0101010101010101010101 0101010101010101010101

0101010101010101010101 0101010101010101010101
0101010101010101010101 0101010101010101010101
0101010101010101010101 0101010101010101010101
0101010101010101010101 0101010101010101010101
0101010101010101010101 0101010101010101010101
0101010101010101010101 0101010101010101010101
0101010101010101010101 0101010101010101010101
0101010101010101010101 0101010101010101010101
0101010101010101010101
0101010101010101010101 Digital Oscilloscope
0101010101010101010101
0101010101010101010101 Waveform Generator
0101010101010101010101 RF0101010101010101010101
Signal Generator Product Selection Guide
0101010101010101010101
0101010101010101010101 Spectrum Analyzer
0101010101010101010101 Network Analyzer Every Bench.
Vector0101010101010101010101
0101010101010101010101 DC Power Supply Every Engineer.
0101010101010101010101
0101010101010101010101 DC0101010101010101010101
Electronic Load Every Day.
Digital Multimeter
Probes & Accessories

SIGLENT TECHNOLOGIES CO., LTD

 Super Phosphor Oscilloscope

SDS7000A Series SDS6000A Series

SDS7804AP / SDS7804A H12 (8 GHz)

SDS6204A (2 GHz)
SDS7604AP / SDS7604A H12 (6 GHz)
SDS6104A (1 GHz)
SDS7404A H12 (4 GHz)
SDS6054A (500 MHz)
SDS7304A H12 (3 GHz)
Features and Benefits:
Features and Benefits:
• 4 analog channels, up to 8 GHz bandwidth with up to 20 GSa/s sample rate • 4 analog channels, up to 2 GHz bandwidth with 5 GSa/s (10 GSa/s ESR)
• 12-bit ADC sample rate at each channel
• Low background noise: 300 μVrms @ 8 GHz bandwidth, 220 μVrms @ 4 GHz • Low background noise, supports 0.5 mV/div to 10 V/div vertical scales
bandwidth • SPO technology
• SPO technology • Waveform capture rates up to 170,000 wfm/s (normal mode), and 750,000
• Waveform capture rates up to 1,000,000 wfm/s wfm/s (sequence mode)
• Supports 256-level intensity grading and color temperature display modes • Supports 256-level intensity grading and color temperature display modes
• Up to 2 Gpts/ch waveform length (optional, AP models) • 500 Mpts Record length in total for all 4 channels
• Digital trigger system • Digital trigger system
• Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout, • Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout,
Pattern, Qualified, Nth edge, Setup/hold, Delay and Video (HDTV supported). Pattern, Qualified, Nth edge, Setup/hold, Delay and Video (HDTV supported).
Zone Trigger simplifies advanced triggering Zone Trigger simplifies advanced triggering
• Serial bus triggering and decoder, supports protocols I2C, SPI, UART, CAN, • Serial bus triggering and decoder, supports protocols I2C, SPI, UART, CAN,
LIN, CAN FD, CAN XL, FlexRay, I2S, MIL-STD-1553B, SENT, Manchester, LIN, CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT and Manchester
ARINC429 and USB 2.0 • Segmented acquisition (Sequence) mode, dividing the maximum record
• Segmented acquisition (Sequence) mode, dividing the maximum record length into multiple segments (up to 80,000), according to trigger conditions
length into multiple segments (up to 124,000), according to trigger conditions set by the user, with a very small dead time between segments to capture the
set by the user, with a very small dead time between segments to capture the qualifying event
qualifying event • History waveform record (History) function, the maximum recorded waveform
• History waveform record (History) function, the maximum recorded waveform length is 80,000 frames
length is 124,000 frames • Automatic measurements on 50+ parameters, supports statistics with
• Automatic measurements on 60+ parameters, supports statistics with histogram, track, trend, Gating measurement, and measurements on Math,
histogram, track, trend, Gating measurement, and measurements on Math, History and Ref
History and Memory traces • 4 Math traces (8 Mpts FFT, addition, subtraction, multiplication, division,
• 4 Math traces (32 Mpts FFT, Filter, addition, subtraction, multiplication, integration, differential, square root, etc.), supports formula editor
division, integration, differential, square root, etc.), supports formula editor • Abundant data analysis functions such as Search, Navigate, Digital Voltmeter,
• Abundant data analysis functions such as Search, Navigate, SignalScan, Counter, Waveform Histogram, Bode plot, Power Analysis and Eye/Jitter
Digital Voltmeter, Counter, Waveform Histogram, Bode plot, Power Analysis, Analysis
Eye/Jitter Analysis and Compliance Test • High Speed hardware-based Average, Hi-Res; High Speed hardware-based
• Spectrum Analyzer mode (A models only) Mask Test function, with Mask Editor tool for creating user-defined masks
• High Speed hardware-based Average, ERES; High Speed hardware-based • 16 digital channels (optional)
Mask Test function, with Mask Editor tool for creating user-defined masks • 25 MHz function / arbitrary waveform generator, built-in multiple predefined
• 16 digital channels waveforms
• Built-in 50 MHz waveform generator • Large 12.1” TFT-LCD display with 1280 * 800 resolution; Capacitive touch
• Large 15.6” HD TFT-LCD display with 1920 * 1080 resolution; Capacitive screen supports multi-touch gestures
touch screen supports multi-touch gestures • Interfaces include: USB Hosts, USB Device (USBTMC), LAN (VXI-11/Telnet/
• Interfaces include: 4x USB Host 3.1 Gen 1, 2x USB 3.0 Host, USB 2.0 Device, Socket), micro SD card, Pass/Fail, Trigger Out, HDMI
2x 1000M LAN, DVI-D, DP 1.2, HDMI 1.4, Audio, External Triger In, Aux Out • Built-in web server supports remote control over the LAN port using a web
(Pass/Fail, Trigger Out), 10 MHz In, 10 MHz Out browser. Supports SCPI remote control commands. Supports external mouse
• Built-in web server supports remote control over the LAN port using a web and keyboard
browser. Supports SCPI remote control commands. Supports external mouse
and keyboard
www.siglent.com 1
 Super Phosphor Oscilloscope

SDS6000L Series

SDS6208L / SDS6204L (2 GHz) SDS5000X HD & SDS5000L Series

SDS6108L / SDS6104L (1 GHz)
SDS6058L / SDS6054L (500 MHz) SDS5108X HD / SDS5108L (1 GHz)
SDS5106X HD / SDS5104X HD (1 GHz)
Features and Benefits:
SDS5058X HD / SDS5058L (500 MHz)
• 8/4 analog channels + 1 external trigger. Designed for expansion. Combine
multiple units for a high-speed acquisition system with up to 512 channels.
SDS5056X HD / SDS5054X HD (500 MHz)
• Up to 2 GHz bandwidth with 5 GSa/s (10 GSa/s ESR) sample rate at each SDS5038X HD / SDS5038L (350 MHz)
channel SDS5036X HD / SDS5034X HD (350 MHz)
• Low background noise, supports 0.5 mV/div to 10 V/div vertical scales
• SPO technology Features and Benefits:
• Waveform capture rates up to 170,000 wfm/s (normal mode), and • 8/6/4 analog channels for SDS5000X HD and 8 channels for SDS5000L
750,000 wfm/s (sequence mode) • Up to 1 GHz bandwidth with up to 5 GSa/s sample rate
• Supports 256-level intensity grading and color temperature display modes • 12-bit ADC
• 500 Mpts Record length in total for all 4 channels • Low noise floor: 140 μVrms @ 1 GHz bandwidth (typical)
• Digital trigger system • SPO technology
• Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout, • Waveform capture rates up to 160,000 wfm/s in normal mode and 650,000
Pattern, Qualified, Nth edge, Setup / hold, Delay and Video (HDTV wfm/s in sequence mode
supported). Zone Trigger simplifies advanced triggering • Supports 256-level intensity grading and color temperature display modes
• Serial bus triggering and decoder, supports protocols I2C, SPI, UART, CAN, • Up to 2.5 Gpts/ch waveform length
LIN, CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT and Manchester • Digital trigger system
• Segmented acquisition (Sequence) mode, dividing the maximum record • Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout,
length into multiple segments (up to 80,000), according to trigger conditions Pattern, Qualified, Nth edge, Setup/hold, Delay and Video (HDTV supported).
set by the user, with a very small dead time between segments to capture the Zone Trigger simplifies advanced triggering
qualifying event • Serial bus triggering and decoder, supports protocols including I2C, SPI,
• History waveform record (History) function, the maximum recorded waveform UART, CAN, LIN, CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT, Manchester
length is 80,000 frames and ARINC429
• Automatic measurements on 50+ parameters, supports statistics with • Segmented acquisition (Sequence) mode, dividing the maximum record
histogram, track, trend, Gating measurement, and measurements on Math, length into multiple segments (up to 170,000), according to trigger conditions
History, Memory and Ref set by the user, with a very small dead time between segments to capture the
• 4 Math traces (8 Mpts FFT, addition, subtraction, multiplication, division, qualifying event
integration, differential, square root, etc.), supports formula editor • 8 Math traces (8 Mpts FFT, Filter, addition, subtraction, multiplication, division,
• Abundant data analysis functions such as Search, Navigate, Digital Voltmeter, integration, differential, square root, etc.), supports formula editor
Counter, Waveform Histogram, Power Analysis and Eye/Jitter Analysis • Abundant data analysis functions such as Search, Navigate, Digital Voltmeter,
• 16 digital channels (optional) Counter, Waveform Histogram, Bode plot, Power Analysis and Double Pulse
• 25 MHz function / arbitrary waveform generator, built-in multiple predefined Test
waveforms • High Speed hardware-based Average, Hi-Res; High Speed hardware-based
• Interfaces include: 4x USB Hosts, USB Device (USBTMC), 1000M LAN (VXI- Mask Test function, with Mask Editor tool for creating user-defined masks
11/ Telnet/ Socket), micro SD card, Pass/Fail, Trigger Out, HDMI, 10MHz In, • 16 digital channels (only for SDS5000X HD)
10MHz Out • External 50 MHz waveform generator supported
• Built-in web server supports remote control over the LAN port using a web • Large 12.1” TFT-LCD display with 1280 * 800 resolution; Capacitive touch
browser. Supports SCPI remote control commands. Supports external mouse screen supports multi-touch gestures (only for SDS5000X HD)
and keyboard • Interfaces include: 2x USB Host 3.0 (1x for SDS5000L), USB 2.0 Host, USB 3.0
Device (USBTMC), 1000M LAN, HDMI, External Triger In, Aux Out (Pass/Fail,
Trigger Out), 10 MHz In, 10 MHz Out
• Built-in web server supports remote control over the LAN port using a web
browser. Support SCPI remote control commands. Support external mouse
and keyboard
www.siglent.com 2
 Super Phosphor Oscilloscope

SDS5000X Series SDS3000X HD Series

SDS5104X (1 GHz) SDS3104X HD (1 GHz)

