QUALITY CERTIFICATE - EN 10204 3.
1
NO Description of goods Standart Condition of material Type of packages
1 Hot rolled alloyed round steel in coils EN ISO 683-2 hot rolled (+A) coils
NO HEAT NUMBER Grade Material code Diameter, mm Length, mm Reduction Ratio
1 310444 41Cr4 22
total
Chemical Composition, % -Remark: in rolled product
NO HEAT NUMBER C Si Mn P S Cr Ni Cu Mo Nb B V Al N Ti Sn CEV
1 310444 0,4 0,22 0,72 0,007 0,022 0,93 0,07 0,09 0,1 0,0002 0,0003 0,002 0,018 0,01 0,001 0,012 0,71
Mechanical properties
NO HEAT NUMBER Ultimate strength Rm-Mpa Yield strength Re-Mpa Relative elongation A,% Relative reducing Z,% Impact strength +20 C KV, J Hardnes HB
1 310444 914 779 20,6 62 169
Hardenability
Distance from the end of bar,
NO HEAT NUMBER 1,5 3 5 7 9 11 13 15 20 25 30 35 40
x1/16" acc.to ISO 642
Metallagraphy
Banding Non metallic Inclusions acc. To DIN 50602 (K)
Macrostructure
NO HEAT NUMBER Austenic Grain size ( segregation) : A B C D K3
acc. UNI 8449 thin thick thin thick thin thick thin thick ( oxides) S R C
1 310444 7 0 satisfactory
satisfactory
Additional İnformation Approval
Method of manufacturing : EAF, ladle treated, RH vacuum degasser bloom cast 250x300, shrouded stream, EMS
Free of radio-activity contamination. Material is free mercury. The steel does not have radiation more than the natural value and its level is less than 100 Bq/kg
Sizes and tolerances : acc. To DIN EN 10017
Quality of surfaces:The depth of surface defects should not exceed 0,75% of the actual diameter according to class B accorting to EN 10221. defects with a depth of more than 0,75%
are removed by gentle grinding with a depth of not more than 2,5%, counting from the actual size.
