23 05 29 HANGERS

23 05 48 SEISMIC

P1354A

3/8 rod size

Materials & Finishes - Standard:

Base Metal: Steel conforms to ASTM A1011 SS GR 33, A1011

HSLAS GR 45, A36, A575, A576, or A635.
Electrogalvanized (EG): Conforms to ASTM B633, Type III SC1
Unistrut Defender (DF): Conforms to ASTM A1059
Hot Dip Galvanized (HG): Conforms to ASTM A123 or A153
Perma-Green (GR): Conforms to commercial standards for
powder coating
Perma-Gold (ZD): Conforms to ASTM B633, Type II SC1
Plain (PL): No finish

Materials & Finishes - Special Metals:

Stainless Steel, Type 304 (SS): Conforms to ASTM A240 or

A276, Type 304 *
Stainless Steel, Type 316 (ST): Conforms to ASTM A240 or
A276, Type 316 *
Aluminum (AL): Conforms to ASTM B209, Type 1100F or
5052-H32 *

* These materials have different physical properties and

performance characteristics. Please contact us for design
s upport.
 HTHR

Materials:
Pro
Low Carbon Steel (Fy = duc
32,000 psi minimum, F t = tW
52,000 psi minimum) eig
Thr ht /
Finishes: Par ead Len Ft (l
tN Siz gth Fini bs/
Electrogalvanized (EG): o. e (ft) sh ft)
Conforms to ASTM B633,
Type III SC1 HTHR0 1/4" 10' EG 0.12
Unistrut Defender (DF): 25
Conforms to ASTM A1059
HTHR0 1/4" 12' EG 0.12
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -25
-------------------------------------------
Materials & Finishes - Special HTHR0 3/8" 10' EG 0.29
Metals: 37

Stainless Steel, Type 316 HTHR0 3/8" 12' EG 0.29

(SS): ASTM A240, Type 316 * 37

HTHR0 3/8" 6' DF 0.29

* These materials have 37
different physical properties
and performance HTHR0 1/2" 10' EG 0.53
characteristics. 50
Please contact us for design HTHR0 1/2" 12' EG 0.53
support. 50

HTHR0 1/2" 6' DF 0.53 3/8 rod size

50

HTHR0 5 /8 " 10' EG 0.84

62

HTHR0 3/4" 10' EG 1.24

75
 P3006 thru P3013

Materials:
Pro
Unistrut Channel Nuts are duc
manufactured from mild tW
steel cold rolled coil, and eig
after stamping and Thr ht /
machining operations are Par Use ead Pie
completed, they are case tN Wit Siz Fini ce (
hardened, assuring positive o. h e sh lbs)
biting action into the
inturned edge of the P3006 Any C # 8 - 3 2 EG 0.06
Unistrut Channel. -0832 hannel
1
/ 4" & 5 / 16" Sizes: Conforms
P3006 Any C #10-2 EG 0.06
to ASTM A1011 SS GR 33
3
/ 8", 7 / 16" & 1 / 2" Sizes: -1024 hannel 4
Conforms to ASTM A576 GR P3006 Any C 1/4"-2 EG 0.06
1015 Modified -1420 hannel 0
5
/ 8", 3 / 4" & 7 / 8"Sizes:
Conforms to ASTM A36 or P3006 Any C 1/4"-2 DF 0.07
A675 GR 60 -1420 hannel 0

P3006 Any C 1/4"-2 HG 0.07

Finishes: -1420 hannel 0

Electrogalvanized (EG): P3006 Any C M6 EG 0.07

Conforms to ASTM B633, M6 hannel
Type III SC3 P3006 Any C 1/4"-2 SS 0.07
Unistrut Defender (DF): U1420 hannel 0
Conforms to ASTM A1059
Hot Dip Galvanized (HG): P3007 Any C 5/16"-1 EG 0.06
Conforms to ASTM A153 hannel 8

