Public

#_x000D_

S.NO

1a.

1b.

1c.

1d.
1e.
1f.
1g.
1h.
1i.
1j.

2a
2a.1
2a.2
2a.3
2a.5
2a.6
2a.7
2b
2b.1
2b.2
2b.3
2b.5
2b.6
TOTAL -
C

_x000D_ Public #
Public #_x000D_

3a

3b

3c

3d

3e

3f

3g

3h

3i

3j

_x000D_ Public #
Public
#_x000D_

5a
5b
5c
5d
5e
5f
5g
5h
5i
5j
5k
5l
5m
5n
5o

5p

6a
6b

7a
7b
7c
7d
7e
7f
7g

_x000D_ Public #
Public #_x000D_

7h
7i
7j
7k
7l
7m
7n
7o

7p

9a
9b

10

11

12

12a
12b
12c

13

13a

_x000D_ Public #
Public
#_x000D_

K
22

22a

22b

22c
M

24

24a

25

25a

26

27

28

29

30

30a

30b
31

32

33

_x000D_ Public #
Public
#_x000D_

DESCRIPTION

MAIN LT PANELS
Installation, testing and commissioning of New PCC, and Sub Panels as per drawing and specifications. Panel should be dust a
52). Panel shall be fabricated from 14 /16 SWG CRCA sheet metal duly painted with seven tank process and poweder coated
Panel consisting of following......(All LT panels shall be supplied by the Client)

PCC (POWER CONTROL CENTRE)

400 KVAR HYBRID APFC PANEL
(150 kVAR CAP. BANK + 2 x 125 kVAR SVG Plus with Harmonics Mitigation)
200 KVAR HYBRID APFC PANEL
(75 kVAR CAP. BANK + 1 x 125 kVAR SVG Plus with Harmonics Mitigation)
SUB POWER PANEL - 1
SUB POWER PANEL - 2
SUB POWER PANEL - 3 + 100 kVAR APFC Section
SUB POWER PANEL - 4
SUB POWER PANEL - 5 + 100 kVAR APFC Section
COMPRESSOR POWER PANEL
"W" TYPE RECEPTACLE BOARD
TOTAL A-MAIN AN
BUSBAR TRUNKING
Installation, testing and commissioning of totally enclosed compact following Sandwich type busbar trunking system with followi
legnth with all accessories such as couplers, joints, end plates, end feed direct type unit suitable to terminate the reccomended
horizontal supports, expansion joints etc. The BBT suitable for drawing power to various DBs / Machines / receptacle boards, th
or plug-in boxes. The bus bar trunking shall have expansion joints, as / if required. The BBT supplier shall provide the detailed s
proper erection of bus bar trunking system with manufacturers guideline / erection shop drawings etc. complete to the satisfacti
bar trunking (BBT) shall be of following rated complete (Refer to only the final approved drawings) (BBT shall be supplied by th

1000 A, 380 / 400V, 50 kA, 3P+100% N+PE (5P), Aluminum Sandwich Busbar Trunking
Straight Length
End Feed Unit Direct (Suitable for Cable Size: 4RUNS OF 4C x 240 SQ.MM. Alu. A2XFY Cables)
Flat wise Horizontal support
End Cover
Expansion Unit (Facilitates to absorb the thermal expansion and to avoid unwanted stresses on joints)
Edge Elbow
400 A, 380 / 400V, 50 kA, 3P+100% N+PE (5P), Aluminum Sandwich Busbar Trunking
Straight Length
End Feed Unit Direct (Suitable for Cable Size: 2RUNS OF 4C x 120 SQ.MM. Alu. A2XFY Cables)
Flat wise Horizontal support
End Cover
Expansion Joint (Facilitates to absorb the thermal expansion and to avoid unwanted stresses on joints)
TOTAL - B - BUSBA
LIGHTING & POWER DISTRIBUTION BOARDS

_x000D_ Public #
Public
#_x000D_

Supply, installing, testing and commissioning of metallic double door type distribution board with following MCBs / ELMCBs / R
necessary connections, remaining blank area shall be covered with blanking (dummy) plates etc. complete. (All DBs shall be in
Non-Plant Bldg. and Surface mounted in Plant Bldgs.) w.r.t. Technical specification.

