FH 16 4x2 Tractor - Rear Air Suspension FH 42T 6A

3414
,359

Cab 2500

Chassis Dimensions [mm]

WB Wheelbase 3500 3600 3700 3800
A Overall Chassis Length 5880 5980 6080 6180
D Center of rear axle to back of cab 2443 2543 2643 2743
N Rear Overhang (Min.) 825 825 825 825
N Rear Overhang (Max.) 1015 1015 1015 1015
F Fifth Wheel Position (EC Directive 96/53) 375 375 375 375

Chassis Weights [kg]

Front Axle 5330 5330 5330 5330
Rear Axle 1970 1980 1985 1990
Kerb Weight 7300 7310 7315 7320

Turning Diameter [mm]

Turning Circle Diameter Kerb to Kerb 12700 13100 13400 13700
Turning Circle Diameter Wall to Wall 14100 14400 14700 15000

Plated Weights [kg] Plated Design

Gross Vehicle Weight 18000 20500
Gross Combination Weight 40000 44000
Front Axle 7500 7500
Rear Axle 11500 13000

Important Notes
Chassis Dimensions Chassis weight includes oil, water, AdBlue, 0 litres fuel and without driver.
Cab Height: +375 mm for CAB-HSLP, -203 mm for CAB-LSLP, +532 mm for
Kerb weight can vary ± 3%.
CAB-XHES, +517 mm for CAB-XHSL.
Front Axle to Back of Cab: +289 mm for CAB-XHES.
Turning diameters are theoretically calculated.
D-measure includes a front clearance of 50 mm and for rigid trucks also a
subframe of 100 mm. Legal weights can differ from country to country.
Height can vary ± 20 mm for leaf and ± 10 mm for air suspension.
All dimensions are for unladen chassis and any tag axles down. Chassis height For more detailed weight information, including optional equipment weights,
used: CHH-HIGH.
ask your Volvo sales contact to enter your specification into the Volvo Weight
Height change when chassis height CHH-MED,FRAME266: 0 mm.
Information system (WIS).
Weight and dimensions are based upon the following tyres:
Do NOT use this drawing for bodybuilding. Refer to Volvo Bodybuilder
Front Axle Tyres: 315/80R22.5
Instructions and chassis assembly drawing FH42T6A.
Drive Axle Tyres: 315/80R22.5

1 (7)
Ref: FH 42T 6A 01 GBR 2025-02-19 ENG
FH 16 4x2 Tractor - Rear Air Suspension FH 42T 6A
TRUCK USE □ RSS1352B Drive axle - RSS1352B single reduction 13 tonne with
differential lock - design GCW 52 tonne
□ RC-ROUGH Road conditions - On / off-road
□ RSS1370B Drive axle - RSS1370B single reduction 13 tonne with
■ RC-SMOOT Road Conditions - Smooth
differential lock - design GCW 70 tonne
CORE COMPONENTS ■ RSS1370C Drive axle - RSS1370C single reduction 13 tonne with
differential lock - design GCW 70 tonne
□ CHH-HIGH Chassis height - High - for loading heights check the unique
BEP chassis drawing attached to this quote PACKAGES
□ CHH-LOW Chassis height - Low - for loading heights check the unique
□ NCAP2024 Euro NCAP safety package - Advanced driver assist safety
BEP chassis drawing attached to this quote
package with 5 star rating equivalence
□ CHH-MED Chassis height - Medium - for loading heights check the unique
BEP chassis drawing attached to this quote □ AIRFLOW Air flow package including roof and side air deflectors plus
chassis skirts
□ RAD-GR Rear suspension - 4 bag air - high
□ DRIV-EXT Cab package - Drive Extended
□ FH16AHSL Cab - Aero Globetrotter sleeper, all steel safety cage design
with roof mounted emergency escape hatch. □ 1LIVIN++ Sleep & Resting Package - Living one-bed ++
Designed and built to Swedish impact and ECE R29 □ 1LIVING Sleep & Resting Package - Living one-bed
regulations □ 1LIVING+ Sleep & Resting Package - Living one-bed +
□ FH16ALSL Cab - Aero low sleeper, all-steel safety cage design. □ 2LIVIN++ Sleep & Resting Package - Living two-bed ++
Built to Swedish impact and ECE R29 regulations □ 2LIVING Sleep & Resting Package - Living two-bed
□ FH16ASLP Cab - Aero sleeper, all steel safety cage design with roof □ 2LIVING+ Sleep & Resting Package - Living two-bed +
mounted emergency escape hatch.
Designed and built to Swedish impact and ECE R29 ■ INFOHIGH Media Information Platform - Medium level
regulations □ SAFE-EXT Safety Package - Extended
□ FH16AXHE Globetrotter XXL sleeper cab □ SAFE-SEL Safety Package - Select
□ FH16AXHS Cab - Aero Globetrotter XL sleeper, all steel safety cage design
with roof mounted emergency escape hatch. □ COOLCM22 Energy optimization++ package
Designed and built to Swedish impact and ECE R29
regulations CHASSIS
□ FH16HSL6 Cab - Globetrotter, all steel safety cage design with roof □ FST-AIR Front suspension type - Air
mounted emergency escape hatch. ■ FST-PAR Front suspension type - 2 leaf parabolic springs
Designed and built to Swedish impact and ECE R29 □ FST-PAR3 Front suspension type - 3 leaf parabolic springs
regulations □ FST-PL1 Front suspension type - Lightweight 2 leaf parabolic springs -
□ FH16LSL6 Low Sleeper Cab top leaf steel - lower composite
■ FH16SLP6 Cab - Sleeper, all-steel safety cage design with roof-mounted
emergency escape hatch. □ FSLS-BAS Front suspension levelling - basic stroke
Designed and built to Swedish impact and ECE R29 □ FSLS-HI Front suspension levelling - high stroke for demount operations
regulations - check with bodybuilder
□ FH16XHE6 Globetrotter XXL sleeper cab for heavy haulage applications □ FAL10.0 Front axle design capacity - 10 tonne - check tyre capacity
only ■ FAL7.5 Front axle design capacity - 7.5 tonne
□ FH16XHS6 Cab - Globetrotter XL,all steel safety cage design with roof □ FAL8.0 Front axle design capacity - 8.0 tonne - check tyre capacity
mounted emergency escape hatch. □ FAL8.5 Front axle design capacity - 8.5 tonnes
Designed and built to Swedish impact and ECE R29 □ FAL9.0 Front axle design capacity - 9.0 tonne - check tyre capacity
regulations
□ FSM-LUB Front suspension maintenance - Lubricated rear shackles on
■ EU6SCR Emission level - Euro VI step E pins and bushings
■ D17A600 Engine - D17K600 17.3 litre developing 600hp at 1700rpm ■ FSTAB Front anti-roll bar - Normal stiffness
SCR & EGR. □ FSTAB2 Front anti-roll bar - Medium stiffness
Peak torque 3000Nm at 850-1450rpm. □ FSTAB3 Front anti-roll bar - High stiffness
□ D17A700 Engine - D17K700 17.3 litre developing 700hp at 1600 to
1800rpm SCR & EGR. □ RAL11.5 Rear axle design capacity - 11.5 tonne
Peak torque 3400Nm at 950-1450rpm. ■ RAL13 Rear axle design capacity - 13 tonne
□ D17A780 Engine - D17K780 17.3 litre developing 780hp at 1700rpm
SCR & EGR. ■ RSTAB1 Rear anti-roll bar - Normal stiffness
Peak torque 3800Nm at 1000-1200rpm. □ RSTAB3 Rear anti-roll bar - Stiff

