Technical Particulars
1100 Volt PVC Power Cable(Unarmoured)
Size/
Sl.No Particulars 3.5 Core x 35 mm2 4 Core x 10 mm2 2 Core x 16 mm2
Unit
1 Name of the Manufacture
2 Applicable Standard IS : 1554 (Part-1) 1988
3 Type of Cable AYFY AYFY AYFY
4 Voltage Grade Volts 1100 1100 1100
5 No of Cores No 3.5 4 2
6 Conductor
a Material E.C Grade Aluminium
b Nom.Size - Phase/ Neutral Sq.mm 35/16 10 16
Min. no of Strands- Phase/
c No 6/7 7 7
Neutral
d Shape Sector Shaped Standard Circular
0
Max. D.C. Resistance at 20 C
e ohm/km 0.868/1.91 3.08 1.91
PN
7 Insulation
a Material PVC Type A [IS: 5831-84]
b Nom. Thickness mm 1.2/1.0 1 1
Red & Black coloured
8 Core Identification Red, Yellow, Blue & Black coloured insulation
insulation
9 Inner Sheath
a Material PVC Type A [IS: 5831-84]
b Min. Thickness mm 0.3 0.3 0.3
10 Outer sheath
a Material PVC Type A [IS: 5831-84]
b Min. Thickness mm 1.4 1.4 1.4
Approx. overall diameter of
11 mm 25.5 21.5 21
Cable
Continuous current carrying
12
capacity
o
a In Air (At 40 C) Amps 86 40 59
b In Ground (At 30oC) Amps 92 46 70
Short Circuit rating (Duration 1
13 KA 2.66 0.76 1.22
Sec.)
14 Standard packing length Mtrs 500 + 5% 1000 + 5% 1000 + 5%
Min. Bending Radius mm
15 12 times O.D
Technical Particulars
1100 Volt XLPE Aerial Bunched Cable
Sl.No Particulars Size/ Unit 1100 V 3 x 50+ 1x 35 mm2
1 Name of the Manufacture
2 Applicable Standard IS: 14255:1995
3 Type of Cable LT Aerial Bunched XLPE Cable
4 Voltage Grade Volts 1100
5 No of Cores
i Phase No 3
ii Bare Messenger No 1
6 Phase Cores
6.1 Conductor
a Material E.C Grade Aluminium
b Nom.Size Sq.mm 50
c Shape Stranded Circular Compacted
d Maz. D.C. Resistance at 200C ohm/km 0.641
6.2 Insulation
a Material Black XLPE
b Nom. Thickness mm 1.5
6.3 Core Identification By provided ridges on phase core
7 Messenger
Aluminium Alloy Conductor as per IS 398 (IV) 1994 & IS
a Material
14255: 1995
b Nom.Size Sq.mm 35
c Maz. D.C. Resistance at 200C ohm/km 0.986
d Approx. Breaking load KN 9.8
8 Approx. overall diameter of Cable mm 30.6
9 Continuous current carrying capacity
In Air (At 40oC) Ampa 130
10 Short Circuit rating (Duration 1 Sec.) KA 4.7
11 Standard packing length Mtrs 500 + 5% / 1000 + 5%
Technical Particulars
1100 Volt XLPE Aerial Bunched Cable
Sl.No Particulars Size/ Unit 3 x 95 + 1x 50 + 1x 35 mm2
1 Name of the Manufacture
2 Applicable Standard IS: 14255:1995
3 Type of Cable LT Aerial Bunched XLPE Cable
4 Voltage Grade Volts 1100
5 No of Cores
i Phase No 3
ii Bare Messenger No 1
iii Lighting conductor No 1
6 Phase Cores
6.1 Conductor
a Material E.C Grade Aluminium
b Nom.Size Sq.mm 95
c Shape Stranded Circular Compacted
0
d Maz. D.C. Resistance at 20 C ohm/km 0.32
6.2 Insulation
a Material Black XLPE
b Nom. Thickness mm 1.5
6.3 Core Identification By provided ridges on phase core
7 Messenger
Aluminium Alloy Conductor as per IS 398 (IV) 1994 & IS
a Material
14255: 1995
b Nom.Size Sq.mm 50
c Shape Stranded Circular Compacted
d Maz. D.C. Resistance at 200C ohm/km 0.689
e Min. Breaking load KN 14
8 Litghting Core
8.1 Conductor
a Material E.C Grade Aluminium
b Nom.Size 35
c Shape Stranded Circular Compacted
0
d Maz. D.C. Resistance at 20 C 0.868
8.2 Insulation
a Material XLPE
b Nom. Thickness mm 1.2
9 Approx. overall diameter of Cable mm 38.5
10 Continuous current carrying capacity
In Air (At 40oC) Ampa 188
11 Short Circuit rating (Duration 1 Sec.) KA 8.93
12 Standard packing length Mtrs 500 + 5% / 1000 + 5%
Guranteed Technical Particulars of 1.1 KV (LT) Aerial Bunched Cable