4-WAY VTPN DB : (INV. O/P DB)

Incoming : 63 A FP MCB-10kA
Outgoing : 16 A TP MCB-10kA (1 nos)
Outgoing : 25 A TP MCB-10kA (1 nos)
Outgoing : 25 A SP MCB-10kA (5 nos)
Outgoing : 32 A SP MCB-10kA (1 nos)
6-WAY TPN PPI DB : (LCDB-1, LCDB-2, LCDB-3, LCDB-4, LCDB-5, LCDB-6, LCDB-7, LCDB-8, LCDB-11, LCDB-12, LCDB

Incoming : 32 A FP MCB-10kA
Sub Incoming : 25 A DP RCCB - 30 mA (3 nos)
Outgoing : 10 A SP MCB-10kA (12 nos)
8-WAY TPN PPI DB : (LCDB-9, LCDB-10)
Incoming : 32 A FP MCB-10kA
Sub Incoming : 25 A DP RCCB - 30 mA (3 nos)
Outgoing : 10 A SP MCB-10kA (18 nos)
12-WAY SPN DB : (ELDB1, ELDB3)
Incoming : 25 A DP RCBO-30mA
Outgoing : 10 A SP MCB-10kA (8 nos)
12-WAY SPN DB : (ELDB2)
Incoming : 32 A DP RCBO-30mA
Outgoing : 10 A SP MCB-10kA (8 nos)
6-WAY VTPN DB : Suitable for Incommer FP MCCB and TP MCBs as outgoings (SLDB-1, SLDB-2)
Incoming : 63 A FP MCCB - 25KA, T/M
Outgoing : 25 A TP MCB-10kA (1 nos.)
Outgoing : 32 A TP MCB-10kA (5 nos.)
12-WAY VTPN DB : Suitable for Incommer FP MCCB and TP MCBs as outgoings (SLDB-3)
Incoming : 125 A FP MCCB - 25KA, T/M
Outgoing : 25 A TP MCB-10kA (1 nos.)
Outgoing : 32 A TP MCB-10kA (5 nos.)
Outgoing : 40 A TP MCB-10kA (1 nos.)
Outgoing : 63 A TP MCB-10kA (3 nos.)
8-WAY VTPN DB : Suitable for Incommer FP MCCB and TP MCBs as outgoings (PDB-9)
Incoming : 125 A FP MCCB - 25KA, T/M
Outgoing : 16 A TP MCB-10kA (8 nos.)
6-WAY VTPN DB : Suitable for Incommer FP MCCB and TP MCBs as outgoings (PDB-1, PDB-2, PDB-3, PDB-4, PDB-5, PDB

Incoming : 125 A FP MCCB - 25KA, T/M

Outgoing : 16 A SP MCB-10kA (3 nos.)
Outgoing : 16 A TP MCB-10kA (5 nos.)
6-WAY VTPN DB : Suitable for Incommer FP MCCB and TP MCBs as outgoings (PDB-7, PDB-8)
Incoming : 125 A FP MCCB - 25KA, T/M
Outgoing : 16 A SP MCB-10kA (3 nos.)

_x000D_ Public #
Public
#_x000D_

Outgoing : 16 A TP MCB-10kA (3 nos.)

