Fortinet.Premium.NSE5_FMG-7.2.

89q
Number: NSE5_FMG-7.2
Passing Score: 800.0
Time Limit: 120.0
File Version: 1.7

Exam Code: NSE5_FMG-7.2

Exam Name: Fortinet NSE 5 - FortiManager 7.2

Website: www.VCEplus.io

Twitter: www.twitter.com/VCE_Plus
Exam A

QUESTION 1
View the following exhibit.
An administrator has created a firewall address object, Training, which is used in the Local-FortiGate policy package. When the install operation is
performed, which IP Netmask will be installed on the Local-FortiGate, for the Training firewall address object?

A. 10.0.1.0/24
B. It will create firewall address group on Local-FortiGate with 192.168.0.1/24 and 10.0.1.0/24 object values
C. 192.168.0.1/24
D. Local-FortiGate will automatically choose an IP Network based on its network interface settings.

Correct Answer: A
Section:

QUESTION 2
What will happen if FortiAnalyzer features are enabled on FortiManager?

A. FortiManager will reboot

B. FortiManager will send the logging configuration to the managed devices so the managed devices will start sending logs to FortiManager
C. FortiManager will enable ADOMs automatically to collect logs from non-FortiGate devices
D. FortiManager can be used only as a logging device.

Correct Answer: A
Section:

QUESTION 3
Which two statements about the scheduled backup of FortiManager are true? (Choose two.)

A. It does not back up firmware images saved on FortiManager.

B. It can be configured using the CLI and GUI.
C. It backs up all devices and the FortiGuard database.
D. It supports FTP, SCP, and SFTP.

Correct Answer: A, D
Section:

QUESTION 4
In addition to the default ADOMs, an administrator has created a new ADOM named Training for FortiGate devices. The administrator sent a device
registration to FortiManager from a remote FortiGate. Which one of the following statements is true?

A. The FortiGate will be added automatically to the default ADOM named FortiGate.
B. The FortiGate will be automatically added to the Training ADOM.
C. By default, the unregistered FortiGate will appear in the root ADOM.
D. The FortiManager administrator must add the unregistered device manually to the unregistered device manually to the Training ADOM using the
Add Device wizard

Correct Answer: C
Section:

QUESTION 5
An administrator would like to create an SD-WAN using central management. What steps does the administrator need to perform to create an SD-WAN
using central management?

A. First create an SD-WAN firewall policy, add member interfaces to the SD-WAN template and create a static route
B. You must specify a gateway address when you create a default static route
C. Remove all the interface references such as routes or policies
D. Enable SD-WAN central management in the ADOM, add member interfaces, create a static route and SDWAN firewall policies.

Correct Answer: D
Section:

QUESTION 6
Which of the following statements are true regarding schedule backup of FortiManager? (Choose two.)

A. Backs up all devices and the FortiGuard database.

B. Does not back up firmware images saved on FortiManager
C. Supports FTP, SCP, and SFTP
D. Can be configured from the CLI and GUI

Correct Answer: B, C
Section:

QUESTION 7
An administrator has added all the devices in a Security Fabric group to FortiManager.
How does the administrator identify the root FortiGate?

A. By a dollar symbol ($) at the end of the device name

B. By an at symbol (@) at the end of the device name
C. By a QUESTION NO : mark(?) at the end of the device name
D. By an Asterisk (*) at the end of the device name

Correct Answer: D
Section:

QUESTION 8
An administrator has added all the devices in a Security Fabric group to FortiManager.
How does the administrator identify the root FortiGate?

A. By a dollar symbol ($) at the end of the device name

B. By an at symbol (@) at the end of the device name
C. By a QUESTION NO : mark(?) at the end of the device name
D. By an Asterisk (*) at the end of the device name

Correct Answer: D
Section:
QUESTION 9
What does a policy package status of Modified indicate?

A. FortiManager is unable to determine the policy package status

B. The policy package was never imported after a device was registered on FortiManager
C. The Policy configuration has been changed on a managed device and changes have not yet been imported into FortiManager
D. The Policy package configuration has been changed on FortiManager and changes have not yet been installed on the managed device.

Correct Answer: B
Section:

QUESTION 10
View the following exhibit.

When using Install Config option to install configuration changes to managed FortiGate, which of the following statements are true? (Choose two.)

A. Once initiated, the install process cannot be canceled and changes will be installed on the managed device
B. Will not create new revision in the revision history
C. Installs device-level changes to FortiGate without launching the Install Wizard
D. Provides the option to preview configuration changes prior to installing them
Correct Answer: A, C
Section:

QUESTION 11
You are moving managed FortiGate devices from one ADOM to a new ADOM.
Which statement correctly describes the expected result?

A. Any pending device settings will be installed automatically

B. Any unused objects from a previous ADOM are moved to the new ADOM automatically
C. The shared policy package will not be moved to the new ADOM
D. Policy packages will be imported into the new ADOM automaticallyD

Correct Answer: C
Section:

QUESTION 12
In the event that the primary FortiManager fails, which of the following actions must be performed to return the FortiManager HA to a working state?

A. Secondary device with highest priority will automatically be promoted to the primary role, and manually reconfigure all other secondary devices to
point to the new primary device
B. Reboot one of the secondary devices to promote it automatically to the primary role, and reconfigure all other secondary devices to point to the
new primary device.
C. Manually promote one of the secondary devices to the primary role, and reconfigure all other secondary devices to point to the new primary
device.
D. FortiManager HA state transition is transparent to administrators and does not require any reconfiguration.

