Material Safety Data Sheet

Date of preparation: 3rd Feb 2025

SECTION 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

1.1 PRODUCT DETAILS

Product Name : MCM Mould Release Oil - Silver

Chemical Family : Lubricants

1.2 COMPANY IDENTIFICATION

Manufacturer Address : Moon Ho Sdn. Bhd. (1261425-D)

No. 28, Alam Perdana Industrial Park,

Jalan PP 11/4, Taman Putra Perdana,
47130 Puchong, Selangor.
1.3 CONTACT POINT

Person In-Charge : King Ong

Contact No. : +60-12- 639 9295

SECTION 2: PHYSICAL AND CHEMICAL PROPERTIES

Appearance : Pale, Red-Brown liquid

Odour : Mild Odor

Flash Point : o
160 c

Specific Gravity : 0.86

SECTION 3: HAZARD IDENTIFICATION

Health Hazard : No known immediate health hazards. High- pressure injection under

the skin may cause serious damage.

Physical Hazards : No known physical hazards. NFPA Rating.

(Health, Fire, Reactivity) : 0, 0, 0

Hazard Rating : Least- 0 Slight - 1 Moderate - 2 High - 3 Extreme - 4

 Inhalation : Inhalation of vapors (generated at high temperatures only) or oil mist may
cause mild irritation of the nose, throat, and respiratory tract.

Eye Irritation : Lubricating oils are generally considered no more than minimally irritating
to the eyes.

Skin Contact : Lubricating oils are generally considered no more than minimally irritating
to the skin.

Prolonged and repeated contact may result in deflating and drying of the
skin that may cause various skin disorders such as dermatitis, folliculate or
oil acne. Release of the material during high-pressure applications may
result in injection under the skin causing possible extensive tissue damage,
which is difficult to heal.

Ingestion : Lubricating oils are generally no more than slightly toxic if swallowed.

Signs and Symptoms : Irritation as noted above. Local necrosis is evidenced by delayed on set of
pain and tissue damage a few hours following injection.

Aggravated Medical : Pre-existing eye, skin and respiratory disorders may be aggravated by
Conditions exposure to this product.

For additional health information, refer to section 10.

SECTION 4: FIRST AID MEASURES

INHALATION

Remove victim to fresh air and provide oxygen if breathing is difficult. Get medical attention.

Skin : Remove contaminated clothing and shoes and wipe excess from skin.
Flush skin with water, and then wash with soap and water. If irritation
occurs, get medical attention. Do not reuse clothing until cleaned. If
redness, swelling, pain and/or listers occur, transport to the nearest medical
facility for additional treatment.

Eye : Flush with water. If irritation occurs, get medical attention. Do not induce
vomiting. In general, no treatment is necessary unless large quantities of
product are ingested. However, get medical attention.

Ingestion : Do not induce vomiting. In general, no treatment is necessary unless large

quantities of product are indigested. However, get medical attention.

Note to Physician : In general, emesis induction is unnecessary in high viscosity, low volatility
products such as oils and greases.
 SECTION 5: FIRE FIGHTING MEASURES

Flash Point : Min. 160

Upper Flammable Limit : Not determined Lower

Flammable Limit : Not determined

Extinguishing Media : Prevent run off from fire control or dilution from entering
streams, sewers or drinking water supply. Use water fog,‘alcohol
foam’,dry chemical or carbon dioxide (CO2) to extinguish flames.
Do not use a direct stream of water.

Special Fire Fighting : Do not enter confined fire space without full bunker
gear (helmet with face shield, bunker coats, gloves and rubber
boots), including a positive pressure, NIOSH approved, self-
contained breathing apparatus.

Unusual Fire and Explosion : Not determined

By-products of Combustion : Not determined Auto-ignition

Temperature : Not determined

Explosion Data : Not determined. Care should always be exercised in dust/mist

areas.

SECTION 6: ACCIDENTAL RELEASE MEASURES

Protective Measures : Wear appropriate personal protective equipment when cleaning up

spills. Refer to Section 8.

Spill Management

FOR LARGE SPILLS : Remove with vacuum truck or pump to storage/salvage vessels.

FOR SMALL SPILLS : Soak up residue with an absorbent such as clay, sand or other
suitable material. Place in non-leaking container and seal tightly
for proper disposal.

SECTION 7: HANDLING AND STORAGE

Precautionary Measures : Wash with soap and water before eating, drinking, smoking ,applying
cosmetics, or using toilet. Launder contaminated clothing before reuse.
Properly dispose of contaminated leather articles such as shoes or belts that
cannot be decontaminated. Avoid strong oxidising agents.

Storage : Store in a cool, dry place with adequate ventilation. Keep away from open
flames and high temperatures.

Container Warnings : Keep containers closed when not in use.

 SECTION 8: EXPOSURE CONTROL AND PERSONAL PROTECTION

Oil mist, mineral ACGIH TLV TWA: 5 mg/m3 STEL: 10 mg/m3

Oil mist, mineral OSHA PEL TWA: 5 mg/m3

Hydrogen sulfide ACGIH - TLV TWA: 10 ppmm STEL: 15ppmm

Hydrogen sulfide OSHA - PEL_IS TWA: 10 ppmm STEL: 15ppmm

Hydrogen sulfide Elevated Temperatures >120oF.

EXPOSURE CONTROLS

Adequate ventilation to control air borne concentrations below the exposure guidelines/limits.