■ DIESEL Fuel Type - Diesel ■ ASF-DL3 Air suspension with 3 driving levels

□ EBR-EPG Engine brake type - Exhaust brake controlled by steering □ ACTST-TO Active Steering- Volvo Dynamic Steering - VDS - with extra
column switch electronic pump and torque overlay
□ EBR-VEB+ Engine brake type - Volvo engine brake + and exhaust □ ASFE-BAS Active steering feature - Basic - Volvo Dynamic Steering - VDS
pressure governor, enhanced performance from additional - only
exhaust rocker control. Retardation 375kW □ ASFE-OG Active steering feature - Volvo Dynamic Steering - VDS - with
■ ATO3112 Gearbox - ATO3112 12-speed I-Shift overdrive automated stability assist - oversteer
mechanical, suitable for gross train weights up to 60tonne. □ ASFE-PO Active steering feature - Volvo Dynamic Steering - VDS - with
Refer to sales engineering when used in conjunction with a personal settings and stability assist
PTO □ ASFE-PS Active steering feature - Volvo Dynamic Steering - VDS - with
□ ATO3512 Gearbox - ATO3512 12-speed I-shift automated mechanical, personal settings
suitable for gross train weights up to 60 tonne. Refer to sales □ PSP-FIX Power steering pump - Fixed displacement
engineering when used in conjunction with a PTO □ PSP-VAR Power steering pump - Variable displacement
□ ATO3812 Gearbox - ATO3812 12-speed I-Shift overdrive automated ■ PSP-VAR2 Power steering pump - Variable displacement with electronic
mechanical, suitable for gross train weights up to 60tonne. control
Refer to sales engineering when used in conjunction with a
PTO ■ EBS-MED Brake package - EBS medium including "hill" hold function

□ RSH1370F Drive axle - RSH1370F 13-tonne hub reduction with differential ■ AUXPARK Auxiliary parking brake - Additional spring brakes
lock - design GCW 70 tonne
■ RST-AIR Rear suspension type - Air

■ Standard Equipment □ Optional Equipment

For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.

For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).

The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.