P3007 Any C M8 EG 0.06

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -M8
- - - - -hannel
--------------------------------------
Materials & Finishes - Special
Metals: P3008 Any C 3/8"-1 EG 0.09
hannel 6
Stainless Steel, Type 316 P3008 Any C 3/8"-1 DF 0.1
(SS): ASTM A240, Type 316 * hannel 6
Aluminum (AL): Stainless
Steel nuts are P3008 Any C 3/8"-1 HG 0.1
r ec om me n de d fo r hannel 6
Aluminum channel.
P3008 Any C 3/8"-1 SS 0.1
U hannel 6
* These materials have
different physical properties P3009 Any C 7/16"-1 EG 0.09
and performance hannel 4 3/8 rod size
characteristics.
P3010 Any C 1/2"-13 EG 0.11
Please contact us for design
hannel
support.
Excep
t P330
0, P40
00, P4
400, P
4100

P3010 Any C 1/2"-13 DF 0.11

hannel
Excep
t P330
0, P40
00, P4
400, P
4100

P3010 Any C 1/2"-13 HG 0.11

hannel
Excep
t P330
0, P40
00, P4
400, P
4100

P3010 Any C M12 EG 0.11

M12 hannel
Excep
t P330
0, P40
00, P4
400, P
4100
 HHCS

Materials:
Pro
Screws conform to SAE duc
J429 GR 2 (exceeds ASTM tW
A307). eig
Thr ht /
Finishes: Par ead Len Pie
tN Siz gth Fini ce (
Electrogalvanized (EG): o. e (ft) sh lbs)
Conforms to ASTM B633,
Type III SC1 HHCS 1/4" 7/16" EG 0.01
Unistrut Defender (DF): 02504
Conforms to ASTM A1059 4

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -HHCS
- - - - - - -1/4"
- - - - - -3/4"
- - - - - - EG
- - - - - -0.013
-------------------
Materials & Finishes - Special 02507
Metals: 5

HHCS 1/4" 3/4" DF 0.013

Stainless Steel, Type 316 02507
(SS): ASTM A240, Type 316 * 5

* These materials have HHCS 1/4" 1" EG 0.02

different physical properties 02510
and performance 0
characteristics. HHCS 1/4" 1-1/4" EG 0.024
Please contact us for design 025125
support.
HHCS 1/4" 1-1/2" EG 0.026
02515
3/8 rod size
0

HHCS 1/4" 1-1/2" DF 0.026

02515
0

HHCS 5/16" 1-1/4" EG 0.036

031125

HHCS 3/8" 3/4" EG 0.04

03707
5

HHCS 3/8" 7/8" EG 0.044

03708
7

HHCS 3/8" 1" EG 0.045

03710
0

HHCS 3/8" 1" DF 0.045

03710
0

HHCS 3/8" 1-1/4" EG 0.053

037125

HHCS 3/8" 1-1/2" EG 0.06

03715
0

HHCS 3/8" 1-1/2" DF 0.06

03715
0

HHCS 3/8" 2" EG 0.076

03720
0

HHCS 3/8" 2-1/4" EG 0.084

03722
5

HHCS 3/8" 2-1/2" EG 0.092

03725
0

HHCS 1/2" 15/16 EG 0.091

05009
4

HHCS 1/2" 15/16" DF 0.091

05009
4

HHCS 1/2" 1-3/16" EG 0.102

050119
 P1062 thru P2490

3/8 rod size

Materials &
Finishes - Standard: Pro
duc
Base Metal: Steel conforms tW
to ASTM A1011 SS GR 33, Hol eig
A1011 HSLAS GR 45, A36, e Di ht /
A575, A576, or A635. Par Ro am Pie
Electrogalvanized (EG): tN d Si ete Fini ce (
Conforms to ASTM B633, o. ze r sh lbs)
Type III SC1
Unistrut Defender (DF): P1062 5/16" 11/32" EG 0.18
Conforms to ASTM A1059
P1062 5/16" 11/32" HG 0.191
Hot Dip Galvanized (HG):
Conforms to ASTM A123 or P1062 5/16" 11/32" GR 0.18
A153
P1062 5/16" 11/32" ZD 0.18
Perma-Green (GR):
Conforms to commercial P1062 5/16" 11/32" SS 0.18
standards for powder
P1062 5/16" 11/32" ST 0.18
coating
Perma-Gold (ZD): P1062 5/16" 11/32" AL 0.06
Conforms to ASTM B633
P1063 3/8" 7/16" EG 0.18
Type II SC1
Plain (PL): No finish P1063 3/8" 7/16" DF 0.191