Correct Answer: C
Section:
Explanation:
FortiManager_6.4_Study_Guide-Online -- page 346
FortiManager HA doesn't support IP takeover where an HA state transition is transparent to administrators. If a failure of the primary occurs, the
administrator must take corrective action to resolve the problem that may include invoking the state transition. If the primary device fails, the
administrator must do the following in order to return the FortiManager HA to a working state:
1. Manually reconfigure one of the secondary devices to become the primary device
2. Reconfigure all other secondary devices to point to the new primary device

QUESTION 13
Which three settings are the factory default settings on FortiManager? (Choose three.)

A. Username is admin
B. Password is fortinet
C. FortiAnalyzer features are disabled
D. Reports and Event Monitor panes are enabled
E. port1 interface IP address is 192.168.1.99/24

Correct Answer: A, C, E
Section:

QUESTION 14
When an installation is performed from FortiManager, what is the recovery logic used between FortiManager and FortiGate for an FGFM tunnel?

A. After 15 minutes, FortiGate will unset all CLI commands that were part of the installation that caused the tunnel to go down.
B. FortiManager will revert and install a previous configuration revision on the managed FortiGate.
C. FortiGate will reject the CLI commands that will cause the tunnel to go down.
D. FortiManager will not push the CLI commands as a part of the installation that will cause the tunnel to go down.

Correct Answer: A
Section:
Explanation:
The configuration change will break the fgfm connection, causing the FortiGate unit to attempt to reconnect for 900 seconds. If the FortiGate cannot
reconnect, it will rollback to its previous configuration.

QUESTION 15
An administrator run the reload failure command: diagnose test deploymanager reload config
<deviceid> on FortiManager. What does this command do?

A. It downloads the latest configuration from the specified FortiGate and performs a reload operation on the device database.
B. It installs the latest configuration on the specified FortiGate and update the revision history database.
C. It compares and provides differences in configuration on FortiManager with the current running configuration of the specified FortiGate.
D. It installs the provisioning template configuration on the specified FortiGate.

Correct Answer: A
Section:

QUESTION 16
An administrator with the Super_User profile is unable to log in to FortiManager because of an authentication failure message.
Which troubleshooting step should you take to resolve the issue?

A. Make sure FortiManager Access is enabled in the administrator profile

B. Make sure Offline Mode is disabled
C. Make sure the administrator IP address is part of the trusted hosts.
D. Make sure ADOMs are enabled and the administrator has access to the Global ADOM

Correct Answer: C
Section:
Explanation:
Even if a user entered the correct userid/password, the FMG denies access if a user is logging in from an untrusted source IP subnets.

QUESTION 17
What are two outcomes of ADOM revisions? (Choose two.)

A. ADOM revisions can significantly increase the size of the configuration backups.
B. ADOM revisions can save the current size of the whole ADOM
C. ADOM revisions can create System Checkpoints for the FortiManager configuration
D. ADOM revisions can save the current state of all policy packages and objects for an ADOM
Correct Answer: A, D
Section:

QUESTION 18
View the following exhibit.

If both FortiManager and FortiGate are behind the NAT devices, what are the two expected results? (Choose two.)

A. FortiGate is discovered by FortiManager through the FortiGate NATed IP address.

B. FortiGate can announce itself to FortiManager only if the FortiManager IP address is configured on FortiGate under central management.
C. During discovery, the FortiManager NATed IP address is not set by default on FortiGate.
D. If the FCFM tunnel is torn down, FortiManager will try to re-establish the FGFM tunnel.

Correct Answer: A, C
Section:
Explanation:
Fortimanager can discover FortiGate through a NATed FortiGate IP address. If a FortiManager NATed IP address is configured on FortiGate, then
FortiGate can announce itself to FortiManager. FortiManager will not attempt to re-establish the FGFM tunnel to the FortiGate NATed IP address, if the
FGFM tunnel is interrupted. Just like it was in the NATed FortiManager scenario, the FortiManager NATed IP address in this scenario is not configured
under FortiGate central management configuration.

QUESTION 19
Which two settings must be configured for SD-WAN Central Management? (Choose two.)

A. SD-WAN must be enabled on per-ADOM basis

B. You can create multiple SD-WAN interfaces per VDOM
C. When you configure an SD-WAN, you must specify at least two member interfaces.
D. The first step in creating an SD-WAN using FortiManager is to create two SD-WAN firewall policies.

Correct Answer: A, C
Section:

QUESTION 20
An administrator wants to delete an address object that is currently referenced in a firewall policy.
What can the administrator expect to happen?

A. FortiManager will not allow the administrator to delete a referenced address object
B. FortiManager will disable the status of the referenced firewall policy
C. FortiManager will replace the deleted address object with the none address object in the referenced firewall policy
D. FortiManager will replace the deleted address object with all address object in the referenced firewall policy

Correct Answer: C
Section:

QUESTION 21
An administrator would like to review, approve, or reject all the firewall policy changes made by the junior administrators.
How should the Workspace mode be configured on FortiManager?

