8-2.3/4 66.7-70.0 WBS-250 2.1/2 63.5 WBR-250 CUJ-002 SWB-002
2.7/8-3 73.0-76.2 WBS-275 2.3/4 70.0 WBR-275 CUJ-002 SWB-002
3.1/8-3.1/4 79.4-82.6 WBS-300 3 76.2 WBR-300 CUJ-002 SWB-002

Curved Tube Wheel

Brush Assembly

20
 BH R T IY

1.1/4” - 3.1/2” Tube I. D.

TUBE TOOLS

Curved Tube I.D. Wheel Brush Actual Brush O.D. Replacement Replacement Replacement
INCH MM Assembly INCH MM Brushes (two req.) Universal Joint Retainer Bolt

1.1/4-1.3/8 31.7-35.0 WBC-100* 1 25.4 WBR-100 CUJ-003* CWB-001

1.1/2-1.5/8 38.1-41.3 WBC-125* 1.1/4 31.7 WBR-125 CUJ-003* CWB-001
1.3/4-1.7/8 44.5-47.6 WBC-150* 1.1/2 38.1 WBR-150 CUJ-003* CWB-001
2-2.1/8 51.0-54.0 WBC-175 1.3/4 44.5 WBR-175 CUJ-002 CWB-002
2.1/4-2.3/8 57.1-60.3 WBC-200 2 51.0 WBR-200 CUJ-002 CWB-002
2.1/2-2.5/8 63.5-66.7 WBC-225 2.1/4 57.1 WBR-225 CUJ-002 CWB-002
2.3/4-2.7/8 70.0-73.0 WBC-250 2.1/2 63.5 WBR-250 CUJ-002 CWB-002
3-3.1/8 76.2-79.4 WBC-275 2.3/4 70.0 WBR-275 CUJ-002 CWB-002
3.1/4-3.1/2 82.6-89.0 WBC-300 3 76.2 WBR-300 CUJ-002 CWB-002

Buffing Tool

Replacement Blades

[Link]
Buffing Tool with Drill Tip

[Link]
Tube I.D. Carbide
INCH MM Drill
3/4 19.1 BCB-075
7/8 22.2 BCB-088
1 25.4 BCB-100
Carbide Drill

Tube I.D. Flex-Hone

INCH MM Abrasive Tools
1.1/4 31.7 FHT-125
1.1/2 38.1 FHT-150
1.3/4 44.5 FHT-175
Flex-Hone Abrasive Tool 2 51.0 FHT-200
2.1/4 57.1 FHT-225
2.1/2 63.5 FHT-250
2.3/4 70.0 FHT-275
3 76.2 FHT-300

21
 1.1/8” - 3.3/4” Tube I. D.

BH R T IY
TUBE TOOLS

Complete Complete
Straight Tube I.D. Curved Tube I.D. Single Double Cone Max
Replacement Universal Single Double
Cone Cone Cone Only Joint Cone Bolt Cone Bolt
Assembly Assembly
INCH MM INCH MM INCH MM

1.1/8-1.1/4 28.6-31.7 1.1/4-1.3/8 31.7-35.0 BSCA-100 BDCA-100 1 25.4 RCO-100 CUJ-001 CRB-001 DCB-001
1.5/16-1.3/8 33.3-35.0 1.1/2-1.5/8 38.1-41.3 BSCA-112 BDCA-112 1.1/8 28.6 RCO-112 CUJ-002 CRB-002 DCB-002
1.7/16-1.1/2 36.5-38.1 1.3/4-1.7/8 44.5-47.6 BSCA-125 BDCA-125 1.1/4 31.7 RCO-125 CUJ-002 CRB-002 DCB-002
1.9/16-1.3/4 39.7-44.5 2-2.1/8 51.0-54.0 BSCA-150 BDCA-150 1.1/2 38.1 RCO-150 CUJ-002 CRB-002 DCB-002
1.13/16-2 46.0-51.0 2.1/4-2.3/8 57.1-60.3 BSCA-175 BDCA-175 1.3/4 44.5 RCO-175 CUJ-002 CRB-002 DCB-002
2.1/16-2.5/16 52.4-58.7 BSCA-200 BDCA-200 2 51.0 RCO-200 CUJ-002 CRB-002 DCB-002

Replacement Cone Single Cone Assembly Double Cone Assembly Disc Cone Assembly
[Link]
[Link]

Straight Tube I.D. Curved Tube I.D. Complete Replacement Cone

Disc Only Universal
Disc Cone Cone Only Retainer Bolt
(less cones) Joint
INCH MM INCH MM Assembly (three req.) (three req.)

