www.fine-tek.

com

Rotary Paddle Level Switch

Worldwide Access
 INTRODUCTION

WORKING PRINCIPLE FEATURES

The purpose of the rotary paddle level switch is 1 Rugged sealing ring prevents dust from infiltrating
to detect the presence of solid/powdery material the housing body along the shaft.
in most kinds of tanks, bins and containers. 1 Adjustable torque.
The unit is usually located through a bin wall at If the rotary paddle encounters overloading, the
the top, middle or low level of a bin. During motor will automatically shut down the motor to
normal operation (no material present) a prevent damage to the inner mechanisms and
synchronous motor rotates the paddle at RPM. extend motor life.
When this paddle rotation is impeded by 1 Very suitable for small tanks and low density
material, surrounding the paddle, motor will stall materials
and cause the Micro-switch to change state 1 Adjustable and extendible shaft models available
(indicating an alarm or control). 1 A wide variety of paddles are available

APPLICATIONS BENEFITS
1 Plastics and synthetics 1 Airtight sealed device.
1 Chemicals and fertilizer 1 Outdoor and strenuous environment application
1 Pharmaceuticals 1 Stable and reliable performance.
1 Food and beverage, 1 Lightweight and easy to install
1 Agriculture and fodder mills/depots 1 Practically designed to allow maintenance, checks
1 Cement as well as ceramics and replacement
1 Power plants 1 Not necessary to remove the complete set from
1 Various incinerators the tank.

STRUCTURE
MOTOR
SHAFT OIL-SEAL
PADDLE BODY
BADY

MICRO
SWITCH

SHAFT COVER
BEARING
PADDLE CLUTCH
OIL-SEAL
CLUTCH CABLE MOTOR
BEARING

STANDARD TYPE SEX5 MINI TYPE SEX4

CABLE

CABLE GLAND TORQUE SPRING

PCB SPRING
LED
BODY
PADDLE

LED COVER

OIL-SEAL HOUSING

BEARING MOTOR
MINI TYPE SEX3
1
 WORKING PRINCIPLE & TORQUE ADJUSTING

CONTROL SWITCH
WORKING PRINCIPLE WHITE
M
1. A synchronous turning motor indicates the
Limit
tank or container’s material isn't obstructing BLACK
the paddles,C & L [COM & NC] are connected. SW.
NO.1
2. When the material is obstructing the paddles, BLUE L
C&L [COM & NC] are disconnected, C&H
[COM & NO] are connected and the motor's YELLOW C Limit
current is cut off. SW.
NO.2
3. When the material drops away from the RED H
paddles and the motor starts again C & L
[COM & NC] connect and the cycle has begun
once again.
TORQUE ADJUSTING MECHANISM
AND WIRING 1 Do not tamper with the spring as it may cause
The torque spring is applied to adjust the shaft the Rotary Paddle to malfunction.
output torque. Default settings aret "weak" and
can be adjusted to the customer’s target based Spring adjusting hole
on the tank contents and S.G. (special gravity) weakest
of the material. weak
Higher S.G. materials require stronger torque strong
settings. Start with high settings and slowly strongest
release the torque force until the appropriate
setting is found.
Resetting torque
adjusting spring SEX4
strongest
strong weakest
Status lights weak
weak
weakest
strong

strongest

L N NO COM
NC
Available: SEX5 AC TYPE

Resetting torque SEX2

adjusting spring

strongest
strong
Status lights weak
weakest

White Black Blue Yellow Red Green

AC: L N NC COM NO E
DC: V+ V-
Power Out

V+ V- NO COM
24Vdc NC
Available:SEX2/SEX4
Available: SEX5 DC TYPE
2
GENERAL TYPE - SEX5

1 Power source : (A)110Vac,(B)220Vac,(C)240Vac, 1 Connection : 1"PF screw or JIS 2-1/2"H5kg/cm2

(D)24Vac, 50/60Hz (E)24Vdc 1 Protection/ material : IP65 / ADC-12
1 Power consumption : 3W 1 Conduit : 1/2"PF
1 Contact capacity : SPDT, 5A/250Vac 1 Material density : 0.5 g/cm3
1 Rotary speed : 1 R.P.M.
1 Insulation test voltage : 2500V

SCREW TYPE
SE110 Series
Horizontal mounting SE110 Series SE111 Series
Operation Temperature (-20BC ~ 70BC)
Weight: 1.2 kg PCD130
4-f15
1"PF
f155
f10
FLANGE TYPE Split
pins
100 f98
SE111Series f98
100
Horizontal mounting Split
pins
f10
Operation Temperature (-20BC ~ 70BC)
30
Weight: 1.7 kg 30
L=103 1/2"PF
L=97 1/2"PF
238
4 138
238

SHAFT PROTECTIVE SE120 Series SE130 Series

TUBE TYPE
SE120 Series
f98
Horizontal /Vertical mounting f98
Operation Temperature (-20BC ~ 70BC)
Weight: 1.2 kg 1/2"PF
Standard Length: 1/2"PF 138

L--250mm (2.2 kg)

L--500mm (2.5 kg) 159 f155
L--750mm (2.8 kg)
Customized lengths available f155 PCD130 f10 4

4 Split
pins
SHAFT LENGTH 4-f15
f9
ADJUSTABLE TYPE PCD130
f27.2
SE130 Series 4-f15
Vertical mounting Split
pins f10 L=250~1000mm L=450~2000mm
f12.7
Operation Temperature (-20BC ~ 70BC)
Standard Length:
80
L– 460~630mm (2.5 kg)
L– 650~1000mm (2.8 kg) f8
L– 750~1200mm (3.0 kg) 65