2 (7)
Ref: FH 42T 6A 01 GBR 2025-02-19 ENG
FH 16 4x2 Tractor - Rear Air Suspension FH 42T 6A
□ RST-AIR6 Rear suspension type - Air with reinforced air bellows for
heavier loads at higher temperatures □ TB-R80 Toolbox 800 mm, right side

■ FRAME266 Chassis frame section external height - 266 mm □ SUP-BAS Side guards - Check with bodybuilder chassis space
□ FRAME300 Chassis frame section external height - 300 mm requirements
□ SUP-LOW EC approved low chassis side guards
□ FST6060 Chassis frame thickness - 6 mm web and flange
□ FST6565 Chassis frame thickness - 6.5 mm web and flange □ CHAIN-S Snow chains
□ FST7070 Chassis frame thickness - 7 mm web and flange □ HOOK-SC Snow chain hooks
■ FST8080 Chassis frame thickness - 8 mm web and flange
■ TOWF-NO1 Front towing device - One detachable - stored in cab
□ FIL-EEEB Chassis frame inner liner - From the end of the engine to the □ TOWF-NO2 Front towing device - Two detachable - stored in cab
end of the bogie
□ FIL-TXEB Chassis frame inner liner - From gearbox member to the end of □ TOWR-ONE Towing hitch attached to rear crossmember
the bogie
□ TREL15 Trailer electrical connection - Single 15 pin - ADR certified
□ BBOX-EF Battery box position - End of the frame in rear overhang □ TREL7 7 pole - 24N trailer electrical suzie
■ BBOX-L Battery box position - Left hand side ■ TREL7-7 Trailer electrical connection - 2 x 7 pin - 24N and 24S

□ BATS-D Dual energy battery system - 2 living batteries and 2 starter □ TBC-DUO Trailer brake connections - Duomatic type
batteries. □ TBC-EC Trailer brake connections - EC palm coupling connectors
■ BATS-S Single energy battery system (2 batteries) ■ TBC-GBR Trailer brake connections - 'C' and 'CA' type

□ 2BAT210B Battery Capacity - 2 x 210 Ah - Gel type ■ TRBR-STA Stationary trailer brake control
■ 2BAT210C Battery Capacity - 2 x 210 Ah - AGM Absorbent Glass-fibre
□ TRB-STRE Stretch Brake - Automatic low speed trailer brake activation to
Material type
avoid jack-knifing and improve steerability
■ BATTAMP Battery management - Voltage and current gauge
■ RFEND-B Rear mud wings - Three piece EC approved and spray flaps
□ BATTIND Battery management - Voltage, current and charge indicators
■ RFH-BAS Basic rear wing height
□ ADR2 ADR Adaptation - For transportation of dangerous goods on
□ RFH-HIG High rear wing height - higher wing tops
the road - Note does NOT include safe loading pass package if
□ RFH-LOW Lower rear wing height - shallower wing tops
required this is quoted separately
□ ATANK-AL Air tanks - Aluminium
□ MSWI-A Battery master switch - ADR switch circuit shut down
■ ATANK-ST Air tanks - Steel
■ MSWI-R Battery master switch - Key fob operated remote controlled
■ TL-LED Rear lights - LED
■ R330A71 Right fuel tank - 330litre aluminium diameter 710mm
Min volume 255l ■ BLIGHT-E Emergency brake light
Max volume 810l
WHEELS & TYRES
■ UL-FUEL Left fuel tank - Without
Min volume 160l □ RT-AL Wheels - Howmet Alcoa brushed aluminium rims - standard
Max volume 900l holes for long stud fixing
□ RT-AL1 Wheels - Howmet Alcoa brushed aluminium rims LVL one -
□ ADTP-BC Adblue tank position - Behind and under the cab on the right- standard holes for long stud fixing
hand side □ RT-AL1DU Wheels - Howmet Alcoa brushed aluminium rims LVL one -
□ ADTP-L Adblue tank position - Chassis mounted on the left-hand side countersunk holes for short stud fixing
■ ADTP-R Adblue tank position - Chassis mounted on the right-hand side □ RT-ALDP Wheels - Howmet Alcoa Dura-Bright aluminium rims - standard
holes for long stud fixing
□ ADB048 Plastic AdBlue tank - 48 litre □ RT-ALDPD Wheels - Howmet Alcoa Dura-Bright EVO aluminium rims -
■ ADB064 Plastic AdBlue tank - 64 litre countersunk holes for short stud fixing
□ ADB065 Plastic AdBlue tank - 65 litre under/behind the cab □ RT-ALDU Wheels - Howmet Alcoa brushed aluminium rims - countersunk
□ ADB068 Plastic AdBlue tank - 68 litre holes for short stud fixing
□ ADB083 Plastic AdBlue tank - 83 litre ■ RT-STEEL Wheels - Steel rims
□ ADB090 Plastic AdBlue tank - 90 litre
□ ADB099 Plastic AdBlue tank - 99 litre under/behind the cab □ WCAP Aerodynamic hub caps
□ ADB100 Plastic AdBlue tank - 100 litre
□ ADB112 Plastic AdBlue tank - 112 litre □ SPWT-D Spare wheel & tyre with rear tyre pattern
□ SPWT-F Spare wheel & tyre with front tyre pattern
□ ADTC-BF AdBlue tank cover with satin alloy look decorative cover
□ SWCP-LF Spare wheel carrier on left side of chassis ahead of rear axle
■ FCAP-L Diesel and AdBlue filler cap - Locking □ SWCP-RF Spare wheel carrier on right side of chassis ahead of rear axle
□ SWCP-T Spare wheel supplied temporarily strapped to chassis
■ FUFF-AS Fuel filler - Anti-spill device □ SWCP-TP Temporary spare wheel carrier on top of chassis frame
□ FUFF-ATS Fuel filler - Anti-spill & anti-syphon device
□ JACK-12T 12 tonne bottle jack
□ ESH-LEFT Exhaust - Horizontal silencer - left outlet □ JACK-15T 15 tonne bottle jack
■ ESH-REAR Exhaust - Horizontal silencer - rear outlet □ JACK-20T 20 tonne bottle jack
□ ESH-RIGH Exhaust - Horizontal silencer - right outlet
□ ESH-VERT Exhaust - Horizontal silencer - vertical outlet ■ TOOL-BAS Toolkit - Basic
□ TOOLKIT Toolkit - Complete
□ EXST-SSP Stainless steel exhaust stack - NOT polished
□ EXST-ST Steel exhaust stack □ INFLAHOS Tyre inflation hose
□ WHC-FIX1 Wheel chock - One fixed design □ GAUGE-TP Tyre pressure gauge
□ WHC-FIX2 Wheel chocks - Two fixed design
□ WHC-FOL1 One foldable wheel chock DRIVELINE EQUIPMENT
□ WHC-FOL2 Two foldable wheel chocks ■ TRAP-HD Reinforced gearbox application
□ WHCP-F Wheel chock carrier position - In the front part of the vehicle ■ DRM-BE Drive mode - Balanced & Economy
□ WHCP-M Wheel chock carrier position - Middle part of the vehicle
□ WHCP-T Wheel chock carrier position - Outer luggage locker ■ PVT-MTM I-See Predictive Cruise Control - using map-based topography
information with lower operating settings
□ TB-L80 Toolbox 800 mm, left side

