WWW.SPRAYVAN.
COM
MATERIAL SAFETY DATA SHEET
Product number 823#
1. Product and Company Identification
Product name: Fusing Machine Belt Cleaner
Effective date: 21-Jan-2022
Company information Jiangsu Sprayvan Commodity Technology Development Co.,Ltd.
Company phone 0086-025-8475 7136
Version # 03
Supersedes date 10-May-2015
2. Hazards Identification
Emergency overview CONTENTS UNDER PRESSURE. Aerosol. Cancer hazard.
Irritating to eyes. Irritating to respiratory system. Prolonged
exposure may cause chronic effects.
Potential health effects
Routes of exposure Skin contact. Ingestion. Inhalation.
Eyes Causes eye irritation.
Skin Irritating to skin. Prolonged or repeated contact can result indefatting
and drying of the skin which may result in skin irritation and
dermatitis (rash).
Inhalation Intentional misuse by concentrating and inhaling the product can be
harmful or fatal.Prolonged inhalation may be harmful.
Ingestion Exposure by ingestion of an aerosol is unlikely. May cause delayed
lung damage. Components of the product may be absorbed into the
body by ingestion.
Trade name MSDS SV
Product #: 0823# Fusing MachineBelt Cleaner
1/8
WWW.SPRAYVAN.COM
Chronic effects Liver injury may occur. May cause central nervous system disorder
(e.g., narcosis involving a loss of coordination, weakness, fatigue,
mental confusion, and blurred vision) and/or damage. May cause
delayed lung damage.Prolonged
3. Composition / Information on Ingredients
Components CAS # Percent
Trichloroethylene 79-01-6 55
Propane 74-98-6 10
Dimethyl Ether 115-10-6 20
Silicone oil 63148-53-8 15
4. First Aid Measures
First aid procedures
Eye contact Immediately flush eyes with plenty of water for at least 15 minutes.
Remove contact lenses, if present and easy to do. Get medical
attention if irritation develops or persists.
Skin contact Remove and isolatel contaminated clothing and shoes. Wash off
with warm water and soap. Get medical attention if irritation
develops or persists. For minor skin contact, avoid spreading
material on unaffected skin.
Inhalation Move to fresh air. Oxygen or artificial respiration if meeded. Do not
use mouth-to-mouth method if victim inhaled the substance. Induce
artificial respiration with the aid of a pocket mask equipped with a
one-way valve or other proper respiratory medical device.Call a
physician if symptoms develop or persist.
Ingestion Move to fresh air. Oxygen or artificial respiration if needed.
Do not use mouth-to-mouth method if victim ingested the substance.
Induce artificial respiration with the aid of a pocket mask equipped
with a one-way valve or other proper respiratory medical device.
Call a physician if symptoms develop or persist.
5. Fire Fighting Measures
Trade name MSDS SV
Product #: 0823# Fusing MachineBelt Cleaner
2/8
WWW.SPRAYVAN.COM
Flammable properties Vapor or gas may spread to distant ignition sources and flash back.
Run off to sewer may cause fire or explosion hazard.
Extinguishing media
Suitable extinguishing media
Water, Water spray, Water fog, Dry chemical. Carbon dioxide (CO2).
Protection of firefighters
Specific hazards arising from the chemical
Fire may produce irritating, corrosive and/or toxic gases.
Protective equipment and precautions for firefighters
In the event of fire and/or explosion do not breathe fumes. Wear full
protective clothing,including helmet, self-contained positive
pressure or pressure demand breathing apparatus, protective
clothing and face mask. Containers should be cooled with water to
prevent vapor pressure build up. For massive fire, use unmanned
hose holders or monitor nozzles; if this is impossible, withdraw from
area and let fire burn. Cool containers with flooding quantities of
water until well after fire is out
6. Accidental Release Measures
Methods for containment
Eliminate all ignition sources (no smoking, flares, sparks, or flames
in immediate area).Stop leak if you can do so without risk. Move the
cylinder to a safe and open area if the leak is irreparable. Stop the
flow of material, if this is without risk. Use water spray to reduce
vapors or divert vapor cloud drift. Prevent entry into waterways,
sewers, basements or confined aresas.