P1063 3/8" 7/16" HG 0.191

Materials & Finishes - Special
Metals: P1063 3/8" 7/16" GR 0.18

P1063 3/8" 7/16" ZD 0.18

Stainless Steel, Type 304
(SS): Conforms to ASTM P1063 3/8" 7/16" SS 0.18
A240 or A276, Type 304 *
P1063 3/8" 7/16" ST 0.18
Stainless Steel, Type 316
(ST): Conforms to ASTM P1063 3/8" 7/16" AL 0.06
A240 or A276, Type 316
P1064 1/2" 9/16" EG 0.17
Aluminum (AL): Confo
to ASTM B209, Type 1100F or P1064 1/2" 9/16" DF 0.18
5052-H32 *
P1064 1/2" 9/16" HG 0.18

* These materials have P1064 1/2" 9/16" GR 0.17

different physical properties P1064 1/2" 9/16" ZD 0.17
and performance
characteristics. P1064 1/2" 9/16" SS 0.17
Please contact us for design P1064 1/2" 9/16" ST 0.17
s upport .
P1064 1/2" 9/16" AL 0.06

P1964 5/8" 11/16" EG 0.16

P1964 5/8" 11/16" HG 0.17

P1964 5/8" 11/16" ZD 0.16

P1964 5/8" 11/16" SS 0.18

P1964 5/8" 11/16" ST 0.18

P2471 3/4" 13/16" EG 0.15

P2471 3/4" 13/16" HG 0.159

P2471 3/4" 13/16" SS 0.15

P2490 7/8" 15/16" EG 0.14

P2490 7/8" 15/16" HG 0.17

Project:

Architect
/
Engineer:

Date: Phone:
 ®
15⁄8” Framing System – Pipe & Conduit Supports

PUX3834 thru PUX41810 CUSH–A–THERM™

The only airtight, crush-resistant insulation

clamp on the market.
• Maintains thermal barrier protection
• Prevents condensation
• Properly supports pipe and tube
• Absorbs vibration

Line Set HVAC

1. Insulation slides 2. Pipe hanger inserts 3. Joints are wrapped

over pipes are put in place and and sealed with
glued to insuation. ProTape.

Material Finishes
Unistrut pipe clamps, unless noted, are punch-press made from Pipe supports are available in:
hot-rolled, pickled and oiled steel plates, strip or coil, and con- • Electro-galvanized (EG), conforming to
form to ASTM specifications A1008, A575, A576, A635, or A36. ASTM B633 Type III SC1
The fitting steel also meets the physical requirements of ASTM
A1011 SS GR 33. The pickling of the steel produces a smooth • Hot-dipped galvanized (HG), conforming to
surface free from scale. ASTM A123 or A153 (hardware)

Many items are also available in stainless steel. • Perma-Green III (GR), and plain (PL).

Consult factory for ordering information.

TRUST THE ORIGINAL

Insuguard
Pipe Saddles
Insuguard is the patented, easy-to-
install pipe saddle for HVAC/R
applications. It's the proven solution to
eliminate insulation tears or costly leaks
caused by saddle failures.

// Simple tool-free installation

// Specified by leading supermarket and retail chains
// Works with all insulation products
// The original innovative design

www.armacell.com
PIPE SADDLES AND ACCESSORIES
Avoid these issues with Armacell’s Pipe movement is accommodated with Insuguard Multi saddles and adapters
complete line of pipe saddles and Insuguard’s rounded edge design that simply click in place to connect to any
accessories that eliminate common curves away from the pipe at both ends type of suspension or mounting system,
support problems AND will save time and protects the insulation when regardless of size. Both systems are
during installation. expansion or contraction occurs. compatible with adjustable InsuCover
which protects pipes.

Insuguard Insuguard Multi InsuCover

Original 1-piece pipe saddle Pipe saddle systems with Pipe cover that shields the
designed for strut interchangeable adapters top of the pipe from damage.
applications. Available in for strut, clevis, H-beam, Adjustable width, attaches
black and white. I-beam, steel angle and floor with cable ties.
mounts.
SAVE TIME WITH QUICK
AND EASY, TOOL-FREE
INSTALLATION OF
PIPE SADDLES AND
ACCESSORIES.

