Datasheet

MA Analytical Balances
Efficient and Simple

Simple Operation
The large, bright screen is easy to read,
while on-screen instructions guide you
through each weighing procedure. Calcu-
lations are performed automatically and
it’s simple to print out results or transfer
them to a storage device.

Multiple Interfaces
Thanks to the USB-A and RS232
interfaces, you can transfer your
weighing data quickly and without error
to a printer or a computer or connect to a
USB storage device for simple data
transfer.

Trusted Performance
With proven weighing technologies and
automatic adjustment using the internal
test weights, you can trust your results to
be consistent and precise.

Easy Eyeryday Weighing

For Your Routine Tasks

Built to Last You can rely on accurate results with these high-quality
Thanks to high-quality materials and balances that are intuitive to operate and easy to clean.
solid construction, these balances are Built-in applications provide simple instructions, while
highly resilient. Even with intensive use
in challenging weighing environments,
automatic calculations and electronic data transfer
you can depend on many years of minimize errors and make documentation easy.
reliable service.

The bright LCD screen provides excellent readability,

while the glass surface resists wear and tear and is
easy to clean. The touch keys make it simple to
operate the balance and navigate through the menus in
the user interface.
 Technical Specifications
MA55 MA95 MA155DU
Limit values
Capacity 52 g 92 g 152 g
Readability 0.01 mg 0.01 mg 0.1 mg
Capacity of fine range – – 62 g
Readability in fine range – – 0.01 mg
Repeatability (at 5% load) 0.03 mg 0.03 mg 0.03 mg
Linearity deviation 0.1 mg 0.1 mg 0.2 mg
Sensitivity offset (at nominal load) ▲ 0.4 mg 0.4 mg 0.8 mg
Typical values
Repeatability (at 5% load) 0.015 mg 0.015 mg 0.015 mg
Linearity deviation 0.03 mg 0.03 mg 0.06 mg
Sensitivity offset (at nominal load) ▲ 0.25 mg 0.25 mg 0.5 mg
Minimum weight (USP, tolerance = 0.10%) ▼ 30 mg 30 mg 30 mg
Minimum weight (tolerance = 1%) ▼ 3 mg 3 mg 3 mg
Settling time 4s 4s 4s
Dimensions and other specifications
Balance dimensions (W × D × H) 209 × 354 × 354 mm 209 × 354 × 354 mm 209 × 354 × 354 mm
Weighing pan dimensions (W × D) – – –
Weighing pan diameter 80 mm 80 mm 80 mm
▲ after adjustment with internal weight
▼ determined at 5% load, k = 2
All models are available as approved versions.

MA54 MA104 MA204

Limit values
Capacity 52 g 120 g 220 g
Readability 0.1 mg 0.1 mg 0.1 mg
Repeatability (at 5% load) 0.1 mg 0.1 mg 0.1 mg
Linearity deviation 0.2 mg 0.2 mg 0.2 mg
Sensitivity offset (at nominal load) ▲ 0.3 mg 0.5 mg 0.8 mg
Typical values
Repeatability (at 5% load) 0.08 mg 0.08 mg 0.08 mg
Linearity deviation 0.06 mg 0.06 mg 0.06 mg
Sensitivity offset (at nominal load) ▲ 0.15 mg 0.3 mg 0.5 mg
Minimum weight (USP, tolerance = 0.10%) ▼ 160 mg 160 mg 160 mg
Minimum weight (tolerance = 1%) ▼ 16 mg 16 mg 16 mg
Settling time 2s 2s 2s
Dimensions and other specifications
Balance dimensions (W × D × H) 209 × 354 × 354 mm 209 × 354 × 354 mm 209 × 354 × 354 mm
Weighing pan dimensions (W × D) – – –
Weighing pan diameter 90 mm 90 mm 90 mm
▲ after adjustment with internal weight
▼ determined at 5% load, k = 2
All models are available as approved versions. Models without internal test weights are also available (ExCal).

