Scribd
Upload
16 views2 pages

README

This document provides installation instructions for the INI-9100/9100W Windows-NT device driver, detailing the necessary files and steps for both new installations and adding the driver to an existing setup. It outlines the process for booting from floppy or CD-ROM, selecting custom setup options, and loading the driver. Additionally, it includes steps for updating the device driver within the system directory.

Uploaded by

nn
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
16 views2 pages

README

This document provides installation instructions for the INI-9100/9100W Windows-NT device driver, detailing the necessary files and steps for both new installations and adding the driver to an existing setup. It outlines the process for booting from floppy or CD-ROM, selecting custom setup options, and loading the driver. Additionally, it includes steps for updating the device driver within the system directory.

Uploaded by

nn
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 2

INI-9100/9100W Windows-NT device driver Installation

====================================================

FILES YOU NEED:


script files for installation:
txtsetup.oem, oemsetup.inf, disk1.
device driver:
ini910.sys

INSTALLATION:

A: Install Windows-NT on a hard drive from the INI-9100/9100W SCSI Host


adapter :
-------------------------------------------------------------------------
1. If you are installing Windows-NT from a floppy drive, locate the
Windows-NT Disk 1 for Floppy Installation. Make a backup copy of
this diskette.

2. If you are installing Windows-NT from a CD-ROM drive, locate the


Windows-NT Setup Disk for CD-ROM Installation. Make a backup copy
of this diskette.

3. Put the disk into drive A and turn on your computer.

4. Follow the instruction, select "CUSTOM SETUP".

5. Select "OTHER" from the list of "Additional Scsi Adapters". A


message will appear on screen stating that, "Requires disk provided
by a hardware manufacture". Insert the diskette containing
INI-9100/9100W device driver and press ENTER.

6. WIndows-NT will interpret txtsetup.oem and oemsetup.inf script


files and load ini910.sys driver to xxx/system32/drivers directory.
( Assume xxx is the root directory for WIndows-NT).

B: Adding INI-9100/9100W host adapter to existing Windows-NT booted from IDE


drive or different type of host adapter:
-------------------------------------------------------------------------

1. Boot up Windows-NT.

2. Select "Windows NT SetUp" from the "MAIN" group.

3. Select "Options".

4. Select "Add/remove SCSI Adapters" from the list of available options.

5. Select "Add" to add a host adapter driver.

6. Select "Others" from the list of driver providers.

7. Insert INI-9100/9100W driver diskette into drive A: then select "OK".

8. WIndows-NT will interpret txtsetup.oem and oemsetup.inf script


files and load ini910.sys driver to xxx/system32/drivers directory.
( Assume xxx is the root directory for WIndows-NT).

9. Exit the Windows-NT Setup program and reboot the system to include
the INI-9100/9100W driver for Windows-NT in the initialization routine.

-C: Updating device driver ini910.sys:


-------------------------------------------------------------------------
( Assume "xxx" is the system root directory of the Windws NT )

1. Copy new ini910.sys to xxx/system32/drivers.

2. If Boot drive is a SCSI drive, and you are using WIndows-NT 3.1,
(You don't need this step for Windows-NT 3.5)
a. Type "attrib -r -s -h c:\ntbootdd.sys"
b. Copy new ini910.sys to c:\ntbootdd.sys.
c. Type "attrib +r +s +h c:\ntbootdd.sys".

3. Reboot the system.

You might also like