HO/Factory : Jl. Rungkut Industri III/56, Surabaya 60293, Indonesia.

Phone : 62-31-8438703 Fax : 62-31-8438350. Web page : http://www.bambangdjaja.com

SCHEDULE OF PARTICULARS

CUSTOMER : DOC No. : TR-C3NA7A41-OBAA.SCH

DATE :
QUANTITY : Pc

TYPE : Indoor - Oil Immersed COOLING : X ONAN ONAF

STANDARD : X IEC 60076 ANSI C.57 SPLN 50 - 1997

ELECTRICAL RATING :
Capacity : 800 kVA Frequency : 50 Hz
Number of Phase : 3 Phase For 1 Phase : CSP NON - CSP

Nominal Voltage (No Load) : HV Winding 20000 Volt LV winding 400 Volt
Connection : HV Winding Delta LV winding Wye Neutral
Full Load Current : HV Winding 23.09 Amp LV winding 1154.70 Amp
Edition HV Tapping : + 2 x 2.5 %
- 2 x 2.5 %
Vector Group : Dyn5
Insulation Temp. Class : A
HV LV
Highest Voltage for Equipment : 24 kV 1.1 kV
Applied Test Voltage : 50 kV 3 kV
Lightning Impulse (BIL) : 125 kV - kV

Induced Voltage Test is applied 2 times of the rated voltage at 200 cycles per second for 30 seconds

ELECTRIC TEST PERFORMANCE AT TAP 3 :

% Load Full Load Loss Efficiency (%)
at 75 °C (Watts) at PF = 1 at PF = 0.8
100 8100 98.81 98.52
75 4556.3 99.00 98.75
50 2025.0 99.13 98.91
25 506.3 99.01 98.76
No Load Losses : 1500 Watts
No Load Current at Rated Voltage : 2.5 %
Short Circuit Impedance : 4.50 %
X/R Ratio : 4.33
Noise Level : 57 dB (Sound Pressure Level at 0.3 m)
Temperature Rise
Winding : 65 °C
Oil : 60 °C
at PF = 1 at PF = 0.8
Voltage Regulation at Full Load : 1.11 % 3.48 %
Secondary Voltage at Full Load : 395.5 Volt 386.1 Volt

CONSTRUCTION & MATERIAL

Tank Type : Totally Oil Filled Mounting : Ground Mounted
Radiator : Panel X Corrugated
HV Bushing Type : Plug - In Position : Top Side
LV Bushing Type : Porcelain
HV Winding Material : Copper
LV Winding Material : Copper
Insulation Oil : Mineral

(**) APPROXIMATE DIMENSION w/o PACKING : Refer to Drawing

(**) Weight and Dimension are approximate only and will vary according to the accessories supplied. Outline drawing will be
submitted to the customer later on.

This drawing is property of PT. BAMBANG DJAJA . It must not be copied without prior written consent and must be returned
on request. The information shown on it is to be regarded as confidential and must not be disclosed to any third party.
 1 2 3 4 5 6
13 GROUND BASE w/ ROLLER
12 NAME PLATE DIAGRAM
11 TRADE MARK "B&D"
A 01 A
2W 2V 2U 2N 10 OIL FILLING VALVE

"B"
09 LV PORCELAIN BUSHING
180 180 180
08 EARTHING TERMINAL
07 CORRUGATED FINS

"A" 06 LIFTING LUGS

02 05 HV PLUG IN BUSHING
04 OIL DRAIN VALVE
03 OFF LOAD TAP CHANGER
02 INTEGRATED SAFETY DETECTOR (ISD)
03
B 01 PRESSURE RELIEF DEVICE
B
NO Description

"C"
04
"D" 280 280
1W 1V 1U
VIEW "A"
TOP VIEW 05
C C

09
06
10

D 11 D

1480
07 12

08
13
E
660 660
1620 970 VIEW "B"
VIEW "D" VIEW "C" -All dimension in mm
-Bolted Main Cover
-Tank Type
-Cooling Type
: HERMETICALLY SEALED
: ONAN
-Untanking Part Weight
-Oil Weight / Mineral Oil
: 1270 Kg
: 405 Kg ( 450 Ltr)
-Total Weight :