2
Datasheet
MA Precision Balances
Efficient and Simple

Simple Operation
The large, bright screen is easy to read,
while on-screen instructions guide you
through each weighing procedure. Calcu-
lations are performed automatically and
it’s simple to print out results or transfer
them to a storage device.

Multiple Interfaces
Thanks to the USB-A and RS232
interfaces, you can transfer your
weighing data quickly and without error
to a printer or a computer or connect to a
USB storage device for simple data
transfer.

Trusted Performance Easy Everyday Weighing

With proven weighing technologies and
automatic adjustment using the internal
For Your Routine Tasks
test weights, you can trust your results to
be consistent and precise. You can rely on accurate results with these high-quality
balances that are intuitive to operate and easy to clean.
Built-in applications provide simple instructions, while
automatic calculations and electronic data transfer
minimize errors and make documentation easy.
Built to Last
Thanks to high-quality materials and The bright LCD screen provides excellent readability,
solid construction, these balances are while the glass surface resists wear and tear and is
highly resilient. Even with intensive use
in challenging weighing environments,
easy to clean. The touch keys make it simple to
you can depend on many years of operate the balance and navigate through the menus in
reliable service.
the user interface.
 Technical Specifications
MA103 MA203 MA303 MA503
Limit values
Capacity 120 g 220 g 320 g 520 g
Readability 1 mg 1 mg 1 mg 1 mg
Repeatability (at 5% load) 1 mg 1 mg 1 mg 1 mg
Linearity deviation 2 mg 2 mg 2 mg 2 mg
Sensitivity offset (at nominal load) ▲ 6 mg 8 mg 8 mg 8 mg
Typical values
Repeatability (at 5% load) 0.7 mg 0.7 mg 0.7 mg 0.7 mg
Linearity deviation 0.6 mg 0.6 mg 0.6 mg 0.6 mg
Sensitivity offset (at nominal load) ▲ 4 mg 5 mg 5 mg 5 mg
Minimum weight (USP, tolerance = 0.10%) ▼ 1.4 g 1.4 g 1.4 g 1.4 g
Minimum weight (tolerance = 1%) ▼ 140 mg 140 mg 140 mg 140 mg
Settling time 1.5 s 1.5 s 1.5 s 1.5 s
Dimensions and other specifications
Balance dimensions (W × D × H) 209 × 354 × 209 × 354 × 209 × 354 × 209 × 354 ×
354 mm 354 mm 354 mm 354 mm
Weighing pan dimensions (W × D) – – – –
Weighing pan diameter 120 mm 120 mm 120 mm 120 mm
▲ after adjustment with internal weight
▼ determined at 5% load, k = 2
All models are available as approved versions. Models without internal test weights are also available (ExCal).

MA602 MA1002 MA2002 MA3002

Limit values
Capacity 620 g 1.2 kg 2.2 kg 3.2 kg
Readability 10 mg 10 mg 10 mg 10 mg
Repeatability (at 5% load) 10 mg 10 mg 10 mg 10 mg
Linearity deviation 20 mg 20 mg 20 mg 20 mg
Sensitivity offset (at nominal load) ▲ 40 mg 60 mg 80 g 80 kg
Typical values
Repeatability (at 5% load) 7 mg 7 mg 7 mg 7 mg
Linearity deviation 6 mg 6 mg 6 mg 6 mg
Sensitivity offset (at nominal load) ▲ 25 mg 40 mg 50 mg 50 mg
Minimum weight (USP, tolerance = 0.10%) ▼ 14 g 14 g 14 g 14 g
Minimum weight (tolerance = 1%) ▼ 1.4 g 1.4 g 1.4 g 1.4 g
Settling time 1s 1s 1s 1s
Dimensions and other specifications
Balance dimensions (W × D × H) 209 × 354 × 209 × 354 × 209 × 354 × 209 × 354 ×
100 mm 100 mm 100 mm 100 mm
Weighing pan dimensions (W × D) 180 × 180 mm 180 × 180 mm 180 × 180 mm 180 × 180 mm
Weighing pan diameter – – – –
▲ after adjustment with internal weight
▼ determined at 5% load, k = 2
All models are available as approved versions. Models without internal test weights are also available (ExCal).

