MPCA GWALIOR MEF BOQ - Electrical

Labour Rate
SR.
Description of Item Qty Unit
NO
Unit Rate Total Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS
PVC insulated copper conductor
single core cable in surface / recessed medium class PVC conduit, with modular
1
switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS
PVC insulated
copper conductor single core cable etc. as required.
Group C
3800 EACH 100 380000
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper
conductor single core cable in surface / recessed medium class PVC conduit, 2 way
modular switch, modular plate, suitable GI box and earthing the point with 1.5
2 200 EACH 100 20000
sq.mm FRLS PVC insulated copper conductor single core cable etc. as
required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor
single core cable in surface/
3 recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS 650 METER 10 6500
PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor
single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos. 4
4 sq. mm FRLS PVC insulated copper conductor single core cable for loop 1800 METER 15 27000
earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of
FRLS PVC insulated copper conductor, single core cable in surface/ recessed
5
medium class PVC conduit as
required.
a 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 650 METER 8 5200
b 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 15000 METER 8 120000
c 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 800 METER 10 8000
d 2 X 6 sq. mm + 1 X 6 sq. mm earth wire 800 METER 15 12000
e 4 X 4 sq. mm + 2 X 4 sq. mm earth wire 1200 METER 15 18000
f 4 X 6 sq. mm + 2 X 6 sq. mm earth wire 1200 METER 16 19200
g 4 X 10 sq. mm + 2 X 6 sq. mm earth wire 1300 METER 20 26000
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed
copper conductor, unarmored telephone cable in the existing surface/ recessed steel/
6
PVC conduit as
required.
2 Pair 600 METER 5 3000
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor
PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in
7 900 METER 5 4500
the existing
surface/ recessed steel/ PVC conduit as required.
Supplying and fixing of following sizes of medium class PVC conduit along with
accessories in surface/recess including cutting the wall and making good the same in
8
case of recessed
conduit as required.
a 20 mm 1300 METER 5 6500
b 25 mm 1200 METER 5 6000
Supplying and fixing metal box of following sizes (nominal size) on surface or in
9 recess with suitable size of phenolic laminated
sheet cover in front including painting etc. as required.
a 100 mm X 100 mm X 60 mm deep 30 EACH 10 300
b 200 mm X 150 mm X 60 mm deep 30 EACH 15 450
c 200 mm X 250 mm X 60 mm deep 30 EACH 20 600
d 250 mm X 300 mm X 60 mm deep 30 EACH 25 750
Supplying and fixing following modular switch/ socket on the
10 existing modular plate & switch box including connections but excluding modular
plate etc. as required.
a Telephone socket outlet 15 EACH 15 225
b TV antenna socket outlet 7 EACH 15 105
c Bell push 47 EACH 15 705
Supplying and fixing two module stepped type electronic fan regulator on the existing
11 modular plate switch box including 202 EACH 20 4040
connections but excluding modular plate etc. as required.
 Supplying and fixing modular blanking plate on the existing modular plate & switch
12 box excluding modular plate as 37 EACH 5 185
required.
Supplying and fixing following size/ modules, GI box alongwith modular base & cover
13 plate for modular switches in recess etc.
as required.
a 1 or 2 Module (75mmX75mm) 315 EACH 15 4725
b 3 Module (100mmX75mm 525 EACH 15 7875
c 4 Module (125mmX75mm 200 EACH 15 3000
d 6 Module (200mmX75mm) 300 EACH 20 6000
e 8 Module (125mmX125mm) 300 EACH 20 6000
f 12 Module (200mmX150mm) 115 EACH 20 2300
Supplying and fixing suitable size GI box with modular plate and cover in front on
surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet
14 500 EACH 20 10000
and 5/6 A modular
switch, connections etc. as required.
Supplying and fixing suitable size GI box with modular plate and cover in front on
surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular
15 450 EACH 20 9000
socket outlet and 15/16 A
modular switch, connections etc. as required.
16 Supplying and fixing call bell/ buzzer suitable for single phase,
47 EACH 15 705
230 V, complete as required.
Supplying and fixing following way, single pole and neutral, sheet steel, MCB
distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar,
18 neutral bus bar, earth bar, din bar, interconnections, powder painted including
earthing etc. as required. (But without MCB/RCCB/Isolator)