2.3/8-2.13/16 60.3-71.4 2.1/2-3.1/16 63.5-77.8 BDC-101 PCO-100 PCD-101 CUJ-002 CRB-001

2.7/8-3.5/16 73.0-84.1 3.1/8-3.5/8 79.4-92.1 BDC-102 PCO-100 PCD-102 CUJ-002 CRB-001
3.3/8-3.3/4 85.7-95.2 3.11/16-4 93.7-101.6 BDC-103 PCO-112 PCD-102 CUJ-002 CRB-002

Straight Tube I.D. Curved Tube I.D. Flex Hub

Assembly
INCH MM INCH MM
7/8-11/2 22.2-38.1 1-1.3/4 25.4-44.5 BPTC-226
1.1/2-2 38.1-51.0 1.3/4-2.1/2 44.5-63.5 BPTC-231 Flex Hub Assembly Replacement Blades
1.3/4-3 44.5-76.2 2.1/2-3 63.5-76.2 BPTC-227

Universal Joint Carbide Drill

22
 BH R T IY
TUBE TOOLS

1” - 6.1/2” Tube I. D.
Tube I.D. Drill Cone
INCH MM Assembly

1 25.4 DC-100
1.1/8 28.6 DC-112
1.1/4-1.3/8 31.7-35.0 DC-125
Drill/Cone Assembly
1.1/2-1.5/8 38.1-41.3 DC-150
1.3/4-1.7/8 44.5-47.6 DC-175

Tube I.D. Cutting Wheel

INCH MM Tools

1.1/2-1.13/16 38.1-46.0 BRCW-150

1.7/8-2.3/16 47.6-55.6 BRCW-187
2.1/4-3.1/8 57.1-79.4 BRCW-225 Rotating Cutting Wheel Tools
3.3/16-3.15/16 81.0-100.0 BRCW-312

[Link]
[Link]
Rigid Arm Flare Cone Tool
Tube I.D. Flare Cone
INCH MM Tools
1.3/4-4 44.5-101.6 BFCT-300
4-6.1/2 101.6-165.1 BFCT-301

Flexible Arm Flare Cone Tool

Tube I.D. Flare

INCH MM Brushes
1-2 25.4-51.0 BFBT-301
2-4 51.0-101.6 BFBT-501
4-8 101.6-203.2 BFBT-502 Thee Strand Flare Brush Five Strand Flare Brush

23
 BH R T IY
TUBE TOOLS
1/4” - 3” Tube I. D.

HIGH PRESSURE WATER JET CLEANING MACHINE AND PUMP

WATER JETTING MACHINE

[Link]
[Link]

HIGH PRESSURE WATER JETTING MACHINE

24
 BH R T IY

1/4” - 3” Tube I. D.
TUBE TOOLS

[Link]
Pressure Regulating Valve:
Regulate output pressure as required bypass excess water.

[Link]
on

Nozzle(Straight,Forward,Backward Firing Nozzels)

Flexible Lance:
To connect Foot Operated Valve to Nozzle specially designed to
withstand high [Link] diameter pipes to easily enter inside
ID of tubes.

Floot Valve:
To start-stop and control water flow throu

safety to avoid any accident.