2245 Kg
-Dimension Tolerance 3% -Finishing : BS 381 C632 -Tank and Fitting Weight : 570 Kg
Scale :
-
Format :
A3
Drawing Number :
- - -
TR-C3NA7A41-OBAA-B
Rev. Modification Date Approved
F Drawing Title : Customer and destination :

800 kVA Dyn5 CU-CU

Drawn by :
15/10/2022 FND
ASBUILT DRAWING OUTLINE DRAWING 800kVA Type B
Checked by :
15/10/2022 DHV
The number and type of cooling facilities (radiators and fans) on the transformer might be changed after testing Approved by :
This drawing is not a final drawing and will be replaced with the final one as built drawing at the end of project Power Transformer | 800 kVA | HV 20000 V | LV 400 V | Dyn5 | 50 Hz 15/10/2022 STY

1 2 3 4 Drawing remain the property of PT. Bambang Djaja, Reproduction is not Allowed with any reasons. Sheet 1 of 1 Rev 0
 1 2 3 4

NAME PLATE
A

OPERATION TYPE INDOOR FREQUENCY (Hz) 50

COOLING ONAN RATED POWER (kVA) 800
HIGH VOLTAGE (V) 20000 HV CURRENT (A) 23.09
4DIA-4HOLES

LOW VOLTAGE (V) 400 LV CURRENT (A) 1154.70

IMPEDANCE 75°C (%) AMBIENT TEMP (°C) MAX. 40
B.I.L HV / LV (kV) 125 / - TEMP. RISE (°C) 60 / 65
TOTAL WEIGHT (kG) OIL VOLUME (L)
SERIAL NO. YEAR OF MFG.

118

130
C

Tap 1 : 21000 V
1W 2W
Tap 2 : 20500 V 1U 2W
2V
Tap 3 : 20000 V 1V 2V
2U 2N
Tap 4 : 19500 V 1W 1V 2U
1U 2N
Tap 5 : 19000 V

PT. BAMBANG DJAJA RUNGKUT INDUSTRI III/56, SURABAYA

D PHONE: (62) 31-8438703 FAX: (62) 31-8438350 MADE IN INDONESIA
6

6 118 6
130

Material : ALUMINIUM

Project i on: Scale :

- - - - -
- - - -
Drawing Number :
A4
- - - -
TR-C3NA7A41-OBAA.NPL
F Rev. Modification Date Approved
Drawing Title : Customer and destination: Drawn by :
- 01.04.19 NSD
NAME PLATE Checked by :
01.04.19 SRT
Approved by :
Distribution Transformer | 800 kVA| HV 20000 V | L V 400 V | D yn5 | 50 Hz SRT
01.04.19

Drawing remain the property of PT. Bambang Djaja, Reproduction is not Allowed wi th any reasons. Sheet 1 of 1 Rev. 0
 1 2 3 4

A
R14 99
99

139
12 - Hole
44
100
B 15 50 25

50 25
100
38
180

18 - 4 Hole

M42 X 2
346
405

C
92
<159

120
51
16

Tank Hole Diameter 85mm

90

D
140

45
90
45

120
12 - 4 Hole

Projection : Scale :

1:1
Format :

Trafo Number :
A4
- - - -
- - - -
-
Drawing Number :
- - - -

F Rev. Modification Date Approved

-
Drawing Title : Customer and destination : Drawn by :
22/04/2021 SFI
-
- ASLV 211.201 -
Checked by :
22/04/2021 -
Approved by :
Power Transformer | - MVA | HV - V | LV - V | - | - Hz 22/04/2021 -
Drawing remain the property of PT. Bambang Djaja, Reproduction is not Allowed with any reasons. Sheet 1 of 1 Rev 0