a 12 way , Double door 24 EACH 150 3600

b 16 way, Double door 18 EACH 200 3600
Supplying and fixing following way, horizontal type three pole and neutral, sheet
steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper
bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted
19
including earthing etc. as required. (But without
MCB/RCCB/Isolator)

a 4 way (4 + 12), Double door 60 EACH 200 12000

b 6 way (4 + 18), Double door 48 EACH 250 12000
c 8 way (4 + 24), Double door 12 EACH 250 3000
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V,
TPN MCB distribution board of sheet steel, dust protected, duly powder painted,
inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for
20 mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type
MCB TPDB is normally used
where 3 phase outlets are required.)

12 way (4 + 36), Double door 16 EACH 300 4800

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit
breaker suitable for inductive load of following poles in the existing MCB DB complete
21
with
connections, testing and commissioning etc. as required.
a Single pole 2364 EACH 10 23640
b Double pole 42 EACH 35 1470
c Triple pole 192 EACH 50 9600
d Triple pole and neutral 16 EACH 75 1200
Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and
earth, metal enclosed plug top
alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess,
22 80 EACH 50 4000
with chained metal cover for the socket out let and complete with connections, testing
and commissioning
etc. as required.

Supplying and installing following size of perforated Hot

Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns)
23 with perforation not more than 17.5%, in convenient sections, joined with connectors,
suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as
required.
a 100 mm width X 50 mm depth X 1.6 mm thickness 120 METER 15 1800
b 150 mm width X 50 mm depth X 1.6 mm thickness 200 METER 15 3000
c 225 mm width X 50 mm depth X 1.6 mm thickness 300 METER 20 6000
d 300 mm width X 50 mm depth X 1.6 mm thickness 300 METER 25 7500
e 450 mm width X 50 mm depth X 2.0 mm thickness 180 METER 26 4680
f 600 mm width X 50 mm depth X 2.0 mm thickness 75 METER 30 2250
g 750 mm width X 62.5 mm depth X 2.0 mm thickness 75 METER 40 3000
Supplying and installing following size of perforated Hot Dipped Galvanised Iron
cable tray "bends" (galvanisation not less than 50 microns) with perforation not more
than 17.5%, in convenient sections, joined with connectors, suspended from the
24
ceiling with G.I. suspenders including G.I. bolts & nuts, etc.
as required.

a 100 mm width X 50 mm depth X 1.6 mm thickness 15 EACH 15 225

b 150 mm width X 50 mm depth X 1.6 mm thickness 12 EACH 15 180
c 225 mm width X 50 mm depth X 1.6 mm thickness 12 EACH 25 300
d 300 mm width X 50 mm depth X 1.6 mm thickness 12 EACH 25 300
e 450 mm width X 50 mm depth X 2.0 mm thickness 12 EACH 30 360
f 600 mm width X 50 mm depth X 2.0 mm thickness 12 EACH 30 360
g 750 mm width X 62.5 mm depth X 2.0 mm thickness 12 EACH 30 360
Supplying and installing following size of perforated Hot Dipped Galvanised Iron
cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more
25 than 17.5%, in convenient sections, joined with connectors, suspended from the
ceiling
with G.I. suspenders including G.I. bolts & nuts, etc. as required
a 100 mm width X 50 mm depth X 1.6 mm thickness 6 EACH 20 120
b 150 mm width X 50 mm depth X 1.6 mm thickness 6 EACH 20 120
c 225 mm width X 50 mm depth X 1.6 mm thickness 4 EACH 25 100
d 300 mm width X 50 mm depth X 1.6 mm thickness 4 EACH 25 100
e 450 mm width X 50 mm depth X 2.0 mm thickness 4 EACH 30 120
f 600 mm width X 50 mm depth X 2.0 mm thickness 2 EACH 30 60
g 750 mm width X 62.5 mm depth X 2.0 mm thickness 2 EACH 35 70
Supplying and installing following size of perforated Hot Dipped Galvanised Iron
cable tray "Cross member"(galvanisation not less than 50 microns) with perforation
not more than 17.5%, in convenient sections, joined with connectors, suspended from
26
the ceiling with G.I. suspenders including G.I. bolts & nuts, etc
as required.