2
 MA4002 MA6002 MA5001
Limit values
Capacity 4.2 kg 6.2 kg 5.2 kg
Readability 10 mg 10 mg 100 mg
Repeatability (at 5% load) 10 mg 10 mg 80 mg
Linearity deviation 20 mg 20 mg 60 mg
Sensitivity offset (at nominal load) ▲ 80 mg 80 mg 240 mg
Typical values
Repeatability (at 5% load) 7 mg 7 mg 50 mg
Linearity deviation 6 mg 6 mg 20 mg
Sensitivity offset (at nominal load) ▲ 50 mg 50 mg 150 mg
Minimum weight (USP, tolerance = 0.10%) ▼ 14 g 14 g 100 g
Minimum weight (tolerance = 1%) ▼ 1.4 g 1.4 g 10 g
Settling time 1s 1s 1s
Dimensions and other specifications
Balance dimensions (W × D × H) 209 × 354 × 100 mm 209 × 354 × 100 mm 209 × 354 × 100 mm
Weighing pan dimensions (W × D) 180 × 180 mm 180 × 180 mm 180 × 180 mm
Weighing pan diameter – – –
▲ after adjustment with internal weight
▼ determined at 5% load, k = 2
All models are available as approved versions. Models without internal test weights are also available (ExCal).

MA12001L MA16001L MA32001L MA32000L

Limit values
Capacity 12.2 kg 16.2 kg 32.2 kg 32.2 kg
Readability 100 mg 100 mg 100 mg 1g
Repeatability (at 5% load) 80 mg 80 mg 80 mg 600 mg
Linearity deviation 200 mg 200 mg 250 mg 300 mg
Sensitivity offset (at nominal load) ▲ 600 mg 800 mg 900 mg 1g
Typical values
Repeatability (at 5% load) 40 mg 40 mg 40 mg 400 mg
Linearity deviation 60 mg 60 mg 80 mg 100 mg
Sensitivity offset (at nominal load) ▲ 400 mg 500 mg 550 mg 650 mg
Minimum weight (USP, tolerance = 0.10%) ▼ 82 g 82 g 82 g 820 g
Minimum weight (tolerance = 1%) ▼ 8.2 g 8.2 g 8.2 g 82 g
Settling time 1.5 s 1.5 s 1.5 s 1.2 s
Dimensions and other specifications
Balance dimensions (W × D × H) 354 × 380 × 354 × 380 × 354 × 380 × 354 × 380 ×
126 mm 126 mm 126 mm 126 mm
Weighing pan dimensions (W × D) 352 × 246 mm 352 × 246 mm 352 × 246 mm 352 × 246 mm
Weighing pan diameter – – – –
▲ after adjustment with internal weight
▼ determined at 5% load, k = 2
All models are available as approved versions.

3
 Features
Performance Quality Assurance Sustainable Value

Electromagnetic Force Compensation OIML/NTEP approved Metal base, PBT top housing
(EMFC) weighing cell Front level indicator Overload protection
Internal adjustment Sample ID Easy-to-clean QuickLock draft shield

Efficient Operation Data Management

LCD hybrid touchscreen 2 interfaces: USB-A, RS232
10 built-in applications Bluetooth option
Statistical data analysis Transfer weight function for easy data
Hook for weighing below the balance transfer
Plug & Play MT-SICS
EasyDirect Balance software

Accessories
Enhance performance, improve ergonomics, and handle your data
efficiently with our wide range of accessories, including EasyDirect
Balance data management software, printers, weights, and
density kit.
For further information on accessories, please visit our web page.
www.mt.com/lab-accessories

Mettler-Toledo GmbH
www.mt.com/MA-precision
Im Langacher 44
For more information
8606 Greifensee, Switzerland
www.mt.com/contact

Subject to technical changes.

© 10/2023 METTLER TOLEDO. All rights reserved.
30839980A en
Group Marketing 30839980