B/O CUT TO
REVISIONS ITEM NO. DESCRIPTION LENGTH SIZE MATERIAL ANGLE1 ANGLE2 Angle Direction MASS QTY. CERTIFICATE/BATCH NO. HEAT NO.
REV. DESCRIPTION DATE APPROVED
1 UC203x203x46 3700 S355 JO 0° 0° - 169.8 2
A FIRST ISSUE 27/06/2024 DS
2 RSA50x50x5 200 S275 JR 0° 0° - 0.7 1
3 RHS80x80x4 300 S355 J2H 0° 0° - 2.7 1
B SPLIT MOVED 17/07/2024 DS WO No: WO-000172 DATE: 18/07/2024
4 RHS60x60x4 188 S355 J2H 0° 0° - 1.3 1
C MOVED BOTTOM BEAM UPWARDS 18/07/2024 CR SALES ORDER No: SO-020112
5 RHS60x60x4 250 S355 J2H 0° 0° - 1.7 1
D MOVED SPLIT 18/07/2024 CR 6 RHS150x150x5 1400 S355 J2H 45° 45° Opposite 27.6 1 QUANTITY: 1
7 UC203x203x46 2346 S355 JO 0° - - 104.2 1 MATERIAL: SEE BOM
8 UC203x203x46 494 S355 JO - 0° - 19.2 1 FINISH: GALVANISED TO 85 MICRONS
7
2 9 4mm END CAP S235 JR 0.2 2 WEIGHT: 497.5
5
10 4mm END CAP S235 JR 0.1 1 WELD PROCEDURE SPECIFICATIONS:
10 WPQR Reference Number: WPS Reference Number:
4
3 NOTE! FRAME TO BE SPLIT INTO 2 PARTS FOR
9 TRANSPORTATION AND GALVANISING. THESE NOTES:
1 WOULD THEN BE WELDED ON SITE (BY OTHERS)
6
ALL BOX SECTION END CAPS TO HAVE Ø20 WELDING CONSUMABLES REFERENCE WELDING UNIT No
HOLES IN TWO OPPOSITE CORNER
FABRICATED BY: DATE
STAGGERED SPLIT HERE
FABRICATION, WELDING AND DIMENSIONAL INSPECTION RECORD
8 Checklist for quality of the fabricated item on the drawing. Please tick once approved
TICK
FABRICATION & WELD INSPECTION VISUAL 100%
As per provided guidelines ref: FAB001, Issue 1, January 2024
3700 203.2
DIMENSIONAL INSPECTION
As per provided guidelines ref: FAB001, Issue 1, January 2024
NON DESTRUCTIVE TESTING
Ø20 HOLES IN 4 INTERNAL
CORNERS OF UCs 300 FINAL APPROVAL AFTER INSPECTION
896
R.W.C Approval Date Additional Comment
1860
188
A
DO NOT SCALE - IF IN DOUBT ASK C
This drawing remains the intellectual property of Flintshire
Fabrications and cannot be transmitted either electronically or by hard
2196
copy to any third party without express permission.
TOLERANCES AS SPECIFIED BELOW UNLESS OTHERWISE STATED
617
Machining:- Fabrications:-
203.2
250
2690
Up to 6mm ±0.1 mm Up to 6mm ±0.5mm
Over 6 to 30mm ±0.2 Over 6 to 30mm ±1
Over 30 to 120mm ±0.3 Over 30 to 120mm ±1.5
Over 120 to 315mm ±0.5 Over 120 to 1000mm ±2
Over 315 to 1000mm ±0.8 Over 1000mm ±3
Over 1000mm ±1.2
1550
103 200 (Laser Parts ±0.2 mm)
1346.8
NB: Remove all sharp edges and burrs.
3700
CLIENT: Plumbsa Plumbing
150
THIS SECTION TO BE MARKED
43
"0317-1" AT THIS LOCATION
PART NO:
976 14
FLI-000637-P0317
TITLE:
S-35-0317 Supports
STAGGERED SPLIT HERE DRAWN: D.S. 18/07/2024
DETAIL A 14
SCALE 1 : 14 00
THIS SECTION TO BE MARKED SCALE: DNS
THIRD ANGLE
"0317-2" AT THIS LOCATION PROJECTION
DRAWING NO: FLI-000637-P0317
SHEET: 1 OF 1 REVISION: D