Methods for cleaning up
Should not be released into the environment. Use a non-combustible
material like vermiculite, sand or earth to soak up the product and place
into a container for later disposal.
Small Spills: Wipe up with absorbent material (e.g. cloth, fleece).
Clean contaminated surface thoroughly. After removal flush
contaminated area thoroughly with water.
Trade name MSDS SV
Product #: 0823# Fusing MachineBelt Cleaner
3/8
WWW.SPRAYVAN.COM
7. Handling and Storage
Handling Pressurized container: Do not pierce or burn, even after use. Do not
handle or store near an open flame, heat or other sources of ignition.
Do not use if spray button is missing ordefective. Use only with
adequate ventilation. Do not get this material in contact with eyes.
Do not get this material in contact with skin. Wear personal
protective equipment. Avoid prolonged exposure.
Storage Level 1 Aerosol.
Contents under pressure. Do not puncture, incinerate or crush. The
pressure in sealed containers can increase under the influence of
heat. Avoid exposure to long periods of sunlight. Keep in an area
equipped with sprinklers. Keep out of the reach of children. Do not
store, incinerate, or heat this material above 120 degrees Fahrenheit.
8. Exposure Controls / Personal Protection
Exposure limits
ACGIH
Components CAS # TWA STEL Ceiling
Trichloroethylene 79-01-6 10 ppm Not established Not established
Propane 74-98-6 1000 ppm Not established Not established
OSHA
Components CAS # TWA STEL Ceiling
Trichloroethylene 79-01-6 100 ppm Not established Not established
Propane 74-98-6 1000 ppm Not established Not established
Personal protective equipment
Eye / face protection Wear chemical goggles.
Skin protection Wear appropriate chemical resistant gloves. Wear appropriate
chemical resistant clothing.
Respiratory protection Wear positive pressure self-contained breathing apparatus
(SCBA). If permissible levels are exceeded use NIOSH
mechanical filter / organic vapor cartridge or anair-supplied
respirator.
Trade name MSDS SV
Product #: 0823# Fusing MachineBelt Cleaner
4/8
WWW.SPRAYVAN.COM
9. Physical & Chemical Properties
Appearance Compressed liquefied gas.
Boiling point 237.2 °F (113.9 °C) estimated
Color Cloudy.
Flammability (HOC) 10.771 kJ/g estimated
Flash back No
Flash point -156 °F (-104.4 °C) Propellant
Form Aerosol.
Odor Chlorine..
pH Not applicable
Physical state Liquid.
Pressure 70 - 80 psig @ 70F
Solubility Partially
Specific gravity 0.9434 estimated
10. Chemical Stability & Reactivity Information
Chemical stability Risk of ignition.
Conditions to avoid Heat, flames and sparks.
Hazardous decomposition products
Irritants. Toxic gas. May include oxides of sulphur.
11. Toxicological Information
Acute effects Acute LD50: 2710 mg/I/4h estimated, Rat, Inhalation
Sensitization Not expected to be hazardous by OSHA criteria.
Carcinogenicity Hazardous by OSHA criteria.
Teratogenicity Not expected to be hazardous by OSHA criteria.
12. Ecological Information
Ecotoxicity Components of this product are hazardous to aquatic life.
LC50 78.15 mg/L, Fish, 96.00 Hours,
EC50 4.32 mg/L, Daphnia, 48.00 Hours,
Trade name MSDS SV
Product #: 0823# Fusing MachineBelt Cleaner
5/8
WWW.SPRAYVAN.COM
13. Disposal Considerations
Waste codes D001: Waste Flammable material with a flash point <140 F
D040: Waste Trichloroethylene
Disposal instructions Contents under pressure. Do not puncture, incinerate or crush.