A. Set to workflow and use the ADOM locking feature

B. Set to read/write and use the policy locking feature
C. Set to normal and use the policy locking feature
D. Set to disable and use the policy locking feature
Correct Answer: A
Section:

QUESTION 22
Refer to the following exhibit:

Which of the following statements are true based on this configuration? (Choose two.)

A. The same administrator can lock more than one ADOM at the same time
B. Ungraceful closed sessions will keep the ADOM in a locked state until the administrator session times out
C. Unlocking an ADOM will submit configuration changes automatically to the approval administrator
D. Unlocking an ADOM will install configuration automatically on managed devices

Correct Answer: A, B
Section:

QUESTION 23
Refer to the exhibits.
Exhibit one.
Exhibit two.
An administrator created a new system template named Training with two new DNS addresses on FortiManager. During the installation preview stage,
the administrator notices that many unset commands need to be pushed.
What can be the main reason for these unset commands?

A. The DNS addresses in the default system settings are the same as the Training system template
B. The Training system template has other default settings
C. The ADOM is locked by another administrator
D. The Training system template does not have assigned devices

Correct Answer: B
Section:

QUESTION 24
An administrator would like to create an SD-WAN using central management in the Training ADOM.
To create an SD-WAN using central management, which two steps must be completed? (Choose two.)

A. Specify a gateway address when you create a default SD-WAN static route
B. Enable SD-WAN central management in the Training ADOM
C. Configure and install the SD-WAN firewall policy and SD-WAN static route before installing the SD-WAN template settings
D. Remove all the interface references such as routes or policies that will be a part of SD-WAN member interfaces

Correct Answer: B, D
Section:

QUESTION 25
View the following exhibit.
Which statement is true regarding this failed installation log?

A. Policy ID 2 is installed without a source address

B. Policy ID 2 will not be installed
C. Policy ID 2 is installed in disabled state
D. Policy ID 2 is installed without a source device

Correct Answer: B
Section:

QUESTION 26
Refer to the exhibit.

Which statement about the object named ALL is true?

A. FortiManager updated the object ALL using the FortiGate value in its database.
B. FortiManager installed the object ALL with the updated value.
C. FortiManager created the object ALL as a unique entity in its database, which can be only used by this managed FortiGate.
D. FortiManager updated the object ALL using the FortiManager value in its database.

Correct Answer: A
Section:

QUESTION 27
View the following exhibit.

What is the purpose of setting ADOM Mode to Advanced?

A. The setting allows automatic updates to the policy package configuration for a managed device
B. The setting enables the ADOMs feature on FortiManager
C. This setting allows you to assign different VDOMs from the same FortiGate to different ADOMs.
D. The setting disables concurrent ADOM access and adds ADOM locking

Correct Answer: C
Section:

QUESTION 28
An administrator, Trainer, who is assigned the Super_User profile, is trying to approve a workflow session that was submitted by another administrator,
Student. However, Trainer is unable to approve the workflow session.
What can prevent an admin account that has Super_User rights over the device from approving a workflow session?
A. Trainer is not a part of workflow approval group
B. Trainer does not have full rights over this ADOM
C. Trainer must close Student's workflow session before approving the request
D. Student, who submitted the workflow session, must first self-approve the request

Correct Answer: A
Section:

QUESTION 29
Refer to the exhibit.
You are using the Quick Install option to install configuration changes on the managed FortiGate.
Which two statements correctly describe the result? (Choose two.)

A. It will not create a new revision in the revision history

B. It installs device-level changes to FortiGate without launching the Install Wizard
C. It cannot be canceled once initiated and changes will be installed on the managed device
D. It provides the option to preview configuration changes prior to installing them

Correct Answer: B, C
Section:
Explanation:
FortiManager_6.4_Study_Guide-Online -- page 164
The Install Config option allows you to perform a quick installation of device-level settings without launching the Install Wizard. When you use this
option, you cannot preview the changes prior to committing. Administrator should be certain of the changes before using this install option, because the
install can't be cancelled after the process is initiated.

QUESTION 30
View the following exhibit:

How will FortiManager try to get updates for antivirus and IPS?

A. From the list of configured override servers with ability to fall back to public FDN servers
B. From the configured override server list only
C. From the default server fdsl.fortinet.com
D. From public FDNI server with highest index number only

Correct Answer: A
Section:

QUESTION 31
View the following exhibit.
Given the configurations shown in the exhibit, what can you conclude from the installation targets in the Install On column?

A. The Install On column value represents successful installation on the managed devices
B. Policy seq#3 will be installed on all managed devices and VDOMs that are listed under Installation Targets
C. Policy seq#3 will be installed on the Trainer[NAT] VDOM only
D. Policy seq#3 will be not installed on any managed device

Correct Answer: B
Section:

QUESTION 32
View the following exhibit.

An administrator is importing a new device to FortiManager and has selected the shown options. What will happen if the administrator makes the
changes and installs the modified policy package on this managed FortiGate?

A. The unused objects that are not tied to the firewall policies will be installed on FortiGate
B. The unused objects that are not tied to the firewall policies will remain as read-only locally on FortiGate
C. The unused objects that are not tied to the firewall policies locally on FortiGate will be deleted
D. The unused objects that are not tied to the firewall policies in policy package will be deleted from the FortiManager database

Correct Answer: C
Section:

QUESTION 33
View the following exhibit, which shows the Download Import Report:

Why it is failing to import firewall policy ID 2?