Customized lengths available 30

100

3
GENERAL TYPE - SEX5

HI-TEMP TYPE
SE140 Series SE140 Series SE141 Series
Horizontal mounting
Temp. (-20BC ~ 200BC) f98 f98
Weight: 2.1 kg

1/2"PF 1/2"PF

HI-TEMP TYPE
189
PROTECTIVE TUBE TYPE 189
SE141 Series
Horizontal /Vertical mounting
f155 4 f155
Operation Temperature (-20BC ~ 200BC)
Standard Length (option): PCD130 PCD130
L--250mm (2.6 kg) Split
pins f10 4
L--500mm (2.9 kg) L=90
L--750mm (3.2 kg) 4-f15 f27.2
4-f15 30 f10 L=250~1000mm
Special length is made by order
100

80

65

HI-TEMP SHAFT
LENGTH ADJUSTABLE TYPE SE146 Series SE160 Series
SE146 Series
Vertical mounting
Operation Temperature (-20BC ~ 200BC) f98

Standard Length (option): f98

L– 450~630mm (3 kg)
L– 650~1000mm (3.3 kg) 1/2"PF
L– 750~1200mm (3.5 kg) 1/2"PF
Special length is made by order 189 135

f155 f155
CABLE WIRE TYPE
SE160 Series PCD130
f10
f10 4 PCD130 14
Vertical mounting
Operation Temperature (-20BC ~ 70BC) Split
pins
4-f15
Standard Length (option): f9 4-f15

L-- 450mm (2.5 kg)

L-- 650mm (2.8 kg) L=450~4000mm
L-- 750mm (3 kg) f12.7 L=450~2000mm f6
Special length is made by order
f28

f8

30
30
100
100

4
MODEL NUMBER / ORDER CODE COMPARISON TABLE

Model Number Order Code

SE110
SEX50000-AA
SE111
SE120 SEX50000-AB
SE130 SEX50000-AC
SE140 SEX50200-AA
SE141 SEX50200-AB
SE146 SEX50200-AC
SE160 SEX50000-AD

5
NEW / OLD PADDLE MODEL COMPARISON TABLE

New Figure Dimension(WxH) Old

W
B Rectangular shaped type 100x30 A
H

C 65x80 B
W
D Shovel shaped type 65x120 C
H
E 80x80 D

F Rectangular type, W 50x30 E

one sided
H

131

G Scimitar shaped type 100 100x131 F

30

H Folding type 28 200x28 J

200

f28
108
K Weights type 100x108 X
30
100

Scimitar shaped type(PC) 98

N 98x120

120

P Cross bladed type(PC) 31.4 80x32

80

6
PROBE LENGTH LIST FOR GENERAL TYPE
(WITH DIFFERENT PADDLES)

SE110 SE111 SE140

Product model
100
100 100

Paddle model 30
L=103 30 30
L=96 L=90

Rectangular
shaped type
100x30 L=103 L=96 L=90
W

Shovel shaped type 65x80 L=153 L=146 L=142

W 65x120 L=193 L=186 L=182

H 80x80 L=153 L=146 L=142

Rectangular type,
one sided

50x30 L=104 L=97 L=94

W

Scimitar
shaped type
131

100x131 L=204 L=198 L=194

100

30

Folding type
200x28 L=126 L=119 L=114
28
200

Scimitar
shaped type(PC)

98x120 L=175 L=168

98

Not suitable for high

120
temperature(>120°C)
Cross Stainless steel paddle
bladed type(PC) suggested
80x32 L=81 L=74
31.4
80

7
ORDER INFORMATION

05 06 10 11 12 13 14 15 16 17 18 19 20 21 22
General Type SEX 5 99 0 0 - A 9999999999999

05 06 Model
00: Standard
02: Hi-temperature

10 Construction
A: General type
B: Shaft protective tube type
C: Shaft length adjustable type
D: Cable wire type

11 Power supply
A: AC110V D: AC24V
B: AC220V E: DC24V
C: AC240V

Connection
12 13 14 15 16 17

Flange item A8: 1" 01: PT male

AK: JIS-FF B1: 1-1/2" 03: PF male
AN: ANSI-RF B2: 2" 07: NPT male
2
AS: DIN-FF B4: 2-1/2" 39: 5 kg/cm x4T(Thin flange)
BC: Standard thin flange 40: 5 kg/cm2
2
(Suitable for 2-1/2"dimension) 42: 10 kg/cm
48: 150 Lbs
Thread item 49: 300 Lbs
AA: JIS 57: PN10
AC: ANSI 58: PN16

18 Paddle model
A:None H:Folding type 200x28(WxH)
B:100x30(WxH) K:Cable wire type only100x108(WxH)
C:65x80(WxH) N:Scimitar shaped type(PC) 98x120(WxH)
F:50x30(WxH) P:Cross bladed type(PC)80x32(WxH)
G:Scimitar type 100x131(WxH)
※N type and P type not suitable for high temperature(>120°C)

19 20 21 22 Length
Code Length range
0001~4000 0001~4000mm
※The General power socket is not shared with the warning type and explosion proof type.