SDS5054X (500 MHz) SDS3054X HD (500 MHz)
SDS5034X (350 MHz) SDS3034X HD (350 MHz)
Features and Benefits: Features and Benefits:
• 1 GHz, 500 MHz, 350 MHz models with real-time sample rate up to 5 GSa/s
• 4 analog channels, up to 1 GHz bandwidth with up to 4GSa/s sample rate
• SPO technology
• 12-bit ADC
• Waveform capture rates up to 110,000 wfm/s (normal mode), and 500,000
• Low background noise: 125 μVrms @ 1 GHz bandwidth
wfm/s (sequence mode)
• SPO technology
• Supports 256-level intensity grading and color temperature display modes
• Waveform capture rates up to 200,000 wfm/s in Normal mode and 890,000
• Record length up to 250 Mpts/ch, 500 Mpts in total for all 4 channels
wfm/s in Sequence mode
• Digital trigger system
• Supports 256-level intensity grading and color temperature display modes
• Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout,
• Up to 400 Mpts/ch record length
Pattern, Qualified, Nth edge, Setup/hold, Delay and Video (HDTV supported).
• Digital trigger system
Trigger zone helps to simplify advanced triggering
• Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout,
• Serial bus triggering and decoder, supports protocols I2C, SPI, UART, CAN,
Pattern, Qualified, Nth edge, Setup/hold, Delay and Video (HDTV supported).
LIN, CAN FD, FlexRay, I2S and MIL-STD-1553B, SENT and Manchester
Zone Trigger simplifies advanced triggering
• Low background noise, supports 0.5 mV/div to 10 V/div voltage scales
• Serial bus triggering and decoder, supports protocols I2C, SPI, UART, CAN,
• Segmented acquisition (Sequence) mode, dividing the maximum record
LIN, CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT, Manchester and ARINC429
length into multiple segments (up to 100,000), according to trigger conditions
• Segmented acquisition (Sequence) mode, dividing the maximum record
set by the user, with a very small dead time between segments to capture the
length into multiple segments (up to 80,000), according to trigger conditions
qualifying event
set by the user, with a very small dead time between segments to capture the
• History waveform record (History) function, the maximum recorded waveform
qualifying event
length is 100,000 frames
• History waveform record (History) function, the maximum recorded waveform
• Automatic measurement function on 50+ parameters, supports statistics
length is 80,000 frames
with histogram,trend, Gating measurement, Math measurement, History
• Automatic measurements on 50+ parameters, supports statistics with
measurement and Ref measurement
histogram, track, trend, Gating measurement, and measurements on Math,
• Math function (2 Mpts FFT, addition, subtraction, multiplication, division,
History and Memory traces
integration, differential, square root, etc.), supports formula editor
• 4 Math traces (4 Mpts FFT, Filter, addition, subtraction, multiplication, division,
Abundant data analysis functions such as Search, Navigate, Digital Voltmeter,
integration, differential, square root, etc.), supports formula editor
Counter, Waveform Histogram, Bode plot and Power Analysis
• Abundant data analysis functions such as Search, Navigate, Digital Voltmeter,
• High Speed hardware-based Average, ERES (Enhanced Resolution)
Counter, Waveform Histogram, Bode plot and Power Analysis
• High Speed hardware-based Mask Test function, with Mask Editor tool for
• High Speed hardware-based Average, ERES; High Speed hardware-based
creating user-defined masks
Mask Test function, with Mask Editor tool for creating user-defined masks
• 16 digital channels (optional) with sample rate up to 1.25 GSa/s, record
• 16 digital channels (optional)
length up to 62.5 Mpts
• External 50 MHz waveform generator (optional)
• 25 MHz function / arbitrary waveform generator, built-in multiple predefined
• Large 10.1” TFT-LCD display with 1024 * 600 resolution; Capacitive touch
waveforms
screen supports multi-touch gestures
• Large 10.1” TFT-LCD display with 1024 * 600 resolution; Capacitive touch
• Interfaces include: 2x USB 3.0 Host, 1x USB 2.0 Host , USB 3.0 Device
screen supports multi-touch gestures
(USBTMC), 1000M LAN ((VXI-11/Telnet/Socket/LXI)), External Triger In, Aux
• Supports external mouse and keyboard
Out (Pass/Fail, Trigger Out)
• 10 types of one-button shortcuts
• Built-in web server supports remote control over the LAN port using a web
• Multiple interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11, telnet,
browser. Supports SCPI remote control commands. Supports external mouse
socket, web), Pass/Fail, Trigger Out, 10 MHz In, 10 MHz Out, VGA output
and keyboard
• Built-in web server supports remote control by the LAN port using a web
browser
• Supports SCPI remote control commands
www.siglent.com 3
 Super Phosphor Oscilloscope

SDS2000X HD Series SDS2000X Plus Series

SDS2354X HD (350 MHz) SDS2354X Plus (350 MHz)

SDS2204X HD (200 MHz) SDS2204X Plus (200 MHz)
SDS2104X Plus / SDS2102X Plus (100 MHz)
Features and Benefits:
Features and Benefits:
• 12-bit High Resolution • 350 MHz, 200 MHz, 100 MHz models with real-time sample rate up to 2 GSa/s.
• 12-bit Analog-Digital Convertors with sample rate up to 2 GSa/s A 500 MHz bandwidth upgrade option is available for 350 MHz models.
• Front ends with 70 μVrms noise floor @ 500 MHz bandwidth and 0.5% DC • SPO technology
gain accuracy • Waveform capture rates up to 120,000 wfm/s (normal mode) and 500,000
• 4 analog channels, up to 350 MHz bandwidth (upgradable to 500 MHz) wfm/s (sequence mode)
• SPO technology • Supports 256-level intensity grading and color temperature display modes
• Waveform capture rate up to 100,000 wfm/s (normal mode), and • Record length up to 200 Mpts/ch, 400 Mpts in total for all 4 channels
500,000 wfm/s (sequence mode) • Digital trigger system
• Supports 256-level intensity grading and color temperature display modes • Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout,
• Up to 200 Mpts/ch record length Pattern and Video (HDTV supported). Trigger zone helps to simplify advanced
• Digital trigger system triggering
• Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout, • Serial bus triggering and decoder, supports I2C, SPI, UART, CAN, LIN
Pattern, Qualified, Nth edge, Setup/hold, Delay and Video (HDTV supported). (Standard) and CAN FD, FlexRay, I2S, and MIL-STD-1553B, SENT and
Zone Trigger simplifies advanced triggering Manchester (optional) protocols
• Serial bus triggering and decoder, supports protocols I2C, SPI, UART, CAN, • Low background noise, features 0.5 mV/div to 10 V/div voltage scales
LIN, CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT and Manchester • 10-bit mode provides higher resolution and lower noise
• Segmented acquisition (Sequence) mode, dividing the maximum record • Segmented acquisition (Sequence) mode, dividing the maximum record
length into multiple segments (up to 80,000), according to trigger conditions length into multiple segments (up to 90,000), according to trigger conditions
set by the user, with a very small dead time between segments to capture the set by the user, with a very small dead time between segments to capture the
qualifying event qualifying event
• History waveform record (History) function, the maximum recorded waveform • History waveform record (History) function for up to 90,000 triggered
length is 80,000 frames waveforms (frames)
• Automatic measurements on 50+ parameters, supports statistics with • Automatic measurement function on 50+ parameters, supports statistics with
histogram, track, trend, Gating measurement, and measurements on Math, histogram and trend
History and Ref • Two Math traces, support 2 Mpts FFT, +, -, x, ÷, d/dt, ∫dt, √, average, ERES,
• 2 Math traces (2 Mpts FFT, addition, subtraction, multiplication, division, and formula editor
integration, differential, square root, etc.), supports formula editor • Abundant data processing and analysis functions such as Search,
• Abundant data analysis functions such as Search, Navigate, Digital Voltmeter, Navigate, Mask Test, Bode plot, Power Analysis (optional) and Counter
Counter, Waveform Histogram, Bode plot and Power Analysis • 16 digital channels (optional)
• High Speed hardware-based Average, ERES; High Speed hardware-based • Built-in 50 MHz waveform generator (optional)
Mask Test function, with Mask Editor tool for creating user-defined masks • Large 10.1” TFT-LCD display with 1024x600 resolution; Capacitive touch
• 16 digital channels (optional) screen supports multi-touch gestures
• Built-in 25 MHz waveform generator • Multiple interfaces: USB Host, USB Device (USBTMC), LAN(VXI-11/Telnet/
• Large 10.1” TFT-LCD display with 1024 * 600 resolution; Capacitive touch Socket), Pass/Fail, Trigger Out
screen supports multi-touch gestures • Built-in web server supports remote control by the LAN port using a web
• Interfaces include: USB Hosts, USB Device (USBTMC), LAN (VXI-11/Telnet/ browser; Supports SCPI remote control commands
Socket), Pass/Fail, Trigger Out
• Built-in web server supports remote control over the LAN port using a web
browser. Supports SCPI remote control commands. Supports external mouse
and keyboard

www.siglent.com 4
 Super Phosphor Oscilloscope

SDS2000X-E Series SDS1000X HD Series

SDS2352X-E (350 MHz) SDS1204X HD / SDS1202X HD (200 MHz)

SDS2202X-E (200 MHz) SDS1104X HD / SDS1102X HD (100 MHz)

Features and Benefits: Features and Benefits:

• Real-time sampling rate up to 2 GSa/s (1 GSa/s per channel, if both channels • 12-bit High Resolution
active) • 12-bit Analog-Digital Convertors with sample rate up to 2 GSa/s
• Intelligent trigger: Edge, Slope, Pulse Width, Window, Runt, Interval, Time • Front ends with 70 μVrms noise floor @ 200 MHz bandwidth
out (Dropout), Pattern • 2/4 analog channels, up to 200 MHz bandwidth
• Serial bus triggering and decoding (standard), supports protocols IIC, SPI, • SPO technology
UART, CAN, LIN • Waveform capture rate up to 120,000 wfm/s (normal mode), and 500,000
• Video trigger, supports HDTV wfm/s (sequence mode)
• Low background noise with voltage scales from 500 μV/div to 10 V/div • Supports 256-level intensity grading and color temperature display modes
• 10 types of one-button shortcuts, supports Auto Setup, Default, Cursors, • Up to 100 Mpts record length
Measure, Roll, History, Display/Persist, Clear Sweep, Zoom and Print • Digital trigger system
• Segmented acquisition (Sequence) mode, divides the maximum record length • Intelligent trigger: Edge, Slope, Pulse width, Window, Runt, Interval, Dropout,
into multiple segments (up to 80,000), according to trigger conditions set by Pattern, Video (HDTV supported) , Qualified, Nth edge, Delay, Setup/Hold
the user, with a very small dead time segment to capture qualifying events time.
• History waveform record (history) function (maximum recorded waveform • Serial bus triggering and decoder, supports protocols I2C, SPI, UART, CAN,
length is 80,000 frames) LIN, CAN FD(decode only), FlexRay(decode only)
• Automatic measurement function for 38 parameters as well as Measurement • Segmented acquisition (Sequence) mode, dividing the maximum record
Statistics, Zoom, Gating, Math, History and Reference functions length into multiple segments (up to 80,000), according to trigger conditions
• 1 Mpts FFT set by the user, with a very small dead time between segments to capture the
• Math and measurement functions use all sampled data points in memory (up qualifying event
to 28 Mpts) • History waveform record (History) function, the maximum recorded waveform
• Preset key can be customized for user settings or factory “defaults” length is 80,000 frames
• Security Erase mode • Automatic measurements on 50+ parameters, supports statistics with
• High Speed hardware based Pass / Fail function histogram, track, trend, Gating measurement, and measurements on Math,
• Search and navigate History and Ref
• Large 7 inch TFT -LCD display with 800 * 480 resolution • 4 Math traces (2 Mpts FFT, addition, subtraction, multiplication, division,
• Multiple interface types: USB Host, USB Device (USB -TMC), LAN, Pass / Fail, integration, differential, square root, etc.), supports formula editor
Trigger Out • Abundant data analysis functions such as Search, Navigate, Counter, Bode
• Supports SCPI remote control commands plot and Power Analysis
• VXI-11+SCPI, Telnet (port 5024) +SCPI and Socket (port 5025) +SCPI • High Speed hardware-based Mask Test function, with Mask Editor tool for
programming over LAN creating user-defined masks
• Supports web control and virtual instrument control panel for both PC and • 16 digital channels (optional)
mobile terminals • 25 MHz waveform generator(optional)
• Web control update rate of up-to 10 times/s provides nearly real-time update • Large 10.1” TFT-LCD display with 1024 * 600 resolution; Capacitive touch
rate screen supports multi-touch gestures
• Supports Multi-language display and embedded online help • Interfaces include: USB Hosts, USB Device (USBTMC), LAN (VXI-11/Telnet/
Socket), Pass/Fail, Trigger Out
• Built-in web server supports remote control over the LAN port using a web
browser. Supports SCPI remote control commands. Supports external mouse
and keyboard

www.siglent.com 5
 Super Phosphor Oscilloscope Digital Storage Oscilloscope

SDS1000X-E Series
SDS800X HD Series

SDS1204X-E / SDS1202X-E (200 MHz)