To view demo of above machine please visit our below youtube link [Link]
(If you cannot click below then either copy and paste the same in the browser or scan below QR code)

25
 BH R T IY
1/4” - 3” Tube I. D.

TUBE TOOLS

= Stainless Steel Boiler = Detergent tank 4/5L

= Triplex pump with ceramic plungers, = Vertical stainless steel boiler cooling
[Link]

connecting rod system function driven by independent electric

[Link]

= Brass pump head motor,double heating coil with refractory

= Automatic by-pass valve cement base.
= Pressure gauge = 5m Electric cable
= Built-in detergent suction = Diesel tank 15L, with discharge plug
= Boiler shut-down delayed circuit = Water and diesel filters
= With safety pressure switch to shutdown = TSS, remote control for shutdown of
the boiler in case of lack of water high pressure cleaner
= Induction Three Phase motor with = Adjust high/low pressure and fan/pencil
thermal protector jet spray head
= Thermostat = Accessories Holder

26
 BH R T IY
TUBE TOOLS

7/8” - 6” Tube O. D.
‘BA' SERIES (3 PLAIN ROLLERS) 'BAF3' SERIES (3 PLAIN ROLLERS, 3 FLARE ROLLERS)

(PARALLEL TYPE TUBE EXPANDER) (FLARE TYPE TUBE EXPANDER)

Sizes Available : 7/8" O.D. to 4½” O.D. Sizes Available : 7/8" O.D. to 4½” O.D.
Models Available : BA-31 to BA-102 Models Available : BA-31 to BA-102

FEATURES: FEATURES:
Time tested, durable design. Sturdy construction Time tested, durable design.
with rolls self contained in cage. Best 'Value for Sturdy construction with rolls self contained in
Money' tool in the world when parallel rolling cage. Best 'Value for Money' tool in the world when
tubes. parallel rolling tubes.
Use - Economical tool used for applications where
'B114' SERIES tubes are to be expanded with flaring.

'BSB’ SERIES

[Link]
(4 Plain Rollers & 2 Flare Rollers)

[Link]
Sizes Available : 2" O.D. to 4½” O.D.

FEATURES:
Overlapping rolls prevent ridging of tube. Can be (TUBE EXPANDER WITH 5-Plain rollers)
converted for parallel expansion use enquire Sizes Available : 1.1/2" O.D. to 4½” O.D.
with us. Self retained rolls in cage. Models Available : BSB-00A TO BSB-27C
Use: General purpose expander for expanding
and flaring boiler tubes, water wall, downcomer, FEATURES:
economizer, riser, & air heater tubes. 'BSB' SERIES (Parallel Type- 5 Plain rollers)
LONG REACH ‘BCSB' SERIES ‘5-Roll’ Design is used primarily for rolling thin
walled tubes used in sugar mill pan, juice heaters
(Parallel Type- 5 Plain rollers)
etc.
‘5-Roll’ gives a more concentric, uniform
expansion vs a 3 roll expander in thin tubes &
reduces spring back action.
Time tested, durable design.
FEATURES:
Use: For TOP Plate Tube Expansion in Pan,
‘5-Roll’ Design is used primarily for rolling thin Juice heaters.
walled tubes used in sugar mill pan, juice heaters BCSB Series BSB Series
etc.‘5-Roll’ gives a more concentric, uniform 2 1

expansion vs a 3 roll expander in thin tubes &

reduces spring back action. Time tested, durable
design.
Use - For BOTTOM plate tube expansion in pan,
juice heaters in sugar mills.

(’BCSB’ TUBE EXPANDER WITH 5-Plain

rollers)
Sizes Available : 1.1/2" O.D. to 4½” O.D.
Models Available : BCSB-5 TO BCSB-24.

NOTE: We also manufacture other series of tube expander such as BAB, BABF3, B-1000, B-3000, combination beading
Type tube expander. We can also design & manufacture tube expander for tube OD up to 250mm (10”) or more.