8
WARNING LIGHT TYPE - SEX5

1 Power source : (A)110Vac,(B)220Vac,(C)240Vac, 1 Connection : 1"PF screw or JIS 2-1/2"H5kg/cm2

(D)24Vac, 50/60Hz (E)24Vdc 1 Upper cover protection / material : IP67 / Pc cover
1 Power consumption : 3W 1 Twrminal box protection / material : IP67 / ADC-12
1 Contact capacity : SPDT, 5A/250Vac 1 Conduit : 1/2"NPT
1 Rotary speed : 1 R.P.M. 1 Material density : 0.5 g/cm3
1 Insulation test voltage : 2500V

SCREW TYPE
SE110 Series
SE110 Series
Horizontal mounting
Operation Temperature (-20BC ~ 85BC) Split
pins
1"PF
Weight: 1.2 kg
f10

100 f98

24.7
30

1/2"NPT
L=103 109

212

SHAFT PROTECTIVE SE120 Series SE130 Series

TUBE TYPE
SE120 Series
f98 f98
Horizontal /Vertical mounting
Operation Temperature (-20BC ~ 85BC)
1/2"NPT
Weight: 1.2 kg
112
Standard Length: 134 1/2"NPT
f155
L--250mm (2.2 kg)
L--500mm (2.5 kg)
f155
L--750mm (2.8 kg) 4
P.C.D f130
Customized lengths available 4
4-f15
P.C.D f130
Split
pins
4-f15
f27.2 f9
SHAFT LENGTH
ADJUSTABLE TYPE
L=250~1000mm
SE130 Series f10 f12.7
Vertical mounting Split
pins

Operation Temperature (-20BC ~ 85BC) L=450~2000mm

Standard Length: 80
L– 460~630mm (2.5 kg) f8
L– 650~1000mm (2.8 kg)
L– 750~1200mm (3.0 kg) 65

Customized lengths available 30

100

9
WARNING LIGHT TYPE - SEX5

HI-TEMP TYPE
SE140 Series SE140 Series SE141 Series
Horizontal mounting
Temp. (-20BC ~ 200BC)
f98
Weight: 2.1 kg
P.C.D f130 1/2"NPT
f155
4-f15 109
f88
HI-TEMP TYPE
f88
PROTECTIVE TUBE TYPE
SE141 Series 100 f98 75
Horizontal /Vertical mounting f155
f10
Operation Temperature (-20BC ~ 200BC) f27.2
Standard Length (option): 30 P.C.D f130 4
L--250mm (2.6 kg)
L--500mm (2.9 kg) 4-f15
1/2"NPT f10
L--750mm (3.2 kg) 88 56 109 L=250~1000mm
Split
pins
Special length is made by order
257
80

65

HI-TEMP SHAFT
LENGTH ADJUSTABLE TYPE SE146 Series SE160 Series
SE146 Series
Vertical mounting
f98 f98
Operation Temperature (-20BC ~ 200BC)
Standard Length (option): 1/2"NPT 1/2"NPT
L– 450~630mm (3 kg)
109 120
L– 650~1000mm (3.3 kg)
L– 750~1200mm (3.5 kg)
f140
Special length is made by order f88
16
f155 4 56 f10
P.C.D f105

CABLE WIRE TYPE P.C.D f130 f10 4-f19

SE160 Series
Vertical mounting 4-f15 f6
Operation Temperature (-20BC ~ 85BC) Split
pins
f9 L=450~4000mm
Standard Length (option):
L-- 450mm (2.5 kg)
L-- 650mm (2.8 kg) L=450~2000mm
f28
L-- 750mm (3 kg) f12.7
Special length is made by order
30
f8

100
30

100

10
NEW / OLD PADDLE MODEL COMPARISON TABLE

New Figure Dimension(WxH) Old

W
B Rectangular shaped type 100x30 A
H

C 65x80 B
W
D Shovel shaped type 65x120 C
H
E 80x80 D

F Rectangular type, W 50x30 E

one sided
H

131

G Scimitar shaped type 100 100x131 F

30

H Folding type 28 200x28 J

200

f28
108
K Weights type 100x108 X
30
100

Scimitar shaped type(PC) 98

N 98x120

120

P Cross bladed type(PC) 31.4 80x32

80

11
PROBE LENGTH LIST FOR WARNING LIGHT TYPE
(WITH DIFFERENT PADDLES)

SE110 SE111 SE140

Product model
100
100 100

Paddle model 30
L=103 30 30
L=97 L=90

Rectangular
shaped type
100x30 L=103 L=96 L=90
W

Shovel shaped type 65x80 L=153 L=146 L=142

W 65x120 L=193 L=186 L=182

H 80x80 L=153 L=146 L=142

Rectangular type,
one sided

50x30 L=104 L=97 L=94

W

Scimitar
shaped type
131

100x131 L=204 L=197 L=190

100

30

Folding type
200x28 L=126 L=119 L=114
28
200

Scimitar
shaped type(PC)

98x120 L=175 L=168

98 Not suitable for high
temperature(>120°C)
120
Stainless steel paddle
Cross suggested
bladed type(PC)
80x32 L=81 L=74
31.4
80

12
ORDER INFORMATION

05 06 10 11 12 13 14 15 16 17 18 19 20 21 22
General Type SEX 5 99 0 0 - B 9999999999999

05 06 Model
00: Standard
02: Hi-temperature

10 Construction
A: General type
B: Shaft protective tube type
C: Shaft length adjustable type
D: Cable wire type

11 Power supply
A: AC110V D: AC24V
B: AC220V E: DC24V
C: AC240V

Connection
12 13 14 15 16 17

Flange item A8: 1" 01: PT male

AK: JIS-FF B1: 1-1/2" 03: PF male
AN: ANSI-RF B2: 2" 07: NPT male
2
AS: DIN-FF B4: 2-1/2" 39: 5 kg/cm x4T(Thin flange)
BC: Standard thin flange 40: 5 kg/cm2
2
(Suitable for 2-1/2"dimension) 42: 10 kg/cm
48: 150 Lbs
Thread item 49: 300 Lbs
AA: JIS 57: PN10
AC: ANSI 58: PN16

