Ex.
No:
Date :
Study of Network Devices
Objective(s):
To understand working principle of network devices Hub, Switch, Routers and configure the following
using Cisco Packet Tracer
a) Building a Peer-to-Peer Network.
Design a Peer to peer network with minimum of 3 PC's and verify the connectivity from both the
ends using Packet Tracer.
b). Design a Simple LAN Network
Create a Simple LAN deign with 1 switch, 4 PC's, 2 laptops and verify the connections from all the
ends using Packet Tracer.
Introduction:
Study of following Network Devices in Detail
Repeater
Hub
Switch
Bridge
Router
Gate Way
Theoretical Background:
To know more about the above network devices, Refer textbook for detailed explanation.
a) Building a Peer-to-Peer Network with at least three hosts
Objective(s):
Design a Peer to peer network with minimum of 3 PC's and verify the connectivity from both the
ends using Packet Tracer.
Theoretical Background:
In Peer to Peer architecture every node is connected to other node directly for exchanging information
instead of connected to central server Every computer node is referred as peer and they do the job of
client as well as server both. Every peer provides services to other peers as well as uses services provided
by other peers.
Sample Diagram:
Page 2.1 of 2.7
1. Device Requirements:
1.
2.
3.
4.
2. Network Diagram for your experiment (draw the diagram either hand drawing/ms paint or any other
drawing tools)
3. Network Diagram (packet tracer diagram before configuration):
Page 2.2 of 2.7
4. Configuration details:
Device Name Interface Name IP Address Subnet mask
5. Commands used in each of the diagram (if any):
6. Output Diagram (Minimum 3 screenshot):
Page 2.3 of 2.7
Google Drive link of the packet tracer file (give view permission):
Link:
CONCLUSION (provide conclusion about this experiment):
Rubrics for Experiment Assessment:
Rubrics Good Normal Poor Marks
Created the Created the topology, Created wrong
topology, Identify Identify the proper topology, Failed to
Creation of
the proper devices devices, making the Identify the proper
Topology (4)
and making the connections But missing devices and making
connections (4) some features (3) connections (1)
Verify the Verified the Verified the connectivity Verified the
connectivity connectivity in all at some levels (only some connectivity is not
(4) the levels (4) nodes) (2) done. (1)
Timely Completed the lab Completed the lab after Did not submitted
Completion before the allotted the deadline (1) before grading (0)
(2) time (2)
Total
Page 2.4 of 2.7
b). Design a Simple LAN Network.
Objective(s):
Create a Simple LAN design with minimum of 1 switch, 4 PC's, 2 laptops and verify the connections from
all the ends using Packet Tracer.
Sample Design:
1. Device Requirements:
1.
2.
3.
4.
2. Network Diagram for your experiment (draw the diagram either hand drawing/mspaint or any other
drawing tools)
3. Network Diagram (packet tracer diagram before configuration):
Page 2.5 of 2.7
4. Configuration details:
Device Name Interface Name IP Address Subnet mask
5. Commands used in each of the diagram (if any):
6. Output Diagram (Minimum 3 screenshot):
Page 2.6 of 2.7
Google Drive link of the packet tracer file (give view permission):
Link:
CONCLUSION (provide conclusion about this experiment):
Rubrics for Experiment Assessment:
Rubrics Good Normal Poor Marks
Created the Created the topology, Created wrong
topology, Identify Identify the proper topology, Failed to
Creation of
the proper devices devices, making the Identify the proper
Topology (4)
and making the connections But missing devices and making
connections (4) some features (3) connections (1)
Verify the Verified the Verified the connectivity Verified the
connectivity connectivity in all at some levels (only some connectivity is not
(4) the levels (4) nodes) (2) done. (1)
Timely Completed the lab Completed the lab after Did not submitted
Completion before the allotted the deadline (1) before grading (0)
(2) time (2)
Total
Page 2.7 of 2.7