A. The address object used in policy ID 2 already exist in ADON database with any as interface association and conflicts with address object interface
association locally on the FortiGate
B. Policy ID 2 is configured from interface any to port6 FortiManager rejects to import this policy because any interface does not exist on FortiManager
C. Policy ID 2 does not have ADOM Interface mapping configured on FortiManager
D. Policy ID 2 for this managed FortiGate already exists on FortiManager in policy package named Remote-FortiGate.

Correct Answer: A
Section:
Explanation:
FortiManager_6.4_Study_Guide-Online -- page 331 & 332

QUESTION 34
View the following exhibit:
Which two statements are true if the script is executed using the Remote FortiGate Directly (via CLI) option? (Choose two.)

A. You must install these changes using Install Wizard

B. FortiGate will auto-update the FortiManager's device-level database.
C. FortiManager will create a new revision history.
D. FortiManager provides a preview of CLI commands before executing this script on a managed FortiGate.

Correct Answer: B, C
Section:

QUESTION 35
Refer to the exhibit.

Which two statements about the output are true? (Choose two.)

A. The latest revision history for the managed FortiGate does match with the FortiGate running configuration
B. Configuration changes have been installed to FortiGate and represents FortiGate configuration has been changed
C. The latest history for the managed FortiGate does not match with the device-level database
D. Configuration changes directly made on the FortiGate have been automatically updated to device-level database

Correct Answer: A, C
Section:
Explanation:
STATUS: dev-db: modified; conf: in sync; cond: pending; dm: retrieved; conn: up -- dev-db: modified -- This is the device setting status which indicates
that configuration changes were made on FortiManager. -- conf: in sync -- This is the sync status which shows that the latest revision history is in sync
with Fortigate's configuration. -- cond: pending -- This is the configuration status which says that configuration changes need to be installed.
Most probably a retrieve was done in the past (dm: retrieved) updating the revision history DB (conf: in sync) and FortiManager device level DB, now
there is a new modification on FortiManager device level DB (dev-db: modified) which wasn't installed to FortiGate (cond: pending), hence; revision
history DB is not aware of that modification and doesn't match device DB.
Conclusion: -- Revision DB does match FortiGate. -- No changes were installed to FortiGate yet. -- Device DB doesn't match Revision DB. -- No changes
were done on FortiGate (auto-update) but configuration was retrieved instead
After an Auto-Update or Retrieve: device database = latest revision = FGT
Then after a manual change on FMG end (but no install yet): latest revision = FGT (still) but now device database has been modified (is different).
After reverting to a previous revision in revision history: device database = reverted revision != FGT
Topic 2, Main Questions Pool B

QUESTION 36
Which two statements regarding device management on FortiManager are true? (Choose two.)

A. FortiGate devices in HA cluster devices are counted as a single device.

B. FortiGate in transparent mode configurations are not counted toward the device count on FortiManager.
C. FortiGate devices in an HA cluster that has five VDOMs are counted as five separate devices.
D. The maximum number of managed devices for each ADOM is 500.

Correct Answer: A, C
Section:

QUESTION 37
Which two statements about Security Fabric integration with FortiManager are true? (Choose two.)

A. The Security Fabric license, group name and password are required for the FortiManager Security Fabric integration
B. The Fabric View module enables you to generate the Security Fabric ratings for Security Fabric devices
C. The Security Fabric settings are part of the device level settings
D. The Fabric View module enables you to view the Security Fabric ratings for Security Fabric devices

Correct Answer: C, D
Section:

QUESTION 38
Refer to the exhibit.
Which two statements are true if the script is executed using the Device Database option? (Choose two.)

A. You must install these changes using the Install Wizard to a managed device
B. The successful execution of a script on the Device Database will create a new revision history
C. The script history will show successful installation of the script on the remote FortiGate
D. The Device Settings Status will be tagged as Modified

Correct Answer: A, D
Section:

QUESTION 39
Refer to the exhibit.

An administrator logs into the FortiManager GUI and sees the panes shown in the exhibit.
Which two reasons can explain why the FortiAnalyzer feature panes do not appear? (Choose two.)

A. The administrator logged in using the unsecure protocol HTTP, so the view is restricted.
B. The administrator profile does not have full access privileges like the Super_User profile.
C. The administrator IP address is not a part of the trusted hosts configured on FortiManager interfaces.
D. FortiAnalyzer features are not enabled on FortiManager.

Correct Answer: B, D
Section:
QUESTION 40
Which two items are included in the FortiManager backup? (Choose two.)

A. FortiGuard database
B. Global database
C. Logs
D. All devices

Correct Answer: B, D
Section:

QUESTION 41
An administrator's PC crashes before the administrator can submit a workflow session for approval. After the PC is restarted, the administrator notices
that the ADOM was locked from the session before the crash.
How can the administrator unlock the ADOM?

A. Restore the configuration from a previous backup.

B. Log in as Super_User in order to unlock the ADOM.
C. Log in using the same administrator account to unlock the ADOM.
D. Delete the previous admin session manually through the FortiManager GUI or CLI.

Correct Answer: D
Section:

QUESTION 42
Refer to the exhibit.