18 Paddle model
A:None H:Folding type 200x28(WxH)
B:100x30(WxH) K:Cable wire type only100x108(WxH)
C:65x80(WxH) N:Scimitar shaped type(PC) 98x120(WxH)
F:50x30(WxH) P:Cross bladed type(PC)80x32(WxH)
G:Scimitar type 100x131(WxH)
※N type and P type not suitable for high temperature(>120°C)

19 20 21 22 Length
Code Length range
0001~4000 0001~4000mm

13
EXPLOSION PROOF TYPE - SEX5 ATEX II 1D/2D Ex ta/tb IIIC T85BC or T100BC or T150BC or T200BC
IECEx Ex ta/tb IIIC T85BC or T100BC or T150BC or T200BC Da/Db

1 Power source : (A)110Vac,(B)220Vac,(C)240Vac, 1 Connection : 1"PF screw or JIS 2-1/2"H5kg/cm2

(D)24Vac, 50/60Hz (E)24Vdc 1 Protection/ material : IP67 / ADC-12
1 Power consumption : 3W 1 Conduit : 1/2"NPT/ADC-12
1 Contact capacity : SPDT, 5A/250Vac 1 Material density : 0.5 g/cm3
1 Rotary speed : 1 R.P.M.
1 Insulation test voltage : 2500V

SCREW TYPE
SE110 Series
SE110 Series
Horizontal mounting
Operation Temperature (-20BC ~ 85BC) Split
pins
1"PF
Weight: 1.2 kg
f10

100 f98

24.7
30 1/2"NPT

L=103 120

222

SHAFT PROTECTIVE SE120 Series SE130 Series

TUBE TYPE
SE120 Series f98 f98
Horizontal /Vertical mounting
Operation Temperature (-20BC ~ 85BC)
Weight: 1.2 kg 120
Standard Length: 144
1/2"NPT
L--250mm (2.2 kg) 1/2"NPT f140
L--500mm (2.5 kg) 16
L--750mm (2.8 kg)
P.C.D f105 f10
Customized lengths available
8 4-f19
1"PF
Split
pins
SHAFT LENGTH f27.2
ADJUSTABLE TYPE f9
SE130 Series
Vertical mounting L=250~1000mm
f10
Operation Temperature (-20BC ~ 85BC) f12.7
Split
pins
Standard Length:
L– 460~630mm (2.5 kg) 80
L=450~2000mm
L– 650~1000mm (2.8 kg)
L– 750~1200mm (3.0 kg)
f8
Customized lengths available 65

30

100

14
EXPLOSION PROOF TYPE - SEX5 ATEX II 1D/2D Ex ta/tb IIIC T85BC or T100BC or T150BC or T200BC
IECEx Ex ta/tb IIIC T85BC or T100BC or T150BC or T200BC Da/Db

HI-TEMP TYPE
SE140 Series
Horizontal mounting
SE140 Series SE141 Series
Temp. (-20BC ~ 200BC)
Weight: 2.1 kg f98
Split
pins f86

120
HI-TEMP TYPE 100 f98
1/2"NPT
PROTECTIVE TUBE TYPE f10 f86
SE141 Series
30
Horizontal /Vertical mounting 75
1/2"NPT
Operation Temperature (-20BC ~ 200BC) f140
92 56 120
Standard Length (option): 267
16

L--250mm (2.6 kg) P.C.D f105

L--500mm (2.9 kg)
L--750mm (3.2 kg) 4-f19
f27.2
Special length is made by order
L=250~1000mm
f10
Split
pins

80

65

SE146Series SE160 Series

HI-TEMP SHAFT
LENGTH ADJUSTABLE TYPE
f98 f98
SE146 Series
Vertical mounting
Operation Temperature (-20BC ~ 200BC) 1/2"NPT

Standard Length (option): 120 120

L– 450~630mm (3 kg) 1/2"NPT

f140
L– 650~1000mm (3.3 kg) f86
L– 750~1200mm (3.5 kg) 16
f140 56 f10
P.C.D f105
16
4-f19
CABLE WIRE TYPE P.C.D f105
SE160 Series
Vertical mounting 4-f19

Operation Temperature (-20BC ~ 85BC) Split
pins

f6 L=450~4000mm
Standard Length (option): f9

L-- 450mm (2.5 kg)

L-- 650mm (2.8 kg) f12.7 L=450~2000mm
f28
L-- 750mm (3 kg)
Special length is made by order
f8 30

