FIRE DAMPERS

ETCE and ETCS

TECHNICAL DATA
 2 Fire dampers ETCE and ETCS

FIRE DAMPERS ETCE AND ETCS PRODUCT DATA

• Sizes Ø100-1000 mm
Veloduct ETCE fire damper is CE marked based on product standard EN 15650:2010 and
• CE marked (EN 15650:2010)
tested according to the test standard EN 1366-2. ETCE meets the requirements of fire class
• Declaration of Performance ETCE
EI 60 S / EI 90 S / EI 120 S. The damper casing also fulfils the requirements of leakage class C
011CPR2022-09-30
according to EN 1751. Fire damper is available both with a built-in electrical actuator and with a
• Declaration of Performance ETCS
fuse mechanism.
018CPR2022-05-31
• Fire class according to EN 13501-3
ETCE fire damper is designed for installation in a wall or intermediate floor for circular duct
EI 60 (ve - ho i <-> o) S
connection. The damper casing is manufactured from hotgalvanised sheet steel and the blade
EI 90 (ve - ho i <-> o) S
from fire-insulating calcium silicate material. The fire damper is installed inside or remote of the
EI 120 (ve - ho i <-> o) S
fire compartment construction element according to the installation instructions. The damper is
• Testing according to EN 1366-2
equipped with a Veloduct joint, which provides air tight duct installation.
• Fire damper meets the requirements of
leakage class 2 according to EN 1751
ETCE motorized dampers have passed a durability test of 10 000 cycles (open/close) and can
• Fire damper casing meets the requirements
be used also for daily ventilation purposes. The use of a motorized damper enables automatic
of leakage class C according to EN 1751
function testing (e.g. by our control and monitoring system FICO) and the use of a smoke-
• Maximum pressure against a closed damper
detector-based release system. The motor is equipped with built-in microswitches for both
is allowed to be 2500 Pa, corresponding to
open and closed position. When using our control and monitoring system FICO, the actuator is
pressure class B
always of type 24 V. See FläktGroup control and monitoring system FICO-PRO or FICO-MINI. The
• Operating temperature in cold indoor premises
damper is also available with electrical actuator of 230 V.
up to -20°C
The damper with the fuse mechanism is equipped with two microswitches (open and close
positions).
PRODUCT CODE EXAMPLE
Fire damper ETCE-0160-03-3
Motorized ETCE damper is available also with stainless steel damper casing (sizes Ø100-630).
Ordering code for stainless steel model is ETCS-aaaa-bb-c. Technical data and dimensions as
for ETCE.

FläktGroup DC_9502GB 20230621_R7 Specifications are subject to alteration without notice.

Fire dampers ETCE and ETCS 3

TECHNICAL DATA - PRESSURE DROP, SOUND DATA

PRESSURE DROP AND SOUND PRESSURE LEVEL

qv (m3/h)

200 400 1000 2000 4000 10000 20000

200
12 0,

0
0

0
0

5
10
Lp10A dB(A)

20

25

30

40
15

16

31
5
100 50
45

0
50 40

50
35
30
∆Pt (Pa)

0
63
10

0
80
5

00
1 10
20 100 200 1000 2000 6000
qv (l/s)

SOUND POWER LEVEL CORRECTION BY OCTAVE BANDS

Octave bands (Hz) 63 125 250 500 1000 2000 4000 8000
Correction koct 100-400 24 17 12 6 2 -2 -7 -14
500-1000 5 3 3 1 -1 -4 -9 -14
Tolerance ± 6 6 3 3 3 3 3 3

DEFINITIONS
qv Air flow l/s, m3/h
LWoct Sound power level in a duct by octave bands dB
Lp10A Sound pressure level with 4 dB room attenuation
(10 m2sab) dB(A)
Koct Correction dB
Δpt Pressure drop Pa

FläktGroup DC_9502GB 20230621_R7 Specifications are subject to alteration without notice.