Dispose of this material and its container at hazardous or special
waste collection point. Do not allow this material to drain into
sewers/water supplies. If discarded, this product is considered a
RCRA ignitable waste, D001. Dispose in accordance with all
applicable regulations.
14. Transport Information
Department of Transportation (DOT) Requirements
Basic shipping requirements:
Proper shipping name Consumer commodity
Hazard class ORM-D
Subsidiary hazard class None
Additional information:
Packaging exceptions 156, 306
Packaging non bulk 156, 306
Packaging bulk None
IMDG
Basic shipping requirements:
Proper shipping name AEROSOLS
Hazard class 2.1
Subsidiary hazard class 6.1
UN number 1950
Additional information:
Packaging exceptions LTD QTY
Labels required 2.1，6.1
IATA
Basic shipping requirements:
Proper shipping name Aerosols, flammable, containing substances in Division
6.1，Packing Group III
Hazard class 2.1
Trade name MSDS SV
Product #: 0823# Fusing MachineBelt Cleaner
6/8
WWW.SPRAYVAN.COM
Subsidiary hazard class 6.1
UN number 1950
Additional information:
Packaging exceptions LTD QTY
Labels required 2.1, 6.1
15. Regulatory Information
US federal regulations This product is a "Hazardous Chemical" as defined by
the OSHA Hazard Communication Standard, 29 CFR
1910.1200
U.S. - CERCLA/SARA - Section 313 - Emission Reporting
Trichloroethylene 79-01-6 0.1 % de minimis concentration
Occupational Safety and Health Administration (OSHA)
29 CFR 1910.1200 hazardous Yes
chemical
CERCLA (Superfund) reportable quantity
Trichloroethylene:100.0000
Superfund Amendments and Reauthorization Act of 1986(SARA)
Hazard categories Immediate Hazard - Yes
Delayed Hazard - Yes
Fire Hazard - Yes
Pressure Hazard - Yes
Reactivity Hazard - No
Section 302 extremely No
hazardous substance
Section 311 hazardous chemical Yes
Inventory status
Country(s) or region Inventory name On inventory (yes/no)*
China Inventory of Existing Chemical Substances in China (IECSC) Yes
Europe European Inventory of New and Existing Chemicals (EINECS) No
Europe European List of Notified Chemical Substances (ELINCS) No
Japan Inventory of Existing and New Chemical Substances (ENCS) YES
Korea Existing Chemicals List (ECL) YES
United States & Puerto Rico
Trade name MSDS SV
Product #: 0823# Fusing MachineBelt Cleaner
7/8
WWW.SPRAYVAN.COM
Toxic Substances Control Act (TSCA) Inventory Yes
A "Yes" indicates that all components of this product comply with the inventory
requirements administered by the governing country(s)
State regulations WARNING: This product contains a chemical known to the state of
California to cause cancer.
U.S. - Pennsylvania - RTK (Right to Know) List
Propane 74-98-6 Present
Trichloroethylene 79-01-6 Environmental hazard
16. Other Information
Further in formation HMIS@ is a registered trade and service mark of the NPCA.
HMIS ratings Health: 1*
Flammability: 2
Physical hazard: 0
Disclaimer The information provided in this Safety Data Sheet is correct
to the best of our knowledge, information and belief at the date
of its publication. The information given is designed only as a
guidance for safe handling, use, processing, storage,
transportation,disposal and release and is not to be
considered a warranty or quality specification. The information
relates only to the specific material designated and may not be
valid for such material used in combination with any other
materials or in any process, unless specified in the text. The
information provided in this Safety Data Sheet is correct to the
best of our knowledge, information and belief at the date of its
publication, The information given is designed only as a
guidance for sage handling, use, processing, storage,
transportation, disposal and release and is not to be
considered a warranty or quality specification, The information
relates only to the specific material designated and may not be
valid for such material used in combination with and other
materials or in any process, unless specified in the text.
Prepared by Regulatory Compliance
Trade name MSDS SV
Product #: 0823# Fusing MachineBelt Cleaner
8/8