■ Standard Equipment □ Optional Equipment

For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.

For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).

The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.

3 (7)
Ref: FH 42T 6A 01 GBR 2025-02-19 ENG
FH 16 4x2 Tractor - Rear Air Suspension FH 42T 6A
□ CRUIS-E Cruise control - with I-roll and I-cruise, controls in steering □ PTRD-D1 PTRD-D1 Gearbox driven HIGH SPEED PTO (1 SAE flange &
wheel 1 plug-in hydraulic pump)
■ CRUIS-E5 Eco torque software - Improved economy mode. Fuel economy □ PTRD-D2 Gearbox driven HIGH SPEED PTO (2 SAE flanges & 1 plug-in
optimized cruise control for I-Save hyd pump)
□ PTRD-F PTO with 1 DIN + 1 flange connection rear, manual gearbox
□ AMSO-AUT Enhanced I-shift software with manual shift available in auto
mode and kickdown facility on accelerator pedal □ HPG-F101 Gearbox mounted hydraulic pump - Parker F1-101 hydraulic
pump gearbox mounted
□ AVO-ENH I-Shift application software - Construction and off road □ HPG-F41 Gearbox mounted hydraulic pump - Parker F1-41 gearbox
applications mounted, fixed displacement, single flow
□ APF-ENH I-shift enhanced PTO functions □ HPG-F51 Gearbox mounted hydraulic pump - Parker F1-51 gearbox
mounted, fixed displacement, single flow
□ RET-TH Gearbox mounted retarder □ HPG-F61 Gearbox mounted hydraulic pump - Parker F1-61 gearbox
mounted, fixed displacement, single flow
□ TC-MAOH2 Extra high performance transmission oil cooler - air to oil with
□ HPG-F81 Gearbox mounted hydraulic pump - Parker F1-81 gearbox
front mounted radiator
mounted, fixed displacement, single flow
■ TC-MWO Basic transmission oil cooler - water to oil
□ STWPOS-L Steering wheel position - LEFT-HAND DRIVE
□ 2COM1100 Air compressor - Two-cylinder 1100 litres per minute
■ STWPOS-R Steering wheel position - RIGHT-HAND DRIVE
■ 2COMP900 Air compressor - Two-cylinder 900 litres per minute
■ STWM-LE Steering wheel - Leather
□ CLU-AIRC Clutchable air compressor
□ STGW-AD2 Steering wheel adjustment - Neck tilt, column height and angle
□ AIRIN-FR Front air intake fitted to the underside of cab engine tunnel
■ STGW-ADJ Steering wheel adjustment - Column height and angle
■ AIRIN-HI Air intake - Roof-mounted behind cab on the left-hand side
□ AIRIN-LO Low level air intake behind cab on left hand side ■ AIRBAG Driver air bag
□ ACL1ST-S Air filter - two-stage element ■ DRC-AMII DPF Regeneration control switch - for manual and switching off
regeneration
□ 24A150BL Alternator capacity - 150 amp
■ 24A180BL Alternator capacity - 180 amp ■ 1DAYDIG4 Smart tachograph - Continental VDO 4.1 version 2 - legal
□ 24AL150B Alternator capacity - 150 amp demand from 21/08/2023
□ CCV-C Closed crankcase engine ventilation □ ARSL Additional road speed limit - switch in dashboard
■ CCV-OX Closed crankcase ventilation for cold markets
■ ESP-BAS1 Electronic Stability Control ESC
■ PRIM-EL Electrical priming pump
□ ESPC-RO Additional ESC functions - Reduced / Off
□ AF-R Hot fuel recirculation heated fuel filter
□ HWSS-ACB Forward collision warning with adaptive cruise control and
■ FUEFE2SW Small engine mounted dual fuel filter with water separator AEBS advanced emergency brake system
■ HWSS-FCB Forward collision warning with AEBS advanced emergency
□ EST-AID Engine starting aid -Preheating element in the air inlet manifold
brake system
□ 220EBH15 220V/1.5Kw electric engine block heater
■ LSS-DW Lane departure warning system
□ PTER-100 Engine power-take-off - Rear-mounted with DIN100/ISO7646 □ LSS-DW3 Lane departure warning system with pilot assist
flange
■ LCS4 Side Collision Avoidance Support - Passenger and driver side
□ PTER-DIN Engine power-take-off - Rear-mounted with DIN5462 (female)
□ LCS5 Side Collision Avoidance Support - Active support with