 4 Fire dampers ETCE and ETCS

DIMENSIONS AND WEIGHTS, FIRE CLASSIFICATION

DIMENSIONS AND WEIGHTS

Motorized damper Damper with thermal fuse
sizes 100 - 1000 sizes 100 - 630
A A
E1 B1) E2 E1 B1) E2
2) 2)
L L L L

Cmax Cmax

ØD
ØD

1) Distance from the wall 2) Support flange in sizes Ø800 and Ø1000

Weight (kg)
Size ØD A (mm) ±10 B (mm) ±10 L (mm) Cmax (mm) E1 (mm) E2 (mm) Damper with
Motorized damper
thermal fuse
100 (125)* 416* 195 35 100 - - 3,2 2,7
125 416 195 35 100 - - 2,8 2,3
150 416 195 35 100 - - 3,1 2,6
160 416 195 35 100 - - 3,3 2,8
200 416 195 35 100 - - 4,1 3,4
250 416 195 40 100 - - 4,9 4,4
300 416 195 40 100 - - 6,1 5,4
315 416 195 40 100 - - 6,3 5,4
400 416 195 60 100 45 - 9,3 7,9
500 570 310 60 100 50 - 15,3 14
630 570 310 60 100 120 - 21,3 20
800 585 310 100 100 210 30 32,3 -
1000 585 310 100 100 310 130 43,2 -

* Ø125 with 2 x reduction pieces BDED-1-012-010, total length 556 mm.

FIRE CLASSIFICATION
Installation method Pressure in
Size ØD Fire resistance
Flexible wall Rigid wall Rigid floor Remote of wall/floor * fire test (Pa)
x x x x EI 60 (ve - ho i<->o) S
100 - 800 x x x - EI 90 (ve - ho i<->o) S 300
x x x - EI 120 (ve - ho i<->o) S
x x x - EI 60 (ve - ho i<->o) S
1000 - x x - EI 90 (ve - ho i<->o) S 300
- - x - EI 120 (ve - ho i<->o) S
x x x - EI 60 (ve - ho i<->o) S
100 - 400 - - x - EI 90 (ve - ho i<->o) S 500 **
- - x - EI 120 (ve - ho i<->o) S

*) Equipped with a clamp collar ETCZ-1.

**) 500 Pa is a demand in certain countries.

FläktGroup DC_9502GB 20230621_R7 Specifications are subject to alteration without notice.

Fire dampers ETCE and ETCS 5

PRODUCT CODE AND ACCESSORIES

DESCRIPTION ACCESSORIES
FläktGroup CE marked fire damper ETCE is suitable for installation into Inspection piece FWD-aaaa-1
building elements of fire class EI 60 / EI 90 / EI 120 made of concrete, Grille FND-aaaa-1-1
lightweight concrete, brick or gypsum board. Size (aaaa)
0100-1000
PRODUCT CODE
Clamp collar ETCZ-1-aaaa-1
Fire damper ETCE-aaaa-bb-c
Obligatory accessory in installation remote of building elements
Size (aaa)
Size (aaaa)
Connection diameter in mm
0100-0800
0100, 0125, 0150, 0160, 0200, 0250, 0300, 0315, 0400, 0500,
0630, 0800, 1000
Control system FICO-PRO / FICO-MINI
Actuator (bb) See separate brochures.
02 = fuse mechanism 70°C with two microswitches (sizes 100-630)
03 = 24V AC/DC and thermal trip (sizes 100-1000) SPARE PARTS
05 = 230V AC and thermal trip (sizes 100-1000) Fuse part, 70 °C for fuse mechanism ETFF-99-01
Actuator model (c)
0 = fuse mechanism Fire damper actuator, Gruner
3 = FG motorized, Gruner (sizes 100-630*) sizes 100-315, 24 V 340TA-024-05-S2
2 = motorized B, Belimo sizes 100-315, 230 V 340TA-230-05-S2
* sizes 800, 1000 available for EI 60 sizes 400-1000, 24 V 360TA-024-12-S2/8F
sizes 400-1000, 230 V 360TA-230-12-S2/8F
Fire damper, stainless steel casing ETCS-aaaa-bb-c
Size (aaa) Fire damper actuator, Belimo
Connection diameter in mm sizes 100-315, 24 V BFL24-T.1 FLA
0100, 0125, 0150, 0160, 0200, 0250, 0300, 0315, 0400, 0500, sizes 100-315, 230 V BFL230-T FLA
0630 sizes 400-630, 24 V BFN24-T.1 FLA
sizes 400-630, 230 V BFN230-T FLA
Actuator (bb)
sizes 800-1000, 24 V BF24-T-2.1 FLA
03 = 24V AC/DC and thermal trip
sizes 800-1000, 230 V BF230-T-2 FLA
05 = 230V AC and thermal trip
Actuator model (c) Indicator for damper position
2 = motorized B, Belimo Gruner 300-ZEIG-001-A-a
Belimo ZZN12-B