SDS824X HD / SDS822X HD (200 MHz)
SDS1104X-E (100 MHz)
SDS814X HD / SDS812X HD (100 MHz)
SDS804X HD / SDS802X HD (70 MHz)
Features and Benefits:
• Two channel series have one 1 GSa/s ADC, four channel series have two 1
Features and Benefits:
GSa/s ADCs. When all channels are enabled, each channel has a maximum
• 12-bit High Resolution
sample rate of 500 MSa/s. When a single channel per ADC is active, it has
• 12-bit Analog-Digital Convertors with sample rate up to 2 GSa/s
sampling rate of 1 GSa/s
• Front ends with 70 μVrms noise floor @ 200 MHz bandwidth
• The newest generation of SPO technology
• 2/4 analog channels, up to 200 MHz bandwidth
• Waveform capture rate up to 100,000 wfm/s (normal mode), and
• SPO technology
400,000 wfm/s (sequence mode)
• Waveform capture rate up to 120,000 wfm/s (normal mode), and 500,000
• Supports 256-level intensity grading and color display modes
wfm/s (sequence mode)
• Record length up to 14 Mpts
• Supports 256-level intensity grading and color temperature display modes
• Digital trigger system
• Up to 100 Mpts record length
• Intelligent trigger: Edge, Slope, Pulse Width, Window, Runt, Interval, Time
• Digital trigger system
out (Dropout), Pattern
• Intelligent trigger: Edge, Slope, Pulse width, Window, Runt, Interval, Dropout,
• Serial bus triggering and decoding (Standard), supports protocols IIC, SPI,
Pattern, Video (HDTV supported) , Qualified, Nth edge, Delay, Setup/Hold
UART, RS232, CAN, LIN
time.
• Serial bus triggering and decoder, supports protocols I2C, SPI, UART, CAN, • Segmented acquisition (Sequence) mode, divides the maximum record length

LIN into multiple segments (up to 80,000), according to trigger conditions set by

• Segmented acquisition (Sequence) mode, dividing the maximum record the user, with a very small dead time segment to capture the qualifying event.

length into multiple segments (up to 80,000), according to trigger conditions • 1 Mpts FFT
set by the user, with a very small dead time between segments to capture the • Math and measurement functions use all sampled data points (up to 14 Mpts)
qualifying event • MSO, 16 digital channels (four channel series only, optional)
• History waveform record (History) function, the maximum recorded waveform • Search and navigate (four channel series only)
length is 80,000 frames • USB AWG module (four channel series only, optional)
• Automatic measurements on 50+ parameters, supports statistics with • Bode plot (four channel series only)
histogram, track, trend, Gating measurement, and measurements on Math,
History and Ref
• 4 Math traces (2 Mpts FFT, addition, subtraction, multiplication, division,
integration, differential, square root, etc.), supports formula editor
• Abundant data analysis functions such as Search, Navigate, Counter, Bode
plot and Power Analysis
• High Speed hardware-based Mask Test function, with Mask Editor tool for
creating user-defined masks
• 16 digital channels (optional)
• 25 MHz waveform generator(optional)
• 7” TFT-LCD display with 1024 * 600 resolution; Capacitive touch screen
supports multi-touch gestures
• Interfaces include: USB Hosts, USB Device (USBTMC), LAN (VXI-11/Telnet/
Socket), Pass/Fail, Trigger Out
• Built-in web server supports remote control over the LAN port using a web
browser. Supports SCPI remote control commands. Supports external mouse
and keyboard. Supports NTP.

www.siglent.com 6
 Digital Storage Oscilloscope Handheld Oscilloscope

SHS1000X/SHS800X Series
SDS1000DL+ / SDS1000CML+ Series SHS1202X (200 MHz)
SHS1102X (100 MHz)
SDS1152CML+ (150 MHz) SHS820X (200 MHz)
SDS1102CML+ (100 MHz) SHS810X (100 MHz)
SDS1072CML+ (70 MHz)
SDS1052DL+ (50 MHz) Features and Benefits
• 200 MHz, 100 MHz bandwidth models
Features and Benefits • Sample rate of 1 GSa/s (single-channel), Sample rate of 500 MSa/s (two-
• 50 MHz, 70 MHz, 100 MHz, 150 MHz bandwidth models
channels)
• Real-time sampling rate up to 1 GSa/s, Equivalent-time sampling rate up to
• The Siglent SPO technology
50 GSa/s • Waveform capture rates up to 100,000 wfm/s (normal mode) and
• Memory Depth up to 2 Mpts 400,000 wfm/s (sequence mode)
• Trigger types: Edge, Pulse, Video, Slope, Alternate • Supports 256-level intensity grading and color temperature display modes
• Waveform math functions:+, -, *, /, FFT • Record length up to 12 Mpts
• 6 digits frequency counter • Digital trigger system
• Supports Multi-language display and embedded online help • Intelligent trigger: Edge, Slope, Pulse Width, Window, Runt, Interval, Time
• Screensaver from 1 minute to 5 hours out (Dropout), Pattern
• Digital filter and waveform recorder function • Serial bus triggering and decoding (Standard) for IIC, SPI, UART, CAN, and
• 7 inch TFT-LCD display with 800 * 480 resolution LIN protocols
• Video trigger/HDTV
• Low background noise with voltage scales from 2 mV/div to 100 V/div
• 3 one-button shortcuts for Oscilloscope, Multimeter and Recorder functions
• 8 one-button shortcuts for: Run/Stop, Auto Setup, Default, Measure, Cursors,
Display/Persist, Clear Sweep and Print. More function shortcuts available
when combined with the shift button
• Segmented acquisition (Sequence) mode, divides the maximum record length
into multiple segments (up to 80,000), according to trigger conditions set by
the user, with a very small dead time segment to capture the qualifying event
• History waveform record (History) function (maximum recorded waveform
length is 80,000 frames)
• Automatic measurement function for 38 parameters as well as Measurement
Statistics, Zoom, Gating, Math, History and Reference functions
• 1 Mpts FFT. Support Peaks and Markers
• Math and measurement functions use all sampled data points (up to 12 Mpts)
• Math functions (FFT, addition, subtraction, multiplication, division, integration,
differential, square root)
• Default key can be customized for user settings or factory “defaults”
• Supports Multi-language display and embedded online help
• Security Erase mode
• Search and navigate function
• Includes Recorder mode, including Sample and Measurement Loggers
• 6000 counts Digital Multimeter, Support DCV, ACV, DCI, ACI, Resistance,
Diode, Capacitance, Continuity test.
• True RMS AC Voltage/Current measurement multimeter
• 5.6-inch TFT-LCD display with 640 * 480 resolution
• Interface types: Isolated USB Host, USB Device (MicroUSB -TMC)
• Supports SCPI remote control commands
• UL2054 certified lithium battery pack, 6900 mAh capacity, external charger
• IP Rating: IP51
• Compliance with UL61010-1, UL61010-2-030, UL61010-2-033
www.siglent.com 7
 Arbitrary Waveform Generator Function/Arbitrary Waveform Generator

SDG7000A Series SDG6000X Series

SDG7102A (1 GHz) SDG6052X (500 MHz)

SDG7052A (500 MHz) SDG6032X (350 MHz)
SDG7032A (350 MHz) SDG6022X (200 MHz)

Features and Benefits Features and Benefits

• Dual channel differential/single-ended output, 16-bit LVDS/LVTTL digital bus • Dual-Channel, 500 MHz maximum bandwidth, 20 Vpp maximum output
output amplitude, high fidelity output with 80 dB dynamic range
• High-performance sampling system with 5 GSa/s sample rate and 14 -bit • High-performance sampling system with 2.4 GSa/s sampling rate and 16-bit
vertical resolution vertical resolution
• 1 GHz maximum bandwidth • Multi-function signal generator, meeting requirements in wide range,
• Generates arbitrary waveform with sample rates of 0.01 Sa/s ~ 2.5 GSa/s, Continuous Wave Generator, Pulse Generator, Function Arbitrary Waveform
with maximum memory depth of 512 Mpts, and provides segment editing / Generator, IQ Signal Generator (optional), Noise Generator, PRBS Generator
playback functions • Sweep and Burst function
• Generates vector signals with up to 500 MS/s symbol rate • Plenty of analog and digital modulation types: AM, DSB-AM, FM, PM, FSK,
• Generates low jitter pulses with 1 ns minimum pulse width and 500 ps ASK, PSK and PWM
minimum edge • Harmonics function
• Up to 1 GHz bandwidth White Gaussian Noise and the bandwidth is adjustable • Multi-pulse output function can be used to measure the switching parameters
• Supports PRBS up to 312.5 Mbps of power devices and evaluate its dynamic characteristics
• The digital bus can output digital signals up to 1 Gbps. • Supports sequence wave playback function, maximum storage depth per
• Supports analog/digital modulation, sweeping and bursting channel 20 Mpts
• Enhanced dual channel operation functions: inter channel tracking, coupling • Waveform Combining function
and copying; Dual channel superposition function; Supports mutual • Channel Coupling, Copy and Tracking function
modulation between channels • 196 built-in arbitrary waveforms
• The 24 Vpp analog output is superimposed with ± 12 Vdc offset to provide a • High precision Frequency Counter
maximum output range of ± 24 V (48 V) • Standard interfaces include: USB Host, USB Device (USBTMC), LAN (VXI-11,
• High precision Frequency Counter Socket, Telnet). Optional Interface: GPIB
• 5-inch capacitive touch screen with resolution of 800x480; Supports • 4.3” touch screen display for easier operation
external mouse and keyboard operation; Supports WebServer to control the
instruments remotely
• Supports multiple interfaces: 10 MHz In, 10 MHz Out, Trigger In/Out, Markers
etc
• Supports SCPI command for easy integration into test systems

www.siglent.com 8
 Function/Arbitrary Waveform Generator

SDG2000X Series SDG1000X Series

SDG2122X (120 MHz) SDG1062X (60 MHz)

SDG2082X (80 MHz) SDG1032X (30 MHz)
SDG2042X (40 MHz)
Features and Benefits
Features and Benefits • 150 MSa/s sampling rate, 14-bit vertical resolution, and 16 kpts waveform
length
• Dual-channel, 120MHz maximum bandwidth, 20Vpp maximum output • Innovative TrueArb and EasyPulse technology
amplitude, high fidelity output with 80dB dynamic range • Special circuit for Square wave function, can generate Square waves up to 60
• High-performance sampling system with 1.2GSa/s sampling rate and 16-bit MHz with jitter less than 300 ps+0.05 ppm of period
vertical resolution. No detail in your waveforms will be lost • Plenty of analog and digital modulation types: AM, DSB-AM, FM, PM, FSK,
• Innovative TrueArb technology, based on a point-by-point architecture, ASK, PSK and PWM, Sweep and Burst functions
supports any 8pts~8Mpts Arb waveform with a sampling rate in range of • Waveform Combining function
1μSa/s~75MSa/s • High precision Frequency Counter
• Innovative EasyPulse technology, capable of generating lower jitter Square or • Standard interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11)
Pulse waveforms, brings a wide range and extremely high precision in pulse • Optional interface: GPIB
width and rise/fall times adjustment
• Plenty of analog and digital modulation types: AM, DSB-AM, FM, PM, FSK,
ASK, PSK and PWM
• Sweep and Burst function Harmonic function
• 196 built-in arbitrary waveforms High precision Frequency Counter
• Standard interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11)
• Optional interface: GPIB
• 4.3” touch screen display for easier operation