a 100 mm width X 50 mm depth X 1.6 mm thickness 5 EACH 20 100

b 150 mm width X 50 mm depth X 1.6 mm thickness 5 EACH 20 100
c 225 mm width X 50 mm depth X 1.6 mm thickness 3 EACH 30 90
d 300 mm width X 50 mm depth X 1.6 mm thickness 3 EACH 35 105
e 450 mm width X 50 mm depth X 2.0 mm thickness 3 EACH 35 105
f 600 mm width X 50 mm depth X 2.0 mm thickness 3 EACH 35 105
g 750 mm width X 62.5 mm depth X 2.0 mm thickness 3 EACH 35 105
Supplying and installing following size of perforated Hot Dipped Galvanised Iron
cable tray "Reducer" (galvanisation not less than 50 microns) with perforation not
more than17.5%, in convenient sections, joined with connectors, suspended from the
27
ceiling with G.I. suspenders including G.I. bolts & nuts, etc
as required.

a 100 mm width X 50 mm depth X 1.6 mm thickness 5 EACH 15 75

b 150 mm width X 50 mm depth X 1.6 mm thickness 5 EACH 15 75
c 225 mm width X 50 mm depth X 1.6 mm thickness 3 EACH 30 90
d 300 mm width X 50 mm depth X 1.6 mm thickness 3 EACH 30 90
e 450 mm width X 50 mm depth X 2.0 mm thickness 3 EACH 30 90
f 600 mm width X 50 mm depth X 2.0 mm thickness 3 EACH 30 90
g 750 mm width X 62.5 mm depth X 2.0 mm thickness 3 EACH 30 90

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories,
and providing masonry enclosure with cover plate having locking arrangement and
28 20 EACH 500 10000
watering pipe of
2.7 metre long etc. with charcoal/ coke and salt as required.
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including
accessories, and providing masonry enclosure with cover plate having locking
29 4 EACH 900 3600
arrangement and watering pipe
of 2.7 metre long etc. with charcoal/ coke and salt as required.
Supplying and laying 6 SWG G.I. wire at 0.50 metre below
30 ground level for conductor earth electrode, including connection/ termination with GI 50 METER 5 250
thimble etc. as required.
 Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip
earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer
31 etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut 180 METER 12 2160
bolt & spring washer spaced at 50mm)

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth
32 electrode including connection with brass nut, 40 METER 25 1000
bolt, spring, washer excavation and re-filling etc. as required.
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth
33 electrode including connection with G.I. nut, 60 METER 15 900
bolt, spring, washer excavation and re-filling etc. as required.
34 Providing and fixing 25 mm X 5 mm copper strip on surface or in
137 METER 25 3425
recess for connections etc. as required.
35 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in
400 METER 15 6000
recess for connections etc. as required.
36 Providing and fixing 4.00 mm dia copper wire on surface or in
37 METER 5 185
recess for loop earthing as required.
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories,
and providing masonry enclosure with cover plate having locking arrangement and
37 19 EACH 500 9500
watering pipe of
2.7 metre long etc. with charcoal/ coke and salt as required.
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long,
G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate
38 50 EACH 50 2500
including holes etc.
complete as required.
Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any
39 other metallic object) by riveting / nut 50 EACH 5 250
bolting/ sweating and soldering etc as required.
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for
40 lightning conductor complete as 1500 METER 7 10500
required.(For horizontal run)
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for
41 lightning conductor complete as 1250 METER 15 18750
required.(For vertical run)
Providing and fixing testing joint, made of 20 mm X 3 mm thick
42 G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers 50 EACH 12 600
etc. complete as required.
43 Providing and laying G.I. tape 32 mm X 6 mm from earth
400 METER 25 10000
electrode directly in ground as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1
KV grade of following size direct in ground including excavation, sand cushioning,
44
protective covering and
refilling the trench etc as required.
a Upto 35 sq. mm 300 METER 100 30000
b Above 35 sq. mm and upto 95 sq. mm 200 METER 150 30000
c Above 95 sq. mm and upto 185 sq. mm 200 METER 200 40000
d Above 185 sq. mm and upto 400 sq. mm 200 METER 300 60000

sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the
same trench in one tier horizontal formation including excavation, sand cushioning,
45
protective
covering and refilling the trench etc as required.
a Upto 35 sq. mm 300 METER 75 22500
b Above 35 sq. mm and upto 95 sq. mm 200 METER 100 20000
c Above 95 sq. mm and upto 185 sq. mm 200 METER 115 23000
d Above 185 sq. mm and upto 400 sq. mm 200 METER 150 30000