INSPECTION PIECE FWD-aaaa-1 GRILLE FND-aaaa-1-1 CLAMP COLLAR ETCZ-1-aaaa-1

Ød
ØD
ØD

FWD length L consist of pieces BDEG+BDEM+BDET

FläktGroup DC_9502GB 20230621_R7 Specifications are subject to alteration without notice.

 6 Fire dampers ETCE and ETCS

WIRING

ACTUATOR ELECTRICAL DATA

Fire damper size Voltage Equipment Max power hold/drive Power for wire sizing
24V AC/DC Thermal trip 2,0 W / 6,5 W 9 VA
100 - 315
230V AC Thermal trip 1,5 W / 5,5 W 9,5 VA
24V AC/DC Thermal trip 2,0 W / 5,0 W 7 VA
400 - 630
230V AC Thermal trip 2,1 W / 5,5 W 11,5 VA
24V AC/DC Thermal trip 2,0 W / 7,0 W 10 VA
800 - 1000
230V AC Thermal trip 3,0 W / 8,5 W 11,5 VA
Storage temperature of fire damper actuator should not exceed +50 °C

WIRING DIAGRAM FOR DAMPER MOTOR

Power supply
T ~ AC 230 V
AC 24 V
– + DC 24 V

Status data of limit switches

1 2 S1 S2 S3 S4 S5 S6

<5° <80°

Thermal trip
Tf Tf LE D

WIRING DIAGRAM FOR TWO MICROSWITCHES (FUSE MECHANISM)

Wiring digram shows the situation where damper blade is in closed
position and microswitch (0°) is activated.

1 2 3 4 5 6 4 5 6
1 2 3

0° 90°
2

Imax = 0,1 A
Umax = 30 V (AC/DC)

FläktGroup DC_9502GB 20230621_R7 Specifications are subject to alteration without notice.

Fire dampers ETCE and ETCS 7

INSTALLATION - ETCE, ETCS

INSTALLATION INTO BUILDING ELEMENTS (WALLS AND INSTALLATION INTO BUILDING ELEMENTS MADE OF GYPSUM
INTERMEDIATE FLOORS) MADE OF CONCRETE, LIGHTWEIGHT BOARD OR SIMILAR MATERIAL WITH FIRE CLASS EI 60
CONCRETE OR BRICK WITH FIRE CLASS EI 60

M
S
ØD

ØD
≥100 mm
≥116 mm

Size ØD (mm) Installation opening Ø (mm)

≥120 mm/

(Ø100-400/
Ø500-1000)
≥140 mm

100 (125)* 135 - 137

125 135 - 137
150 160 - 162
160 170 - 172
200 210 - 212
250 260 - 262
300 310 - 312
M
315 325 - 327
400 410 - 412
≥ 200 mm 500 510 - 512
630 640 - 642
Size ØD (mm) Installation opening Ø (mm) 800 810 - 812
100 (125)* 175 - 195 1000 1010 - 1012
125 175 - 195 * Ø125 with 2 x reducer pieces BDED-1-012-010
150 200 - 220
160 210 - 230
200 250 - 270
250 300 - 320
300 350 - 370
315 365 - 385
400 450 - 470
500 550 - 570
630 680 - 700
800 850 - 870
1000 1050 - 1070

* Ø125 with 2 x reducer pieces BDED-1-012-010

FläktGroup DC_9502GB 20230621_R7 Specifications are subject to alteration without notice.