100

30
100

15
MODEL NUMBER / ORDER CODE COMPARISON TABLE

New Figure Dimension(WxH) Old

W
B Rectangular shaped type 100x30 A
H

C 65x80 B
W
D Shovel shaped type 65x120 C
H
E 80x80 D

F Rectangular type, W 50x30 E

one sided
H

131

G Scimitar shaped type 100 100x131 F

30

H Folding type 28 200x28 J

200

f28
108
K Weights type 100x108 X
30
100

16
PROBE LENGTH LIST FOR EXPLOSION PROOF TYPE
(WITH DIFFERENT PADDLES)

SE110 SE140
Product model
100 100

Paddle model 30 30
L=103 L=92

Rectangular
shaped type
100x30 L=103 L=92
W

Shovel shaped type 65x80 L=153 L=142

W 65x120 L=193 L=182

H 80x80 L=153 L=142

Rectangular type,
one sided

50x30 L=104 L=93

W

Scimitar
shaped type
131

100x131 L=204 L=193

100

30

Folding type

28
200x28 L=126 L=115
200

17
ORDER INFORMATION

05 06 07 08 10 11 12 13 14 15 16 17 18 19 20 21 22

SEX 5 9999- A 9999999999999

05 06 Model
00: Standard
02: Hi-temperature

07 08 Certification
1D: ATEX-Dust
2D: IECEx-Dust

10 Construction
A: General type
B: Shaft protective tube type
C: Shaft length adjustable type
D: Cable wire type

11 Power supply
A: AC110V
B: AC220V
C: AC240V
D: AC24V
E: DC24V

Connection
12 13 14 15 16 17

Flange item A8: 1" 01: PT male

AK: JIS-FF B1: 1-1/2" 03: PF male
AN: ANSI-RF B2: 2" 07: NPT male
AS: DIN-FF B4: 2-1/2" 39: 5 kg/cm2x4T(Thin flange)
2
BC: Standard thin flange 40: 5 kg/cm
(Suitable for 2-1/2"dimension) 42: 10 kg/cm2
48: 150 Lbs
Thread item 49: 300 Lbs
AA: JIS 57: PN10
AC: ANSI 58: PN16

18 Paddle model
A:None G:Scimitar type
B:100x30(WxH) H:Folding type 200x28(WxH)
C:65x80(WxH) K:Cable wire type only 100x108(WxH)
F:50x30(WxH)

19 20 21 22 Length
Code Length range
0001~4000 0001~4000mm

18
 NEPSI Ex d IIC T3~T6 Gb
Ex tD A20/A21 IP65 T80BC / T95BC / T130BC / T190BC
ATEX II 2G Ex d IIB T3 or T4 or T5 or T6 Gb
II 2D Ex tb IIIC T200BC or T135BC or T100BC or T85BC Db
EXPLOSION PROOF TYPE IECEx Ex db IIB T3 or T4 or T5 or T6 Gb
Ex tb IIIC T200BC or T135BC or T100BC or T85BC Db

1 Power source : (A)110Vac, (B)220Vac, (C)240Vac 1 Connect : 1"PF screw or flange 1"~6"
(D)24Vac, 50/60Hz 2-1/2"H5kg/cm2 (std.)
1 Power consumption :3W 1 Housing material : AL Alloy, ADC-12
1 Contact capacity : SPDT, 3A/250Vac 1 Conduit : 1/2" (std.) or 3/4"NPT
1 Rotary speed : 1 R.P.M. 1 Material density : 0.5 g/cm3
1 Insulation test voltage : AC 1500VH1minute

EXPLOSION PROOF f113 EXPLOSION PROOF

CONNECTION TYPE SHAFT PROTECTION TYPE
SE170 series SE172 series f113
Horizontal mounting 108
Temp. (-20BC ~ 70BC) Horizontal /Vertical mounting
Temp. (-20BC ~ 70BC)
108
1"PF 20 Standard Length (option):
24
L-- 250mm
f10
L=85 Split
pins L-- 500mm 20
L-- 750mm
30
Customized lengths available 1"PF
100

f10
EXPLOSION PROOF f113
FLANGE TYPE L=250 ~ Split
pins
SE171 series 750 mm
Horizontal mounting
108
Temp. (-20BC ~ 70BC)

f155 20
14
f10
Split
pins
L= 71 4- f15
30 PCD 130

100

EXPLOSION PROOF EXPLOSION PROOF

ADJUSTABLE SHAFT TYPE HI-TEMP TYPE
SE173 series f113 SE174 series f113
Horizontal mounting
Vertical mounting Temp. (-20BC ~ 190BC)
Temp. (-20BC ~ 70BC) 108
108
Standard Length (option):
L-- 450 ~630mm f155
20 f90
L-- 650 ~1000mm
14
L– 750 ~1200mm 45 f155
PCD130 f10
Special length is made by
order PCD 130
4-f15 f9 4-f15 Split
pins
Split
pins L=88

L 30
f12.7

100

f8

30
100

19
 NEPSI Ex d IIC T3~T6 Gb
Ex tD A20/A21 IP65 T80BC / T95BC / T130BC / T190BC
ATEX II 2G Ex d IIB T3 or T4 or T5 or T6 Gb
II 2D Ex tb IIIC T200BC or T135BC or T100BC or T85BC Db
EXPLOSION PROOF TYPE IECEx Ex db IIB T3 or T4 or T5 or T6 Gb
Ex tb IIIC T200BC or T135BC or T100BC or T85BC Db

EXPLOSION PROOF EXPLOSION PROOF EXPLOSION PROOF

HI-TEMP SHAFT HI-TEMP ADJUSTABLE CABLE WIRE TYPE
PROTECTIVE TUBE TYPE SHAFT TYPE SE177 Series
SE175 Series SE176 Series
Horizontal /Vertical mounting Vertical mounting Vertical mounting
Temp. (-20BC ~ 190BC) Temp. (-20BC ~ 190BC) Temp. (-20BC ~ 70BC)
Special length is made by order Special length is made by order Special length is made by order

f113 f113

f113

108
108

f90 f90 108

45
45 f155
14 f155 20
f10 14
1"PF PCD130 Split
pins
f27.2

f9 f14
f10 4-f15
PCD 130
L=250~ f6 4-f15
750 mm L
Split
pins f12.7 L=450~
4000 mm
f28 108
f8