Given the configuration shown in the exhibit, which two statements are true? (Choose two.)
A. It allows two or more administrators to make configuration changes at the same time, in the same ADOM.
B. It disables concurrent read-write access to an ADOM.
C. It allows the same administrator to lock more than one ADOM at the same time.
D. It is used to validate administrator login attempts through external servers.

Correct Answer: B, C
Section:

QUESTION 43
Refer to the exhibit.
Which two statements about an ADOM set in Normal mode on FortiManager are true? (Choose two.)

A. It supports the FortiManager script feature

B. It allows making configuration changes for managed devices on FortiManager panes
C. FortiManager automatically installs the configuration difference in revisions on the managed FortiGate
D. You cannot assign the same ADOM to multiple administrators

Correct Answer: A, B
Section:
Explanation:
'FortiGate units in the ADOM will query their own configuration every 5 seconds. If there has been a configuration change, the FortiGate unit will send a
diff revision on the change to the FortiManager using the FGFM protocol.'

QUESTION 44
Refer to the exhibit.

A junior administrator is troubleshooting a FortiManager connectivity issue that rs occurring with managed FortiGate devices
Given the FortiManager device manager settings shown in the exhibit what can you conclude from the exhibit?

A. The administrator had restored the FortiManager configuration file

B. The administrator must refresh both devices to restore connectivity
C. FortiManager test internet connectivity therefore, both devices appear to be down
D. The administrator can reclaim the FGFM tunnel to get both devices online

Correct Answer: C
Section:
QUESTION 45
View the following exhibit.

Which one of the following statements is true regarding the object named ALL?

A. FortiManager updated the object ALL using FortiGate's value in its database
B. FortiManager updated the object ALL using FortiManager's value in its database
C. FortiManager created the object ALL as a unique entity in its database, which can be only used by this managed FortiGate.
D. FortiManager installed the object ALL with the updated value.

Correct Answer: A
Section:

QUESTION 46
What is the advantage of using FortiManager to manage PortiAnalyzer?

A. It allows FortiManager to manage all FortiGate devices

B. It allows FortiManager to fun reports based on FortiAnalyzer
C. It allows FortiManager to store all managed FortiGate device logs
D. It allows FortiManager to act as a collector and FortiAnalyzer device

Correct Answer: D
Section:
QUESTION 47
Refer to the exhibit.

An administrator is about to add the FortiGate device to FortiManager using the discovery process FortiManager is operating behind a NAT device, and
the administrator configured the FortiManager NATed IP address under the FortiManager system administration settings
What is the expected result?

A. During discovery FortiManager sets trie FortiManager NATed IP address on FortiGate

B. During discovery FortiManager sets both tie FortiManager NATed IP address and NAT device IP address on FortiGate
C. During discovery FortiManager sets the NATed device IP address on FortiGate
D. During discovery FortiManager uses only the FortiGate serial number to establish the connection

Correct Answer: C
Section:

QUESTION 48
Refer to the exhibit.
Given the configuration shown in the exhibit, what can you conclude from the installation targets m the Install On column? (Choose two)

A. Policy seq # 2 will not be installed on the Local-FortiGate root VDOM because there is no root VDOM in the Installation Target
B. Policy seq # 3 will be installed on all managed devices and VDOMs that are listed under Installation Targets
C. Policy seq # 1 will be installed on the Remoto-FortiGate root[NAT] and Student[NAT] VDOMs only
D. Policy 3 will be installed on all FortiGate devices and vdom belongs to the ADOM
E. Policy seq # 3 will be skipped because no installation targets are specified

Correct Answer: B, C
Section:

QUESTION 49
An administrator is replacing a device on FortiManager by running the following command:
execute device replace sn <devname> <serialnum>.
What device name and serial number must the administrator use?

A. Device name and serial number of the original device.

B. Device name and serial number of the replacement device.
C. Device name of the replacement device and serial number of the original device.
D. Device name of the original device and serial number of the replacement device.

Correct Answer: D
Section:

QUESTION 50
Refer to the exhibit.

An administrator has configured the command shown in the exhibit on FortiManager. A configuration change has been installed from FortiManager to
the managed FortiGate that causes the FGFM tunnel to go down for more than 15 minutes.
What is the purpose of this command?

A. It allows FortiGate to unset central management settings.

B. It allows FortiGate to reboot and recover the previous configuration from its configuration file.
C. It allows the FortiManager to revert and install a previous configuration revision on the managed FortiGate.
D. It allows FortiGate to reboot and restore a previously working firmware image.

Correct Answer: B
Section:

QUESTION 51
What is the purpose of ADOM revisions?

A. To create System Checkpoints for the FortiManager configuration.

B. To save the current state of the whole ADOM.
C. To save the current state of all policy packages and objects for an ADOM.
D. To revert individual policy packages and device-level settings for a managed FortiGate by reverting to a specific ADOM revision

Correct Answer: C
Section:
Explanation:
Fortimanager 6.4 Study guide page 198

QUESTION 52
An administrator has assigned a global policy package to custom ADOM1. Then the administrator creates a new policy package, Fortinet, in the custom
ADOM1.
Which statement about the global policy package assignment to the newly-created policy package Fortinet is true?

A. When a new policy package is created, it automatically assigns the global policies to the new package.
B. When a new policy package is created, you need to assign the global policy package from the global ADOM.
C. When a new policy package is created, you need to reapply the global policy package to the ADOM.
D. When a new policy package is created, you can select the option to assign the global policies to the new package.