27
 BH R T IY
1/4” - 1.1/4” Tube O. D.

'B900' SERIES ‘B1300’ SERIES TUBE TOOLS

Sizes Available : 1/4” O.D. To 3/8” O.D. Sizes Available : 3/8”

Tube Internal diameter : Tube Internal diameter :
3.8mm (0.152”) to 8.4mm (0.331”) 5.8mm (0.231”) to 8.4mm (0.331”)
Roller Length of Tube Expander : Roller Length of Tube Expander:
3/4” (19.05mm) & 1.1/4” (31.75mm) 3/4” (19.05mm) & 1.1/4” (31.75mm)

FEATURES: FEATURES:
This tool has been the work horse for several Use - Oil coolers, Radiators, & other apparatus
years for use on small diameter tubes. with small diameters tubes & thick tube sheets.
Use - Oil coolers, Radiators, & other apparatus NOTE: All ‘B1300’ series expanders come with
with small. 1/4” square mandrel drives. Round mandrel drives
are optional.
'B800’ SERIES
'B1200’ SERIES LONG REACH
[Link]

Sizes Available :
[Link]

Sizes Available : 1/2” O.D. to 1.1/2” O.D.

1/2” O.D. to 1.1/2” O.D.
Tube Internal diameter :
Tube Internl diameter :
8.4mm (0.334”) to 36.3mm (1.43”)
8.4mm (0.334”) to 36.3mm (1.43”)
Roller Length of Tube Expander:
Roller Length of Tube Expander:
1.1/2” (38.1mm) & 2.1/4” (57.1mm)
1.1/2” (38.1mm) & 2.1/4” (57.1mm)
FEATURES:
FEATURES:
Use -This is the most popular expander for use on
heat exchangers and condensers with tubes of Use -This is recommended for heat exchanger &
½”- 1.1/2” O.D. condenser with tubes of 5/8”- 1.1/2” O.D. & thick
tube sheets.
TUBE SHEET ADJUSTABLE RANGE:
FOR 1.1/2” ROLLER LENGTH: 1 /2” to 1.1/2” TUBE SHEET ADJUSTABLE RANGE:
FOR 2.1/4” ROLLER LENGTH: 1.1/4” to 2.1/4” FOR 1.1/2” ROLLER LENGTH: 1.1 /2” to 12”
FOR 2.1/4” ROLLER LENGTH: 2.1/4” to 12.3/4”
'B8012’ SERIES
VERNAN TUBE EXPANDER

BS-SERIES

Sizes Available : 1.3/4” O.D. to 8” O.D.

BA-SERIES
Tube Internal diameter :
36.1mm (1.420”) to 190mm (7.48”) Sizes Available : a.½”- 2” O.D.
Tube Internal diameter :
Roller Length of Tube Expander: 2.1/4” 57.1mm)
8.22mm (0.324”) to 50.8mm (2”)
FEATURES: FEATURES:
Use -This is recommended to expand tubes in air Use -This is recommended to expand Stainless
heaters boilers , & refinery still tubes. Can be used Steel thick tubes in heat exchanger having tube
to expand thick tube sheets (Upto 8”) TUBE sheet up to 2.1/2”(63.5mm)
SHEET ADJUSTABLE RANGE:
TUBE SHEET ADJUSTABLE RANGE:
FOR 2.1/4” ROLLER LENGTH: 1 /2” to 8”
FOR 2.1/4” ROLLER LENGTH: 1 /2” to 8”.

28
 BH R T IY
TUBE TOOLS

1/4” - 3” Tube O. D.
TUBE ROLLING CONTROL

Voltage
Model No. Weight (KG)
Single Phase 50/60 Hz

TCW-09-110 110 V 11.0

TCW-09-230 230 V 11.0

[Link]
[Link]
MPG-0N MPG-1N MPG-2N MPG-3N

FULL LOAD
DRIVE MODEL EXPANSION RANGE CURRENT APMS DRIVE
NO LOAD
SPEED R.P.M. WEIGHT
S. STEEL COPPER
230V 110V TUBE O.D. TUBE O.D.
230V 110V KGS.