INSUGUARD PIPE SADDLE

SPECIFICATIONS
INSUGUARD SADDLES

Part Number Color Size: In Size: mm Length: In Length: mm

IPTBCI225B Black 2.250" 57mm 12” 305mm
IPTBCI325B Black 3.250" 82mm 12” 305mm

IPTBCI425B Black 4.250" 108mm 12” 305mm

IPTBCI525B Black 5.250" 133mm 12” 305mm

IPTBCI625B Black 6.250" 159mm 12” 305mm

IPTBCI825B Black 8.250" 209mm 12” 305mm

IPTBCI225W White 2.250" 57mm 12” 305mm

IPTBCI325W White 3.250" 82mm 12” 305mm

IPTBCI425W White 4.250" 108mm 12” 305mm
IPTBCI525W White 5.250" 133mm 12” 305mm

IPTBCI625W White 6.250" 159mm 12” 305mm

IPTBCI825W White 8.250" 209mm 12” 305mm

 MASON INDUSTRIES, Inc.
30N
JOB NAME
Manufacturers of Vibration Control Products
CUSTOMER
350 Rabro Drive 2101 W. Crescent Ave., Suite D
Hauppauge, NY 11788 Anaheim, CA 92801 CUSTOMER P.O. 1” 25mm Deflection
631/348-0282 714/535-2727 X, A, B, C, D & F
FAX 631/348-0279 FAX 714/535-5738 MASON M. Series Spring
[email protected] [email protected] Hangers
www.Mason-Ind.com DWG No.

TYPE 30N RATINGS

Type Rated Rated Spring Avg LDS
and Capacity Deflection† Constant†† Deflection Spring
Size (lbs) (kg) (in) (mm) (lbs/in) (kg/mm) (in) (mm) Color
30N-X-12 12 5 1.45 37 10 0.18 Orange
30N-X-23 23 10 1.50 38 18 0.30 Brown
Clearance
not Critical 30N-X-33 33 15 1.30 33 30 0.54 Red
URP 30N-X-54 54 24 1.40 36 45 0.80 White
30N-X-76 76 34 1.22 31 73 1.31 0.20 5 Black
Double Deflection
LDS Rubber 30N-X-113 113 51 1.20 30 113 2.04 Yellow
H 30N-X-130 130 59 1.20 30 130 2.36 Purple
Element with
projecting bushing 30N-X-175 175 79 1.20 30 175 3.16 Silver
30N-X-210 210 95 1.20 30 210 3.80 Blue
Upper and Lower 30N-A-12 12 5 1.35 34 12 0.20 Red
Rods by others 30N-A-18 18 8 1.35 34 18 0.32 Gray
LRP 30N-A-25 25 11 1.35 34 25 0.44 Orange
30N-A-41 41 19 1.53 39 35 0.63 0.35 9 Pink
LDS Rubber Spring 30N-A-56 56 25 1.49 38 49 0.88 Black
Cup with a projecting 30N-A-73 73 33 1.41 36 69 1.22 Tan
bushing to prevent
steel to steel contact 30N-A-95 95 43 1.36 35 94 1.65 Green
30N-B-138 138 63 1.67 42 105 1.88 White
30N-B-222 222 101 1.51 38 191 3.48 Blue
D 30N-B-278 278 126 1.44 37 255 4.50 0.35 9 Purple
30N-B-336 336 152 1.35 34 336 6.08 Silver
30N-B-410 410 186 1.42 36 385 6.89 Black
Rod can swing 30° 30N-B-540 540 245 1.35 34 540 9.80 Yellow
30° without contacting 30N-C-630 630 286 1.53 39 558 9.86 Gray
resilient bushing. 30N-C-800 800 363 1.40 36 800 14.32
W 0.40 10 Orange
30N-C-1010 1010 458 1.50 38 920 16.36 Green
30N-C-1265 1265 574 1.40 36 1265 22.64 Red
30N-D-1575 1575 714 1.63 41 1280 23.03
LDS stands for Low Dynamic Stiffness AASHTO Bridge 0.40 10 Pink
Bearing Natural Rubber to minimize noise and vibration 30N-D-2150 2150 975 1.43 36 2095 37.50 Purple
transmission. Maximum Dynamic Stiffness is 1.4. 30N-F-2760 2760 1252 1.40 36 2760 49.39 0.40 10 Silver
†
includes double deflection LDS Rubber element.
††
applies to spring only.
TYPE 30N DIMENSIONS
LRP - Lower Rod Penetration
D H W LRP URP MRD
Size Range URP - Upper Rod Penetration
(in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm)
MRD - Maximum Rod Diameter
30N-X-12-210 2 1/2 64 5 1/2 140 2 7/8 73 3 1/4 83 1 3/4 44 3/8 10
30N-A-12-25 2 3/4 70 6 3/4 171 3 1/4 83 3 1/4 83 2 1/4 57 5/8 16
30N-A-41-95 2 3/4 70 6 3/4 171 3 1/4 83 3 5/8 92 2 1/4 57 5/8 16 All springs have additional travel
30N-B-138-540 4 102 6 3/4 171 4 3/4 121 3 3/4 95 2 3/4 70 5/8 16 to solid equal to 50% of the Rated
30N-C-630-1265 4 3/4 121 9 229 5 1/4 133 5 127 3 1/4 83 3/4 19 Deflection. Hanger elements have
30N-D-1575-2150 4 3/4 121 12 1/2 318 5 3/4 146 7 178 4 1/4 108 7/8 22 straight line deflection curves.
30N-F-2760 6 152 14 1/2 368 6 1/4 159 7 178 5 127 7/8 22