Correct Answer: A
Section:
Explanation:
Global Policy Package is applied at the ADOM level and you have the option to choose which ADOM policy packages you want to exclude (there is no
option to choose Policy Packages to include).

QUESTION 53
What will be the result of reverting to a previous revision version in the revision history?

A. It will install configuration changes to managed device automatically

B. It will tag the device settings status as Auto-Update
C. It will generate a new version ID and remove all other revision history versions
D. It will modify the device-level database

Correct Answer: D
Section:

QUESTION 54
An administrator has assigned a global policy package to custom ADOM1. Then the administrator creates a new policy package Fortinet in the custom
ADOM1. What will happen to the Fortinet policy package when it is created?

A. You need to assign the global policy package from the global ADOM
B. You need to reapply the global poky package to the ADOM
C. it automatically assigns the global policies
D. You can select the option to assign the global polices

Correct Answer: C
Section:

QUESTION 55
An administrator created a header and footer global policy package and assigned it to an ADOM.
What are two outcomes from this action? (Choose two.)

A. You must manually move the header and footer policies after the policy assignment.
B. After you assign the global policy package to an ADOM, the policy package is hidden from the ADOM and cannot be viewed.
C. If you assign an additional global policy package to the same ADOM, FortiManaqer removes previously assigned policies.
D. You can edit or delete all the global objects in the global ADOM.

Correct Answer: A, D
Section:

QUESTION 56
An administrator is replacing a failed device on FortiManager by running the following command:
execute device replace sn <devname> <serialnum>.
Which device name and serial number must the administrator use?

A. The device name of the new device and serial number of the failed device
B. The device name and serial number of the failed device
C. The device name of the failed device and serial number of the new device
D. The device name and serial number of the new device

Correct Answer: C
Section:

QUESTION 57
Refer to the exhibit.
How will FortiManager try to get updates for antivirus and IPS?

A. From the list of configured override servers or public FDN servers

B. From the default server fds1.fortinet.com
C. From the configured override server IP address 10.0.1.50 only
D. From public FDNI server IP address with the fourth highest octet only

Correct Answer: A
Section:

QUESTION 58
Refer to the exhibit.
On FortiManager, an administrator created a new system template named Training with two new DNS addresses. During the installation preview stage,
the administrator notices that central-management settings need to be purged.
What can be the main reason for the central-management purge command?

A. The Remote-FortiGate device does not have any DNS server-list configured in the central-management settings.
B. The DNS addresses in the default system settings are the same as the Training system template.
C. The ADOM is locked by another administrator.
D. The Training system template has a default FortiGuard widget.

Correct Answer: A
Section:

QUESTION 59
What does a policy package status of Conflict indicate?

A. The policy package reports inconsistencies and conflicts during a Policy Consistency Check.
B. The policy package does not have a FortiGate as the installation target.
C. The policy package configuration has been changed on both FortiManager and the managed device independently.
D. The policy configuration has never been imported after a device was registered on FortiManager.

Correct Answer: C
Section:

QUESTION 60
An administrator would like to create an SD-WAN default static route for a newly created SD-WAN using the FortiManager GUI. Both port1 and port2 are
part of the SD-WAN member interfaces.
Which interface must the administrator select in the static route device drop-down list?

A. port2
B. virtual-wan-link
C. port1
D. auto-discovery

Correct Answer: B
Section:

QUESTION 61
Which two items does an FGFM keepalive message include? (Choose two.)

A. FortiGate uptime
B. FortiGate license information
C. FortiGate IPS version
D. FortiGate configuration checksum

Correct Answer: C, D
Section:

QUESTION 62
Which configuration setting for FortiGate is part of a device-level database on FortiManager?

A. VIP and IP Pools

B. Firewall policies
C. Security profiles
D. Routing

Correct Answer: C
Section:
Explanation:
The FortiManager stores the FortiGate configuration details in two distinct databases. The device-level database includes configuration details related to
device-level settings, such as interfaces, DNS, routing, and more. The ADOM-level database includes configuration details related to firewall policies,
objects, and security profiles.

QUESTION 63
An administrator has assigned a global policy package to a new ADOM called ADOM1. What will happen if the administrator tries to create a new policy
package in ADOM1?

A. When creating a new policy package, the administrator can select the option to assign the global policy package to the new policy package
B. When a new policy package is created, the administrator needs to reapply the global policy package to ADOM1.
C. When a new policy package is created, the administrator must assign the global policy package from the global ADOM.
D. When the new policy package is created, FortiManager automatically assigns the global policy package to the new policy package.

Correct Answer: A
Section:

QUESTION 64
What is the purpose of the Policy Check feature on FortiManager?

A. To find and provide recommendation to combine multiple separate policy packages into one common policy package
B. To find and merge duplicate policies in the policy package
C. To find and provide recommendation for optimizing policies in a policy package
D. To find and delete disabled firewall policies in the policy package

Correct Answer: C
Section:

QUESTION 65
Which two conditions trigger FortiManager to create a new revision history? (Choose two.)

A. When configuration revision is reverted to previous revision in the revision history

B. When FortiManager installs device-level changes to a managed device
C. When FortiManager is auto-updated with configuration changes made directly on a managed device
D. When changes to device-level database is made on FortiManager

Correct Answer: B, C
Section:

QUESTION 66
Which of the following statements are true regarding VPN Manager? (Choose three.)