MPG-0N MPG-0L 2800 6 to 10 6 to 12 2.6 2.6 2.0

MPG-1N-I MPG-1L-I 1000 10 to 16 13 to 20
6.0 6.0 2.5
MPG-1N-II MPG-1L-II 1900 8 to 13 11 t o16
MPG-2N-I MPG-2L-I 480 16 to 45 16 to 50
12.0 12.0 7.5
MPG-2N-II MPG-2L-II 1080 16 to 32 16 to 38
MPG-3N-I MPG-3L-I 130 25 to 76 25 to 102
12.0 12.0 8.5
MPG-3N-II MPG-3L-II 430 25 to 50 25 to 76

To view demo of above machine please visit our below youtube link [Link]
(If you cannot click below then either copy and paste the same in the browser or scan below QR code)

29
 BH R T IY
1.1/4” - 4” Tube O. D.

TUBE TOOLS

HYDRAULIC PUMP BHEP-500

[Link]

Hydraulic Pump Model

[Link]

BHEP-300 BHEP-500 BHEP-1000

Oil tank capacity ( Litres) 30 80 138
Hydraulic Oil SAE VG 68 SAE VG 68 SAE VG 68
Net Weight (Kgs) 80 100 220
Maximum Working Pressure (bar) 100 100 100
Electrical Motors 3 hp., Single phase 5 hp., Three phase 10hp., Three phase
Voltage 230v / 110v 415V 415V
Overall Dimensions (mm) 610 x 270 x 985 820 x 470 x985 1775 x 550 x 1200
Standard Hose Size (Length) ½”(10 mtrs.) ½”(10 mtrs.) ½”(10 mtrs.)

Drive No Load Speed

Tube Expansion Range
(RPM) Drive
Weight
Steel Tube O.D. Copper Tube I.D. Square Socket With BHEP
Model No. KGS.
INCH 300 / 500 / 1000
MM INCH MM INCH
15-25 5/8-1 25-38 1-1.1/2 BHED-3 3/8 620 / 954 / 800 9.6
1.1/4-2.5 9.7
19-38 3/4-1.1/2 32-64 BHED-4 3/8 & 1/2 350 / 480 / 400
2-4 11.0
38-76 1.1/2-3 50-102 BHED-5 1/2 & 3/4 62 / 84 / 70
50-102 2-4 - - BHED-6 3/4 & 1 40 / 62 / 54 11.5

To view demo of above machine please visit our below youtube link [Link]
(If you cannot click below then either copy and paste the same in the browser or scan below QR code)

30
 BH R T IY
TUBE TOOLS

3/8” - 4” Tube O. D.
Tool Bit
1/8” x 3/8” x 1/8”
or
1/8” x 1/4” x 1/8”

[Link]
[Link]

31
 [Link]

32
[Link] 3/8” - 4” Tube O. D.

TUBE TOOLS
BH R T IY
 BH R T IY
TUBE TOOLS

1/2” - 3” Tube O. D.
BH R T IY
TUBE TOOLS

STPP-300

Oil Tank Net Wt. Hyd. Hoses

Volts / Power Dimension
Model Capacity Size x Length
Phase
HP/KW LTRS. KGS. MM INCH x MTRS.

[Link]
STPP - 300 230/1 2.25/1.5 10 68 510 x 370 x 680 1/4”x 5 Twin Jack Hose

[Link]
STPP - 300
– – 10 65 510 x 370 x 680 1/4”x 5 Twin Jack Hose
(Pneumatic)

Note:Max.W

Pulling Max. Tube Stub Pulling Weight Free Pulling Speed

Gun Model Capacity O.D. Thru Capacity (Meter / Min) with
KGS. LBS.
TUBE TOOLS
BH RT IY

Tons Gun INCH INCH STPP-300

SHPG-15 15 1 1.1/2 18 40 3.3

SHPG-30 30 1.1/2 3 25 55 2.0
SHPG-45 45 3 4 51 112 1.3

SPRING BALANCER

Balancer Range For Pulling Weight

Model
KGS. LBS. Gun Model KGS. LBS.
BSEW-22 15-22 33-48 SHPG-15 8.0 17.6
BSEW-30 22-30 48-66 SHPG-30 9.0 19.8
BSEW-60 50-60 110-132 SHPG-45 12.0 26.4

To view demo of above machine please visit our below youtube link [Link]
(If you cannot click below then either copy and paste the same in the browser or scan below QR code)