splined shaft for a close-coupled pump
emergency brake on passenger side. Collision warning on
Models with 3 steering axles will use this to drive the steering
passenger and driver side
pump (AUXPSP)
□ PTER1400 Engine power-take-off - Rear-mounted with SAE 1410 flange ■ DAS-W Driver Alert Support system
□ HPE-F101 Parker F1-101,engine mounted, fixed displacement, single □ RSENS-W Rain sensing windscreen wipers
flow, engine mounted hydraulic pump
□ HPE-F41 Parker F1-41, engine mounted, fixed displacement, single flow, ■ CU-ECC Cab climate Unit - Electrically controlled air conditioning with
engine mounted hydraulic pump sun sensor
□ HPE-F51 Parker F1-51, engine mounted, fixed displacement, single flow, □ CU-ECC2 Cab climate Unit - Electrically controlled air conditioning with a
engine mounted hydraulic pump carbon filter, sun, mist, and air quality sensor
□ HPE-F61 Parker F1-61, engine mounted, fixed displacement, single flow, ■ IGT-BUT Vehicle starting - Push-button
engine mounted hydraulic pump
□ HPE-F81 Parker F1-81, engine mounted, fixed displacement, single flow, ■ IMMOBIL Immobiliser
engine mounted hydraulic pump
□ HPE-T53 Parker F2-53/53, engine mounted, Fixed displacement, Twin □ ALARM-E Vehicle alarm - Cab plus external sensor for body/trailer
flow engine mounted hydraulic pump □ AUD-EXT Extended audio - Amplifier
□ HPE-T70 Parker F2-70/35, engine mounted, Fixed displacement, Twin
flow engine mounted hydraulic pump □ PHONE-PK Telephone preparation kit (antenna, antenna attachm. cable
□ HPE-V45 Parker VP1-45, variable displacement, single flow, engine incl.)
mounted hydraulic pump
□ ISUNS-BS Side sun visor - Driver & passenger side
□ HPE-V75 Parker VP1-75, variable displacement, single flow, engine
■ ISUNS-DS Side sun visor - Driver-side
mounted hydraulic pump
□ ISUNF-RE Electrically operated textile interior sun blind
□ PTR-D Gearbox PTO for plug-in pump, 0.71xeng speed
■ ISUNF-RM Manually operated textile interior sun blind
□ PTR-DH Gearbox driven high speed PTO for one plug-in hydraulic
pump □ CSPL-BX Lower center dash open storage box
□ PTR-DM Gearbox driven medium speed PTO for one plug-in hydraulic ■ CSPL-BXD Lower centre dash drawer
pump
□ PTR-F Gearbox driven PTO with rear flange connection □ ADFS Two extra DIN slots in front shelf - can be fitted with card or
□ PTR-FH Gearbox driven high speed PTO with SAE drive flange drawer available as an accessory
□ PTR-FL Gearbox driven low speed PTO with SAE drive flange ■ BUPALARM Reverse alarm
□ PTRD-D Gearbox driven HIGH SPEED PTO for two plug-in hydraulic
pumps

■ Standard Equipment □ Optional Equipment

For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.

For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).

The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.

4 (7)
Ref: FH 42T 6A 01 GBR 2025-02-19 ENG
FH 16 4x2 Tractor - Rear Air Suspension FH 42T 6A
□ RTOLL-PK Road toll PREPARATION kit for trucks operating with "Toll □ PH-CAB2 Cab parking heater -1.8kW Air to air
Collect" in Germany □ PH-ENGCA Cab parking heater - Engine and cab
□ LOADIND Load indicator with central dashboard display □ CPC-ADV I-ParkCool - Advanced cab parking cooler with 120V DC
electrical compressor
□ REMC-MF Multi-functio wireless remote control
■ SLCP-BAS Sleeper control panel - Basic with switches for interior light,
□ FIREXT3S Fire extinguisher - 3kg mounted on the seat base night heater, roof hatch and door lock
□ WARNVEST High visibility warning vest - No sleeves □ SLCP-LUX Sleeper control panel - Luxury with switches for interior light,
night heater, roof hatch, door lock, alarm clock, window and
□ AIDKIT First aid kit - Legal demand for EU markets including delivery radio
to EU bodybuilder
□ AIDKIT1B First aid kit - Legal demand for trucks transiting Germany □ SAFE Driver's Safe Box