TOTAL - C - LIGHTING & POWER DISTRIBUTION BOARDS
LT CABLES
Laying, installation, testing and commissioning of armoured XLPE insulated FRLS type aluminium / copper conductor of the fo
existing cable trench / pull - through pipes / on cable tray including cleated on wall / RCC beam / slab / column / structural steel
patti spacers and GI saddles with necessary drilling and welding on structural steel etc complete with supply and fixing alluminiu
complete to the satisfaction of EIC. (Verify the actual length on site as per the cable schedule) (LT Cables shall be suppli

3.5C x 400 sq.mm Alu. A2XFY cable

3.5C x 300 sq.mm Alu. A2XFY cable
3.5C x 240 sq.mm Alu. A2XFY cable
4C x 240 sq.mm Alu. A2XFY cable
4C x 120 sq.mm Alu. A2XFY cable
3.5C x 70 sq.mm Cu. 2XFY cable
3.5C x 50 sq.mm Cu. 2XFY cable
3.5C x 35 sq.mm Cu. 2XFY cable
3.5C x 25 sq.mm Cu. 2XFY cable
4C x 16 sq.mm Cu. 2XFY cable
4C x 10 sq.mm Cu. 2XFY cable
4C x 6.0 sq.mm Cu. 2XWY cable
4C x 4.0 sq.mm Cu. 2XWY cable
3C x 4.0 sq.mm Cu. 2XWY cable
4C x 2.5 sq.mm Cu. 2XWY cable
3C x 1.5 sq.mm Cu. PVC sheathed PVC insulated flexible cable from Juction box to each lighting fixtures including all necessar
complete to the satisfaction of EIC.
Laying, installation, testing and commissioning of armoured XLPE insulated FRLS type copper conductor of the following sizes
trench / pull - through pipes / on cable tray including cleated on wall / RCC beam / slab / column / structural steel with GI heavy
and GI saddles with necessary drilling and welding on structural steel etc complete with supply and fixing alluminium tag numbe
the satisfaction of EIC. (LT Cables shall be supplied by the Client)

4C x 2.5 sq.mm Cu. 2XWY cable (For Lighting cables from LCDB to fixtures and fixture to fixture)
3C x 2.5 sq.mm Cu. 2XWY cable (For Lighting cables from LCDB to fixtures and fixture to fixture)
TOTAL - E - LT CABLES
END TERMINATIONS
End termination of following XLPE insulated armoured cables including supply and fixing of brass heavy duty double compres
glands with PVC hoods and crimping type long barrel heavy duty copper / alluminum lugs (as per conductor of cable) suitable f
armoured cables, including making connection / terminations of all leads of cables, including drilling and tapping of equipment
required and including all labour and materials complete to the satisfaction of EIC.

3.5C x 400 sq.mm Alu. A2XFY cable

3.5C x 300 sq.mm Alu. A2XFY cable
3.5C x 240 sq.mm Alu. A2XFY cable
4C x 240 sq.mm Alu. A2XFY cable
4C x 120 sq.mm Alu. A2XFY cable
3.5C x 70 sq.mm Cu. 2XFY cable
3.5C x 50 sq.mm Cu. 2XFY cable

_x000D_ Public #
Public#_x000D_

3.5C x 35 sq.mm Cu. 2XFY cable

3.5C x 25 sq.mm Cu. 2XFY cable
4C x 16 sq.mm Cu. 2XFY cable
4C x 10 sq.mm Cu. 2XFY cable
4C x 6.0 sq.mm Cu. 2XWY cable
4C x 4.0 sq.mm Cu. 2XWY cable
3C x 4.0 sq.mm Cu. 2XWY cable
4C x 2.5 sq.mm Cu. 2XWY cable
PVC Heavy duty PG gland suitable for 3C x 1.5 sq.mm Cu. PVC sheathed PVC insulated flexible cable from Juction box to eac
including all necessary termination complete to the satisfaction of EIC
TOTAL - F - END TERMINATIONS
JUNCTION BOXES
Supply and installation of 100 mm x 100 mm x 60 mm junction box as per drawing. Junction box duly fabricated from 16 SWG
with top cover of 16 SWG hot deep GI cover plate, neo-prene gasket inside, all required hardwares, necessary knock-out all sid
4.0 / 3 x 2.5 sq.mm Cu. YWY / 2XWY cables glanding complete with 15 A terminals inside the junction complete to be installed
structure with necessary drilling / welding etc. complete to the satisfaction of EIC.