SDG800 Series

SDG830 (30 MHz)

SDG810 (10 MHz)

Features and Benefits

• Advanced DDS technology, 3.5 inch color TFT-LCD
• 125 MSa/s sampling rate,14 bit vertical resolution,16 Kpts max wave length
• 5 types of standard waveforms, built-in 46 types of arbitrary waveforms, sync
signal output, 1 μHz frequency resolution
• Complete modulation functions: AM,DSB-AM, FM, PM, FSK, ASK, PWM, linear/
logarithmic sweep and burst
• Innovative EasyPulse technology, can output pulse of low jitter, quick rising/
falling edge
• Support USB-TMC protocol and SCPI programming command control
• Arbitrary waveform edit software, provides lots of painting method, capable
of edit complicate waveform quickly and precisely

www.siglent.com 9
 Function/Arbitrary Waveform Generator Programmable Switching DC Power Supply

SPS6000X Series
SDG1000X Plus Series
SPS6225X (200 V,25 A)
SDG1062X Plus (60 MHz) SPS6150X (100 V,50 A)
SDG1032X Plus (30 MHz)
SDG1022X Plus (25 MHz)
Features and Benefits
• Rated Voltage: 200 V / 100 V
Features and Benefits • Rated Current: 25 A / 50 A
• Dual channel, maximum output frequency 60 MHz, maximum output • Rated power: 1500 W
amplitude 20 Vpp • Wide range of output voltage and current values in a high-efficiency power
• 1 GSa/s digital-to-analog converter sampling rate,16-bit vertical resolution supply
• Innovative TrueArb technology, based on a point-by-point architecture, • CV, CC priority mode selection, better protection of equipment under test
supports any 24pts ~ 8Mpts Arb waveform with a sampling rate in range of • Load transient recovery time (Load change from 50~100%) < 2.5 ms
1 μSa/s ~250 MSa/s • Adjustable voltage and current slew rates
• Supports sequence wave playback function, maximum storage depth per • Setting and readback resolution: 10 mV, 10 mA
channel 8 Mpts • User-enabled internal output discharge circuit to accelerate output voltage
• Multi-pulse output function can be used to measure the switching parameters reduction
of power equipment and evaluate its dynamic characteristics • Remote Sense function to decrease lead resistance error
• Supports PRBS up to 40 Mbps • Local list function with up to 50 steps, USB import list sequence file
• Plenty of analog and digital modulation types: AM, DSB-AM, FM, PM, FSK, • External analog voltage control. Voltage and current monitoring outputs
ASK, PSK and PWM • OVP, OCP, LPP, OTP protection
• Sweep and Burst function • 3.12-inch OLED high-brightness display with a wide viewing angle of 170
• Harmonic function degrees
• Waveform Combining function • Equipped with USB, LAN standard communication interface, optional USB-
• Standard interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11) GPIB module
• 44 mm (1U) height, 19” width for convenient rack mounting
• Embedded Web Server offers remote control through a web browser without
the need for drivers or additional software

www.siglent.com 10
Programmable Switching DC Power Supply Programmable Linear DC Power Supply

SPS5000X Series
SPD4000X Series
SPS5161X (160 V, 7.5 A) SPS5081X (80 V, 15 A)
SPD4323X (6 V/3.2 A, 32 V/3.2 A, 32 V/3.2 A, 6 V/3.2 A)
SPS5162X (160 V, 15 A) SPS5082X (80 V, 30 A)
SPD4121X (15 V/1.5 A, 12 V/10 A, 12 V/10 A, 15 V/1.5 A)
SPS5163X (160 V, 22.5 A) SPS5083X (80 V, 45 A)
SPD4306X (15 V/1.5 A, 30 V/6 A, 30 V/6 A, 15 V/1 A)
SPS5164X (160 V, 7.5 A) SPS5084X (80 V, 15 A)
SPS5165X (160 V, 7.5 A) SPS5085X (80 V, 15 A) Features and Benefits
SPS5051X (50 V, 10 A) • Rated voltage: 32 V, 12 V, 30 V; rated output power: 240 W, 285 W, 400 W
SPS5041X (40 V, 30 A) • Up to four high-precision power supplies with independent controllable
SPS5042X (40 V, 60 A) outputs, supporting CH2 and CH3 series and parallel connections
SPS5043X (40 V, 90 A) • Clear graphical interface with waveform and timer display modes
SPS5044X (40 V, 30 A) • 5-digit voltage and current display with minimum resolution of 1 mV, 1 mA
• Fast output response time: < 50 us
SPS5045X (40 V, 30 A)
• The high current channel support remote voltage compensation sense

Features and Benefits function. The maximum compensation voltage is 0.6V

• Rated Output Voltage: 40 V, 50 V, 80 V, 160 V • Overvoltage protection and overcurrent protection or safe and accurate
• Rated Output Power: 180 W, 360 W, 720 W, 1080 W operation
• Wide range of output voltage and current, high efficiency power supply • Equipped with a 4.3-inch TFT-LCD display (480*272 resolution)
• CV, CC priority mode selection, better protection of equipment under test • USB and LAN standard communication
• Load transient recovery time (Load change from 50~100%) <1 ms • USB-GPIB module is optional
• Adjustable slew rate of output voltage and current • Excellent channel density with up to 4 channels in a 3U half rack package
• Setting and readback resolution: 1 mV, 1 mA • Internal data storage for setups and parameters
• User enabled internal output discharge circuit to accelerate the down • Embedded Web Server with instrument communication that doesn’t require
programming of the output voltage software installation
• Remote Voltage Sensing • Fully SCPI programming command set support as well as a LabView driver for
• List function up to 50 steps; can be created from the front panel or by remote control and system automation
importing list sequence files from a USB memory device
• External analog voltage and resistor control of voltage or current output
• External voltage and current monitoring output
• OVP, OCP, LPP, OTP protection.
• 2.4-inch OLED high brightness liquid crystal display, 170-degree viewing angle
• Standard Interface: USB, LAN, Analog Control Interface
• Optional Interface: USB-GPIB module
• 1/2, 1/3, 1/6 rack mount size
• Embedded Web Server offers remote control through a web browser without
the need for the driver or software

www.siglent.com 11
 Programmable Linear DC Power Supply Programmable Linear DC Power Supply

SPD3303X Series

SPD3303X-E (10 mv, 10 mA)

SPD3303X (1 mv, 1 mA) SPD1000X Series

Features and Benefits SPD1168X (16 V/8 A)

• 3 independent controlled and isolated outputs, 32 V/3.2 A×2, SPD1305X (30 V/5 A)
2.5 V/3.3 V/5 V/3.2 A×1, total 220 W
• 5 digits Voltage, 4 digits Current Display, Minimum Resolution: 1 mV/1 mA Features and Benefits
(SPD3303X) • Single path high-precision programmable voltage output
• Supports front panel timing output functions 16 V/8 A, total power up to 128 W
• 4.3 inch true color TFT- LCD 480x272 display 30 V/5 A, total power up to 150 W
• 3 types of output modes: independent, series, parallel • Stable, reliable, Low ripple and noise：≤ 350 uVrms/3 mVpp; < 2 mArms
• 100 V/120 V/220 V/230 V compatible design to meet the needs of different • Fast transient response time: < 50 μs
power grids • 5 digit Voltage, 4 digit Current Display, Minimum Resolution: 1 mV/1 mA
• Intelligent temperature-controlled fan, effectively reducing noise • Supports front panel timing output functions
• Clear graphical interface, with the waveform display function • 2.8 inch true color TFT- LCD 240 *320 display
• Internal 5 groups of system parameter save/recall, supports data storage • 2 types of output modes：Two-wire output mode, 4-wire compensation output
space expansion mode, Maximum compensation voltage 1 V
• Provides PC software: Easypower, supports SCPI, LabView driver • 100/120/220/230 V compatible design to meet the needs of different power
grids
• Intelligent temperature-controlled fan reduces noise
• Clear graphical interface, with the waveform display function
• Internal 5 groups of system parameter save/recall
• Includes PC software: Easypower, supports SCPI, LabView driver

SPD3303C Series

SPD3303C (10 mv,10 mA)

Features and Benefits

• 3 independent controlled and isolated output: 32 V/3.2 A×2, 2.5 V/3.3 V/
5 V/3.2 A×1, total power 220 W
• Resolution: 10 mV/10 mA
• Supports panel timing output functions
• LED display; 32 V full scale, 4 digits; 3.2 A full scale, 3 digits
• 100 V/120 V/220 V/230 V compatible design, to meet the needs of different
power grids
• Intelligent fan for temperature control, effectively reduces noise
• Five groups of internal system parameter storage. Supports data storage
space expansion
• Supports SCPI commands & USB device interface. Includes PC software

www.siglent.com 12
 Programmable DC Electronic Load Digital Multimeter

SDL1000X Series
SDM4065A Series
SDL1030X/X-E (300 W)
SDL1020X/X-E (200 W) SDM4065A
SDM4065A-SC (with Scanner Card)
Features and Benefits
Features and Benefits
• SDL1020X (Single channel ): DC 150 V/30 A, total power up to 200 W
• 5-inch true color TFT-LCD display with a resolution of 800 * 480, paired with
• SDL1030X (Single channel ): DC 150 V/30 A, total power up to 300 W
a touchable screen and a brand-new UI
• 4 static modes / Dynamic mode: CC/CV/CR/CP
• Real 6½ digit (2,200,000 count) readings resolution
• CC Dynamic mode: Continuous, pulsed, toggled
• Up to 50k rdgs/s of measurement speed, support a maximum sampling
• CC Dynamic mode: 25 kHz, CP Dynamic mode: 12.5 kHz, CV Dynamic mode:
interval of 100 PLC and a minimum sampling interval of 0.001 PLC
0.5 Hz
• 512 MB RAM, capable of saving up to 2M readings for caching, support
• Measuring speed of voltage and current: up to 500 kHz
timestamp
• Adjustable current rise time range: 0.001 A/us~2.5 A/us
• 256 MB Nand Flash, supports storage of various types of files such as
• Min. readback resolution: 0.1 mV, 0.1 mA
readings, images, configuration files
• Short-circuit, Battery test, CR-LED mode, and factory test functions
• 4 trigger modes: auto trigger, single trigger, external trigger and level trigger
• 4-wire SENSE compensation mode function
• 4 display modes: numerical, bar meter, trend chart and histogram
• List function supports editing as many as 100 steps
• DC measurements support autozero functions
• Program function supports 50 groups of steps
• True-RMS AC Voltage and AC Current measurement
• OCP, OVP, OPP, OTP and LRV protection
• Support automatic switching between 10 A high current and 3 A low current
• External analog control
measurement modes, and can be tested up to 30 A when paired with an
• Voltage, Current monitoring via 0-10 V
external shunt
• 3.5 inch TFT-LCD display, capable of displaying multiple parameters and
• Support RTD, thermocouple and user-defined sensor
states simultaneously
• Support dual display and probe hold functions
• Built-in RS232/USB/LAN communication interface, USB-GPIB module
• Support standard SCPI remote control commands
(optional)
• Equipped with EasyDMM-X host computer control and sampling software
• Waveform trend chart and ease-to-use file storage and call functions
• Communications interface: USB Device (optional USB-GPIB adapter), USB
• Includes PC software: Supports SCPI, LabView driver
Host, LAN
• Support BNC VMC output, Trigger input
• Support VNC, Web-server
• Chinese and English menu, and built-in help system for easy information
retrieval
• Sample rate up to 50 kSa/s, a maximum of 2M points can be acquired in a
single acquisition, and the bandwidth is 10 kHz

* Not for sale in North America.

www.siglent.com 13
 Digital Multimeter

SDM3065X Series SDM4055A Series

SDM3065X SDM4055A
SDM3065X-SC (with Scanner Card) SDM4055A-SC (with Scanner Card)