□ WARNLAMP Portable warning lamp □ RUS-BAS Rear cab upper storage - 300 mm high
□ RUS-HIG Rear cab upper storage - 440 mm high - volume 245 litres
□ LAMP-IN Inspection lamp
□ TABLE Bunk table - Folding and height adjustable fitted on lower bunk
□ BULBKIT Bulb and fuse kit
□ REFR-RUS Fridge - 28 litre rear upper wall mounted with dividers
■ WRITEPAD Writing pad □ REFRIG Fridge - 33 litre under-bunk mounted with freezer dividers
■ DST-CF4 Driver seat - Suspended, adjustable shock absorber, travel, □ MICRO-PK Microwave equipment - Wiring preparation kit for oven
backrest & lumbar controls with integrated seatbelt
□ DST-CF5 Driver seat - Suspended with adjustable shock absorber, □ BOTH-D Bottle holder - One under dashboard centre section
travel, backrest, lumbar & heat controls with integrated seatbelt □ BOTH-DL Bottle holders - Two. One under dashboard centre section and
□ DST-CF6 Driver seat - Suspended with adjustable shock absorber, one mounted to the under bunk drawer
travel, backrest, lumbar, heat and ventilation controls with □ BOTH-L Bottle holder - One mounted to the under bunk drawer
integrated seatbelt □ COFMA-PK Coffee maker - Preparation kit.
□ DST-LUX1 Driver seat - Deluxe 1: electrical adjustment with memory
function, lumbar support, heating & ventilation with integrated □ SOL12S Sleeper, single, 12v outlet
seatbelt
□ DST-LUX2 Driver seat - Deluxe 2: electrical adjustment with memory □ INLI-BAS Interior light - White LEDs
function, lumbar support & heating with integrated seatbelt □ INLI-NL Interior light - White and red nightlight LEDs without dimmer
■ INLI-NLD Interior light - White and red nightlight LEDs with dimmer
□ SBD-RED Seat belt colour - Red
□ ARL-FLEX Flexible reading lamps - Two "snake" type
□ SBPRE-DS Driver seat belt pretensioner
■ RH-EE Fixed tinted glass sky window with emergency exit
□ PST-BAS1 Passenger seat - Fixed non suspended fold up with seatbelt □ RH-ER Steel roof hatch - Electrically operated, rear opening with
mounted on cab "B" post emergency exit
□ PST-CF4 Passenger seat - Suspended, adjustable shock absorber, □ RH-ETR Tinted glass roof hatch - Electrically operated, rear opening
travel, backrest & lumbar controls with integrated seatbelt with emergency exit
□ PST-CF5 Passenger seat - Suspended with adjustable shock absorber, □ RH-MTR Tinted glass roof hatch - Manually operated, rear opening with
travel, backrest, lumbar & heat controls with integrated seatbelt emergency exit
□ PST-RX1 Passenger seat - Fixed non suspended, features: 90-degree
rotation and tilt function with seatbelt mounted on cab "B" post ■ GLAS-TIN Cab windows - Tinted
□ PST-STD2 Passenger seat - Fixed with backrest adjustment, non □ SWIND-BS Cab side window - On both sides behind 'B' post
suspended with seatbelt mounted on cab "B" post
■ PST-STD4 Passenger seat - Standard suspended with seatbelt mounted ■ VANMIR Vanity mirror - In front shelf
on cab "B" post
□ AS-FUS Extra shelf in front compartments
□ SBPRE-PS Passenger seat belt pretensioner
□ INFOT-PK TV mounting preparation kit - Above the driver's door, includes
■ ARMRE-BB Armrests - Two on both driver & passenger seats bracket, electrical and speaker connections

■ ARU-LEA Armrest upholstery - Leather CAB EXTERIOR

■ GRABHI-L Instep cab grab handle - Leather finish □ EXTL-BAS Basic exterior finish - Satin Volvo badges, grey grille, instep,
bumper, bumper spoiler, grille, door handles mirror housing
□ FMAT-RUB Footwell floor mats - Rubber and sunvisor if specified.
■ FMAT-TX2 Footwell floor mats - Two sets, Rubber and textile with an ■ EXTL-EN3 Enhanced exterior finish - Silver grille, Volvo badges and door
embossed pile supplied in the cab handles. Instep, bumper and bumper spoiler in cab colour with
aluminium step inserts. Mirror housings and sun visor if
■ LBK80F Lower bunk - Fixed with wide middle section 815 in the centre
specified with silver accents.
x 2000 mm
□ LBK80FRE Lower bunk - Electrically operated recliner with wide middle ■ DGLAS-H Door glass - Hardened
section 815 in the centre x 2000 mm □ DGLAS-L Door glass - Laminated
□ LBK80FRM Lower bunk - Manually operated recliner with wide middle
section 815 in the centre x 2000 mm ■ BUMP-B Front bumper - Plastic
□ BUMP-B2 Front bumper - Steel
□ MATL-FI Lower mattress - Firm pocket sprung □ BUMP-HD Front bumper - Heavy duty
□ MATL-FI4 Lower mattress - Firm, memory foam, 2000x700x130 mm
■ MATL-SF Lower mattress - Flexi-zone semi-firm, pocket springs up to □ BUMP-SP Front bumper spoiler
100kg - 16 stone □ AUXFS Lower swinging cab step
□ OLMAT-BA Mattress overlay protector - 35mm thick □ GUARD-EH Sump and radiator guard - to protect engine and hoses
■ OLMAT-PR Mattress overlay protector - Premium 50mm thick
■ BUGNET Radiator insect screen
□ TBK60AD Top bunk - Height adjustable foldable 600 x 1900mm
□ TBK60F Top bunk - Fixed foldable 600 x 1900mm □ CTILTP-E Electrically operated hydraulic cab tilt
□ TBK70AD Top bunk - Height adjustable foldable 700 x 1900mm ■ CTILTP-M Manually operated hydraulic cab tilt
□ TBK70F Top bunk - Fixed foldable 700 x 1900mm
□ FCABS-A Front cab suspension - Air

■ Standard Equipment □ Optional Equipment

For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.