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1
KV grade of following size direct in ground including excavation and refilling the
46
trench etc as required, but
excluding sand cushioning and protective covering.
a Upto 35 sq. mm 25 METER 35 875
b Above 35 sq. mm and upto 95 sq. mm 25 METER 40 1000
c Above 95 sq. mm and upto 185 sq. mm 25 METER 40 1000
d Above 185 sq. mm and upto 400 sq. mm 25 METER 60 1500
Laying of one number additional PVC insulated and PVC sheathed / XLPE power
cable of 1.1 KV grade of following size direct in ground in the same trench in one tier
47 horizontal formation including excavation and refilling the trench etc as
required, but excluding sand cushioning and protective covering.

a Upto 35 sq. mm 25 METER 35 875

b Above 35 sq. mm and upto 95 sq. mm 25 METER 45 1125
c Above 95 sq. mm and upto 185 sq. mm 25 METER 55 1375
d Above 185 sq. mm and upto 400 sq. mm 25 METER 75 1875
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1
48 KV grade of following size in the existing
RCC/ HUME/ METAL pipe as required.
a Upto 35 sq. mm 5000 METER 35 175000
b Above 35 sq. mm and upto 95 sq. mm 1000 METER 40 40000
c Above 95 sq. mm and upto 185 sq. mm 1000 METER 40 40000
d Above 185 sq. mm and upto 400 sq. mm 2500 METER 60 150000
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1
49 KV grade of following size in the existing
masonry open duct as required.
a Upto 35 sq. mm 50 METER 30 1500
b Above 35 sq. mm and upto 95 sq. mm 50 METER 35 1750
c Above 95 sq. mm and upto 185 sq. mm 50 METER 40 2000
d Above 185 sq. mm and upto 400 sq. mm 50 METER 60 3000
Laying and fixing of one number PVC insulated and PVC
50 sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as
required.
a Upto 35 sq. mm (clamped with 1mm thick saddle) 300 METER 40 12000
b Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat
150 METER 65 9750
clamp)
c Above 95 sq. mm and upto 185 sq. mm (clamped with
100 METER 65 6500
25/40x3mm MS flat clamp)
d Above 185 sq. mm and upto 400 sq. mm (clamped with
100 METER 70 7000
40x3mm MS flat clamp)
Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm
51 at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including 20 EACH 250 5000
inscription duly engraved as required.

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate
with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm
52 25 EACH 210 5250
long and fixing the
same in ground as required.
Laying of one number XLPE power cable of 33 KV grade of following size direct in
ground including excavation, sand cushioning, protective covering and refilling the
53
trench etc as
required.
Above 120 sq. mm and upto 400 sq. mm 50 METER 300 15000
Laying of one number additional XLPE power cable of 33 KV grade of following size
direct in ground in the same trench in one tier horizontal formation including
54 excavation, sand cushioning, protective covering and refilling the trench etc as
required.