Features and Benefits Features and Benefits

• 4.3” TFT-LCD, 480*272 • 5-inch TFT-LCD display with a resolution of 800 * 480, paired with a
• Real 6½ digits readings resolution (2,200,000 counts) touchable screen and a brand-new UI
• 1Gb Nand flash size, Mass storage configuration files and data files • Real 5½ digit (220,000 count) readings resolution
• True-RMS AC Voltage and AC Current measuring • Reading rate from 5 rdgs/s to 4.8k rdgs/s, and support: Fast, Medium and
• Supports double display, Chinese and English Menu Slow mode
• File management (support for U-disc and local storage) • 512MB RAM, capable of saving up to 2M readings for caching, support
• Built-in cold terminal compensation for thermocouple timestamp
• Comes with easy, converient and flexble any sensor measurement control • 256MB Nand Flash, supports storage of various types of files such as
software: EasyDMM readings, images, configuration files
• Standard interfaces: USB Device, USB Host, LAN (Optional Accessories: USB- • 4 trigger modes: auto trigger, single trigger, external trigger and level trigger
GPIB Adapter) • 4 display modes: numerical, bar meter, trend chart and histogram
• Scanner Card SC1016 (Only for SDM3065X-SC) • True-RMS AC Voltage and AC Current Measurements
• Built-in Hlep system makes information acquisition easier • Support automatic switching between 10 A high current and 3 A low current
• Support remote control operation via SCPI commands. Compatible with measurement modes, and can test up to 30 A when paired with an external
commands of other main stream multimeters shunt
• Supports intelligent management system for laboratory based on BS • Support RTD, thermocouple and user-defined sensor
framework and LAN • Support dual display and probe hold functions
• Support SCPI remote control commands
• Equipped with EasyDMM-X host computer control and sampling software
• Communications interface: USB Device (optional USB-GPIB adapter), USB
Host, LAN
• Other interface: VMC output, Trigger input
• Remote access support for VNC, web servers
• Chinese and English menu, and built-in help system for easy information
retrieval

* Not for sale in North America.

www.siglent.com 14
 Digital Multimeter Vector Network Analyzer

SDM3055 Series

SDM3055
SDM3055-SC (with Scanner Card) SNA6000A Series
Features and Benefits SNA6134A (100 kHz~26.5 GHz)
• Real 5½ digits readings resolution ( 240, 000 counts ) SNA6132A (100 kHz~26.5 GHz)
• Up to 150 rdgs/s measurement speed SNA6034A (100 kHz~26.5 GHz)
• True-RMS AC Voltage and AC Current measuring SNA6032A (100 kHz~26.5 GHz)
• 1 Gb Nand flash size, Mass storage configuration files and data files
SNA6124A (100 kHz~13.5 GHz)
• Built-in cold terminal compensation for thermocouple temperature
SNA6122A (100 kHz~13.5 GHz)
measurements
SNA6024A (100 kHz~13.5 GHz)
• With easy, convenient and flexible PC software: EasyDMM
standard interfaces: USB Host, LAN ( Optional Accessories USB-GPIB Adapter )
SNA6022A (100 kHz~13.5 GHz)
• Scanner Card SC1016 ( Only for SDM3055-SC )
• Support remote control operation via SCPI commands.Compatible with
Features and Benefits:
• Frequency range: 100 kHz ~ 13.5 GHz and 100 kHz ~ 26.5 GHz
commands of main stream multimeters
• Frequency resolution: 1 Hz
• Level resolution: 0.05 dB
• Range of IFBW: 1 Hz~10 MHz
• Setting range of output level: -55 dBm ~ +10 dBm
• Dynamic range: 135 dB
• Types of calibration: Response calibration, Enhanced Response calibration,
Full-one port calibration, Full-two port calibration, Full-three port calibration,
Full-four port calibration, TRL calibration
• Types of measurement: Scattering-parameter measurement,
differential-parameter measurement, receiver measurement, time-domain
parameter analysis, limit test, ripple test, impedance conversion, fixture
simulation, adapter removal/insertion, spectrum analysis frequency offset,
scalar mixer measurement, pulse measurement, Material Measurement
• Internal Bias-Tee connections
• Interface: LAN, USB Device, USB Host (USB-GPIB)
• Remote control: SCPI/ Labview/ IVI based on USB-TMC / VXI-11 / Socket /
Telnet / WebServer
SDM3045X Series • 12.1-inch touch screen
• Video output: HDMI/DVI-D/DP

SDM3045X

Features and Benefits

• Real 4½ digit (60000 counts) readings resolution
• Up to 150 rdgs/s measurement speed
• True-RMS AC Voltage and AC Current measuring
• 1 Gb NAND flash size, Mass storage configuration files and data files
• Built-in cold terminal compensation for thermocouple
• With easy, convenient and flexible PC software: EasyDMM
• Standard interface: USB Device, USB Host, LAN (Optioanal Accessories:
USB-GPIB Adapter)
• USB & LAN remote interfaces support common SCPI command set.
Compatible with other popular DMMs on the market

www.siglent.com 15
 Vector Network Analyzer Portable Vector Network Analyzer

SNA5000A Series SHN900A Series

SNA5032A (100 kHz~26.5 GHz) SHN926A (30 kHz~26.5 GHz)
SNA5022A (100 kHz~13.5 GHz) SHN920A (30 kHz~20 GHz)
SNA5014A (9 kHz~8.5 GHz) SHN914A (30 kHz~14 GHz)
SNA5004A (9 kHz~4.5 GHz)
SNA5012A (9 kHz~8.5 GHz) Features and Benefits:
SNA5002A (9 kHz~4.5 GHz) • Standard VNA and CAT mode, optional SA mode
• Frequency range: 30 kHz - 26.5 GHz
Features and Benefits: • Frequency resolution: 1 Hz
• Frequency range: 9 kHz~8.5 GHz and 100 kHz~26.5 GHz • Level resolution: 0.05 dB
• Frequency resolution: 1 Hz • Range of IFBW: 10 Hz~3 MHz
• Level resolution: 0.05 dB • Setting range of output level: -45 dBm ~ +10 dBm
• Range of IFBW: 1 Hz~10 MHz • Dynamic range: 110 dB(Typ.)
• Setting range of output level: -55 dBm ~ +10 dBm • Types of calibration: Response calibration, Enhanced Response calibration,
• Dynamic range: 125 dB Full-one port calibration, Full-two port calibration, TRL calibration
• Types of calibration: Response calibration, Enhanced Response calibration, • Types of measurement: Scattering-parameter measurement, differential-
Full-one portcalibration, Full-two port calibration, Full-three port calibration, parameter measurement, receiver measurement, time-domain parameter
Full-four port calibration, TRL calibration analysis, limit test, ripple test, impedance conversion, fixture simulation,
• Types of measurement: Scattering-parameter measurement, adapter removal/insertion, spectrum analysis frequency offset, scalar mixer
differential-parameter measurement,receiver measurement, time-domain measurement, pulse measurement
parameter analysis, limit test, ripple test, impedance conversion, fixture • Internal Bias-Tee connections
simulation, adapter removal/insertion, enhanced time-domain parameter • Support GPS, Time and Location Information Saving
analysis (TDR), spectrum analysis, frequency offset, scalar mixer measurement • Interface: LAN, USB Device, USB Host (USB-GPIB)
• Support Bias-Tees • Remote control: SCPI/ Labview/ IVI based on USB-TMC / VXI-11 / Socket /
• Interface: LAN, USB Device, USB Host(USB-GPIB) Telnet / WebServer
• Remote control: SCPI/Labview/IVI based on USB-TMC/VXI-11/Socket/Telnet/ • 8.4-inch touch screen, Mouse, Keyboard
WebServer • Typical working time 4 hours, 3.2 kg net weight
• 12.1-inch touch screen
• Video output: HDMI

www.siglent.com 16
Switch Matrix Mechanical Switch

SSM5000A Series SSU5000A Series

SSM5342A (100 kHz~26.5 GHz) SSU5504A (DC~50 GHz)

SSM5321A (100 kHz~26.5 GHz) SSU5503A (DC~50 GHz)
SSM5144A (9 kHz~9 GHz) SSU5502A (DC~50 GHz)
SSM5142A (9 kHz~9 GHz) SSU5501A (DC~50 GHz)
SSM5124A (9 kHz~9 GHz) SSU5266A (DC~26.5 GHz)
SSM5122A (9 kHz~9 GHz) SSU5265A (DC~26.5 GHz)
SSU5264A (DC~26.5 GHz)
SSU5263A (DC~26.5 GHz)
Features and Benefits: SSU5262A (DC~26.5 GHz)
• Characteristic impedance: 50 Ω SSU5261A (DC~26.5 GHz)
• Highest frequency: 9 GHz (or 26.5 GHz) SSU5184A (DC~18 GHz)
• Maximum number of input ports: 4
SSU5183A (DC~18 GHz)
• Maximum number of output ports: 24
SSU5182A (DC~18 GHz)
• RF connector: 3.5 mm female
SSU5181A (DC~18 GHz)
• Maximum input power: 20 dBm
• Maximum input DC voltage: 35 V
Features and Benefits:
• Interface: LAN, USB Device, Direct Control (in), Direct Control (out) Screen
• Maximum frequency: 18 GHz/ 26.5 GHz/ 50 GHz
size: 2.4-inch
• 1 to 4 SPDT switches or 1 to 2 SP6T switch configurations
• SCPI Controllable via VISA and EasySSU software
• USB Connectivity
• Size: WxHxD=153x62.4x137.5 mm
• RF connector: SMA female or 2.4 mm female

www.siglent.com 17
 Spectrum Analyzer

SSA5000A Series SSA3000X Series

SSA5085A (9 kHz~26.5 GHz) SSA3032X (9 kHz~3.2 GHz)

SSA5083A (9 kHz~13.6 GHz) SSA3021X (9 kHz~2.1 GHz)

Features and Benefits: Features and Benefits:

• -161 dBm/Hz Displayed Average Noise Level (Typ.)
• Spectrum Analyzer Frequency Range from 9 kHz up to 13.6 GHz/26.5 GHz
• -98 dBc/Hz @10 kHz Offset Phase Noise (1 GHz, Typ.)
• -165 dBm/Hz Displayed Average Noise Level (Typ.)
• Total Amplitude Accuracy < 0.7 dB
• -105 dBc/Hz@1 GHz,10 kHz offset SSB Phase Noise (Typ.)
• 1 Hz Minimum Resolution Bandwidth (RBW)
• 25 MHz/40 MHz Analysis Bandwidth
• Preamplifier Standard
• 100% POI 7.20 μs, Dynamic Range 60 dB, Multi-view for Density, Spectrogram
• Up to 3.2 GHz Tracking Generator (Standard)
and PvT
• Reflection Measurement Kit (Opt.)
• Channel power, ACPR, OBW, Harmonic, TOI measurement etc.
• Advanced Measurement Kit (Opt.)
• Analog Modulation Analysis and Vector Digital Modulation Analysis
• EMI Pre-compliance Measurements Kit (Opt.)
• 12.1 inch Multi-Touch Screen, HDMI output
• 10.1 lnch WVGA (1024x600) Display
• Web Browser Remote Control on PC and Mobile Terminals and File Operation

SSA3000X Plus Series SSA3000X-R Series

SSA3075X Plus (9 kHz~7.5 GHz) SSA3075X-R (9 kHz~7.5 GHz)

