Safety Data Sheet

According to Hazard Communication Standard (29 CFR 1910.1200)

L-CKD 220 Heavy Duty Industrial Gear Oil
Version 1.0
Issue date: 07/24/2020
Revision date: 07/24/2020 SDS record number: CSSS-TCO-010-141673

1. Product and Company Identification

Material name L-CKD 220 Heavy Duty Industrial Gear Oil
CAS # See section 3
Product code 60205841
Product use Suitable for lubrication of various closed gear transmission system working in severe
conditions in such industries as steel, cement, power, mining and so on; Suitable for
circulation lubrication system combined spur gear, bevel gear, spiral bevel gear and
bearing.
Manufacturer/Supplier
Supplier(Manufacturer): SINOPEC LUBRICANT CO., LTD.
Address: No. 6 Anning Zhuang West Road, Haidian District, Beijing, P.R.China
Contact person(E-mail): [email protected]
Telephone: 00-86-95388-3
Fax: 86-10-82410856
Emergency telephone Number: 00-86-95388-3

2. Hazards identification
GHS classification
Physical hazards Not classified
Health hazards Not classified
Environmental hazards Not classified
GHS label elements
Hazard Pictograms No hazard pictogram is used.
Signal word No signal word is used.
Hazard statement Not applicable.
Precautionary statement
Prevention Not applicable.
Response Not applicable.
Storage Not applicable.
Disposal Not applicable.
Other hazards Not available.

3. Composition / Information on Ingredients

Components CAS# Percent
Highly refined mineral oil Mixture 95- 99%weight
Compound additive Mixture 1-5%weight
distillates (petroleum), solvent dewaxed heavy
64742-65-0 0.01-0.1%weight
paraffinic
distillates (petroleum), hydrotreated heavy
64742-54-7 0.01-0.1%weight
paraffinic

4. First Aid Measures

Material name: L-CKD 220 Heavy Duty Industrial Gear Oil SDS US
Version #:1.0 Revision date:07-24-2020. Issue date: 07-24-2020. 1 / 6
 First aid procedures
Eye contact No specific first aid measures are required. As a precaution, remove contact lenses,
if worn, and flush eyes with water.
Skin contact No specific first aid measures are required. As a precaution, remove clothing and
shoes if contaminated. To remove the material from skin, use soap and water.
Discard contaminated clothing and shoes or thoroughly clean before reuse.
Inhalation No specific first aid measures are required. If exposed to excessive levels of
material in the air, move the exposed person to fresh air. Get medical attention if
coughing or respiratory discomfort occurs.
Ingestion No specific first aid measures are required. Do not induce vomiting. As a precaution,
get medical advice.
Notes to physician Treat symptoms.

5. Fire Fighting Measure

Flammable properties Not available.
Extinguishing media
Suitable extinguishing media Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames.
Unsuitable extinguishing media Not available.
Firefighting equipment/instructions This material will burn although it is not easily ignited. For fires involving this
material, do not enter any enclosed or confined fire space without proper protective
equipment, including self-contained breathing apparatus.
Hazardous combustion products Carbon monoxide, carbon dioxide, and unidentified organic compounds.

6. Accidental Release Measures

Personal precautions Eliminate all sources of ignition in vicinity of spilled material.
Environmental precautions Do not let product enter drains.
Methods for cleaning up Stop the source of the release if you can do it without risk. Contain release to prevent
further contamination of soil, surface water or groundwater. Clean up spill as soon
as possible, observing precautions in Exposure Controls/Personal Protection. Use
appropriate techniques such as applying non-combustible absorbent materials or
pumping. Where feasible and appropriate, remove contaminated soil. Place
contaminated materials in disposable containers and dispose of in a manner
consistent with applicable regulations.