For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).

The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.

5 (7)
Ref: FH 42T 6A 01 GBR 2025-02-19 ENG
FH 16 4x2 Tractor - Rear Air Suspension FH 42T 6A
■ FCABS-M Front cab suspension - Mechanical spring
□ RFCAR-BC Rear mudwing carrier, back of cab
□ RCABS-A Rear cab suspension - Air
■ RCABS-M Rear cab suspension - Mechanical spring □ LADDER Ladder back of cab

■ HCC-INEX Lockable front service hatch - Activated by door lock remote □ REFS-TW White cab conspicuity markings by packed in cab
□ REFS-TY Yellow cab conspicuity markings by packed in cab
□ MIRCFCPS Mirrors - Electrically heated and operated main and wide-angle
with manually adjusted passenger kerb and front mirror and SUPERSTRUCTURE PREPARATIONS
position camera in nearside mirror arm □ 5WM-ASL Fifth wheel mount - Air operated slider with 4mm L profiles
□ MIRCMCP Camera monitoring and mirrors - Electrically heated and □ 5WM-ASM Fifth wheel mount - Air operated slider with 50mm L profiles
operated main and wide-angle rear view cameras with □ 5WM-ISOL Fifth wheel mount - Flush L profiles with 12mm ISO plate -
manually adjusted passenger kerb and front mirror and 16mm high above chassis frame
passenger corner pedestrian camera. ■ 5WM-ISOM Fifth wheel mount - 50mm L profiles with 10mm ISO plate -
□ MIRCMS Camera monitoring and mirrors - Electrically heated and 60mm high above chassis frame
operated main and wide-angle rear view cameras with □ 5WM-LPRO Fifth wheel mount - Direct to frame with inverted 'L'-profiles
manually adjusted passenger kerb and front mirror □ 5WM-MASL Fifth wheel mount - Manual slider with 4mm L profiles
■ MIRCOMF Mirrors - Electrically heated and operated main and wide angle □ 5WM-MASM Fifth wheel mount - Manual slider with 50mm L profiles
and manually adjusted passenger kerb and front mirror
□ 5WH140 Leg-height - 140 mm
■ AMIR-F20 Auxiliary front view mirror with a 200mm radius □ 5WH150 Leg-height - 150 mm
□ 5WH160 Leg-height - 160 mm
□ SUNV-H External smoke grey sunvisor
□ 5WH175 Leg-height - 175mm
□ AD-ROOF Cab roof deflector - Adjustable □ 5WH185 Leg-height - 185 mm
□ 5WH195 Leg-height - 195mm
□ AD-SIDEL Cab side deflector - Long extension panels □ 5WH200 Leg-height - 200 mm
□ AD-SIDES Cab side deflector - Short extension panels □ 5WH205 Leg-height - 205 mm
□ AD-CHASX Chassis side skirts - extended □ 5WH210 Leg-height - 210 mm
□ 5WH220 Leg-height - 220mm
□ ADCF-F Additional black edging on chassis side skirt □ 5WH230 Leg-height - 230 mm
■ HL-LED Headlights - LED ■ 5WT-FO14 Fifth wheel - Fontaine 150SP2 pressed steel
□ HL-LED3 Headlights - LED Adaptive high beam □ 5WT-FO15 Fifth wheel - Fontaine 3000 lightweight cast air operated slider
- for moderate duty off-road.
■ HL-CLEAN Headlight cleaner - Washer jets
□ 5WT-JO10 Fifth wheel - Jost JSK 36 pressed
□ HLP-ST Headlight protection □ 5WT-JO8 Fifth wheel - Jost JSK 37 cast
□ 5WT-JO9 Fifth wheel - Jost JSK 42 cast
□ DRIVL2 Two spot lamps □ 5WT-SH Fifth wheel - SAF-Holland/+GF+ SK-S 36.20 cast
□ UDRIVL Auxiliary driving lights - Without
■ 5WLM-B Maintenance - Basic fifth wheel - standard top plate
■ FOGL-WC Front fog lights □ 5WLM-L Maintenance - Low maintenance with nylon top plate
□ CL-STAT Static corner lights □ 5WL-S1 Fifthwheel lubrication - Locking mechanism and top plate
□ 5WL-S2 Fifthwheel lubrication - Locking mechanism only
□ ASL-RF2 Integrated roof spotlights - Two LED aerodynamic spot lights in
Globetrotter sign box □ TCIND Trailer connection indicator - Sensors for height, kingpin and
coupling lock
□ BEACOA2F Roof beacons - Two front roof mounted amber LED
□ BEACOA2R Roof beacons - Two rear roof mounted amber LED ■ RDECK Catwalk - Single plate and step
□ BEACON-P Roof beacons - switch and wiring preparation only □ RDECK-M Catwalk - Extended with two plates and step
□ BEACONA4 Roof beacons - Four amber LED - two front/ two rear
□ SRWL-PK Chassis-mounted working lamps - Side work and reverse lamp
□ CABPT-R1 Single outlet for roof mounted accessories preparation and 3 position switch - Max load 280W
■ CABPT-R2 Twin outlets for roof mounted accessories. □ SWL-2RW Chassis-mounted working lamps - Two white rear mounted
LED lamps
□ SPOTP-F Spotlamp preparation in front, max 280W
□ SWL-PK Chassis-mounted working lamps - Side work lamp preparation
□ SPOTP-R Spotlamp preparation on roof, max 280W
and 2 position switch - Max load 280W
□ SPOTP-RF Spotlamp preparation on cab roof and in cab front, max
2x280W ■ WL-TA1W Coupling light - LED White
□ ROS-IL2 Preparation kit for illuminated roof sign with switch loose in □ WLC-H2W Working lamp back of cab - Two white LED high mounted at
cab, fit after registration the back of cab
□ WLC-PKH Preparation kit, cables and switch for high mounted working
□ CSGN-ENG Engine size and power headboard logo
lamps back of cab
□ CSGN-GTR Cab sign logo - Volvo "Globetrotter" or "Power" sign
□ WLC-PKL Preparation kit, cables and switch for low mounted working
■ HORN-F1S Horn - Air single tone - chassis mounted lamps back of cab
□ HORN-R2S Horn - Air - Two roof-mounted □ WLC-PKLH Preparation kit - cables and switch for low and high mounted
working lamps back of cab.
□ ANT-CBR Roof mounted antenna for CB radio, single aerial. Only
Globetrotter cabs brings in extra DIN slots. □ ECBB-HIG Bodybuilder module - High level body electrical centre in dash
input/output module
□ ACCBR-AP Front, middle & rear roof mounted accessory brackets ■ ECBB-MED Bodybuilder module - Medium level body electrical centre in
□ ACCBR-F Front roof mounted accessory bracket dash input/output module
□ ACCBR-FM Front & middle roof mounted accessory brackets
□ ACCBR-FR Front & rear roof mounted accessory brackets □ BBCHAS1 One 7-pole connector for Body builder interface
□ ACCBR-M Middle roof mounted accessory bracket □ BBCHAS3 Three 7-pole connectors for Body builder interface
□ ACCBR-R Rear roof mounted accessory bracket
□ BEPR-T2 Body builder electrical software preparation for tipper with
□ ACCBR-RM Rear & middle roof mounted accessory brackets
remote control
□ STUC-B Left and right storage compartments under cab
□ EXSTER External steering control - Volvo dynamic steering and
□ STUC-L Left storage compartment under cab
bodybuilder module prepared for external control system,
□ STUC-R Right storage compartment under cab
installed and computer by bodybuilder