SSA3032X Plus (9 kHz~3.2 GHz) SSA3050X-R (9 kHz~5.0 GHz)
SSA3021X Plus (9 kHz~2.1 GHz) SSA3032X-R (9 kHz~3.2 GHz)
SSA3015X Plus (9 kHz~1.5 GHz)
Features and Benefits:
Features and Benefits: • -165 dBm/Hz Displayed Average Noise Level (Typ.)
• -165 dBm/Hz Displayed Average Noise Level (Typ.) • -98 dBc/Hz.@10 kHz Offset Phase Noise (1 GHz, Typ.)
• -98 dBc/Hz.@10 kHz Offset Phase Noise (1 GHz, Typ.) • Level Measurement Uncertainty < 0.7 dB (Typ.)
• Level Measurement Uncertainty < 0.7 dB (Typ.) • Preamplifier Standard
• 1 Hz Minimum Resolution Bandwidth (RBW) • Tracking Generator Standard
• Preamplifier Standard • Up to 40 MHz Real Time Analysis Bandwidth
• Tracking Generator • 100% POI 7.20 μs, Dynamic Range 60 dB
• Analog and Digital Signal Modulation Analysis Mode (Opt.) • Multi-view for Density, Spectrogram, PvT, and multi trigger and FMT
• EMI Filter and Quasi-Peak Detector Kit(Opt.) • Modulation Analysis up to 40 MHz BW (Opt.)
• 10.1 lnch Multi-Touch Screen , Mouse and Keyboard supported • EMI Filter and Quasi-Peak Detector Kit(Opt.)
• Web Browser Remote Control on PC and Mobile Terminals and File Operation • 10.1 inch Multi-Touch Screen , Mouse and Keyboard supported
• Web Browser Remote Control on PC and Mobile Terminals and File Operation

www.siglent.com 18
 Spectrum & Vector Network Analyzer Portable Signal Analyzer

SVA1000X Series
SHA860A Series
SVA1075X (9 kHz~7.5 GHz)
SVA1032X (9 kHz~3.2 GHz) SHA862A (9 kHz~7.5 GHz)
SVA1015X (9 kHz~1.5 GHz) SHA861A (9 kHz~3.6 GHz)

Features and Benefits: Features and Benefits:

• Vector Network Analyzer Frequency Range from 100 kHz up to 7.5 GHz • Frequency Range 9 kHz~3.6/7.5 GHz, 5 kHz usable

• -165 dBm/Hz Displayed Average Noise Level (Typ.) • Displayed Average Noise Level (DANL) -165 dBm/Hz

• -98 dBc/Hz.@10 kHz Offset Phase Noise (1 GHz, Typ.) • SSB Phase Noise -104 dBc/Hz.@1 GHz, 10 kHz offset

• Level Measurement Uncertainty < 0.7 dB (Typ.) • Analysis Bandwidth 40/110 MHz

• 1 Hz Minimum Resolution Bandwidth (RBW) • 5G NR OTA Measurement, multi-PCI and multi-beam analysis

• Preamplifier Standard • LTE FDD and TDD OTA Measurement, multi-PCI analysis

• Tracking Generator Standard • Channel Power, Occupied Bandwidth, Adjacent Channel Power, SHI and TOI

• Distance To Fault (Opt.) etc.

• Analog and Digital Signal Modulation Analysis Mode (Opt.) • IQ Data Acquisition in 110 MHz Band Width

• EMI Filter and Quasi-Peak Detector Kit(Opt.) • Real-Time Spectrum Analysis in 110 MHz Band Width, 100% POI time 3.51 µs

• Advanced Measurement Kit (Opt.) • Pulse Profile Measurements

• 10.1 lnch Multi-Touch Screen , Mouse and Keyboard supported • Indoor and outdoor map for Coverage Mapping

• Web Browser Remote Control on PC and Mobile Terminals and File Operation • Trace Recording/Playback with GNSS location
• AM/FM/PM Analog Modulation Analysis, and ASK/FSK/PSK/MSK/QAM Digital

Portable Spectrum Analyzer Modulation Analysis

• AM/FM/PM Analog Modulation Audio Tune & Listening
• Field Strength (EMF) Measurements and EMI Measurements
• Independent Source to 7.5 GHz
• Vector Network Analyzer, 1-Path 2-Ports S11 and S21 Network Analysis, S11
directionality 40 dB, S21 dynamic 114 dB
• Cable and Antenna Test, Distance To Fault and Time Domain Analysis
• TTA test, bias out 12V to 32V DC
• Chargeable Battery working time 2.5 hours, 3.2 kg net weight
• 8.4 lnch Multi-Touch Screen, mouse and keyboard supported

SHA850A Series

SHA852A (9 kHz~7.5 GHz)

SHA851A (9 kHz~3.6 GHz)

Features and Benefits:

• Spectrum Analyzer Frequency Range from 9 kHz up to 7.5 GHz, -165 dBm/
Hz Displayed Average Noise Level (Typ.), -104 dBc/Hz.@10 kHz Offset Phase
Noise (1 GHz, Typ.), 1 Hz up to 10 MHz Minimum Resolution Bandwidth (RBW),
Preamplifier and independent signal source up to 7.5 GHz, GPS positioning and
logging
• Cable and Antenna Test Frequency Range from 100 kHz up to 7.5 GHz,
Distance To Fault and Time Domain Analysis
• Vector Network Analyzer, Bias out up to 32VDC
• Typical working time 4 hours, 3.2 kg net weight, 8.4 lnch Multi-Touch Screen ,
Mouse and Keyboard supported
www.siglent.com 19
 RF Signal Generator RF Signal Generator

SSG6000A Series SSG6082A-V

SSG6087A (CW MODE 100 kHz ~ 40 GHz) SSG6082A-V
SSG6085A (CW MODE 100 kHz ~ 20 GHz) (CW MODE 9 kHz~8 GHz/IQ MODE 10 MHz~8 GHz)
SSG6083A (CW MODE 100 kHz ~ 13.6 GHz)
Features and Benefits
Features and Benefits • Highest Frequency: 8 GHz
• Frequency up to 13.6 GHz/ 20 GHz/ 40GHz • Output Frequency Resolution: Up to 0.001 Hz
• 0.001 Hz frequency setting resolution • Level Setting Range: -140 dBm to 30 dBm
• Level setting range: -130 dBm ~ 24 dBm • Phase Noise: < -132 dBc/Hz @ 1 GHz, offset 10 kHz (typical value)
• Phase Noise: -135 dBc / Hz @ 1 GHz, 20 kHz offset (typ.) • Amplitude Accuracy: ≤ 0.7 dB (typical value)
• Level error ≤ 0.7 dB (typ.) • Modulation Support: Supports AM/FM/PM analog modulation, internal and
• Provides AM/PM/FM analog modulation with internal, external or Int+Ext external modulation options.
source • Pulse Modulation: Supports pulse modulation function, pulse train generator,
• Single pulse, double pulse and pulse train generator (option) and user-defined pulse sequences (optional).
• The power meter control kit can easily use the power meter to measure • General Modulation: Capable of real-time output of QAM, FSK, ASK, PSK,
power, control power output and correct line loss 5 inch TFT capacitive multi-tone, and various other modulated signals. Supports playback of
touch screen, mouse and keyboard supported waveform files and sequences.
• Web browser remote control on PC and mobile terminals • Support waveform file playback: waveform sequence generation and
• Standard interface includes USB Host, USB Device (USB TMC), LAN (VXI-11, playback.
Socket, Telnet). Optional interface: GPIB • Communication Protocol Signals: Supports generation of common
• Standard OCXO and step attenuator (0 to 110 dB, 10 dB step) communication protocol signals such as 5G NR, WLAN, LTE, BLUETOOTH,
IOT, etc., when used with SigIQPro software.
• MIMO and Other Applications: Supports MIMO and various other application
scenarios.
• Real-time IQ Baseband AWGN: Supports real-time IQ baseband AWGN,
allowing accurate control of signal and noise power, simplifying additional
measurements and calculations required for receiver measurements.
• Power Meter Control Kit: Facilitates power measurement, control of power
output, and line loss correction using a power meter.
• Vector Mode S-Parameter Compensation: Supports S-parameter
compensation in vector mode to optimize the broadband characteristics of
the test system.
• Web Remote Control: Supports web remote control for convenient remote
SSG5000A Series operation by users.

SSG5085A (CW MODE 9 kHz ~ 20 GHz)

SSG5083A (CW MODE 9 kHz ~ 13.6 GHz)

Features and Benefits

• Frequency up to 13.6 GHz / 20 GHz
• 0.001 Hz frequency setting resolution
• Level setting range: -130 dBm ~ 25 dBm
• Phase Noise: -120 dBc / Hz @ 1 GHz, 20 kHz offset (typ.)
• Level error ≤ 0.7 dB (typ.)
• Provides AM, FM, PM analog modulation with internal, external or Int+Ext
source
• Single pulse, double pulse and pulse train generator (option)
• The power meter control kit can easily use the power meter to measure
power, control power output and correct line loss
• 5 inch TFT capacitive touch screen, mouse and keyboard supported
• Web browser remote control on PC and mobile terminals
• Standard interface includes USB Host, USB Device (USB TMC), LAN (VXI-11,
Socket, Telnet). Optional interface: GPIB

www.siglent.com 20
 RF Signal Generator RF Signal Generator

SSG5000X Series SSG3000X Series

SSG5060X (CW MODE 9 kHz ~ 6 GHz) SSG3032X (CW MODE 9 kHz~3.2 GHz)
SSG5040X (CW MODE 9 kHz ~ 4 GHz) SSG3021X (CW MODE 9 kHz~2.1 GHz)
SSG5060X-V (CW MODE 9 kHz ~ 6 GHz / SSG3032X-IQE (IQ MODE 10 MHz~3.2 GHz)
IQ MODE 10 MHz ~ 6 GHz) SSG3021X-IQE (IQ MODE 10 MHz~2.1 GHz)
SSG5040X-V (CW MODE 9 kHz ~ 4 GHz /
IQ MODE 10 MHz ~ 4 GHz) Features and Benefits
• 0.01 Hz frequency setting resolution
• Level output from -110 dBm to +13 dBm
Features and Benefits
• Frequency up to 4 GHz/6 GHz • Maximum level up to +20 dBm (typ.)
• 0.001 Hz frequency setting resolution • Phase Noise: -110 dBc/ Hz @ 1 GHz , 20 kHz offset (typ.)
• High output power up to +26 dBm (typ.) • Level accuracy ≤0.7 dB (typ.)
• Phase Noise: -120 dBc/ Hz @ 1 GHz, 20 kHz offset (typ.) • Provides AM, FM, &PM analog modulation with internal, external or Int+Ext
• User flatness correction with power sensor to correct the cable loss source
• Provides AM, FM, PM analog modulation with internal, external or Int+Ext • Pulse modulation, on/off ratio ≥70 dBc
source • Pulse train generator (option)
• Single pulse, double pulse and Pulse train generator (option) • External IQ modulation with SDG6000X as the baseband IQ signal
• Internal IQ modulation with 150 MHz modulation bandwidth with perfect in- • USB-power meter measurement
factory calibration • 5 inch TFT capacitive touch screen, mouse and keyboard supported
• Internal include some digital communication stand file such as 5G-NR, LTE, • Web browser remote control on PC and mobile terminals
WCDMA, WLAN, and playback them • Standard interface include USB Host, USB Device (USB TMC), LAN (VXI-11,
• Internal Custom mode generate common IQ signal such as QAM, FSK, ASK, Socket, Telnet). Optional interface: GPIB
MSK
• Analog differential I/Q outputs
• External analog I/Q input
• USB-power meter measurement
• 5inch TFT capacitive touch screen, mouse and keyboard supported
• Web browser remote control on PC and mobile terminals
• Standard interface included USB Host, USB Device (USB TMC), LAN (VXI-11,
Socket, Telnet). Optional interface: GPIB

www.siglent.com 21
Probes and Accessories

Type Model Picture Specifications

PB470, 70 MHz bandwidth
PB470
PP510, 100 MHz bandwidth
PP510
PP215, 200 MHz bandwidth
PP215
1 X/10 X decay, 1 M/10 Mohm, 300 V/600 V
Passive Probe

10X CAT II 1000 V, CAT III 600 V, 250 MHz-bandwidth, SHS1000 handheld
PB925
oscilloscope option

