Signal strength: 1.3.6.1.4.1.41112.1.4.5.1.5.
1
Frequency: 1.3.6.1.4.1.41112.1.4.1.1.4.1
SSID: 1.3.6.1.4.1.41112.1.4.5.1.2.1
Uptime: 1.3.6.1.2.1.1.3.0
Free memory: 1.3.6.1.4.1.10002.1.1.1.1.2.0
Total Memory: 1.3.6.1.4.1.10002.1.1.1.1.1.0
MAC address of the access point to which the device is connected:
1.3.6.1.4.1.41112.1.4.5.1.4.1
The IP address of the access point to which the device is connected:
1.3.6.1.4.1.41112.1.4.7.1.10.1.4.24.214.232.12.159
Antenna type: 1.3.6.1.4.1.41112.1.4.1.1.9.1
The next MIBs can read incoming and outgoing traffic (I have LAN eth0 under index
4, WLAN ath0 under 10), for example for LAN traffic:
1
2
ifInOctets.4
ifOutOctets.4
Average CPU usage per 1min / 5min / 15min:
1
2
3
1.3.6.1.4.1.10002.1.1.1.4.2.1.3.1
1.3.6.1.4.1.10002.1.1.1.4.2.1.3.2
1.3.6.1.4.1.10002.1.1.1.4.2.1.3.3
TX and RX AP in kilobytes can be found by the following OID:
1
2
1.3.6.1.4.1.41112.1.4.7.1.17.1.4.24.214
1.3.6.1.4.1.41112.1.4.7.1.18.1.4.24.214
OID noise can be found by:
1
1.3.6.1.4.1.41112.1.4.7.1.4.1.4.24.214