PLAN VIEW OF HANGER LOCATIONS

__________ SPECIFIED DEFLECTION
TAG:_________________________________________________________
3 0 N /c 6 1 0 * c h 1 0 m in 1: 6:
UNIT:_________________________________________________________
2: 7:

Click with mouse for each location > 3: 8:

4: 9:
5: 10:
Sets Required:

DWN CHKD DATE DWG No.

Certification Form S-607 05/2012
 MASON INDUSTRIES, Inc. JOB NAME
Manufacturers of Vibration Control Products
350 Rabro Drive 2101 W. Crescent Ave., Suite D CUSTOMER Super
Hauppauge, NY 11788
631/348-0282
FAX 631/348-0279
Anaheim, CA 92801
714/535-2727
FAX 714/535-5738
CUSTOMER P.O.
MASON M.I.
W
[email protected] [email protected] Waffle Pad
www.Mason-Ind.com DWG. NO.

MATERIAL:
✔ Natural Rubber Load Deflection Curves
Standard Neoprene LOAD
AASHTO Bridge A (psi) (lbs / 2" sq)
70
Bearing Neoprene 125 500 120
480

60
100 400
90
360
50 DURO
80
75 300 320 (Standard
Hardness)
60
B 240
60
240
40 DURO
50 200 45 (Standard)
180 40
160 30
30
3/4" 25 100 20
120 27
107
(19mm) 80

0 .05 .10 .15 20

FULL SIZED SHEETS Maximum Load
are 18 x 18 x 3/4" (450 x 450 x 19mm) consisting of DEFLECTION (in) 0.113 20% Deflection
Recomended
81 - 2" (50mm) square modules. Maximum Load
Actual pad sizes are as scheduled below. Note: 15% Deflection
TYPE Super W Graph shown is for a single layer
LOAD RATINGS per SQUARE of 2” x 2” Super W Pad
Recommended Recommended Maximum
Load per 2×2" sq. Load per Area Load per Area
Durometer (lbs) (kg) (lbs/in²) (kg/mm2) {kPa} (lbs/in²) (kg/mm2) {kPa}
30 80 35 20 .014 138 27 .019 186
Standard 40 120 55 30 .021 207 40 .028 276
Standard 50 180 80 45 .032 310 60 .042 414
60 240 110 60 .042 414 80 .056 552
70 360 165 90 .063 621 120 .084 827

PLAN VIEW OF PAD LOCATION : Durometer of Pad Material to be: DURO

TAG : 1 : 6 :
UNIT : 2 : 7 :
3 : 8 :
Click with mouse for each location >
4 : 9 :
5 : 10 :
Sets Required:

Type SUPER W Dimensions inches (mm)

A B

DWN: CHKD: DATE: DWG. No.