SAP1000 Active Probe, 1 GHz

SAP2500 Active Probe, 2.5 GHz

Active Probe SAP2500D Differential Active Probe, 2.5 GHz

SAP5000D Differential Active Probe, 5 GHz

4 GHz power rail probe; low frequency resistance 20 kΩ; high frequency
SAP4000P resistance 50 Ω; offset voltage range ±24 V; attenuation ratio 1.1:1; dynamic
range ±600 mV

Bandwidth: DC-600 kHz ; Current Range: L (50 mA~10 A Peak),

H(1 A~100 A Peak); Attenuation accuracy L (0.1 V/A), H (0.01 V/A); Typical
CPL5100 DC precision: L (3%±50 mA), H(500 mA~40 A Peak : 4%±50 mA; 4 0A~100
A Peak : ±15% Maximum); Rise Time: ≤583 ns; Operating voltage RMS:
CATI 600 V CATII 600 V CATIII 300 V; 9 V alkaline layer-built battery/ 15H

Bandwidth: 100 kHz; Maximum continuous current 20 Arms; Peak current 60

A; Switching ratio: 50 m /A; 5 mV/A;
CP4020
DC measurement accuracy: 50 mV/A (0.4 A-10 ApK) ± 2%; 5 mV/A
(1 A-60 ApK)±2%; 9 V battery-powered

Bandwidth: 1 MHz; Maximum continuous current 50 Arms;

Peak current 140 A; Switching ratio: 500 mV/A; 50 mV/A;
Current Probe CP4050 DC measurement accuracy: 500 mV/A (20 mA-14 ApK) ±3%±20 mA;
50 mV/A (200 mA-100 ApK )±4%± 200 mA;
50 mV/A (100 A-140 ApK)±15% max; 9 V battery-powered

Bandwidth: 150 KHz; Maximum continuous current 70 Arms; Peak current

200 A; Switching ratio: 50 mV/A; 5 mV/A;
CP4070
DC measurement accuracy: 50 mV/A(0.4A-10ApK)±2%; 5 mV/A
(1 A-200 ApK)±2%; 9 V battery-powered

Bandwidth: 300 kHz; Maximum continuous current 70 Arms; Peak current

200 A;Switching ratio：100 mV/A;10 mV/A;
CP4070A DC measurement accuracy：100 mV/A (50 mA-10 ApK) ±3%±50 mA;
10 mV/A (500 mA-40 ApK) ±4%±50 mA;
10 mV/A (40 A-200 ApK) ±15% max; 9 V battery-powered

www.siglent.com 22
Type Model Picture Specifications

Frequency is determined by oscilloscope. Isolated USB function/arbitrary

USB AWG
SAG1021I waveform generator, 125 Msa/s, 16 kpts Arb Wave Length, Insulation Voltage,
Module
±42 Vpk(Hardware)

BAG-H2 Soft Carry Case for SHA860A, SHA850A, SHN900A

Soft Carry Case for SDS1000DL+/CML+, SDS1000X, SDS1000X-E, SDS2000X-E

Carry Bag BAG-S1
Series

Soft Carry Case for SDS2000X, SDS2000X Plus, SDS2000X HD, SDS5000X HD,
BAG-S2
SDS5000L, SDS5000X, SSA3000X, SSA3000X Plus, SVA1000X, SSA3000X-R

Bandwidth: 50 MHz; Maximum continuous current 30 Arms; Peak current 50 A;

Switching ratio: 5 A/30 A;
SCP5030
Accuracy: 5 A(±1%±1 mA); 30 A(±1%±10 mA); Powered by oscilloscope via
SAPBUS

Bandwidth: 100 MHz; Maximum continuous current 30 Arms; Peak current 50

A; Switching ratio: 5 A/30 A;
SCP5030A
Accuracy: 5 A(±1%±1 mA); 30 A(±1%±10 mA); Powered by oscilloscope via
SAPBUS

Bandwidth: 12 MHz; Maximum continuous current 150 Arms; Peak current

300 A; Switching ratio: 30 A/150 A;
SCP5150
Accuracy: 30 A(±1%±10 mA); 150 A(±1%±100 mA); Powered by oscilloscope
via SAPBUS

Bandwidth: 2 MHz; Maximum continuous current 500 Arms; Peak current 750
A; Switching ratio: 75 A/500 A;
SCP5500
Accuracy: 75 A(±1%±10 mA); 500 A(±1%±100 mA); Powered by oscilloscope
via SAPBUS
Current Probe
Bandwidth: 50 MHz; Maximum continuous current 30 Arms; Peak current 50 A;
Switching ratio: 5 A/30 A;
CP6030
Accuracy: 5 A(±1%±1 mA); 30 A(±1%±10 mA); Standard DC12 V/1 A power
adapter

Bandwidth: 100 MHz; Maximum continuous current 30 Arms; Peak current 50

A; Switching ratio: 5 A/30 A;
CP6030A
Accuracy: 5 A(±1%±1 mA); 30 A(±1%±10 mA); Standard DC12 V/1 A power
adapter

Bandwidth: 12 MHz; Maximum continuous current 150 Arms; Peak current

300 A; Switching ratio: 30 A/150 A;
CP6150
Accuracy: 30 A(±1%±10 mA); 150 A(±1%±100 mA); Standard DC12 V/1 A
power adapter

Bandwidth: 5 MHz; Maximum continuous current 500 Arms; Peak current 750
A; Switching ratio: 75 A/500 A;
CP6500
Accuracy: 75 A(±1%±10 mA); 500 A(±1%±100 mA); Standard DC12 V/1 A
power adapter

www.siglent.com 23
 Type Model Picture Specifications

Bandwidth: 50 MHz; Maximum continuous current 30 Arms; Peak current 50 A;

Switching ratio: 5 A/30 A;
CP6030
Accuracy: 5 A(±1%±1 mA); 30 A(±1%±10 mA); Standard DC12 V/1 A power
adapter

Bandwidth: 100 MHz; Maximum continuous current 30 Arms; Peak current 50

A; Switching ratio: 5 A/30 A;
CP6030A
Accuracy: 5 A(±1%±1 mA); 30 A(±1%±10 mA); Standard DC12 V/1 A power
adapter
Current Probe
Bandwidth: 12 MHz; Maximum continuous current 150 Arms; Peak current
300 A; Switching ratio: 30 A/150 A;
CP6150
Accuracy: 30 A(±1%±10 mA); 150 A(±1%±100 mA); Standard DC12 V/1 A
power adapter

Bandwidth: 5 MHz; Maximum continuous current 500 Arms; Peak current 750
A; Switching ratio: 75 A/500 A;
CP6500
Accuracy: 75 A(±1%±10 mA); 500 A(±1%±100 mA); Standard DC12 V/1 A
power adapter

Bandwidth: 50 MHz; Rise Time ≤7 ns; DC Accuracy ±2%; Max Input: 600 V
CATIII, 1000 V CATII; Max Differential Test Voltage (DC + Peak AC): 50 X:
DPB1300
±130 V, 500 X: ±1300 V. Input impedance/capacitance: 5 MΩ/<4 pF(Single-
ended), 10 MΩ/< 2 pF(Two inputs); DC 12 V/1.2 A Power

Bandwidth: 50 MHz; Maximum input differential voltage 800 V (DC + Peak

DPB4080 AC); Range selection (attenuation ratio):10 X/100 X; Accuracy: ±1%;
Standard DC 9 V/1 A power adapter

Bandwidth: 70 MHz; Maximum input differential voltage 1500 V (DC +

DPB5150 Peak AC); Range selection (attenuation ratio): 50 X/500 X; Accuracy: ±2%;
Standard 5 V/1 A USB power adapter

Bandwidth: 100 MHz; Maximum input differential voltage 1500 V (DC +

DPB5150A Peak AC); Range selection (attenuation ratio): 50 X/500 X; Accuracy: ±2%;
Standard 5 V/1 A USB power adapter
High Voltage
Differential
Probe
Bandwidth: 70 MHz; Maximum input differential voltage 7000 V (DC + Peak
DPB5700 AC); Range selection (attenuation ratio): 100 X/1000 X; Accuracy: ±2%;
Standard 5 V/1 A USB power adapter

Bandwidth: 100 MHz; Maximum input differential voltage 7000 V (DC + Peak
DPB5700A AC);Range selection (attenuation ratio): 100 X/1000 X; Accuracy: ±2%;
Standard 5 V/1 A USB power adapter

Bandwidth: 100 MHz, 50X/500X, Max. Differential Test Voltage (DC + Peak
SDP6150A
AC) ±1500 V, CATIII 600 V/CATII 1000 V, DC 5 V Power supply

Bandwidth: 400 MHz, 100X/1000X, Max. Differential Test Voltage (DC + Peak
SDP6150D
AC) ±1500 V, CATIII 600 V/CATII 1000 V, DC 5 V Power supply

www.siglent.com 24
Type Model Picture Specifications

Bandwidth: 100 MHz, 50X/500X, Max. Differential Test Voltage (DC + Peak
DPB6150A
AC) ±1500 V, 1000 V CAT III/ 600 V CAT IV

High Voltage Bandwidth: 400 MHz, 100X/1000X, Max. Differential Test Voltage (DC + Peak
Differential DPB6150D
Probe AC) ±1500 V, 1000 V CAT III/ 600 V CAT IV

Bandwidth: 1 GHz, 5X/50X, Differential Input Impedance 1 pF || 200 kΩ,

SAP1000H
Input range (DC + Peak AC) ±42 V, offset range ±42 V, SAPBus interface

High Voltage Bandwidth: 40 MHz; Maximum input differential voltage DC: 10 kV; AC(rms):
HPB4010
Probe 7 kV(sine); AC(Vpp): 20 kV(Pulse); attenuation ratio1: 1000; Accuracy: ≤3%

Bandwidth: 500 MHz, 50X, Max. Differential Test Voltage (DC + Peak AC) +/-
25 V, Isolated Voltage +/-60 kV, DC 5 V adapter or 7.4 V battery Power supply,
ODP6050B
Standard 50X/1000X/2000X/5000X attenuator.
Option 5X/10X/20X/50X/100X/200X/500X attenuator.
Optical Isolated
Voltage Probe
Bandwidth: 1 GHz, 50X, Max. Differential Test Voltage (DC + Peak AC) +/-25
V, Isolated Voltage +/-60 kV, DC 5 V adapter or 7.4 V battery Power supply,
ODP6100B
Standard 50X/1000X/2000X/5000X attenuator.
Option 5X/10X/20X/50X/100X/200X/500X attenuator.