Sl.No Description Guranteed value
1 Name & Address of the manufacturer
2 Applicable Standard to which cable conforms IS: 10810-1984, IS:8130-1984, IS: 14255-1995
& IS: 398 (Pt-IV)-1979
3 Type of cable LT Aerial Bunched XLPE Cable
4 Voltage Grade (KV) Upto & including 1.1 KV (LT) Cable
3Cx35+1Cx25+1Cx16 mm 2
5 Phase conductor Details
i Type of material EC grade Al. Cond. As per IS 8130/84
ii Nominal cros sectional area (mm 2) 35.00
iii No. of phase conductor 3
iv Nominal conductor diameter (mm) 7.2 + 0.20
v Diameter of each strand before stranding (mm) 2.52
vi No.of strands in each conductor 7
vii Shape Compacted Circular
viii Tensile strength (N/mm 2) N.A
ix Max. DC resistance at 20OC (Ohm/Km) 0.868
x Approx mass (Kg/ Km) 95+5
6 Massenger detail (Bare)
i Material Al.Alloy Cond. Generally conf. IS-398 (Pt-IV)
ii Nominal size (mm 2) 25.00
iii No of wires (No) 7
iv Diameter of each wire (mm) 2.14
v Nominal conductor diameter (mm) 6.0+0.20
vi Shape Compacted Circular
vii Max. DC resistance at 20OC (Ohm/Km) 1.38
viii Min. Breaking load (KN) 7.00
ix Approx mass (Kg/ Km) 65.00+3
7 Street Light Conductor Details
i Type of material EC grade Al. Cond. As per IS 8130/84
ii Nominal cros sectional area (mm 2) 16.00
iii Nominal conductor diameter (mm) 5.0 + 0.20
iv Diameter of each strand before stranding (mm) 1.71
v No.of strands in each conductor 7
vi Shape Compacted Circular
vii Tensile strength (N/mm 2) N.A
viii Max. DC resistance at 20OC (Ohm/Km) 1.91
ix Approx mass (Kg/ Km) 43+3
8 Insulation (For phase conductor)
i Material XLPE
ii Type As per IS: 14255/95
iii Nominal Thickness (mm) 1.20
iv Phase Identification By ridge
9 Insulation Properties (XLPE)
i Tensile strength (N/mm2)(Min) 12.5
ii % Elongation (Min) 200
iii Volume Resistivity (Min)
a At 27OC (Ohms-cm) 1 x 1013 Ohm Cm.
b At 70OC (Ohms-cm) 11
1 x 10 Ohm Cm.
10 Approx. overall diameter of cable (mm) 25.20
11 Sequential marking of length N.A
12 Packing Wooden drums
13 Standard drum length (Mtrs.) 1 lengths of 1000 + 5%
14 Embossing
Guranteed Technical Particulars of 1.1 KV (LT) Aerial Bunched Cable
Sl.No Description Guranteed value
1 Name & Address of the manufacturer
2 Applicable Standard to which cable conforms IS: 10810-1984, IS:8130-1984, IS: 14255-1995
& IS: 398 (Pt-IV)-1979
3 Type of cable LT Aerial Bunched XLPE Cable
4 Voltage Grade (KV) Upto & including 1.1 KV (LT) Cable
ICx35+1Cx25 mm2
5 Phase conductor Details
i Type of material EC grade Al. Cond. As per IS 8130/84
ii Nominal cros sectional area (mm 2) 35.00
iii No. of phase conductor 1
iv Nominal conductor diameter (mm) 7.2+0.20
v Diameter of each strand before stranding (mm) 2.52
vi No.of strands in each conductor 7
vii Shape Compacted Circular
viii Tensile strength (N/mm 2) N.A
ix Max. DC resistance at 20OC (Ohm/Km) 0.868
x Approx mass (Kg/ Km) 95+3
6 Massenger detail (Bare)
i Material Al.Alloy Cond. Generally conf. IS-398 (Pt-IV)
ii Nominal size (mm 2) 25
iii No of wires (No) 7
iv Diameter of each wire (mm) 2.14
v Nominal conductor diameter (mm) 6.0+0.20
vi Shape Compacted Circular
vii Max. DC resistance at 20OC (Ohm/Km) 1.38
viii Min. Breaking load (KN) 7
ix Approx mass (Kg/ Km) 65.00+3
7 Insulation (For phase conductor)
i Material XLPE
ii Type As per IS: 14255/95
iii Nominal Thickness (mm) 1.2
iv Phase Identification By ridge
8 Insulation Properties (XLPE)
i Tensile strength (N/mm2)(Min) 12.5
ii % Elongation (Min) 200
iii Volume Resistivity (Min)
a At 27OC (Ohms-cm) 1 x 1013 Ohm Cm.
b At 70OC (Ohms-cm) 11
1 x 10 Ohm Cm.