7. Handling and Storage

Handling Avoid contaminating soil or releasing this material into sewage and drainage
systems and bodies of water. Electrostatic charge may accumulate and create a
hazardous condition when handling this material. To minimize this hazard, bonding
and grounding may be necessary but may not, by themselves, be sufficient. Review
all operations which have the potential of generating and accumulating an
electrostatic charge and/or a flammable atmosphere (including tank and container
filling, splash filling, tank cleaning, sampling, gauging, switch loading, filtering,
mixing, agitation, and vacuum truck operations) and use appropriate mitigating
procedures. For more information, refer to OSHA Standard 29 CFR 1910.106,
'Flammable and Combustible Liquids', National Fire Protection Association (NFPA
77, 'Recommended Practice on Static Electricity', and/or the American Petroleum
Institute (API) Recommended Practice 2003, 'Protection Against Ignitions Arising
Out of Static, Lightning, and Stray Currents'. Container is not designed to contain
Material name: L-CKD 220 Heavy Duty Industrial Gear Oil SDS US
Version #:1.0 Revision date: 07-24-2020. Issue date: 07-24-2020. 2 / 6
 pressure. Do not use pressure to empty container or it may rupture with explosive
force. Empty containers retain product residue (solid, liquid, and/or vapor) and can
be dangerous. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose
such containers to heat, flame, sparks, static electricity, or other sources of ignition.
They may explode and cause injury or death. Empty containers should be
completely drained, properly closed, and promptly returned to a drum reconditioner
or disposed of properly.
Storage Keep container tightly closed in a dry and well-ventilated place.

8. Exposure Controls / Personal Protection

Occupational exposure limits
US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000)
Components Type Value Form
distillates (petroleum), solvent PEL 5 mg/m3 Mist.
dewaxed heavy paraffinic (CAS 2000 mg/m3
64742-65-0) 500 ppm
US. ACGIH Threshold Limit Values
Components Type Value Form
distillates (petroleum),hydrotreated TWA 5 mg/m3 Inhalable fraction.
heavy paraffinic (CAS 64742-54-7)
distillates (petroleum), solvent TWA 5 mg/m3 Inhalable fraction.
dewaxed heavy paraffinic (CAS
64742-65-0)
US. NIOSH: Pocket Guide to Chemical Hazards
Components Type Value Form
distillates (petroleum), solvent Ceiling 1800 mg/m3
dewaxed heavy paraffinic (CAS STEL 10 mg/m3 Mist.
64742-65-0)
Biological limit values No biological exposure limits noted for the ingredient(s).
Appropriate engineering controls: Handle in accordance with good industrial hygiene and safety practice. Wash
hands before breaks and at the end of workday.
Individual protection measures, such as personal protective equipment:
Eye / face protection No special eye protection is normally required. Where splashing is possible, wear
safety glasses with side shields as a good safety practice.
Skin protection No special protective clothing is normally required. Where splashing is possible,
select protective clothing depending on operations conducted, physical
requirements and other substances in the workplace. Suggested materials for
protective gloves include: Neoprene, Nitrile Rubber.
Respiratory protection No respiratory protection is normally required. No respiratory protection is ordinarily
required under normal conditions of use. In accordance with good industrial hygiene
practices, precautions should be taken to avoid breathing of material. If user
operations generate an oil mist, determine if airborne concentrations are below the
occupational exposure limit for mineral oil mist. If not, wear an approved respirator
that provides adequate protection from the measured concentrations of this
material. For air-purifying respirators use a particulate cartridge. Use a positive
pressure air-supplying respirator in circumstances where air-purifying respirators

Material name: L-CKD 220 Heavy Duty Industrial Gear Oil SDS US
Version #:1.0 Revision date: 07-24-2020. Issue date: 07-24-2020. 3 / 6
 may not provide adequate protection.
General hygiene Wash hands, forearms and face thoroughly after handling chemical products,
considerations before eating, smoking and using the lavatory and at the end of the working
period.

9. Physical & Chemical Properties

Appearance
Physical state Liquid
Form Liquid
Color Light to Brown
Odor Petroleum odor
Odor threshold Not available
pH Not available
Vapor pressure <0.01 mmHg Maximum @ 37.8 °C(100 °F)
Vapor density >1 Minimum
Boiling point >280 °C(536 °F)
Freezing Point -9 °C(15.8 °F)
Melting point/Freezing point Not available
Solubility (water) Soluble in hydrocarbon solvents; insoluble in water.
Density 0.88-0.93 kg/l @ 20°C (68°F) (Typical)
Flash point (Cleveland Open Cup) 200 °C (356 °F) Minimum
Partition coefficient Not available
Flammability limits in air, upper, %by volume Not available
Flammability limits in air, lower, % by volume Not available
Auto-ignition temperature Not available
VOC Not available
Percent volatile Not available
Molecular Formula Not available
Molecular Weight Not available
Other data
Viscosity 198 mm2/s ~ 242 mm2/s @ 40°C (104°F) Minimum
Dissociation constant Not available
Pour Point: Not available

10. Chemical Stability & Reactivity Information

Reactivity The substance is stable under normal storage and handling conditions.
Chemical stability Material is stable under normal conditions. May react with strong acids or strong
oxidizing agents, such as chlorates, nitrates, peroxides, etc.
Conditions to avoid Incompatible materials. Heat. Hot surfaces. Flames.
Incompatible materials Strong acids, strong oxidizing agents.
Hazardous decomposition products Carbon monoxide, carbon dioxide, and unidentified organic compounds.
Possibility of hazardous reactions No hazardous reactions known.