Certification Form S-403 04/2009
 P2486

Finishes:
Prod
Electrogalvanized (EG): uct W
Conforms to ASTM B633, eight
Type III SC1 / Piec
Part Rod S e (lbs
No. ize Finish )

P2486 3/8" thru EG 0.16

5/8" R

Project:

Architect
/
Engineer:

Date: Phone:

Contractor:

Address:

Notes:

Approval Stamp:
 Seismic Cable Bracing

For bracing and securing suspended nonstructural equipment and components. qty 4

PRODUCT INFORMATION
Gripple Seismic Cable:
Break strength certified, pre-stretched Gripple Seismic cable. Available in
lengths of 10, 15, and 20 ft
Gripple
End Fittings: Seismic
cable
45O Eyelet, (E) Standard Bracket (S), or Double Bracket (DS)
Color Coded Tags:
Pre-assembled color coded tags for easy field verification of cable
diameter: GS10=Red; GS12=Green; GS19=Yellow; GS25=Purple
Gripple Seismic Fasteners:
Design Strength (LRFD*): GS10= 400 lbf; GS12= 945 lbf; Color
coded tag
GS19= 2,265 lbf, GS25=3,570 lbf
* Load and Resistance Factor Design
Loose Brackets:
Standard Bracket (GSS) or Retrofit Bracket (GSR)
Application: End fitting

Ideal for Transverse, Longitudinal, or 4-Way bracing of nonstructural

components and equipment requiring seismic design, especially in
essential facilities that are required for emergency operations in the Gripple
Seismic
aftermath of an earthquake. NOT suitable for use in chlorinated / Loose bracket
fastener

swimming pool environments.

MATERIAL SPECIFCATION

Cable: Break strength certified, pre-stretched Gripple Seismic cable.

Manufactured to ASTM A1023, ASTM A931.
Available in standard lengths of 10 ft, 15 ft, and 20 ft.
GS10 GS12 GS19 GS25
Cable Diameter (in.) 5
/64 /8
1 3
/16 1
/4
Strand configuration 7x7 7x7 7 x 19 7 x 19
Design Strength (LRFD*) (lbf) 400 945 2,265 3,570

End Fittings: 45O Eyelet - Zinc plated steel

Standard Bracket - AISI 1050 Steel minimum UTS 725MPa pre-attached to cable via an aluminum ferrule
Double Bracket - AISI 1050 Steel minimum UTS 725MPa pre-attached to cable via an aluminum ferrule

Seismic Housing - Type ZA2 Zinc

Fasteners: Wedge - Sintered steel hardened to min. 56 Rockwell C
Spring - Stainless Steel (Type 302)
End Cap - Type ZA2 Zinc

Loose Brackets: AISI 1050 Steel minimum UTS 725MPa

PI-SEISMIC-US >60°

Digital AUG 2022 >Max

>60° >60°
kg/lbs

www.gripple.com Gripple Inc | 1611 Emily Lane | Aurora, IL 60502 | USA

Gripple’s policy is one of continuous development and innovation.
We therefore reserve the right to alter specifications, etc. without notice. Tel +1 866 474 7753 Fax +1 800 654 0689 Email [email protected]
 Woodland Aquatic - 23Aquatic
Woodland 05 48 ~- Vibration
20 05 48 and Seismic Controls
~ Seismic

Seismic Cable Bracing

APPLICATION EXAMPLES

Transverse
Bracing Longitudinal
Bracing
4-Way
Bracing

SIZE SPECIFICATION

Seismic Dimensions
C Fastener Size A B C
B GS10 1.13” 3.36” 0.52”

GS12 1.13” 3.36” 0.52”

A GS19 1.36” 3.75” 0.56”

GS25 1.71” 4.50” 0.71”

E 45º
C
45O Eyelet Dimensions
A D Size A B Cø Dø E
B
GSE4 1” 1.90” 0.82” 0.44” 0.12”
Hole in Eyelet accommodates a 3/8” fastener

Standard Dimensions
Bracket Size A B Cø Dø E
E 45º GSS4 0.78” 1.57” 0.78” 0.49” 0.15”

A GSS5 0.82” 1.65” 0.82” 0.57” 0.15”

GSS6 0.82” 1.65” 0.82” 0.68” 0.15”

D
GSS8 0.92” 1.85” 0.92” 0.80” 0.15”
C
B GSS10 1.06” 2.12” 1.06” 1.12” 0.15”