Logic Probe SPL2016 Logic Probe, 16-channel, 500 MSa/s

www.siglent.com 25
 Type Model Picture Specifications

MSO function hardware for SDS2000X-E oscilloscope, 16-channel, 500 MSa/s,

Logic Analyzer SLA1016
14 Mpts

Three magnetic field near-field probes and one electric field near field probe;
Near-Field Frequency range: 30 MHz~3 GHz; resolution 25 mm; distinguished within
SRF5030T
Probe 10 cm range of the magnetic field; for EMI radiation interference and the
intensity detector

Deskew Fixture DF2001A Deskew fixture for voltage and current probes

N-BNC-2L N-BNC cable, 2 GHz bandwidth

N-N-6L N-N cable, 6 GHz bandwidth

N-SMA-6L N-SMA cable, 6 GHz bandwidth

N-N-18L N(M)-N(M) cable, 18 GHz

N-SMA-18L N(M)-SMA(M) cable, 18 GHz

Cable SMA-SMA-18L SMA(M)-SMA(M) cable, 18 GHz

SMA-SMA-26L SMA(M)-SMA(M) cable, 26 GHz

SMAF-SMA-26L SMA(F)-SMA(M) cable, 26 GHz

2.92F-2.92F-40A 2.92 mm Female - 2.92 mm Female adaptor, 40 GHz

V26-N35MN35F-25IN NMD 3.5 mm male - NMD 3.5 mm female; 26.5 GHz; length 25''/635 mm

V26-N35FA35F-25IN NMD 3.5 mm female - APC 3.5 mm female; 26.5 GHz; length 25''/635 mm

www.siglent.com 26
Type Model Picture Specifications

GPIB USB-GPIB USB-GPIB Adapter, USB Device expanded into GPIB interface

Isolated Front USB 5V power supply, plug and play, the maximum input voltage 600Vp-p,
ISFE
End floating test. Work with oscilloscopes

STB Test board STB-3 For experimental teaching and product demos

FX-USB2 USB 2.0 test fixture

Test fixture FX-ETH 100Base-TX & 1000Base-T compliance test fixture

FX-AMETH 100Base-T1 & 1000Base-T1 compliance test fixture

Rackmount kit for two intruments ,SDG800, SDG1000X, SDG2000X,

SDG-2-RMK SDG5000,SDG6000X series generators and SDM digital multimeters;
Height 3U

Rackmount kit , compatible with the SDS800X HD, SDS1000X-E, SDS1000X-U,

SDS1X-E-RMK
SDS2000X-E model; Height 4U

Rackmount kit, compatible with SDG800, SDG1000X, SDG1000X Plus,

SDG-RMK SDG2000X, SDG5000, SDG6000X series generators and SDM digital
multimeters, SDL1000X load; Height 3U

Rack Mount

Rackmount kit , compatible with the SSA3000X, SSA3000X Plus, SVA1000X,

SSA-RMK
SSA3000X-R model; Height 6U

SSG-RMK Rack Mount kit; SSG3000X, SSG5000X, SSG5000A, SDG7000A; Height 3U

Rack Mount kit for SDS1000X HD, SDS2000X HD, SDS3000X HD; Height
SDS2000 HD-RMK
6U(exactly 260 mm)

www.siglent.com 27
 Type Model Picture Specifications

SPD3000-RMK Rackmount kit , compatible with the SPD3000X/X-E/D/S/C models, Height 4U

SPS5000X-RMK SPS5000X EIA Standard rack, Height 3U

Rackmount kit is designed for use with only one instrument, is compatible
SDS2000-RMK
with the SDS2000,SDS2000X, SDS2000X Plus series Oscilloscope; Height 6U

Rack Mount

SDS5000X-RMK Rack Mount kit for SDS5000X; Height 6U

SDS6000-RMK Rack Mount kit for SDS6000A, SNA5000A, SSA5000A; Height 7U

SSG6000A-RMK Rack Mount kit; SSG6000A; Height 2U

Mechanical Calibration Kit: Open (M), Short (M), Match (M,50), Through (F-F),
F503ME
4.5 GHz

F503FE Mechanical Calibration Kit: OSLT, DC - 4.5 GHz, N-Female connector

F504MS Mechanical Calibration Kit: OSLT, DC - 9 GHz, N-Male connector

F504FS Mechanical Calibration Kit: OSLT, DC - 9 GHz, N-Female connector

F504TS Mechanical Calibration Kit: OSLT, DC - 9 GHz, N-Male and Female connector

F505TS Mechanical Calibration Kit: OSLT, DC - 18 GHz, N-Male and Female connector

Mechanical Calibration Kit: OSLT, DC - 4.5 GHz, 3.5 mm SMA-Male

F603ME
VNA Calibration connector
Kit
Mechanical Calibration Kit: Open (M), Short (M), Match (M,50), Through (F-F),
F603FE
4.5 GHz, SMA-type

Mechanical Calibration Kit: OSLT, DC - 9 GHz, 3.5 mm SMA-Male

F604MS
connector

Mechanical Calibration Kit: OSLT, DC - 9 GHz, 3.5 mm SMA-Female

F604FS
connector

Mechanical Calibration Kit: OSLT, DC - 9 GHz, 3.5 mm-Male and Female

F604TS
connector

Mechanical Calibration Kit: OSLT, DC - 27 GHz, 3.5 mm-Male and Female

F606TS
connector

KWR42A 50Ω Waveguide Calibration kit, 18 - 26.5 GHz

www.siglent.com 28
Type Model Picture Specifications

Y504MS Integrated Mechanical Calibration Kit: OSLT, DC - 9 GHz, N-Male

VNA Calibration
Kit

Y504FS Integrated Mechanical Calibration Kit: OSLT, DC - 9 GHz, N-Female

Increase the voltage and current output capabilities to generators like the
SIGLENT SDG family.
Typical Input Impedance: 15 kΩ
Input:
+/- 6.5 V Vpp (Gain: X1)
+/- 1.3 V (Gain: X10)
Amplifier SPA1010
Gain: Switched 10 V/1 V and 10 V/10 V
Output Voltage: 25.4 Vpp
Output Current: 1.12 A
Slew Rate: ≥ 90 V/μs
Overshoot: ≤ 4%
Compatible with all SIGLENT SDG series generators

Synchronous
SYN64 64 synchronous module
Module

ANT-GPS1 GPS antenna, SMA(M), 100 cm

Directional Antenna Suit, N type,

ANT-DA11 antenna (10 MHz~200 MHz),
ANT-DA1 ANT-DA12 antenna (200 MHz~500 MHz),
ANT-DA13 antenna (500 MHz~8 GHz),
Amplifier handle 12dB@1GHz(typ.)

Contains amplifier handle and 10 MHz ~ 200 MHz antenna. Antenna gain
Antenna ANT-DA11 10 dB (typical value); SWR <1:1.9 (typical value); 50 Ω/N type, female;
polarization direction horizontal and vertical

Contains amplifier handle and 200 MHz ~ 500 MHz antenna. Antenna gain
ANT-DA12 10 dB (typical value); SWR <1:1.9 (typical value); 50 Ω/N type, female;
polarization direction horizontal and vertical

Contains amplifier handle and 500 MHz ~ 8 GHz antenna. Antenna gain 10 dB
ANT-DA13 (typical value); SWR <1:1.9 (typical value); 50 Ω/N type, female; polarization
direction horizontal and vertical

Board integrated with RF components like amplier, mixer, filter for vector
RF Test board SNA-TB01
network analyzer demonstration

www.siglent.com 29
 Type Model Picture Specifications

ADP-18 Adjustable differential TDR probe DC~18 GHz

ADP-26 Adjustable differential TDR probe DC~26.5 GHz

TDR Probe

ASP-18 Adjustable single-end TDR probe DC~18 GHz

ASP-26 Adjustable single-end TDR probe DC~26.5 GHz

SSM5122A 2 input ports, 12 output ports, 3.5 mm female, 9 kHz~9 GHz

SSM5124A 2 input ports, 24 output ports, 3.5 mm female, 9 kHz~9 GHz

SSM5142A 4 input ports, 12 output ports, 3.5 mm female, 9 kHz~9 GHz

Switch Matrix

SSM5144A 4 input ports, 24 output ports, 3.5 mm female, 9 kHz~9 GHz

SSM5321A 2 input ports, 6 output ports, 3.5 mm female, 100 kHz~26.5 GHz

SSM5342A 4 input ports, 12 output ports, 3.5 mm female, 100 kHz~26.5 GHz

SSA3000X Utility Kit for SSA3000X Series: N (M) -SMA (M) cable, N (M) -N (M) cable, N (M)
UKitSSA3X
Utility Kit -BNC (F) adaptor (2 pcs), N (M) -SMA (F) adaptor (2 pcs), 10 dB attenuator;

Rechargeable
10V8_BAT 10.8V, 74 Wh
lithium battery

AC-DC adapter 12V_AP_4A 12V, 4A

Reflection RB (1 MHz~2.5 GHz), N (M) -N (M) adaptor (2 pcs), for SSA3000X,

RB3X25
Bridge SSA3000X Plus series

A comprehensive PC-based software for general and standards-based signals

PC Software SigIQPro
creation, supporting 5G NR, LTE, WLAN, Bluetooth, IoT, Custom OFDM, etc.

Noise Source
NSD28 Noise source driver, connect spectrum analyzer to noise source
Driver

www.siglent.com 30
Type Model Picture Specifications

SEM5002A 2 ports, 9 kHz~4.5 GHz, SMA female

SEM5012A 2 ports, 9 kHz~9 GHz, SMA female

SEM5022A 2 ports, 100 kHz~13.5 GHz, 3.5 mm female

SEM5032A 2 ports, 100 kHz~26.5 GHz, 3.5 mm female

VNA Calibration
Kit
SEM5004A 4 ports, 9 kHz~4.5 GHz, SMA female

SEM5014A 4 ports, 9 kHz~9 GHz, SMA female

SEM5024A 4 ports, 100 kHz~13.5 GHz, 3.5 mm female

SEM5034A 4 ports, 100 kHz~26.5 GHz, 3.5 mm female

SSU5181A DC~18 GHz, including one SPDT mechanical switch, SMA female

SSU5182A DC~18 GHz, including two SPDT mechanical switchs, SMA female

SSU5183A DC~18 GHz, including three SPDT mechanical switchs, SMA female

SSU5184A DC~18 GHz, including four SPDT mechanical switchs, SMA female

SSU5261A DC~26.5 GHz, including one SPDT mechanical switch, SMA female

SSU5262A DC~26.5 GHz, including two SPDT mechanical switchs, SMA female

SSU5263A DC~26.5 GHz, including three SPDT mechanical switchs, SMA female
Mechanical
Switch
SSU5264A DC~26.5 GHz, including four SPDT mechanical switchs, SMA female

SSU5265A DC~26.5 GHz, including one SP6T mechanical switch, SMA female

SSU5266A DC~26.5 GHz, including two SP6T mechanical switchs, SMA female

SSU5501A DC~50 GHz, including one SPDT mechanical switch, 2.4 mm female

SSU5502A DC~50 GHz, including two SPDT mechanical switchs, 2.4 mm female

SSU5503A DC~50 GHz, including three SPDT mechanical switchs, 2.4 mm female

SSU5504A DC~50 GHz, including four SPDT mechanical switchs, 2.4 mm female

www.siglent.com 31
About SIGLENT

SIGLENT is an international high-tech company, concentrating on R&D, sales,

production and services of electronic test & measurement instruments.

SIGLENT first began developing digital oscilloscopes independently in 2002. After

more than a decade of continuous development, SIGLENT has extended its product
line to include digital oscilloscopes, isolated handheld oscilloscopes, function/arbitrary
waveform generators, RF/MW signal generators, spectrum analyzers, vector network
analyzers, digital multimeters, DC power supplies, electronic loads and other general
purpose test instrumentation. Since its first oscilloscope was launched in 2005,
SIGLENT has become the fastest growing manufacturer of digital oscilloscopes. We
firmly believe that today SIGLENT is the best value in electronic test & measurement.

Headquarters:
SIGLENT Technologies Co., Ltd
Add: Bldg No.5, Antongda Industrial Zone, 3rd
Liuxian Road, Bao'an District, Shenzhen,
518101, China
Tel: + 86 755 3688 7876
Fax: + 86 755 3359 1582
Email: [email protected]
Website: int.siglent.com

North America:
SIGLENT Technologies NA, Inc
Add: 6557 Cochran Rd Solon, Ohio 44139
Tel: 440-398-5800
Toll Free:877-515-5551
Fax: 440-399-1211
Email: [email protected]
Website: www.siglentna.com

Europe:
SIGLENT Technologies Germany GmbH
Add: Staetzlinger Str. 70
86165 Augsburg, Germany
Tel: +49(0)-821-666 0 111 0 Follow us on
Fax: +49(0)-821-666 0 111 22 Facebook: SiglentTech
Email: [email protected]
Website: www.siglenteu.com

Malaysia:
SIGLENT Technologies (M) Sdn.Bhd
Add: NO.6 Lorong Jelawat 4
Kawasan Perusahaan Seberang Jaya
13700, Perai Pulau Pinang
Tel: 006-04-3998964
Email: [email protected]

modification date：2025-06
Website: int.siglent.com