Above 120 sq. mm and upto 400 sq. mm 50 METER 200 10000
Laying of one number XLPE power cable of 33 KV grade of following size in the
55 existing RCC/ HUME/ METAL pipe as
required.
Above 120 sq. mm and upto 400 sq. mm 100 METER 50 5000
Supplying and making end termination with brass compression gland and aluminium
lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium
56
conductor cable of 1.1 KV
grade as required.
a 3½ X 25 sq. mm (28mm) 24 EACH 40 960
b 3½ X 35 sq. mm (32mm) 24 EACH 50 1200
c 3½ X 50 sq. mm (35mm) 32 EACH 50 1600
d 3½ X 70 sq. mm (38mm) 32 EACH 65 2080
e 3½ X 95 sq. mm (45mm) 24 EACH 65 1560
f 3½ X 120 sq. mm (45mm) 16 EACH 75 1200
g 3½ X 150 sq. mm (50mm) 32 EACH 90 2880
h 3½ X 185 sq. mm (57mm) 32 EACH 90 2880
i 3½ X 240 sq. mm (62mm) 64 EACH 100 6400
j 3½ X 300 sq. mm (70mm) 64 EACH 100 6400
k 3½ X 400 sq. mm (82mm) 80 EACH 350 28000
l 4 X 10 sq. mm (25mm) 184 EACH 20 3680
m 4 X 16 sq. mm (28mm) 184 EACH 25 4600
 Erection of RCC/ PCC pole of following length in brick ballast and ramming the
foundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with
59
including excavation
and refilling etc as required.
Above 11.00 metre and upto 13.00 metre 4 EACH 500 2000
Supplying and embedding following dia G.I. pipe (medium class) in pole collar/
foundation (during casting) for cable entry including bending the pipe to the required
60
shape complete as
required.
a 32 mm dia 50 EACH 50 2500
b 40 mm dia 10 EACH 65 650
Supplying, erection and testing of approved make electric Ceiling fan of double ball
bearing complete with standard length anti suicide down rod, canopy, hanging
shackle, Aluminium blades, without regulator, A.C. 230-250 volts including
65
connections with all necessary material complete as required confirming to IS
:374/1979 with upto date ammendments.

a Ceiling Fan (5 star & ISI)-1200 mm Sweep 160 EACH 50 8000

b Ceiling Fan ( ISI)-1400 mm Sweep 50 EACH 50 2500
Supplying, erection and testing of approved make Wall
Mounting fan complete with Wall Bracket ,canopy, blades, speed Regulator etc .A.C
66 230-250 volts with connections and including raw bolt/Anchor hole fastener etc.
complete finished of approved as required.

400 sweep 50 EACH 50 2500

Supplying and fixing of Deluxe fresh air fan with louvers (ventilating fan ) with self
closing louvers of decorative PVC blades mounting square frame of approved make
67 complete with all necessary material as
required

200mm RPM1300/1400 Min. 7 EACH 50 350

Supplying, erecting and testing of approved make Exhaust Fan heavy duty with
mounting frame, blades AC 230-250 complete connection and including, frame bolt/
68
Anchor hole
fastners etc. complete finished of approved as required.
300mm sweep 900 RPM 160 EACH 150 24000
Supply and fixing Led tube rod comprising of LED tube with non integral / integral
driver, 6500K color temp having 40000 burning hrs life with minimum @ L 70, system
lumen output should be minimum with efficacy > 80 lm/W. LED driver PF 0.95 & THD
< 20%. The colour rendering index of LED light should be more than 70. Submission
69 LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved
lab. Manufacturer mandatory i/c connection wire, testing etc. to complete the
job. 2 Yrs Guarantee certificate from manufacturer.

1 X 18/20/22W, Integral 500 Each 75 37500

Supply and fixing of recessed mounting type Led light fixture, LED of 1 to 3 W
each assembled on single MCPCB, having color temp 4000K TO 6500K &
having 25000 to 50000 burning hrs life with minimum @ L 80, system lumen output
should be minimum with efficacy>80lm/W. LED driver, PF 0.90. The colour rendering
index of LED light should be more than 70. Housing made of CRCA with glare free
70
diffused polycarbonate cover. Submission LM 80-08 Form LED Source Manufacturer
& LM79-08 / IS16106 from NABL approved lab. Manufacturer manadatory i/c
connection wire, testing etc. to complete the job. 2 Yrs Guarantee certificate from
manufacturer.

a Led luminiare 1' X 1', 24W , 4-6.5k 19 Each 75 1425

b Led luminiare 2' X 2', 36W, 4-6.5K 250 Each 75 18750
Supply and fixing of Surface mounting type Led light fixture, LED of
1 to 3 W each assembled on single MCPCB, having color temp 4000K TO
6500K & having 25000 to 50000 burning hrs life with minimum @ L 80, system
lumen output should be minimum with efficacy>80lm/W. LED driver, PF 0.90. The
colour rendering index of LED light should be more than 70. Housing made of CRCA
71 with glare free diffused polycarbonate cover. Submission LM 80-08 Form LED Source
Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer
manadatory i/c connection wire, testing etc. to complete the job. 2 Yrs Guarantee
certificate from manufacturer.