G Retrofit Dimensions
45º Bracket
Size A B C D E F G
D
A GSR4 0.37” 2.55” 1.96” 0.51” 1.06” 0.70” 0.23”

B GSR5 0.37” 2.63” 1.96” 0.59” 1.33” 0.70” 0.23”

E
GSR6 0.37” 2.63” 1.96” 0.67” 1.33” 0.70” 0.23”

GSR8 0.41” 3.01” 2.36” 0.82” 1.41” 0.82” 0.23”

C
GSR10 0.94” 3.38” 2.36” 1.04” 1.53 0.90” 0.23”
F

PI-SEISMIC-US >60°

Digital AUG 2022 >Max

>60° >60°
kg/lbs

www.gripple.com Gripple Inc | 1611 Emily Lane | Aurora, IL 60502 | USA

Gripple’s policy is one of continuous development and innovation.
We therefore reserve the right to alter specifications, etc. without notice. Tel +1 866 474 7753 Fax +1 800 654 0689 Email [email protected]
 NATIONAL PIPE HANGER CORPORATION
FIG. 200 Adjustable Clevis Hanger

SERVICE: For the suspension of non-insulated, stationary piping services.

MATERIAL: Carbon Steel or 304/316 Stainless Steel
FINISH: Black, Electro-Galvanized or Hot-Dip Galvanized
STANDARDS: MSS SP-58 Type 1, FS WW-H-171E Type 1
APPROVALS: FM (NPS 3⁄4” - 2” galv only & 21⁄2” - 8” plain and galv), UL & ULC (NPS 21⁄2” -
8” excluding 7”)
ORDERING: Specify figure number, pipe size, material and finish. (Clevis Hangers for
20” pipe and larger are furnished with a cross rod spacer.)
PIPE WEIGHT MAX. REC.
A B C E F BOLT
SIZE EACH, LBS. LOAD, LBS.
/2
1 3
/8 111/16 21/16 5
/16 7
/16 1
/4 0.18 730
/4
3 3
/8 111/16 29/16 15/16 7
/16 1
/4 0.20 730
1 3
/8 21/16 211/16 11/4 5
/8 1
/4 0.22 730
11/4 3
/8 21/2 33/16 111/16 7
/8 1
/4 0.26 730
11/2 3
/8 27/8 311/16 21/16 11/16 1
/4 0.32 730
2 3
/8 35/16 47/16 21/2 11/4 1
/4 0.41 730
21/2 1
/2 41/2 57/8 33/8 115/16 5
/16 0.84 1130
3 1
/2 43/4 61/2 311/16 13/4 5
/16 0.94 1130
31/2 1
/2 57/8 715/16 413/16 29/16 5
/16 1.19 1350
4 5
/8 515/16 83/16 49/16 21/8 3
/8 1.32 1430
5 5
/8 511/16 87/16 45/16 17/16 1
/2 2.11 1430
6 3
/4 613/16 101/8 53/16 13/4 1
/2 2.96 1940 Line Set HVAC
7 3
/4 713/16 115/8 63/16 2 1
/2 3.24 2000
8 3
/4 81/16 127/16 61/4 17/8 5
/8 4.53 2000
10 7
/8 10 157/16 8 21/4 3
/4 8.23 3600
12 7
/8 119/16 18 99/16 213/16 3
/4 10.35 3800
14 1 129/16 199/16 109/16 29/16 7
/8 14.37 4200
16 1 1315/16 2115/16 1115/16 213/16 1 20.56 4600
18 1 16 25 137/8 33/4 1 23.07 4800
20 11/4 171/2 271/2 151/8 33/4 11/4 47.13 4800
24 11/4 193/4 313/4 173/8 4 11/4 54.00 4800
30 11/4 241/8 391/8 211/2 43/4 11/4 69.00 6000
36 11/4 29 47 233/4 61/2 11/4 86.70 6000