9 Approx. overall diameter of cable (mm) 15.8
10 Sequential marking of length N.A
11 Packing Wooden drums
12 Standard drum length (Mtrs.) 1 lengths of 1000 + 5%
13 Embossing
Guranteed Technical Particulars of 1.1 KV (LT) Aerial Bunched Cable
Sl.No Description Guranteed value
1 Name & Address of the manufacturer
2 Applicable Standard to which cable conforms IS: 10810-1984, IS:8130-1984, IS: 14255-1995
& IS: 398 (Pt-IV)-1979
3 Type of cable LT Aerial Bunched XLPE Cable
4 Voltage Grade (KV) Upto & including 1.1 KV (LT) Cable
3Cx16+1Cx25 mm2
5 Phase conductor Details
i Type of material EC grade Al. Cond. As per IS 8130/84
ii Nominal cros sectional area (mm 2) 16.00
iii No. of phase conductor 3
iv Nominal conductor diameter (mm) 5.0 + 0.20
v Diameter of each strand before stranding (mm) 1.71
vi No.of strands in each conductor 7
vii Shape Compacted Circular
viii Tensile strength (N/mm 2) N.A
ix Max. DC resistance at 20OC (Ohm/Km) 1.91
x Approx mass (Kg/ Km) 43+3
6 Massenger detail (Bare)
i Material Al.Alloy Cond. Generally conf. IS-398 (Pt-IV)
ii Nominal size (mm 2) 25.00
iii No of wires (No) 7
iv Diameter of each wire (mm) 2.14
v Nominal conductor diameter (mm) 6.0+0.20
vi Shape Compacted Circular
vii Max. DC resistance at 20OC (Ohm/Km) 1.38
viii Min. Breaking load (KN) 7.00
ix Approx mass (Kg/ Km) 65.00+3
7 Insulation (For phase conductor)
i Material XLPE
ii Type As per IS: 14255/95
iii Nominal Thickness (mm) 1.20
iv Phase Identification By ridge
8 Insulation Properties (XLPE)
i Tensile strength (N/mm2)(Min) 12.5
ii % Elongation (Min) 200
iii Volume Resistivity (Min)
a At 27OC (Ohms-cm) 1 x 1013 Ohm Cm.
b At 70OC (Ohms-cm) 11
1 x 10 Ohm Cm.
9 Approx. overall diameter of cable (mm) 20.80
10 Sequential marking of length N.A
11 Packing Wooden drums
12 Standard drum length (Mtrs.) 1 lengths of 1000 + 5%
13 Embossing
Guranteed Technical Particulars of 1.1 KV (LT) Aerial Bunched Cable
Sl.No Description Guranteed value
1 Name & Address of the manufacturer
2 Applicable Standard to which cable conforms IS: 10810-1984, IS:8130-1984, IS: 14255-1995
& IS: 398 (Pt-IV)-1979
3 Type of cable LT Aerial Bunched Cable
4 Voltage Grade (KV) Upto & including 1.1 KV (LT) Cable
3Cx25+1Cx16 mm2
5 Phase conductor Details
i Type of material EC grade Al. Cond. As per IS 8130/84
ii Nominal cros sectional area (mm 2) 25.00
iii No. of phase conductor 3
iv Nominal conductor diameter (mm) 6.0 + 0.20
v Diameter of each strand before stranding (mm) 2.14
vi No.of strands in each conductor 7
vii Shape Compacted Circular
viii Tensile strength (N/mm 2) N.A
ix Max. DC resistance at 20OC (Ohm/Km) 1.2
x Approx mass (Kg/ Km) 65+3
6 Massenger detail (Bare)
i Material Al.Alloy Cond. Generally conf. IS-398 (Pt-IV)
ii Nominal size (mm 2) 25.00
iii No of wires (No) 7
iv Diameter of each wire (mm) 1.71
v Nominal conductor diameter (mm) 5.0+0.20
vi Shape Compacted Circular
vii Max. DC resistance at 20OC (Ohm/Km) 1.91
viii Min. Breaking load (KN) 6.50
ix Approx mass (Kg/ Km) 43.00+3
7 Insulation (For phase conductor)
i Material XLPE
ii Type As per IS: 14255/95
iii Nominal Thickness (mm) 1.20
iv Phase Identification By ridge
8 Insulation Properties (XLPE)
i Tensile strength (N/mm2)(Min) 12.5
ii % Elongation (Min) 200
iii Volume Resistivity (Min)
a At 27OC (Ohms-cm) 1 x 1013 Ohm Cm.
b At 70OC (Ohms-cm) 11
1 x 10 Ohm Cm.
9 Approx. overall diameter of cable (mm) 23.00
10 Sequential marking of length N.A
11 Packing Wooden drums
12 Standard drum length (Mtrs.) 1 lengths of 1000 + 5%
13 Embossing