TOTAL- G - JUNCTION BOXES

CABLE TRAY AND STRUCTURAL STEEL
Supply, erection, fabrication and jointing of following size GI hot dip galvanized cable tray with all accessories such as bends /
Tee, with covers or without covers and clamps, GI hardwares, other accessories etc. as per drawing and specification complete
complete to the satisfaction of EIC (Galvanisation thickness shall not been less than 75 micron)

50 x 25 x 2.0 mm Perforated cable tray with 60 x 10 x 1.6 mm Cover.

150 x 50 x 2.0 mm Perforated cable tray with 160 x 10 x 1.6 mm cover.
Supply, erection, fabrication, cutting, welding and installation of structural steel using m.s. angles, flats, channels etc. as per dr
specification with one coat of red-oxide paints and two coats of approved enamel paints with all hardwares such as anchor fast
washers etc. complete to the satisfaction of EIC.

TOTAL - H - CABLE TRAY & STRUCTURAL STEEL

EARTHING SYSTEM :
Providing and making Maintenance Free Type Earthing Pit using 3000mm long, 48mm dia. Outer Pipe Electrode and 32 x 6
Electrode. Class : B thickness, Hot deep GI (70 – 100 Micron) electrode, duly filled with high conductive and anti-corrosive crys
mixture, including excavation and making Bore of minimum size 250 mm dia. with backfilling of all necessary specially chemica
duly mix with soil (Approx. 100 kgs) and making masonry chamber / precast chamber size: 450 mm (L) x 450 mm (W) x 450 mm
complete as per ISI 3043-1987 / IEC / Local norms.. (Result required Min. 1.0-Ohm)

Supply and laying of following Hot deep G.I. Earth strip or copper earth strip for earthing with all required jointing / cutting / wel
hardwares and all welded joints to be painted with black bitumin paints and to be wraped with jute complete to the satisfaction o

75 x 10 mm GI earthing strip Buried Under ground

40 x 6 mm GI earthing strip Buried in floor above Reinforcement
40 x 6 mm GI earthing strip to be laid on cable tray
Supply, laying, installing and commissioning of following size PVC insulated PVC sheathed single core alumunium conductor u
including end terminations with aluminum crimping type lugs as per the requiements with each piece of cable etc. complete for
clamped with saddles spacers etc. complete

16 sq.mm

_x000D_ Public #
Public
#_x000D_

TOTAL - I - EARTHING SYSTEM :

LIGHTING FIXTURES
Installation, testing and commissioning of following Light fixtures etc. Including supply and installation of flexible cords, bal
hardwares etc. Excluding supply and fabrication of structural steel supports for industrial fixtures in plant bldgs. but inclusive
with all necessary structural steel supports and to be welded or nut-bolting with all necessary fabrication and drilling etc.comple
supports shall measure and paid extra as per the item in this tender) - (All Lighting Fixtures shall be Supplied by the C

60 W, 10000 Lumens LED High Bay fixture complete with all assembly, driver, clamps, "J" hook, bolt etc complete (PHILIP
LED100S WB PSU GR, Luminous Efficacy = 180lm/W)
80 W, 15000 Lumens LED High Bay fixture complete with all assembly, driver, clamps, "J" hook, bolt etc complete (PHILIP
LED150S WB PSU GR, Luminous Efficacy = 180lm/W)
Wall mounted Outdoor Flood LED light fixture with necessary assembly, drivers, diffusers etc complete.
INVERTER (For Emergency Lightings in Plant) : -
Supply, installation, testing and commissioning of following KVA Inverter / UPS with 30 minutes back-up with SMF batteries fo
lightings as per specifications given etc. complete to the satisfaction of EIC. (Note : Inverter / UPS to be suitable On-Line type)

15 KVA, Single phase I/P & O/P

TOTAL - M - INVERTER
RCC HUME / PVC PIPES
Providing and laying of following mm dia. RCC hume pipe NP2 class with color joints duly burried under ground for cable entrie
the drawings and specification complete to the satisfaction of E.I.C. (Qty. to be re-confirmed before ordering / procurement.