30
30
100 100

4 Paddle Introduction
A E
(E) 50x30 (WxH), Suitable for high
(A) 100x30 (WxH), Min. fixed hole
diameter size f90mm. S.G. raw materials. Use a
small size paddle to decrease
W W the impact of material falling
directly on paddle.
H
H
F
B,C,D (F) Scimitar model paddle, Screw
(B) 65x80 (WxH), Directly mounted 131 tightly on the 1" diameter
into 2-1/2" fixed hole. fixed hole, It Is easier to
W (C) 65x120 (WxH), Directly mounted mount and dismount.
into 2-1/2" fixed hole. 100
(D) 80x80 (WxH)
H
30

20
MODEL NUMBER / ORDER CODE COMPARISON TABLE

ACCESSORIES
Model Number Order Code Cable Conduit - Ex d IIC
SE170 Material: Washer — NBR
SEX30099-AA Body— Copper alloy(3/4"NPT)
SE171 Nickel plated(1/2"NPT)
SE172 SEX30099-AB HP415-A23100MH01(29-1104)
3/4"NPT
SE173 SEX30099-AC
SE174 SEX30299-AA
fMax=14
SE175 SEX30299-AB 32 50 fMin=10
60

SE176 SEX30299-AC HP415-A23000MG01(29-1108)

1/2"NPT
SE177 SEX30099-AD

fMax=10
27 50 fMin=6.5
60
New / Old paddle model comparison table
New Figure Dimension(WxH) Old

W
B Rectangular shaped type 100x30 A
H

C 65x80 B
W
D Shovel shaped type 65x120 C
H
E 80x80 D

F Rectangular type, one sided W 50x30 E

H

131

G Scimitar shaped type 100 100x131 F

30

H Hinged type 28 200x28 J

200

f28
108
K Weights type 100x108 X
30
100

21
ORDER INFORMATION

05 06 07 08 10 11 12 13 14 15 16 17 18 19 20 21 22

SEX3 99 99- A 9999999999999

05 06 Model
00: Standard
02: Hi-temperature

07 08 Certification
1C: ATEX-Exd
2C: IECEx-Exd
5C: TS-Exd
7C: NEPSI-Exd

10 Construction
A: General type
B: Shaft protective tube type
C: Shaft length adjustable type
D: Cable wire type

11 Power supply
A: AC110V
B: AC220V
C: AC240V
D: AC24V

Connection
12 13 14 15 16 17

Flange item A8: 1" 01: PT male

AK: JIS-FF B1: 1-1/2" 03: PF male
AN: ANSI-RF B2: 2" 07: NPT male
2
AS: DIN-FF B4: 2-1/2" 40: 5 kg/cm
2
42: 10 kg/cm
Thread item 48: 150 Lbs
AA: JIS 49: 300 Lbs
AC: ANSI 57: PN10
58: PN16

18 Paddle model
A:None F:50x30(WxH)
B:100x30(WxH) G:Scimitar type
C:65x80(WxH) K:100x108(WxH)(Cable wire type only)

19 20 21 22 Length
Code Length range
0001~4000 0001~4000mm

22
 Housing cover code:
0: Aluminum cover
MINI TYPE(ALUMINUM ALLOY COVER) 1: Aluminum cover with LED lamp

1 Power source : (A)110Vac,(B)220Vac,(C)240Vac, 1 Housing material : Aluminum alloy

(D)24Vac, 50/60Hz,(E)24Vdc 1 Ambient temperature : -40LC ~ 85LC
1 Power consumption : 1.5W 1 Cable length : 300mm (available for custom length)
1 Contact capacity : 5A/250Vac, 5A/30Vdc 1 Material density : 0.3 g/cm3
1 Rotary speed : 1R.P.M. 1 Display status : Green(Working), Red(Stopped)
1 IP rating : IP65

STANDARD TYPE HIGH TEMPERATURE TYPE

SE3890 Series SE3894 Series
Operation temperature: -40BC ~ 85BC Operation temperature: -40BC ~ 200°C
Paddle material: PC Paddle material: SUS304
177
L=78mm L=86mm
30 30 18 f88
38 LED indicator LED indicator
8
80
f79 100
f79
3/4"PF
3/4"PF
Split
pins

f8 cable 300mm f8 cable 300mm

HIGH TEMPERATURE SHAFT

SHAFT PROTECTIVE TUBE TYPE PROTECTIVE TUBE TYPE
SE3892 Series SE3895 Series
Operation temperature: -40BC ~ 85BC Operation temperature: -40BC ~ 200°C
Paddle material: SUS304 Paddle material: SUS304

L=150~400mm
L=150~400mm
30
LED indicator 30 18 LED indicator
f88

21.7
100
f79 100
21.7 3/4"PF f79
Split
pins
Split
pins
3/4"PF

f8 cable 300mm
f8 cable 300mm

23
 MINI TYPE(EXPLOSION PROOF) NEPSI DIP A20/21 T , T3~T6 IP65
A

1 Power source : (A)110Vac,(B)220Vac,(C)240Vac, 1 Housing material : Aluminum alloy

(D)24Vac, 50/60Hz,(E)24Vdc 1 Ambient temperature : -40LC ~ 85LC
1 Power consumption : 1.5W 1 Cable length : 300mm (available for custom length)
1 Contact capacity : 5A/250Vac, 5A/30Vdc 1 Material density : 0.3 g/cm3
1 Rotary speed : 1R.P.M.
1 IP rating : IP65

