ФОП Томчук Андрій Михайлович
Головний офіс: 10007, м. Житомир, вул. Коростишівська, 45
РНОКПП 3041324133
тел.: +38 (067) 411-44-10
Комерційна пропозиція (098) 885-55-59
Генератор дизельний KOHLER-SDMO B900
Модель KOHLER-SDMO B900
Двигун / тип палива BAUDOUIN 12M26G900_5 / Дизель
Альтернатор KOHLER KH02970T
Рік виготовлення 2022
Стан / напрацювання Новий
Мінімальна номінальна потужність 818 кВА / 654 кВт
Максимальна номінальна потужність 900 кВА / 720 кВт
Напруга 400/230 В, 50 Гц
Габаритні розміри Д х Ш х В, мм 6413 x 2160x 2753
Вага 9700 кг
Виконання Закрите
Об’єм паливного баку 1035 л
Країна виробник Франція
Ціна (з ПДВ) 169 000 $
ФОП Томчук Андрій Михайлович
Юридична адреса: 12424, Житомирська обл., Житомирський район, с. Висока Піч, вул. Чуднівська, буд. 2
IBAN: UA04 3802 8100 0000 0260 0910 4240 1 в АТ «Банк інвестицій та заощаджень», МФО 380281
www.pack-trade.com, www.atom-attachments.com
Industrial Diesel Generator Set – B900
50 Hz
RATINGS 400 V - 50 Hz
Standby kVA 900
kWe 720
Prime kVA 818
kWe 654
Benefits & features GENERAL SPECIFICATIONS
Engine brand BAUDOUIN
KOHLER premium quality
Alternator commercial brand KOHLER
KOHLER provides one source responsibility for the
generating set and accessories Voltage (V) 400/230
The generator set, its components and a wide range of Standard Control Panel APM403
options have been fully developed, prototype tested, Consumption @ 100% load ESP (L/h) * 188
factory built, and production tested Consumption @ 100% load PRP (L/h) * 170
The generator sets are designed in accordance to Emission level Fuel consumption optimization
ISO8528
Type of Cooling Mechanical driven fan
Approved for use with HVO (Hydrotreated Vegetable Oil)
Performance class G2
according to EN15940
KOHLER premium performances
Engines GENERATOR SETS RATINGS
High reliability enhanced through a simple design for Standby Rating Prime Rating
optimal functional performances
Voltage PH Hz kWe kVA Amps kWe kVA
High performances turbochargers providing high engine 415/240 3 50 690 863 1201 628 785
performances under all loads B900 400/230 3 50 720 900 1299 654 818
Easy operation and maintenance: accessories requiring 380/220 3 50 720 900 1367 654 818
daily maintenance are conveniently located on the same DIMENSIONS COMPACT VERSION
side of the engine Length (mm) 4417
Alternator
Width (mm) 1740
Provide industry leading motor starting capability
Excitation system to permit sustained overcurrent > Height (mm) 2384
300% In, during 10 sec Tank capacity (L) 500
Built with a class H insulation and IP23 Dry weight (kg) 7470
Cooling
DIMENSIONS SOUNDPROOFED VERSION NA
A compact and complete solution using a mechanical
driven fan radiator Type soundproofing NOT AVAILABLE
High temperature and altitude product capacity Length (mm) 6413
available Width (mm) 2160
Control Panel
Height (mm) 2753
The KOHLER wide controller range provides the
reliability and performances you expect from your Tank capacity (L) 1035
equipment. You can program, manage and diagnose it Dry weight (kg) 9700
easily and in an efficient way Acoustic pressure level @1m in dB(A) 50Hz
86
(75% PRP)
KOHLER worldwide support Acoustic pressure level @7m in dB(A) 50Hz
A standard two-year or 1000-hours limited warranty for 77
(75% PRP)
standby applications. °°°°°
A standard one-year or 2500 hours limited warranty for * Volumetric Fuel consumption is up to 4% higher when using HVO than
Diesel Fuel
prime power applications.
A worldwide product support
Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction
set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit.
Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to
instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield
different results. Data and specifications subject to change without notice.