PERSONAL PROTECTION
Personal protective equipment (PPE) selections vary based on potential exposure conditions such as handling practices,
concentration and ventilation. Information on the selection of eye, skin and respiratory protection for use with this
material is provided below.

Eye Protection : Chemical Goggles, or Safety glasses with side shields

Skin Protection : Use protective clothing, which is chemically resistant to this material. Selection of
protective clothing depends on potential exposure conditions and may include
gloves, boots, suits and other items. The selection(s) should take into account such
factors as job task, type of exposure and durability requirements.

Published literature, test data and/or glove and clothing manufacturers indicate the best protection is provided by:
Neoprene, or Nitrile Rubber

Respiratory Protection : If engineering controls do not maintain airborne concentrations to a level that is
adequate to protect worker health, an approved respirator must be worn.
Respirator selection, use and maintenance should be in accordance with the
requirements of the OSHA RespiratoryProtectionStandard, 29 CFR 1910.134.

Types of respirator(s) to be considered in the selection process include :

For Mist : Air Purifying, R or P style NIOSH approved respirator.

For Vapors : Air Purifying, R or P style pre-filter & organic cartridge,

NIOSH approved respirator. Self-contained breathing apparatus for use in environments with unknown concentrations
or emergency situations.

SECTION 9: STABILITY AND REACTIVITY

CONDITIONS CONTRIBUTING TO INSTABILITY

• . Presence of incompatible materials

• . Product is considered stable.

• . Hazardous polymerisation will not occur.

 SECTION 10: TOXICOLOGICAL INFORMATIONS

ACCUTE HEALTH EFFECTS SWALLOWED

Considered an unlikely route of entry in commercial / industrial environments. The liquids is discomforting and toxic is
swallowed ingestion may result in nauseas, pain vomiting. Vomit entering the lungs by aspiration may cause potentially
lethal chemicals pneumonitis.

EYE

The liquid may produce eye discomfort and is capable of causing temporary impairment of vision and/or transient eye
inflammations, ulceration. The vapour is discomforting to the eyes. The materials may produce severe irritations to the
eye causing pronounced inflammation. Repeated or prolonged exposure to irritants may produce conjunctivitis.

SKIN

The liquid discomforting to the skin exposure is prolonged and may cause drying of the skin, which may lead to
dermatitis. The materials may skin irritations after prolonged or repeated exposure may produce on contact skin redness,
swelling, the production of vesicles, scaling and thickening of the skin.

INHALED

The vapor/mist is discomforting to the upper respiratory tracts and lungs. Inhalation hazards is increased at higher
temperatures. Inhalation of high concentrations of gas/vapor causes lungs irritations with coughing and nausea, central
nervous depression with headache and dizziness, slowing of reflexes, fatigue and incoordination. If exposure to highly
concentrated solvent atmosphere is prolonged this may leads to narcosis, unconsciousness, even coma and possible
death.

CHRONIC HEALTH EFFECTS

Principal routes of exposure are usually by inhalation of vapour/spray mist and skin contact with the materials. Chronic
solvent inhalation exposures may result in nervous system impairment and liver and blood changes.[PATTYS].
Prolonged or continuous skin contact with the liquid may cause defeating with drying, cracking, irritations and
dermatitis followings.

SECTION 11: ECOLOGICAL INFORMATION

There is no date available on the product itself. The product should be allowed to enter drains or water courses or be
deposited where it can affect ground or surface waters.

SECTION 12: DISPOSAL CONSIDERATIONS

. Consult manufacturer for recycling options and recycle where possible.

. Consult State Land Waste Management Authority for disposal.

. Incinerate residue at an approved site.

. Recycle containers if possible, or dispose of in an authorised landfill.

 SECTION 13: TRANSPORT INFORMATIONS

ADR

This material is not classified as dangerous under ADR regulations.

RID

This material is not classified as dangerous under RID regulations.

ADNR

This material is not classified as dangerous under ADNR regulations.

IMDG

This material is not classified as dangerous under IMDG regulations

IATA(Country variations may apply)

This material is not classified as dangerous under IATA regulations

SECTION 14: REGULATORY INFORMATIONS

The regulatory information is not intended to be comprehensive. Other regulations may apply to this material.

EC Classification : Not classified as dangerous under EC criteria.

EC Symbols : No Hazard Symbol required

EC Risk Phrases : Not classified

EC Safety Phrases : Not classified

EINECS : All components listed or polymer exempt.

TSCA : All components listed

Other Information

Environmental Protection Act 1990 (as amended). Health & Safety at Work Act 1974. Consumer Protection Act 1987.
Control of Pollution Act 1974. Environmental Act 1995. Factories Act 1961. Carriage of Dangerous Goods by Road and
Rail (Classification, Packaging and Labelling)Regulations.Chemicals (Hazard Information and Packaging for Supply)
Regulations 2002. Control of Substances Hazardous to Health Regulations 1994 (as amended). Road Traffic (Carriage
of Dangerous Substances in Packages) Regulations. Merchant Shipping (Dangerous Goods and Marine Pollutants)
Regulations. Road Traffic (Carriage of Dangerous Substances in Road Tankers in Tank Containers) Regulations. Road
Traffic (Training of Drivers of Vehicles Carrying Dangerous Goods) Regulations. Reporting of Injuries, Diseases and
Dangerous Occurrences Regulations. Health and safety (First Aid) Regulations 1981. Personal Protective Equipment
(EC directive) Regulations 1992. Personal Protective Equipment at Work Regulations 1992.
--------------------------------------------------------------------------------------------------------------