Led luminiare 2' X 2', 36W , 4-6.5k 159 Each 50 7950

 Supply and fixing of surface mounting LED down lighter of 1 to 3 W each
assembled on single MCPCB, having color temp 4000K TO 6500K & having
25000 to 50000 burning hrs life with minimum @ L 80, system lumen output should
be minimum with efficacy>80lm/W. LED driver, PF 0.90. The colour rendering index
of LED light should be more than 70. Housing made of CRCA powder coated frame
72 with glare free diffused polycarbonate cover. Submission LM 80-08 Form LED Source
Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer
manadatory i/c connection wire, testing etc. to complete the job. 2 Yrs Guarantee
certificate from manufacturer.

a 7 W/ 8 W/ 9W, 100/150mm 364 Each 50 18200

b 15 W , 180/200mm 1000 Each 50 50000
Supply and fixing of recessed mounting LED down lighter of 1 to
3 W each assembled on single MCPCB, having color temp 4000K TO
6500K & having 25000 to 50000 burning hrs life with minimum @ L 80, system
lumen output should be minimum with efficacy>80lm/W. LED driver, PF 0.90. The
colour rendering index of LED light should be more than 70. Housing made CRCA
73 powder coated frame with glare freediffused polycarbonate cover. Submission LM 80-
08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab.
Manufacturer manadatory i/c connection wire, testing etc. to complete the job. 2
Yrs Guarantee certificate from manufacturer.

a 18W/ 20 W , 180/200mm 300 Each 50 15000

b 26W/ 28 W , 180/200mm 37 Each 50 1850

Supply of ISI marked and approved make of moulded case circuit breaker (MCCB)
suitable for 3 phase,3 pole, 50 Hz, 415 Volts, AC supply with respective interrupting
74
capacity (KA) at 415 Volts cited against their
range standard conforming to IS – 8828
MCCB 25kA current rating, 3P -25 to 100Amp & 80% -100% adjustable
6 Each 1200 7200

Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of 'C'
series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA
75
Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but
without enclosures :-
Four pole

a MCB FP For 40Amp 10kA rating 60 Each 150 9000

b MCB FP 50Amp to 63 Amp 10kA rating 60 Each 150 9000

Supply installation, testing and commissioning of 0.5 mm size solid annealed copper,
jelly filled telephone cables, polythene insulated, petroleum jelly filled with poly-al
76 laminate moisture barrier, polythene sheathed, unarmoured polythene jacketed
telephone cables as per DOT
specifications of following sizes
10 Pair 750 Metre 5 3750

Supply, installation testing and commissioning of telephone tag block krone connector
77
with enclosure complete as mentioned below :-
a 20 Pair 4 each 75 300
b 50 Pair 2 each 75 150

78 Supply, installation testing and commissioning RJ - 45 computer jack cat

6 with shutter modular (1Module)
RJ - 45 computer socket cat 6 with shutter modular (1Module) 210 each 20 4200
Supplying and drawing 4 pair un-shielded twisted pair (UTP), 0.5 mm PVC insulated
copper conductor un-armoured Cat-6 computer cable FRLS in existing
79 4700 Metre 5 23500
surface/concealed, steel/PVC. conduit/ casing-
n-capping as required.
80 Supply, installation testing and commissioning of patch cord as
mentioned below :-
a CAT 6 RJ45 patch cord UTP 1 metre 366 each 10 3660
b Supply, installation testing and commissioning of 19" modular patch - 1 U
13 each 300 3900
patch panel 24, RJ 45 cat-6 connector
c Supply, installation testing and commissioning of wall mounting rack, for
computer switches complete as mentioned below :-
d 9U cabinet 500X600X500, wall mounting with 6 point 5 Amp. socket
7 each 500 3500
power supply strip and fan, tray.
 Wiring for the IP 66 250 volts single phase and neutral 6 amps switched
socket outlet with
2- 2.5 sq.mm FRLS flexible copper conductor 1100 volts grade
wires of approved make in concealed or surface mounted with 25 mm dia medium
gauge PVC Conduit including providing and fixing of 6 amps 5 pin switch socket
outlet of approved qualitx color make & design in 2 mm thick GI box and earthing
81 of fixtures and the outlet box with 1-
1.5 sq.mm PVC insulated copper conductor stranded flexible "FRLS" wire for
earthing. One 6 A x 5 pin 250 Volt IP 66 socket outlet point controlled bx one 6 A
IP66 switch located on board of Legrand cat. No. 673000, 673044
& 684638 or SCAME make