■ Standard Equipment □ Optional Equipment

For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.

For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).

The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.

6 (7)
Ref: FH 42T 6A 01 GBR 2025-02-19 ENG
FH 16 4x2 Tractor - Rear Air Suspension FH 42T 6A
■ TD-LED Trailer detection with LED sensing
□ AUXL-SPK Electrical preparation kit - wiring and switch for snow plough
lights
□ TAILPRE2 Tail lift preparation kit, wireless remote operation
□ TAILPREP Taillift preparation kit - cab switch and warning in driver display
□ AESW2 Two Body builder bistable electrical switches (marked AUX1 /
AUX2)
□ AESW2PK 2 Body builder bistable el.switches (marked AUX1/AUX2) and
prep. for 4 more switches
□ AUXSW-4 Wiring for 4 extra switches (from Body builder electrical centre
to switch positions)

DELIVERY SERVICES
■ TGW-4GWL Telematics gateway - GSM/GPRS/4G modem, LTE & WLAN
□ FMS-PK Fleet management system gateway - Required for aftermarket
telematics
□ DRUT1 Driver utility app - "My Truck" - 1 year subscription
For mobile phone, tablet, with android and IOS systems.
Only available with Volvo Connect subscription
□ DRUT2 Driver utility app - "My Truck" - 2 year subscription
For mobile phone, tablet, with android and IOS systems.
Only available with Volvo Connect subscription
□ DRUT3 Driver utility app - "My Truck" - 3 year subscription
For mobile phone, tablet, with android and IOS systems.
Only available with Volvo Connect subscription
□ DRUT4 Driver utility app - "My Truck" - 4 year subscription
For mobile phone, tablet, with android and IOS systems.
Only available with Volvo Connect subscription
□ DRUT5 Driver utility app - "My Truck" - 5 year subscription
For mobile phone, tablet, with android and IOS systems.
Only available with Volvo Connect subscription

■ Standard Equipment □ Optional Equipment

For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.

For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).

The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.

7 (7)
Ref: FH 42T 6A 01 GBR 2025-02-19 ENG