33
 BH R T IY
1/2” - 3” Tube O. D.

SPRING BALANCER
TUBE TOOLS

BJ JAW SET- REAR A

B
IMP
IMPACT WRENCH

BS SOCKET

BM MANDREL

BC COLLAR

Suited For Mandrel Weight

[Link]

Model A B
Model Numbers KGS. LBS.
[Link]

IMP-1 BM-7 to BM-37 5.0 11.0 3/4” 3/8”

IMP-1 BM-19 to BM-95/102 10.5 23.0 1” 1/2”

Model A B Model A B

BS-1 3/4” 3/8” BS-5 3/4” 1”

BS-2 3/4” 1 /2” BS-6 1” 3/4”
BS-3 3/4” 5/8” BS-7 1” 1
BS-4 3/4” 3/4” BS-8 1” 1.1/2”

688
BM MANDREL BJ JAW SET BC COLLAR

34
 BH R T IY
TUBE CLEANER SELECTION GUIDE TUBE TOOLS

Vessel Type of Tube Deposit Machine Cleaning Tools

Heat Exchanger Non-Ferrous Straight 1/4”-1” (6.4-25.4mm) Soft Deposits BPC-3, BPC-4, BPC-P Nylon Brush
Condenser
Heat Exchanger Non-Ferrous Straight 1/4”-1” (6.4-25.4mm) BPC-4, BPC-5
Medium to Hard Scale Carbide Drill
Condenser
Heat Exchanger Non-Ferrous U-Tube ½”-1”(12.7-25.4mm) Soft Deposit BPC-3, BPC-4, BPC-P Cup Brush, Wheel Brush
Condenser
Heat Exchanger Non-Ferrous U-Tube ½”-1”(12.7-25.4mm) Hard Scale or Blockage BPC-5, BPC-6 Cobalt Tip Top
Condenser
Heat Exchanger Ferrous Straight 1/4”-1”(6.4-25.4mm) Soft Deposit Light Scale BPC-3, BPC-4, BPC-P Stainless Steel brush
Condenser
Heat Exchanger Non-Ferrous U-Tube ½”-1”(12.7-25.4mm) BPC-5, BPC-6 Carbide Drill, Wheel Brush Toll
Too Hard Scale
Condenser
Heat Exchanger Non-Ferrous U-Tube ½”-1”(12.7-25.4mm) Soft Deposit light Scale BPC-4, BPC-5, BPC-P Cup Brush, Wheel Tool
Condenser
Heat Exchanger Non-Ferrous Straight 1/4”-1” (6.4-25.4mm) Hard Scale or Blockage BPC-6 Cobalt Tip Tool
Condenser
Heat Exchanger Non-Freeous or Ferrous Straight Buffing Tool with Drill Tip, Drill
Medium to hard Scale BC-10 with Hollow Tube
Condenser
Heat Exchanger Ferrous 3/16”-3/8” I.D.(4.8-9.5mm) Hard Scale Blockage BC-10 Hollow Drills (other diameters and lengths available on request.
Condenser
Heat Exchanger Non-Ferrous or Ferrous Straight 3/16”-3/8”I.D. Hard Scale Blockage BC-315 Carbide Drills
Condenser
Heat Exchanger 7/8”-2” I. D. (22.2-51.0mm) BC-10
Choked Tubes Carbide Drills
Condenser
Heat Exchanger Non-Ferrous or Ferrous Straight Medium to Hard Scale BC-10 with Hollow tube Carbide Drills
Condenser
Heat Exchanger 3/16”-1” I. D. (4.8-25.5mm) Deposit BPC-5, BPC-6 Buffing tool, Wing Tool-Flexible Arm-Carbide ball Tip,
Condenser
Heat Exchanger Non-Ferrous Straight 1”-14” I. D. Soft Deposit BPC-5 carbon Steel Brush
Condenser
Heat Exchanger Ferrous Straight 1”-14” I.D.(25.4-355.6mm) Soot and Light Scale BFM-50, BFM-75 Double spiral brush, Tool Head Cutter
Condenser
Fire Tube Boiler Straight Steel 1.3/8”-4” O. D. (35.0-101.6mm) Soft & Light Scale BPC-5, BPC-6 Nylon Brush and plastic Brush