STANDARD TYPE HIGH TEMPERATURE TYPE

SE3700 Series SE3704 Series
Operation temperature: -40BC ~ 80BC Operation temperature: -40BC ~ 195°C
Paddle material: PC Paddle material: SUS304

177
L=78mm
30 L=86mm
30 18 f88
38

80 8
f79
100
f79
3/4"PF
3/4"PF
Split
pins
1/2"NPT
1/2"NPT

f8 cable 300mm
f8 cable 300mm

HIGH TEMPERATURE SHAFT

SHAFT PROTECTIVE TUBE TYPE PROTECTIVE TUBE TYPE
SE3702 Series SE3705 Series
Operation temperature: -40BC ~ 80BC Operation temperature: -40BC ~ 195°C
Paddle material: SUS304 Paddle material: SUS304

L=150~400mm
L=150~400mm
30
30 18
f88

21.7
100
f79 100
21.7 3/4"PF f79
Split
pins
Split
pins
1/2"NPT 3/4"PF
1/2"NPT

f8 cable 300mm
f8 cable 300mm

24
 MINI TYPE(PLASTIC COVER)

1 Power source : (A)110Vac,(B)220Vac,(C)240Vac, 1 Housing material : Plastic cover

(D)24Vac, 50/60Hz,(E)24Vdc 1 Ambient temperature : -40LC ~ 85LC
1 Power consumption : 1.5W 1 Cable length : 300mm (available for custom length)
1 Contact capacity : 5A/250Vac, 5A/30Vdc 1 Material density : 0.3 g/cm3
1 Rotary speed : 1R.P.M.
1 IP rating : IP65

STANDARD TYPE HIGH TEMPERATURE TYPE

SE3820 Series SE3824 Series
Operation temperature: -40BC ~ 85BC Operation temperature: -40BC ~ 200BC
Paddle material: PC Paddle material: SUS304
177
L=78mm L=86mm
30 30 18 f88
38
8
80
f79 100
f79
3/4"PF

3/4"PF
Split
pins

f8 cable 300mm f8 cable 300mm

HIGH TEMPERATURE SHAFT

SHAFT PROTECTIVE TUBE TYPE PROTECTIVE TUBE TYPE
SE3822 Series SE3825 Series
Operation temperature: -40BC ~ 85BC Operation temperature: -40BC ~ 200BC
Paddle material: SUS304 Paddle material: SUS304

L=150~400mm
L=150~400mm
30
30 18
f88

21.7
100
f79 100
21.7 3/4"PF f79
Split
pins
Split
pins
3/4"PF

f8 cable 300mm
f8 cable 300mm

25
PROBE LENGTH LIST FOR MINI TYPE
(WITH DIFFERENT PADDLES)

80 98 W
Appearance diagram 20
80
120
30 H

Cross Scimitar 鐮⼑型葉片

Rectangular
Hinged type
Paddle model bladed type shaped type shaped type
132x100 80x20 (SUS)
80x30 (PC) 98x120 (PC) 100x30 (SUS)
SE3890 L=78mm
30

80
L=78 L=174 L=104 L=100

SE3894
L=86mm
30
Not suitable for high
100 temperature (＞120BC) L=86 L=82
Stainless steel paddle suggested

SE290

L=87
30

L=87 L=183 L=113 L=109

27
MODEL NUMBER / ORDER CODE COMPARISON TABLE

Model Number Order Code Model Number Order Code

SE3700 SEX2007D-AA SE3812 SEX20000-BB
SE3702 SEX2007D-AB SE3822 SEX20000-CB
SE3704 SEX2027D-AA SE3804 SEX20200-AA
SE3705 SEX2027D-AB SE3814 SEX20200-BA
SE3800 SEX20000-AA SE3824 SEX20200-CA
SE3810 SEX20000-BA SE3805 SEX20200-AB
SE3820 SEX20000-CA SE3815 SEX20200-BB
SE3802 SEX20000-AB SE3825 SEX20200-CB

New / Old paddle model comparison table

New Figure Dimension(WxH) Old

80
G Cross bladed type 80x30 G

30

98
H Scimitar shaped type 98x120 H
120

W
I Rectangular shaped type 100x30 I

K Hinged type 20 80x20 K

80

26
ORDER INFORMATION

05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

SEX2 99 99- 99999999999999 9999

05 06 Model
00: Standard
02: Hi-temperature

07 08 Certification
00: None
7D: NEPSI-Exd
(The housing select A:Alumium cover only)

09 Housing (Next page)

A: Aluminum cover
B: Aluminum cover with LED lamp
C: Plastic cover

10 Construction
A: General type
B: Shaft protective tube type

11 Power supply
A: AC110V
B: AC220V
C: AC240V
D: AC24V
E: DC24V

Connection
12 13 14 15 16 17

Flange item A7: 3/4" 01: PT male

AK: JIS-FF A8: 1" 03: PF male
AN: ANSI-RF B1: 1-1/2" 07: NPT male
AS: DIN-FF B2: 2" 40: 5 kg/cm2
2
42: 10 kg/cm
Thread item 48: 150 Lbs
AA: JIS 49: 300 Lbs
AC: ANSI 57: PN10
58: PN16

28
ORDER INFORMATION

05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

SEX2 99 99- 99999999999999 9999

18 Paddle model
A:None
G:PC; Cross type
H:PC; Scimitar type 120x98(WxH)
I :SUS; 100x30(WxH)
K:SUS; Folding type 80x20(WxH)