a Maximum 2 Nos. Of 6A switch socket in one circuit 210 Points 250 52500
b Maximum 4 Nos. Of 6A switch socket in one circuit 120 Points 300 36000
c Maximum 6 Nos. Of 6A switch socket in one circuit 90 Points 400 36000
Wiring for the IP 66 250 volts single phase and neutral 16 amps IP 66 switched
socket outlet with
2.5 sq.mm FRLS flexible copper conductor 1100 volts grade wires of approved make
with concealed
or surface mounted 25 mm dia medium gauge PVC Conduit including providing and
fixing of 16 amps
82 5 pin IP 66 switch socket outlet of approved qualitx color make & design in 2 mm thick
PVC box and
earthing of fixtures and the outlet box with 1.5 sq.mm PVC insulated copper
conductor stranded flexible
"FRLS" wire. for earthing of Legrand cat. No. 673008, 673045 & 684638
or SCAME make

a Maximum 1 Nos. Of 16A switch socket in one circuit 45 Points 625 28125
b Maximum 2 Nos. Of 16A switch socket in one circuit 40 Points 625 25000
c Maximum 3 Nos. Of 16A switch socket in one circuit 36 Points 625 22500
d Maximum 4 Nos. Of 16A switch socket in one circuit 34 Points 625 21250
Supplying, installing on wall or suspension on ceiling, testing and commissioning of
following capacity Air Insulated Compact Type Bus Trunking for use on 3 phase 4
wire 415 V, 50Hz A.C. Supply with metal clad enclosure having IP-54 rating after
fixing the tap off boxes and all accessories, made of 1.6mm thick steel sheet dulx
powder coated in convenient sections complete with 4 Nos. aluminium bus bars
83 having current density of 130 A/ sq. cm at nominal current rating, necessary joints,
elbow joints & expansion joints, fire barrier at each floor, continuous earthing with 2
Nos. aluminium strip of suitable size (one on each side) including, G.I. clamping
brackets, suspenders, angle iron bracket, steel fasteners, connecting to earthing
sxstem etc. as required.

a 200 amps 15KA SC for 1 sec 169 Meter 550 92950

b 630 amps 50KA SC for 1 sec 281 Meter 800 224800

95 Supply & fixing anti climbing device with 2 ply G.I. barbed wire 1 Kg. per
50 Each 75 3750
pole complete as per MPMKVVCO. Specification.
Supply, laying and fixing of G.I. earth coil of 4mm dia G.I. wire having 120 turns of
96 nearly 50mm dia. and 3 mt. long tail in existing pit duly earthed with pole etc complete 1 Each 45 45
as required as per specification.
Supply & fixing fencing of chain link mesh 100 x 100 mm, 12 SWG GI wire for electric
sub-station switch yard including single post of angle iron size 50x50x5mm, 2.5 mt
long should be provided upto 2.00 mt. apart or as required with angle iron/ flat iron
members /cross members including mesh fix on frame and erected between the post.
The angle iron post shall be erected in cement concrete M-15 (1:2:4) (20 mm graded
97 metal) foundation, cement concrete, excavation of pit and refilling the same. 60 sq.mt 75 4500
The fencing shall be provided with one entrance gate including locking arrangement
as required as per specification. The height of fencing shall be 2 mt. above ground
level. Fencing shall be painted with required
shade.

Supplying and erection of water tight terminal box made of PC-GFS

(polycarbonate),IP 66 /IP 67 (cable entry systems LES) in accordance with IEC 60670-
22, resistant to weather influences (UV due to solar radiation, protected against
rainwater, temperature resistant, impact resistant, etc. insulation voltage 1000 V
a.c./d.c., wall thickness of the bottom part 2 / 2.7 mm of required size suitable for kit
100 kat/MCB/switch including 2 nos. pole clamp of M.S. flat iron size 32x3mm, nut and
bolts, excluding the cost of the kit kat/MCB/Switch, 4 Pole epoxy connector nut & bolt
type, 30Amp, 500Volt complete as per specification as mentioned
below.