A. VPN Manager must be enabled on a per ADOM basis.

B. VPN Manager automatically adds newly-registered devices to a VPN community.
C. VPN Manager can install common IPsec VPN settings on multiple FortiGate devices at the same time.
D. Common IPsec settings need to be configured only once in a VPN Community for all managed gateways.
E. VPN Manager automatically creates all the necessary firewall policies for traffic to be tunneled by IPsec.

Correct Answer: A, C, D
Section:

QUESTION 67
An administrator would like to authorize a newly-installed AP using AP Manager. What steps does the administrator need to perform to authorize an AP?

A. Authorize the new AP using AP Manager and wait until the change is updated on the FortiAP. Changes to the AP's state do not require installation.
B. Changes to the AP's state must be performed directly on the managed FortiGate.
C. Authorize the new AP using AP Manager and install the policy package changes on the managed FortiGate.
D. Authorize the new AP using AP Manager and install the device level settings on the managed FortiGate.

Correct Answer: D
Section:

QUESTION 68
View the following exhibit.
Which of the following statements are true based on this configuration setting? (Choose two.)

A. This setting will enable the ADOMs feature on FortiManager.

B. This setting is applied globally to all ADOMs.
C. This setting will allow assigning different VDOMs from the same FortiGate to different ADOMs.
D. This setting will allow automatic updates to the policy package configuration for a managed device.

Correct Answer: B, C
Section:

QUESTION 69
View the following exhibit:
An administrator used the value shown in the exhibit when importing a Local-FortiGate into FortiManager. What name will be used to display the
firewall policy for port1?

A. port1 on FortiGate and WAN on FortiManager

B. port1 on both FortiGate and FortiManager
C. WAN zone on FortiGate and WAN zone on FortiManager
D. WAN zone on FortiGate and WAN interface on FortiManager

Correct Answer: A
Section:

QUESTION 70
Which of the following statements are true regarding reverting to previous revision version from the revision history? (Choose two.)

A. To push these changes to a managed device, it required an install operation to the managed FortiGate.
B. Reverting to a previous revision history will generate a new version ID and remove all other history
C. Reverting to a previous revision history will tag the device settings status as Auto-Update.
D. It will modify device-level database

Correct Answer: A, D
Section:

QUESTION 71
Which of the following statements are true regarding VPN Gateway configuration in VPN Manager? (Choose two.)

A. Managed gateways are devices managed by FortiManager in the same ADOM

B. External gateways are third-party VPN gateway devices only
C. Protected subnets are the subnets behind the device that you don't want to allow access to over the IPsec VPN
D. Managed devices in other ADOMs must be treated as external gateways

Correct Answer: A, D
Section:

QUESTION 72
Refer to the exhibit.
Given the configuration shown in the exhibit, how did FortiManager handle the service category named General?

A. FortiManager ignored the firewall service category General but created a new service category in its database.
B. FortiManager ignored the firewall service category general and deleted the duplicate value In Its database
C. FortiManager ignored the firewall service category General and updated the FortiGate duplicate value in the FortiGate database.
D. FortiManager ignored the firewall service category General and did not update Its database with the value

Correct Answer: D
Section:

QUESTION 73
Which configuration setting for FortiGate is part of an ADOM-level database on FortiManager?

A. NSX-T Service Template

B. Security profiles
C. SNMP
D. Routing
Correct Answer: B
Section:

QUESTION 74
What will happen if FortiAnalyzer features are enabled on FortiManager?

A. FortiManager will keep all the logs and reports on the FortiManager.
B. FortiManager will enable ADOMs to collect logs automatically from non-FortiGate devices.
C. FortiManager will install the logging configuration to the managed devices
D. FortiManager can be used only as a logging device.

Correct Answer: C
Section:

QUESTION 75
Which two settings are required for FortiManager Management Extension Applications (MEA)? (Choose two.)

A. When you configure MEA, you must open TCP or UDP port 540.
B. You must open the ports to the Fortinet registry
C. You must create a MEA special policy on FortiManager using the super user profile
D. The administrator must have the super user profile.

Correct Answer: C, D
Section:

QUESTION 76
In addition to the default ADOMs, an administrator has created a new ADOM named Training for FortiGate devices. The administrator authorized the
FortiGate device on FortiManager using the Fortinet Security Fabric.
Given the administrator's actions, which statement correctly describes the expected result?

A. The FortiManager administrator must add the authorized device to the Training ADOM using the Add Device wizard only.
B. The authorized FortiGate will be automatically added to the Training ADOM.
C. The authorized FortiGate will appear in the root ADOM.
D. The authorized FortiGate can be added to the Training ADOM using FortiGate Fabric Connectors.

Correct Answer: C
Section:

QUESTION 77
An administrator is in the process of moving the system template profile between ADOMs by running the following command:
execute improfile import-profile ADOM2 3547 /tmp/myfile
Where does the administrator import the file from?

A. File system
B. ADOM1
C. ADOM2 object database
D. ADOM2

Correct Answer: A
Section:

QUESTION 78
Which two conditions trigger FortiManager to create a new revision history? (Choose two.)