Pipe NJ (609) 261-5353 www.nationalpipehanger.com MD (301) 568-8805

Hangers December 22, 2022
SUBMITTAL RECORD ®
R

JOB
LOCATION
Duct Strap Submittal Form
SUBMITTED TO
SUBMITTAL PREPARED BY Hanging Strap
APPROVED BY
DATE
Coiled Galvanized Duro Strap
▪ Coiled Duro Strap is manufactured from 16, 18, 22, 24, 26, 28 and 30 gauge steel
▪ Coiled straps make it convenient to carry and easy to cut without wasting material
Item # Code Description Length
13250 GS161-200 Galvanized Duro Strap-1in. - 16ga. 200ft.
13251 GS181-200 Galvanized Duro Strap-1in. - 18ga 200ft.
13252 GS221-200 Galvanized Duro Strap-1in. - 22ga. 200ft.
13253 GS241-200 Galvanized Duro Strap-1in. - 24ga. 200ft.
13254 GS261-200 Galvanized Duro Strap-1in. - 26ga. 200ft.
13285 GS221-100 Galvanized Duro Strap-1in. - 22ga. 100ft. Coiled Duro Strap
13291 GS241-100 Galvanized Duro Strap-1in. - 24ga. 100ft.
13292 GS261-100 Galvanized Duro Strap-1in. - 26ga. 100ft.
13281 GS281-100 Galvanized Duro Strap-1in. - 28ga. 100ft.
13166 GS301-100 Galvanized Duro Strap-1in. - 30ga. 100ft.
13286 GS2215-100 Galvanized Duro Strap-1-1/2in. - 22ga. 100ft.
13294 GS2415-100 Galvanized Duro Strap-1-1/2in. - 24ga. 100ft.
13295 GS2615-100 Galvanized Duro Strap-1-1/2in. - 26ga. 100ft.
13282 GS2815-100 Galvanized Duro Strap-1-1/2in. - 28ga. 100ft.
13167 GS3015-100 Galvanized Duro Strap-1-1/2in. - 30ga. 100ft.

Flat Galvanized Hanging Strap

▪ Flat Hanging Strap is manufactured from 14, 16, 18, 20, 22, 24 and 26 gauge steel
▪ Flat Hanging Strap is sold in pre-cut lengths
Item # Code Description Length
13269 HS1410 14ga. Galvanized Hanging Strap-1in. 10ft. Flat
13270 HS1610 16ga. Galvanized Hanging Strap-1in. 10ft. Hanging
13271 HS1810 18ga. Galvanized Hanging Strap-1in. 10ft. Strap
13274 HS2010 20ga. Galvanized Hanging Strap-1in. 10ft.
13272 HS2210 22ga. Galvanized Hanging Strap-1in. 10ft.
13273 HS2410 24ga. Galvanized Hanging Strap-1in. 10ft.
13197 HS2005 20ga. Galvanized Hanging Strap-1in. 5ft. 1.5"
13057 HS1608 16ga. Galvanized Hanging Strap-1in. 8ft.
13187 HS1806 18ga. Galvanized Hanging Strap-1in. 6ft.
13280 HS2604 26ga. Galvanized Hanging Strap-1in. 4ft.

Perforated Scalloped Galvanized Hanging Strap

▪ For both HVAC and Plumbing markets. ▪ Manufactured from 24 gauge steel.
▪ Perforated with alternating different hole sizes to accommodate sheet metal screws
as well as nut and bolt combinations. Perforated
▪ The strap has an hourglass shape with no sharp edges for the contractor to get cut or snagged on. Scalloped
Item # Code Description Length Galvanized Strap
13249 PGS24 Perforated Galvanized Strap - 3/4 in. - 24ga. 100ft.

Perforated Galvanized Hanging Strap (Straight Edge)

▪ Manufactured from 26, 28 and 30 gauge steel.
▪ Perforated with a 3/16'' size hole sizes - 3-7/8" spacing between holes.
Item # Code Description Length
13339 PGS261 Perforated Galvanized Strap - 1in. - 26ga. 100ft. Perforated
13343 PGS281 Perforated Galvanized Strap - 1in. - 28ga. 100ft. Galvanized Strap
(Straight Edge)
13168 PGS301-100 Perforated Galvanized Strap - 1in. - 30ga. 100ft.
13169 PGS3015-100 Perforated Galvanized Strap - 1-1/2in. - 30ga. 100ft.

Duro Dyne Corporate Headquarters, Bay Shore, NY ®

631-249-9000 • Fax: 631-249-8346

Duro Dyne Midwest • Duro Dyne West • Duro Dyne Canada ©2021 Duro Dyne Corporation
www.durodyne.com • E-mail: [email protected] Printed in USA 4/8/21
BO050012