[Link]
Fire Tube Boiler Straight Steel 1.3/8”-4” O. D. (35.0-101.6mm) Medium To Hard Scale BPC-5 Buffing Tool, CBTS Series Brush
Vacuum Pan, Straight Steel 1.3/8”-4” O. D. (35.0-101.6mm) Medium To Hard Scale BFM-30 Scraper Tool, Cone Cutter Tool, Wing Tool-Stif Arm Cutter

[Link]
JuiceHeater
Vacuum Pan, Ferrous Straight 1.18”-1.49” I.D. (30.0-38.0mm) Soft Deposits, light Scale BFM-50 HZ Cutter, H Cutter, TH Brush, WBA brush, DS Brush
JuiceHeater
Vacuum Pan, Ferrous Straight 1.53”-2.55” I.D. (38.4-65.0mm) Medium to Hard Scale BFM-75 DS Brush, WEB Brush
JuiceHeater
Water Tube Boiler Ferrous Straight 2.59”-3.93” I.D. (66.0-100.0mm) Medium to Hard Scale BFM-50 Tool Head Cutter, Wing Tool-Flexible Arm-Carbide Ball

Water Tube Boiler Straight Steel 1”-3.1/4” I.D. (25.4-82.6) Hard Scale BFM-50 Tool Head Cutter, Turk Head Brushes

MORE
THAN
60%
OF
OUR
PRODUCTS
EXPORT
ACROSS
THE
GLOBE
WE EXPORT TO MORE THAN

55 COUNTRIES

Model Tube Size Motor Power Source Speed

BPC-3 1/4”-1” I.D (6.4-25.4mm) 3/4 HP (0.60kW) Electric 110 or 220v, 50 or 60 Hz 910 rpm
BPC-4 1/4” & UP (6.4mm & UP) 1 HP (0.75 kW) Electric 110 or 220v, 50 or 60 Hz 910 rpm
BPC-5 1/4”& 1.1/2” (6.4mm-38.1mm) 2 HP (1.50kW) Electric 110 or 220v, 50 or 60 Hz 910 rpm
BPC-6 1/4”& 1.1/2” (6.4mm-38.1mm) 2 HP (1.50kW) Electric 110 or 220v, 50 or 60 Hz 1440 rpm
BPC-P 1/4”-1”I.D. (6.4mm-25.4mm) 1/2 HP (0.40kW) Electric 110 or 220v, 50 or 60 Hz 1440 rpm
BC-10 1/2” - 1.1/4” (12.7mm-32.0mm) 0.6 HP (0.45kW) Air:Min.60psi@16cfm 700rpm
BC-750 7/8”-2” (22.1mm-50.8mm) 1HP (0.75kW) Air:Min.90psi@20cfm 1000 rpm
BFM - 30 0.86”-1.1/2” ( 22.0mm-38.1mm) 3HP (2.238kW) Electric 440 or 220v, 50 or 60 Hz 2800rpm
BFM -50 1.1/2”-4” ( 38.1mm-101.6mm) 5HP (3.73kW) Electric 440 or 220v, 50 or 60 Hz 2800rpm
BFM -75 1.1/2”-6” ( 38.1mm-152.4mm) 7.5HP (5.62kW) Electric 440 or 220v, 50 or 60 Hz 2800rpm

35
 Our Major Clients
Please see below our robust and valued client list that uses BHARTIYA products repeatedly.
We take pride in our partnerships and the ability to grow with such amazing group of companies.

Authorised Dealer
Manufactuer & Exporter of Tube Cleaners, Flexible Shafts,Tube Tools,Pipe Bevelling Machines,
Torque Tools, Grinding Tools, Tapping Tools.
A-48 B Osiya Mataji Compound,Village Kalher, Retibunder Road, Tal. Bhiwandi,Dist. Thane - 421302, Maharashtra,

+91 22 25854509 | + 91 90290 05461 +91 22 25883527 bharatflex@[Link] | spradip@[Link]

[Link]