104 x 104 x 70 mm 56 Each 50 2800

 Providing and erection of hot dipped galvanized octagonal poles in single section
made from 3mm thick sheet having lockable weather proof flush door junction box,
102 suitable size & type of foundation bolts 4 nos. 'J' type (EN8 grade) complete, erected
in an approved manner on provided
foundation.
a
5 meter height 130 X 70mm A/F, 200x200x12mm base plate, 4 nos X 16
36 Each 750 27000
x 450mm bolt
b 8 meter height, 135 X 70mm A/F, 225x225x16mm base plate, 4 nos. X
16 Each 800 12800
20 x 750mm bolt
110 Supply of rubber mat 2 x 1.0Mtr, 1100V tested 2 Each 75 150
111 Supply of hand gloves 11KV tested 1 Each 25 25
112 Supply of fiber discharge rod I/C connection copper lead tested 1 Each 125 125
113 Supply of fiber D.O operating rod for 11/33KV tested 1 Each 125 125
114 Supply of first aid box complete with medicine & bandage as per
1 set 125 125
specification.
115 Supply of shock instruction chart duly framed with glass, as reqd. 1 Each 75 75
116 Collection and spreading of metal dust, murum and 40mm graded hard
metal in sub-station yard or as required as mentioned below -
Murum 4 Cu. Mt. 25 100

Supply,Installation, testing and commissioning of following Panel Board (as

described in Sr No. i) to viii below ) as per IS , Technical Specifications & respective
drawings. The unit rate for each item shall include Supply & delivery of the panels at
the site. Shifting of panels from site store to the suitable location.(If applicable)
Installation of panel in Electric room or Location suggested by client within campus
including removing packing. Earthing all components, frame etc. to a common internal
earth bar. Supply & fixing all accessories and supporting structure. Supply and fixing
of M.S. 100 mm. channels for fixing the panels connection, testing & commissioning.
120 The panels shall be compatible to BMS whereever shown in the SLD. Checking of
Internal connection and wiring, operation of switches, starter, MCCB, MCB, relays,
contactors etc. Supply of necessary tools, hardware, testing hardware, testing
equipment etc. Electrical contractor shall carry out the insulation test at site & all the
readings shall be submitted in duplicate to the consultant or engineer-in-charge.

a Main Electrical Panel -Part 1 1 2500 2500

As per SLD 668 - MPCA(E) - E - E - 3101

e EAST & WEST BLOCK MAIN PANEL 2 1500 3000

As per SLD 668 - MPCA(E) - E - E - 3100

f EXTERNAL LIGHTING DB 2 1000 2000

As per SLD 668 - MPCA(E) - E - E - 3100

g NORTH / SOUTH BLOCK PAVILION MAIN PANEL 2 1500 3000

As per SLD 668 - MPCA(E) - E - E - 3100

h TYPICAL MAIN LPDB FOR EAST / WEST STAND 6 2000 12000

As per SLD 668 - MPCA(E) - E - E - 3100

i TYPICAL MAIN LPDB FOR NORTH / SOUTH PAVILION 2 1000 2000

As per SLD 668 - MPCA(E) - E - E - 3100

l SOUTH STAND HVAC PANEL 1 1000 1000

As per SLD 668 - MPCA(E) - E - E - 3100

m NORTH STAND HVAC PANEL 1 1000 1000

As per SLD 668 - MPCA(E) - E - E - 3100

Providing & Laying of 4 pair shielded 0.5mm PVC insulated copper conductor un-
131 armoured Cat-6 computer cable FR in existing surface / 4500 Per Mtr. 5 22500
concealed steel / PVC conduit / Casing-N-Capping as required.
Approved Make : D-Link / Amp / Molex / Legrand
132 Providing & Laying of Single mode 6 core armoured Fibre Optic Cable .
2625 Per Mtr. 5 13125

Approved Make : D-Link / Amp / Molex / Legrand

Providing & Fixing of 4 meter MS pole with 80mm dia with base plate of 300 x 300 x
12mm thick duly painted in water and corrosion resistant paint in silver colour with all
4 Nos 1000 4000
accessories required for mounting complete
in all respect.
137 Providing & Laying PVC conduit ISI marked along with the accessories
in concealed system etc. as required
PVC . Conduit 25 mm (HMS)
1875 Per Mtr. 5 9375

26,54,605