19 20 21 22 Length
Code Length range
0001~400 0001~400mm

23 24 25 26 Cable wire length

Code Length range
0300~5000 0300~5000mm

29
MINI TYPE(ECONOMY)

1 Power source : (A)110Vac,(B)220Vac, 1 Housing material : Plastic cover

(D)24Vac, 50/60Hz; (E)24Vdc 1 Ambient temperature : -20LC ~ 80LC
1 Power consumption : 1.5W 1 Cable length : 300mm (available for custom length)
1 Contact capacity : 3A/250Vac, 3A/30Vdc 1 Material density : 0.3 g/cm3
1 Rotary speed : 1R.P.M.
1 IP rating : IP65

STANDARD
SE290 A/B/D/E
Operation temperature: -20BC ~ 80BC
Paddle material: PC

179
L=87
30 41

f70

3/4"PF

0.5mm²X6C Cable wire length>300mm

MODEL NUMBER / ORDER CODE COMPARISON TABLE

Model Number Order Code

SE290A SEX40000-CAA
SE290B SEX40000-CAB
SE290D SEX40000-CAD
SE290E SEX40000-CAE

30
ORDER INFORMATION

11 12 13 14 15 16 17 18 19 20 21 22

SEX4 0 0 0 0 - C A 999999999999

11 Power supply
A: AC110V
B: AC220V
D: AC24V
E: DC24V

Connection
12 13 14 15 16 17

Flange item A7: 3/4" 01: PT male

AK: JIS-FF A8: 1" 03: PF male
AN: ANSI-RF B1: 1-1/2" 07: NPT male
2
AS: DIN-FF B2: 2" 40: 5 kg/cm
42: 10 kg/cm2
Thread item 48: 150 Lbs
AA: JIS 49: 300 Lbs
AC: ANSI 57: PN10
58: PN16

18 Paddle model
A:None
G:PC; Cross type
H:PC; Scimitar type 120x98(WxH)
I :SUS; 100x30(WxH)
K:SUS; Folding type 80x20(WxH)

19 20 21 22 Cable wire length

Code Length range
0300~5000 0300~5000mm

31
MOUNTING EXAMPLES

Regular models such as the SE11should be

installed directly on the tank side.
Mount at a 35° angle the blade through the tank
opening or hole sliding the blade in first.

* The SE170 series minimum hole size should be

95mm in diameter.
The scimitar model is directly installed on the tank 105
wall method as shown below.
(Assuming an arc-shaped tank with a 3/4 100
"connection) and then screwing it tight. Min.90

Min.3/4"PF
30

Max.45
Max.15mm

INJECTION MOLDING MACHINES

Injection Molding Machine usually require the SE38.
Install the Rotary Paddle through a 20mm diameter
hole on the tank/silo.
Remove the paddle from the device by taking out the
fastening pin.
Insert the SE38 through the mounting hole and
tighten it.
After which, secure the Paddle to the SE38 by
locking it to the shaft with the pin.
Keep in mind to 'widen' the opening of the pin in
order to secure it.

32
EXAMPLES

SE130
SE141

SE110
SE120
15B

SE111

INSTALLATION NOTICES
1. Side mount the sensor at a downward angle of 15° ~20° to decrease the material inflow impact.
2. For high temperature application (more than 70°C), please use the SE149 Series.
3. For SE110~SE140 using a 1" inlet, please apply the scimitar model and screw directly.
4. For SE130, SE146 series have flexible and extendible shafts.
5. Please ensure the lead wire enters the housing from the bottom and the nuts are fastened to secure the device.

33
 Global Network
Germany
China

Taiwan U.S.

Singapore

Indonesia

Head Quarte North America Europe

Taiwan California, U.S. Germany
FineTek Co., Ltd. - Taipei Head Quarter Aplus Finetek Sensor Inc. - US Office FineTek GmbH - Germany Office
No.16, Tzuchiang St., Tucheng Industrial Park 355 S. Lemon Ave, Suite D, Walnut, Bei den Kämpen 26
New Taipei City 236, Taiwan CA 91789 21220 Seevetal-Ramelsloh, Germany
TEL: 886-2-2269-6789 TEL: 1 909 598 2488 TEL: +49-(0)4185-8083-12
FAX: 886-2-2268-6682 FAX: 1 909 598 3188 FAX: +49-(0)4185-8083-80
EMAIL: [email protected] EMAIL: [email protected] EMAIL: [email protected]

Asia Mütec Instruments GmbH - Germany Office

China Bei den Kämpen 26
21220 Seevetal-Ramelsloh, Germany
Fine automation Co., Ltd. - Shanghai Factory
TEL: +49-(0)4185-8083-0
No.451 DuHui Rd, MinHang District, Shanghai,
FAX: +49-(0)4185-8083-80
China 201109
EMAIL: [email protected]
TEL: 86-21-6490-7260
EMAIL: [email protected]

Singapore
FineTek Pte Ltd. - Singapore Office
37 Kaki Bukit Place, Level 4 Singapore 416215
TEL: 65-6452-6340
EMAIL: [email protected]

Indonesia
PT. FineTek Automation Indonesia - Indonesia Office
PERGUDANGAN TUNAS BITUNG
JL. Raya Serang KM. 13,8, Blok C3 No. 12&15, Bitung Cikupa, Distributor:
Tangerang 15710
TEL: 62 (021)-2958-1688
EMAIL: [email protected]

08-SEXEP-022224