200 mm dia
TOTAL - N - 'RCC HUME / PVC PIPES
EXCAVATION AND BACKFILLING :
Excavation and backfilling of cable trench 900 mm deep complete with compacting surplus soil and making a good finish leve
satisfaction of E.IC.
Supply and spreading of fine river sand in existing cable trench minimum 300 mm badding etc. complete to the satisfaction of E

Supply and laying of Bricks on the cables in existing cable trench for cable protection complete to the satisfaction of E.I.C.

TOTAL - O - EXCAVATION AND BACKFILLING

SUB STATION FIRST AID ACCESSORIES
Providing and erecting printed instruction chart both in English / Local language and duly framed with front glasses, for treatme
suffering from Electric Shock
Supply and erecting of the following
2.0 mm thick rubber mat as per IS 15652:2006 / IEC / Local norms for L.T. of required length and breadth (Size 2 Mts x 1 Mtr)

One pair of HT Gloves suitable for 11 KV.

Supply and erecting first aid box with all the standard contents
Supply and erecting of GI bucket round bottom duly painted, 13 liters capacity and filled with dry-sand and kept on stand provid
hook
Supply and erecting of wall hook 25 cms projection for keeping fire buckets made out of 15 mm dia. M.S. rod grouted in wall to
15 cms.
TOTAL - P - SUB STATION FIRST AID ACCESSORIES

_x000D_ Public #
Public
#_x000D_

APEX NATIONAL INDUSTRIAL CALIBRATION CO. (AIC)

SUPPLY INSTALLATION
Units TOTAL QTY
UNIT RATE TOTAL RATE UNIT RATE TOTAL RATE

nos. 1
nos. 2

nos. 1
nos. 1
nos. 2
nos. 1
nos. 1
nos. 1
nos. 1
nos. 3
nos.

0
Mts 463
nos. 3
nos. 310
nos. 3
nos. 9
nos. 2
0
Mts 403.2
nos. 6
nos. 272
nos. 6
nos. 2
0

_x000D_ Public #
Public
#_x000D_

nos. 1

nos. 11

nos. 2

nos. 2

nos. 1

nos. 2

nos. 1

nos. 1

nos. 6

_x000D_ Public #
Public
#_x000D_

nos. 2

mts 1850
mts 1545
mts 250
mts 460
mts 200
mts 1115
mts 550
mts 1450
mts 350
mts 839
mts 2621
mts 515
mts 2000
mts 140
mts 185
mts 2950

mts 3350
mts 5425
0

nos 42
nos 22
nos 2
nos 20
nos 24
nos 22
nos 38

_x000D_ Public #
Public
#_x000D_

nos 164
nos 10
nos 22
nos 228
nos 18
nos 66
nos 4
nos 14
nos 1088

nos. 544

mts 1000
mts 745

kgs 13550

nos 34

mts 600
mts 1000
mts 1980

mts. 1445

_x000D_ Public #
Public
#_x000D_

nos 229

nos 227
nos. 88

no. 1
0

mts 50
0

Cu.M 108

Cu.M 36

nos 5000
0

nos. 1

sq.mt 30
set 1
nos 1
nos 1

nos 1
0
GRAND TOTAL

_x000D_ Public #
 Public
#_x000D_

BRATION CO. (AIC)

Total Amount

_x000D_ Public #
Public
#_x000D_

_x000D_ Public #
Public
#_x000D_

_x000D_ Public #
Public
#_x000D_

_x000D_ Public #
Public
#_x000D_

_x000D_ Public #