11. Toxicological Information

Toxicokinetics, metabolism and distribution:
Non-human toxicological data: Not available
Information on toxicological effects:
Acute toxicity:
Material name: L-CKD 220 Heavy Duty Industrial Gear Oil SDS US
Version #:1.0 Revision date: 07-24-2020. Issue date: 07-24-2020. 4 / 6
 distillates (petroleum), solvent dewaxed heavy paraffinic (CAS# 64742-65-0)
LD50(Oral, Rat): > 5 000 mg/kg bw
LD50(Dermal, Rabbit): > 5 000 mg/kg bw
LC50(Inhalation, Rat): > 5.53 mg/L, 4 h
Skin corrosion/Irritation: Not classified
Serious eye damage/irritation: Not classified
Respiratory or skin sensitization: Not classified
Germ cell mutagenicity: Not classified
Carcinogenicity: Not classified
Reproductive toxicity: Not classified
STOT- single exposure: Not classified
STOT-repeated exposure: Not classified
Aspiration hazard: Not classified

12. Ecological Information

Toxicity:
distillates (petroleum), solvent dewaxed heavy paraffinic (CAS# 64742-65-0)
Acute toxicity Time Species Method Evaluation Remarks
LL50 > 100 mg/L 96h Fish OECD 203 N/A N/A
EL50 > 10 000 mg/L 48h Daphnia OECD 202 N/A N/A
EC50 N/A 72h Algae OECD 201 N/A N/A
This material is not expected to be readily biodegradable. The biodegradability of
Persistence and degradability: this material is based on an evaluation of data for the components or a similar
material.
Bioaccumulative potential: Not available.
Mobility in soil: Not available.
Results of PBT&vPvB assessment: Not available.
Other adverse effects: Not available.

13. Disposal Considerations

Disposal instructions Dispose of contents/container in accordance with
local/regional/national/international regulations.
Contaminated packaging Since emptied containers may retain product residue, follow label warnings even
after container is emptied.
14. Transport Information
DOT
Basic shipping requirements:
UN number Not regulated
Proper shipping name Not regulated
Hazard class Not regulated
Packing group Not regulated
Environmental hazards No
IATA
UN number Not regulated
UN proper shipping name Not regulated
Transport hazard class(es) Not regulated
Packing group Not regulated

Material name: L-CKD 220 Heavy Duty Industrial Gear Oil SDS US
Version #:1.0 Revision date: 07-24-2020. Issue date: 07-24-2020. 5 / 6
 Environmental hazards No
IMDG
UN number Not regulated
UN proper shipping name Not regulated
Transport hazard class(es) Not regulated
Packing group Not regulated
Environmental hazards No

15. Regulatory Information

US federal regulations
Toxic Substances Control Act (TSCA)
TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D)
Not regulated.
CERCLA Hazardous Substance List (40 CFR 302.4)
Not listed.
SARA 304 Emergency release notification
Not regulated.
OSHA Specifically Regulated Substances (29 CFR 1910.1001-1053)
Not listed.
Superfund Amendments and Reauthorization Act of 1986 (SARA)
SARA 302 Extremely hazardous substance
Not listed.
SARA 311/312 Hazardous chemical No
SARA 313 (TRI reporting) Not regulated.
Other federal regulations
Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List
Not regulated.
Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130)
Not regulated.
Safe Drinking Water Act (SDWA) Not regulated.
US state regulations
California Proposition 65
US. California. Candidate Chemicals List. Safer Consumer Products Regulations (Cal. Code Regs, tit. 22, 69502.3,
subd. (a))
distillates (petroleum),hydrotreated heavy paraffinic (CAS 64742-54-7)
distillates (petroleum), solvent dewaxed heavy paraffinic (CAS 64742-65-0)

16. Other Information

HMIS®ratings Health: 0
Flammability: 1
Physical hazard: 0
NFPA ratings Health: 0
Flammability:1
Instability: 0
Disclaimer The information in the sheet was written based on the best knowledge and
experience currently available.
Issue date 07-24-2020

Material name: L-CKD 220 Heavy Duty Industrial Gear Oil SDS US
Version #:1.0 Revision date: 07-24-2020. Issue date: 07-24-2020. 6 / 6