Industrial Diesel Generator Set – B900
50 Hz
Engine
General Lubrication System
Engine brand BAUDOUIN Oil system capacity including filters (l) 114
Engine ref. 12M26G900_5 * Min. oil pressure (bar) 2
Air inlet system Turbo Max. oil pressure (bar) 7
Fuel Diesel Fuel/HVO Oil sump capacity (l) 109
Fuel consumption Oil consumption 100% ESP 50Hz (l/h) 0,5660
Emission level
optimization
Cylinder configuration V Air Intake system
Number of cylinders 12 Max. intake restriction (mm H2O) 663
Displacement (l) 31,81 Combustion air flow (l/s) 1000
Bore (mm) * Stroke (mm) 150 * 150 Exhaust system
Compression ratio 15.7 : 1 PRP ESP
Speed 50Hz (RPM) 1500 Exhaust gas temperature (°C) 550 550
Maximum stand-by power at rated RPM (kW) 793 Exhaust gas flow (L/s) 2298 2245
Charge Air coolant Air/Air Max. exhaust back pressure (mm H2O) 765
Injection Type Direct Cooling system
Governor type Electronic Radiator & Engine capacity (l) 108
Air cleaner type, models Dry Fan power 50Hz (kW) 30
Fuel system Fan air flow w/o restriction (m3/s) 24
Maximum fuel pump flow (l/h) 595 Available restriction on air flow (mm H2O) 20
Fuel Inlet Minimum recommended size (mm) 14 Type of coolant Gencool
Fuel Outlet Minimum recommended size (mm) 14 Coolant capacity HT, engine only (l) 191
Max head on fuel return line (m fuel) 5,90 Max coolant temperature, Shutdown (°C) 103
Maximum allowed inlet fuel temperature (°C) 70 Thermostat begin of opening HT (°C) 77
Thermostat end of opening HT (°C) 87
Consumption with cooling system
Specific consumption @ ESP Max Power
202,10
(g/kW.h)
Specific consumption @ PRP Max Power
201,30
(g/kW.h)
Specific consumption @ 75% of PRP Power
205,60
(g/kW.h)
Specific consumption @ 50% of PRP Power
210,50
(g/kW.h)
* Engine reference may be partially modified depending on genset
application, options selected by the customer and lead time required.
Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction
set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit.
Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to
instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield
different results. Data and specifications subject to change without notice.
Industrial Diesel Generator Set – B900
50 Hz
Alternator Specifications Alternator Standard Features
Alternator commercial brand KOHLER - All models are brushless, rotating-field alternators
Kohler Alternator description KH02970T
- NEMA MG1, IEEE, and ANSI standards compliance for
Number of pole 4
temperature rise and motor starting
Number of bearing Single Bearing
Technology Brushless
- The AVR voltage regulator provides superior short
circuit capability
Indication of protection IP23
Insulation class H - Self-ventilated and dip proof construction
Number of wires 12 - Sustained short-circuit current of up to 300% of the
AVR Regulation Yes rated current for up to 10 seconds
Coupling Direct - Superior voltage waveform
Capacity for maintaining short circuit
Yes
at 3 ln for 10 s Note: See Alternator Data Sheets for alternator application data
Application data and ratings, efficiency curves, voltage dip with motor starting
Overspeed (rpm) 2250
curves, and short circuit decrement curves.
Power factor (Cos Phi) 0,80
Voltage regulation at established
0,50
rating (+/- %)
Wave form : NEMA=TIF <40
Wave form : CEI=FHT <2
Total Harmonic Distortion in no-load
3,1
DHT (%)
Total Harmonic Distortion, on linear
2,8
load DHT (%)
Recovery time (Delta U = 20%
200
transcient) (ms)
Performance datas
Continuous Nominal Rating 40°C
820
(kVA)
Unbalanced load acceptance ratio
8
(%)
Peak motor starting (kVA) based on x% voltage dip power factor at 0.3
Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction
set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit.
Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to
instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield
different results. Data and specifications subject to change without notice.
Industrial Diesel Generator Set – B900
50 Hz
Dimensions compact version with baseframe fuel tank
Length (mm) * Width (mm) * Height (mm) 4417 * 1740 * 2384
Dry weight (kg) 7470
Tank capacity (L) 500
M427 - Dimensions soundproofed version
Length (mm) * Width (mm) * Height (mm) 6413 * 2160 * 2753
Dry weight (kg) 9700
Tank capacity (L) 1035
Acoustic pressure level @1m in dB(A) 50Hz (75% PRP) 86
Sound power level guaranteed (Lwa) 50Hz (75% PRP) 107
Acoustic pressure level @7m in dB(A) 50Hz (75% PRP) 77
* dimensions and weight without options
Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction
set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit.
Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to
instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield
different results. Data and specifications subject to change without notice.
Industrial Diesel Generator Set – B900
50 Hz
BASIC GENERATING SET AND POWER PLANT CONTROL
The APM403 is a versatile control unit which allows operation in manual or
APM403 automatic mode
- Measurements : voltage and current
- kW/kWh/kVA power meters
- Standard specifications: Voltmeter, Frequency meter.
- Optional : Battery ammeter.
- J1939 CAN ECU engine control
- Alarms and faults: Oil pressure, Coolant temperature, Overspeed, Start-
up failure, alternator min/max, Emergency stop button.
- Engine parameters: Fuel level, hour counter, battery voltage.
- Optional (standard at 24V): Oil pressure, water temperature.
- Event log/ Management of the last 300 genset events.
- Mains and genset protection
- Clock management
- USB connections, USB Host and PC,
- Communications : RS485 INTERFACE
- ModBUS protocol /SNMP
- Optional : Ethernet, GPRS, remote control, 3G, 4G,
- Websupervisor, SMS, E-mails
Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction
set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit.
Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to
instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield
different results. Data and specifications subject to change without notice.