A. When FortiManager is auto-updated with configuration changes made directly on a managed device
B. When changes to the device-level database are made on FortiManager
C. When FortiManager installs device-level changes on a managed device
D. When a configuration revision is reverted to a previous revision in the revision history

Correct Answer: B, C
Section:
QUESTION 79
Refer to the exhibit.

An administrator would like to create three ADOMs on FortiManager with different access levels based on departments.
What two conclusions can you draw from the design shown in the exhibit? (Choose two.)

A. Admin A can access VDOM2 and VDOM3 with the super user profile.
B. The FortiManager policies and objects database can be shared between the Financial and HR ADOMs.
C. The administrator must set the FortiManager ADOM mode to Advanced.
D. The administrator must configure FortiManager in workspace mode.

Correct Answer: B, C
Section:

QUESTION 80
An administrator configures a new firewall policy on FortiManager and has not yet pushed the changes to the managed FortiGate.
In which database will the configuration be saved?

A. Device-level database
B. Revision history database
C. ADOM-level database
D. Configuration-level database

Correct Answer: C
Section:
Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=FD47942

QUESTION 81
Refer to the exhibit.
An administrator has created a firewall address object, Training which is used in the Local-FortiGate policy package.
When the installation operation is performed, which IP/Netmask will be installed on the Local-FortiGate, for the Training firewall address object?

A. 192.168.0.1/24
B. 10.200.1.0/24
C. It will create a firewall address group on Local-FortiGate with 192.168.0.1/24 and 10.0.1.0/24 object values.
D. Local-FortiGate will automatically choose an IP/Netmask based on its network interface settings.

Correct Answer: A
Section:

QUESTION 82
Refer to the exhibit.
According to the error message why is FortiManager failing to add the FortiAnalyzer device?

A. The administrator must turn off the Use Legacy Device login and add the FortiAnalyzer device to the same network as Forti-Manager
B. The administrator must select the Forti-Manager administrative access checkbox on the FortiAnalyzer management interface
C. The administrator must use the Add Model Device section and discover the FortiAnalyzer device
D. The administrator must use the correct user name and password of the FortiAnalyzer device

Correct Answer: A
Section:

QUESTION 83
Push updates are failing on a FortiGate device that is located behind a NAT device Which two settings should the administrator check? (Choose two.)

A. That the virtual IP address and correct ports are set on the NAT device
B. That the NAT device IP address and correct ports are configured on FortiManager
C. That the external IP address on the NAT device is set to DHCP and configured with the virtual IP
D. That the override server IP address is set on FortiManager and the NAT device

Correct Answer: B, C
Section:

QUESTION 84
Refer to the exhibit.

You ate using the Quick install option to install configuration changes on the managed FortiGate
Which two statements correctly describe the result? (Choose two)
A. It installs device-level changes on the FortiGate device without launching the Install Wizard
B. It installs all the changes in the device database first and the administrator must reinstall the changes on the FodiGate device
C. It provides the option to preview only the policy package changes before installing them
D. It install provisioning template changes on the FortiGate device

Correct Answer: A, D
Section:

QUESTION 85
Refer to the exhibit.
Which statement is true about the FortiManager ADOM policy tab based on the API request?

A. The API command has enabled both central NAT and interface policy on the policy tab.
B. The API command has requested the policy tab permissions information only.
C. The API command has failed when requesting policy tab permissions information.
D. The API command has applied to customer with ID: 200.

Correct Answer: A
Section:

QUESTION 86
In the event that one of the secondary FortiManager devices fails, which action must be performed to return the FortiManager HA manual mode to a
working state?

A. The FortiManaqer HA state transition is transparent to administrators and does not require any reconfiguration.
B. Manually promote one of the working secondary devices to the primary role, and reboot the old primary device to remove the peer IP of the failed
device.
C. Reconfigure the primary device to remove the peer IP of the failed device.
D. Reboot the failed device to remove its IP from the primary device.

Correct Answer: C
Section:

QUESTION 87
Which three settings are the factory default settings on FortiManager? (Choose three.)

A. The administrative domain is disabled.

B. The Port1 interface IP address is 192.168.1.99/24.
C. Management Extension applications are enabled.
D. The FortiManager setup wizard is disabled.
E. FortiAnalvzer features are disabled.
Correct Answer: A, B, E
Section:

QUESTION 88
An administrator has enabled Service Access on FortiManager.
What is the purpose of Service Access on the FortiManager interface?

A. Allows FortiManager to download IPS packages

B. Allows FortiManager to respond to request for FortiGuard services from FortiGate devices
C. Allows FortiManager to run real-time debugs on the managed devices
D. Allows FortiManager to automatically configure a default route

Correct Answer: B
Section:
Explanation:
FortiManager 6.2 Study guide page 350
Topic 3, Main Questions Pool C

QUESTION 89
What does the diagnose dvm check-integrity command do? (Choose two.)

A. Internally upgrades existing ADOMs to the same ADON version in order to clean up and correct the ADOM syntax
B. Verifies and corrects unregistered, registered, and deleted device states
C. Verifies and corrects database schemas in all object tables
D. Verifies and corrects duplicate VDOM entries

Correct Answer: B, D
Section:
Explanation:
6.2 Study Guide page 305 verify and correct parts of the device manager databases, including: -- inconsistent device-to-group and group-to-ADOM
memberships -- unregistered, registered, and deleted device states -- device lock statuses -- duplicate VDOM entries