 8 Fire dampers ETCE and ETCS

INSTALLATION - ETCE, ETCS

INSTALLATION INTO BUILDING ELEMENTS (WALLS AND INSTALLATION INTO BUILDING ELEMENTS MADE OF GYPSUM
INTERMEDIATE FLOORS) MADE OF CONCRETE, LIGHTWEIGHT BOARD OR SIMILAR MATERIAL WITH FIRE CLASS E 90 /
CONCRETE OR BRICK WITH FIRE CLASS EI 90 / EI 120 EI 120

M
S

M
ØD

ØD
≥110 mm ≥126 mm

Installation Extra gypsum board (mm)

≥120 mm/

Size ØD (mm)
(Ø100-400/
Ø500-1000)
≥140 mm

opening (mm) min. thickness 12,5 mm

100 (125)* 225 x 225 405 x 405
125 225 x 225 405 x 405
150 250 x 250 430 x 430
160 260 x 260 440 x 440
200 300 x 300 480 x 480
250 350 x 350 530 x 530
M 300 400 x 400 580 x 580
315 415 x 415 595 x 595
≥ 200 mm 400 500 x 500 680 x 680
500 600 x 600 780 x 780

Size ØD (mm) Installation opening Ø (mm) 630 730 x 730 910 x 910

100 (125)* 185 - 205 800 900 x 900 1080 x 1080

125 185 - 205 * Ø125 with 2 x reducer pieces BDED-1-012-010
150 210 - 230
160 220 - 240
200 260 - 280
250 310 - 330
300 360 - 380
315 375 - 395
400 460 - 480
500 560 - 580
630 690 - 710
800 860 - 880
1000 1060 - 1080

* Ø125 with 2 x reducer pieces BDED-1-012-010

FläktGroup DC_9502GB 20230621_R7 Specifications are subject to alteration without notice.

Fire dampers ETCE and ETCS 9

INSTALLATION - ETCE

INSTALLATION OF ETCE FIRE DAMPER REMOTE OF BUILDING INSTALLATION OF ETCE FIRE DAMPER REMOTE OF BUILDING
ELEMENTS (WALLS AND FLOORS) MADE OF CONCRETE, ELEMENTS (WALLS) MADE OF GYPSUM BOARD OR SIMILAR
LIGHTWEIGHT CONCRETE OR BRICK WITH FIRE CLASS EI 60 MATERIAL WITH FIRE CLASS EI 60

ETCZ-1 ETCZ-1
M

≥100 mm ≥116 mm
ØD

ØD
ETCZ-1

ETCZ-1

Complete installation, operation and maintenance instructions can be

found on the FläktGroup home page www.flaktgroup.com.

For additional information, contact the nearest FläktGroup sales

representative.

FläktGroup DC_9502GB 20230621_R7 Specifications are subject to alteration without notice.

 FG_DC_9502GB_ETCE_ETCS_TE_20230621_R7 © Copyright 2023 FläktGroup
WWW.FLAKTGROUP.COM ETCE, ETCS 9502

FläktGroup is the European market leader for smart and energy efficient Indoor Air
and Critical Air solutions to support every application area. We offer our customers
innovative technologies, high quality and outstanding performance supported by
more than a century of accumulated industry experience. The widest product range
in the market, and strong market presence in 65 countries worldwide, guarantee
that we are always by your side, ready to deliver Excellence in Solutions.

PRODUCT FUNCTIONS BY FLÄKTGROUP

Air Treatment | Air Movement | Air Diffusion | Air Distribution | Air Filtration
Air Management & ATD’s | Air Conditioning & Heating | Controls | Service

» Learn more on www.flaktgroup.com

or contact one of our offices